[PATCH 14/17] ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi

[Simon Horman]

From: Valentine Barshak <valentine.barshak at cogentembedded.com>

This adds SATA[01] device nodes to r8a7790.dtsi

Signed-off-by: Valentine Barshak <valentine.barshak at cogentembedded.com>
Acked-by: Magnus Damm <damm at opensource.se>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 8cc68f7..0914921 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -400,6 +400,24 @@
 		status = "disabled";
 	};
 
+	sata0: sata at ee300000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata at ee500000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2