[PATCH 06/16] ARM: shmobile: lager-reference: Add DU device
Simon Horman
horms+renesas at verge.net.au
Fri Feb 21 01:12:18 EST 2014
From: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
The DU device has no DT bindings yet, instantiate it as a platform
device for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Acked-by: Magnus Damm <damm at opensource.se>
[horms+renesas at verge.net.au: omitted DTS portion]
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/mach-shmobile/board-lager-reference.c | 66 ++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 634ef15..6ba8b3b 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -20,13 +20,72 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
#include <mach/common.h>
+#include <mach/irqs.h>
#include <mach/rcar-gen2.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+ {
+ .type = RCAR_DU_ENCODER_VGA,
+ .output = RCAR_DU_OUTPUT_DPAD0,
+ }, {
+ .type = RCAR_DU_ENCODER_NONE,
+ .output = RCAR_DU_OUTPUT_LVDS1,
+ .connector.lvds.panel = {
+ .width_mm = 210,
+ .height_mm = 158,
+ .mode = {
+ .clock = 65000,
+ .hdisplay = 1024,
+ .hsync_start = 1048,
+ .hsync_end = 1184,
+ .htotal = 1344,
+ .vdisplay = 768,
+ .vsync_start = 771,
+ .vsync_end = 777,
+ .vtotal = 806,
+ .flags = 0,
+ },
+ },
+ },
+};
+
+static struct rcar_du_platform_data lager_du_pdata = {
+ .encoders = lager_du_encoders,
+ .num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+ DEFINE_RES_MEM(0xfeb00000, 0x70000),
+ DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+ DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+ DEFINE_RES_IRQ(gic_spi(256)),
+ DEFINE_RES_IRQ(gic_spi(268)),
+ DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
+{
+ struct platform_device_info info = {
+ .name = "rcar-du-r8a7790",
+ .id = -1,
+ .res = du_resources,
+ .num_res = ARRAY_SIZE(du_resources),
+ .data = &lager_du_pdata,
+ .size_data = sizeof(lager_du_pdata),
+ .dma_mask = DMA_BIT_MASK(32),
+ };
+
+ platform_device_register_full(&info);
+}
+
static void __init lager_add_standard_devices(void)
{
#ifdef CONFIG_COMMON_CLK
@@ -50,6 +109,11 @@ static void __init lager_add_standard_devices(void)
{ "scif1", NULL, "sh-sci.7" },
{ "hscif0", NULL, "sh-sci.8" },
{ "hscif1", NULL, "sh-sci.9" },
+ { "du0", "du.0", "rcar-du-r8a7790" },
+ { "du1", "du.1", "rcar-du-r8a7790" },
+ { "du2", "du.2", "rcar-du-r8a7790" },
+ { "lvds0", "lvds.0", "rcar-du-r8a7790" },
+ { "lvds1", "lvds.1", "rcar-du-r8a7790" },
};
struct clk *clk;
unsigned int i;
@@ -68,6 +132,8 @@ static void __init lager_add_standard_devices(void)
r8a7790_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ lager_add_du_device();
}
static const char *lager_boards_compat_dt[] __initdata = {
--
1.8.5.2
More information about the linux-arm-kernel
mailing list