[PATCH 1/2] CLK: TI: OMAP4: Remove gpmc_fck from dummy clocks

[Florian Vaussard]

When arch/arm/mach-omap2/gpmc.c calls clk_get(..., "fck"), it will
get a dummy clock and try to use it. As the rate is configured to zero,
this will result in several divisions by zero, and misconfigured
timings, with devices on the bus being lost in the La La Land.

It is better to remove gpmc_fck from the dummy clocks, so that gpmc.c
can fail gracefully.

Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
---
 drivers/clk/ti/clk-44xx.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
index ae00218..02517a8 100644
--- a/drivers/clk/ti/clk-44xx.c
+++ b/drivers/clk/ti/clk-44xx.c
@@ -222,7 +222,6 @@ static struct ti_dt_clk omap44xx_clks[] = {
 	DT_CLK(NULL, "auxclk5_src_ck", "auxclk5_src_ck"),
 	DT_CLK(NULL, "auxclk5_ck", "auxclk5_ck"),
 	DT_CLK(NULL, "auxclkreq5_ck", "auxclkreq5_ck"),
-	DT_CLK("50000000.gpmc", "fck", "dummy_ck"),
 	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
 	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
 	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
-- 
1.8.1.2