[PATCH 15/21] ARM: MVEBU: Let kirkwood use the system controller for restart

[Andrew Lunn]

The mvebu system controller already supports restarting orion
systems. Make use of it, rather than the kirkwood specific code.

Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
 arch/arm/boot/dts/kirkwood.dtsi |  5 +++++
 arch/arm/mach-mvebu/kirkwood.c  | 20 ++------------------
 2 files changed, 7 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 1d8129ac2672..6c4028e410fa 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -145,6 +145,11 @@
 			reg = <0x20000 0x80>, <0x1500 0x20>;
 		};
 
+		system-controller at 20000 {
+			compatible = "marvell,orion-system-controller";
+			reg = <0x20000 0x120>;
+		};
+
 		bridge_intc: bridge-interrupt-ctrl at 20110 {
 			compatible = "marvell,orion-bridge-intc";
 			interrupt-controller;
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 56e83035bc97..af77923a3483 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -27,6 +27,7 @@
 #include <plat/common.h>
 #include <plat/pcie.h>
 #include "kirkwood-pm.h"
+#include "common.h"
 
 static struct resource kirkwood_cpufreq_resources[] = {
 	[0] = {
@@ -68,23 +69,6 @@ static void __init kirkwood_cpuidle_init(void)
 	platform_device_register(&kirkwood_cpuidle);
 }
 
-/* Temporary here since mach-mvebu has a function we can use */
-static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
 #define MV643XX_ETH_MAC_ADDR_LOW	0x0414
 #define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
 
@@ -203,6 +187,6 @@ static const char * const kirkwood_dt_board_compat[] = {
 DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
 	/* Maintainer: Jason Cooper <jason at lakedaemon.net> */
 	.init_machine	= kirkwood_dt_init,
-	.restart	= kirkwood_restart,
+	.restart	= mvebu_restart,
 	.dt_compat	= kirkwood_dt_board_compat,
 MACHINE_END
-- 
1.8.5.3