[PATCH 1/2] PM / OPP: Add support for 'boost' mode OPP

Nishanth Menon nm at ti.com
Tue Feb 4 11:51:49 EST 2014


On 02/04/2014 09:59 AM, Thomas Abraham wrote:
> On Tue, Feb 4, 2014 at 8:45 PM, Nishanth Menon <nm at ti.com> wrote:
>> On 02/04/2014 03:41 AM, Thomas Abraham wrote:
>>> From: Thomas Abraham <thomas.ab at samsung.com>
>>>
>>> Commit 6f19efc0 ("cpufreq: Add boost frequency support in core") adds
>>> support for CPU boost mode. This patch adds support for finding available
>>> boost OPPs from device tree and marking them as usable in boost mode.
>>>
>>> Cc: Nishanth Menon <nm at ti.com>
>>> Cc: Lukasz Majewski <l.majewski at samsung.com>
>>> Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
>>> ---
>>
>> Why is a cpufreq feature being pushed on to OPP library? you can very
>> well have a property boot-frequencies = < a b c > and be done with the
>> job.
> 
> The boost-opp was not limited to be a cpu/cpufreq only feature. Any
> device (such as a bus) which has OPPs and if it can support optional
> boost OPPs, can utilize this feature. The boost OPPs also require a
> voltage to be associated with the frequency and hence the binding
> boost-frequencies would not be suffice. The code changes in this patch
> also do not have anything that is cpufreq specific.
> 
if we have
operating-points = < Fa Va
	Fb Vb
	Fc Vc
	Fd Vd
	>;
boost-frequencies = <Fc Fd>;
you can easily pick up the voltages from the table.

The point being - there does not seem to be a need to modify the
existing definitions to introduce new OPP definitions.

a way to flip this over is to consider iMX6(see
arch/arm/mach-imx/mach-imx6q.) where OPP tuple <Fd Vd> can only be
enabled *iff* efuse register x has bit y set.

Would we want to introduce efuse offsets into OPP definitions? into
something like additional field definition 'efuse_controlled'?


>>
>> I agree with Rob's comment that this is something we have to discuss
>> in wider "add features to an OPP" discussion[1].
> 
> Okay. I have read through the discussion in [1]. Thanks for the link.
> Assuming that the current OPP tuple format will not change, I do not
> feel the code changes in this patch will be hinder the outcome of the
> discussion in [1].

The context of that discussion is to consider what is the data form we
consider OPP as? should we consider OPP as a data that is extensible
(as in phandle with properties that we add on) OR should we consider
key, value pair which provides a key (frequency) into another table
for other data (like efuse bit map, boost set etc..).

Both approaches I mentioned will work, and will take additional code
to make it happen. But having custom properties like this limits
extensibility - that is not scalable for other property definitions
we'd like to make in the future.

> 
> Regards,
> Thomas.
> 
>>
>>
>> [1] http://marc.info/?t=139108946400001&r=1&w=2
>>
>>>  drivers/base/power/opp.c |   69 +++++++++++++++++++++++++++++++++++++---------
>>>  1 file changed, 56 insertions(+), 13 deletions(-)
>>>
>>> diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
>>> index 2553867..de4d52d 100644
>>> --- a/drivers/base/power/opp.c
>>> +++ b/drivers/base/power/opp.c
>>> @@ -62,6 +62,7 @@ struct dev_pm_opp {
>>>       struct list_head node;
>>>
>>>       bool available;
>>> +     bool boost;
>>>       unsigned long rate;
>>>       unsigned long u_volt;
>>>
>>> @@ -380,10 +381,12 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
>>>  EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
>>>
>>>  /**
>>> - * dev_pm_opp_add()  - Add an OPP table from a table definitions
>>> + * dev_pm_opp_add_flags()  - Add an OPP to device OPP list with flags
>>>   * @dev:     device for which we do this operation
>>>   * @freq:    Frequency in Hz for this OPP
>>>   * @u_volt:  Voltage in uVolts for this OPP
>>> + * @available:       initial availability of the OPP with adding it to the list.
>>> + * @boost:   availability of this opp in controller's boost operating mode.
>>>   *
>>>   * This function adds an opp definition to the opp list and returns status.
>>>   * The opp is made available by default and it can be controlled using
>>> @@ -395,7 +398,8 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
>>>   * that this function is *NOT* called under RCU protection or in contexts where
>>>   * mutex cannot be locked.
>>>   */
>>> -int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
>>> +static int dev_pm_opp_add_flags(struct device *dev, unsigned long freq,
>>> +                     unsigned long u_volt, bool available, bool boost)
>>>  {
>>>       struct device_opp *dev_opp = NULL;
>>>       struct dev_pm_opp *opp, *new_opp;
>>> @@ -441,7 +445,8 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
>>>       new_opp->dev_opp = dev_opp;
>>>       new_opp->rate = freq;
>>>       new_opp->u_volt = u_volt;
>>> -     new_opp->available = true;
>>> +     new_opp->available = available;
>>> +     new_opp->boost = boost;
>>>
>>>       /* Insert new OPP in order of increasing frequency */
>>>       head = &dev_opp->opp_list;
>>> @@ -462,6 +467,27 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
>>>       srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_ADD, new_opp);
>>>       return 0;
>>>  }
>>> +
>>> +/**
>>> + * dev_pm_opp_add()  - Add an OPP table from a table definitions
>>> + * @dev:     device for which we do this operation
>>> + * @freq:    Frequency in Hz for this OPP
>>> + * @u_volt:  Voltage in uVolts for this OPP
>>> + *
>>> + * This function adds an opp definition to the opp list and returns status.
>>> + * The opp is made available by default and it can be controlled using
>>> + * dev_pm_opp_enable/disable functions.
>>> + *
>>> + * Locking: The internal device_opp and opp structures are RCU protected.
>>> + * Hence this function internally uses RCU updater strategy with mutex locks
>>> + * to keep the integrity of the internal data structures. Callers should ensure
>>> + * that this function is *NOT* called under RCU protection or in contexts where
>>> + * mutex cannot be locked.
>>> + */
>>> +int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
>>> +{
>>> +     return dev_pm_opp_add_flags(dev, freq, u_volt, true, false);
>>> +}
>>>  EXPORT_SYMBOL_GPL(dev_pm_opp_add);
>>>
>>>  /**
>>> @@ -651,7 +677,8 @@ int dev_pm_opp_init_cpufreq_table(struct device *dev,
>>>
>>>       list_for_each_entry(opp, &dev_opp->opp_list, node) {
>>>               if (opp->available) {
>>> -                     freq_table[i].driver_data = i;
>>> +                     freq_table[i].driver_data =
>>> +                             opp->boost ? CPUFREQ_BOOST_FREQ : i;
>>>                       freq_table[i].frequency = opp->rate / 1000;
>>>                       i++;
>>>               }
>>> @@ -701,19 +728,14 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev)
>>>  }
>>>
>>>  #ifdef CONFIG_OF
>>> -/**
>>> - * of_init_opp_table() - Initialize opp table from device tree
>>> - * @dev:     device pointer used to lookup device OPPs.
>>> - *
>>> - * Register the initial OPP table with the OPP library for given device.
>>> - */
>>> -int of_init_opp_table(struct device *dev)
>>> +static int of_parse_opp_table(struct device *dev, const char *prop_name,
>>> +                                     bool boost)
>>>  {
>>>       const struct property *prop;
>>>       const __be32 *val;
>>>       int nr;
>>>
>>> -     prop = of_find_property(dev->of_node, "operating-points", NULL);
>>> +     prop = of_find_property(dev->of_node, prop_name, NULL);
>>>       if (!prop)
>>>               return -ENODEV;
>>>       if (!prop->value)
>>> @@ -734,7 +756,7 @@ int of_init_opp_table(struct device *dev)
>>>               unsigned long freq = be32_to_cpup(val++) * 1000;
>>>               unsigned long volt = be32_to_cpup(val++);
>>>
>>> -             if (dev_pm_opp_add(dev, freq, volt)) {
>>> +             if (dev_pm_opp_add_flags(dev, freq, volt, true, boost)) {
>>>                       dev_warn(dev, "%s: Failed to add OPP %ld\n",
>>>                                __func__, freq);
>>>                       continue;
>>> @@ -744,5 +766,26 @@ int of_init_opp_table(struct device *dev)
>>>
>>>       return 0;
>>>  }
>>> +
>>> +/**
>>> + * of_init_opp_table() - Initialize opp table from device tree
>>> + * @dev:     device pointer used to lookup device OPPs.
>>> + *
>>> + * Register the initial OPP table with the OPP library for given device.
>>> + * Additional "boost" operating points of the controller, if any, are
>>> + * specified with "boost-opp" property.
>>> + */
>>> +int of_init_opp_table(struct device *dev)
>>> +{
>>> +     int ret;
>>> +
>>> +     ret = of_parse_opp_table(dev, "operating-points", false);
>>> +     if (!ret) {
>>> +             ret = of_parse_opp_table(dev, "boost-opp", true);
>>> +             if (ret == -ENODEV)
>>> +                     ret = 0;
>>> +     }
>>> +     return ret;
>>> +}
>>>  EXPORT_SYMBOL_GPL(of_init_opp_table);
>>>  #endif
>>>
>>
>>
>> --
>> Regards,
>> Nishanth Menon


-- 
Regards,
Nishanth Menon



More information about the linux-arm-kernel mailing list