[PATCH 0/6] BCM59056 PMU regulator support

[Matt Porter]

The BCM59056 is a multi-function power management unit used with the
BCM281xx family of SoCs. This series adds an MFD and voltage regulator
driver to support the BCM59056. The bcm28155-ap DT support is updated
to enable use of regulators on the otg and sdhci peripherals.

Matt Porter (6):
  i2c: bcm-kona: register with subsys_initcall
  regulator: add bcm59056 pmu DT binding
  mfd: add bcm59056 pmu driver
  regulator: add bcm59056 regulator driver
  ARM: configs: bcm_defconfig: enable bcm59056 regulator support
  ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap

 .../devicetree/bindings/regulator/bcm59056.txt     |  37 ++
 arch/arm/boot/dts/bcm28155-ap.dts                  |  41 ++
 arch/arm/boot/dts/bcm59056.dtsi                    | 158 ++++++++
 arch/arm/configs/bcm_defconfig                     |   7 +
 drivers/i2c/busses/i2c-bcm-kona.c                  |  14 +-
 drivers/mfd/Kconfig                                |   8 +
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/bcm59056.c                             | 119 ++++++
 drivers/regulator/Kconfig                          |   8 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/bcm59056-regulator.c             | 445 +++++++++++++++++++++
 include/linux/mfd/bcm59056.h                       |  35 ++
 12 files changed, 873 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt
 create mode 100644 arch/arm/boot/dts/bcm59056.dtsi
 create mode 100644 drivers/mfd/bcm59056.c
 create mode 100644 drivers/regulator/bcm59056-regulator.c
 create mode 100644 include/linux/mfd/bcm59056.h

-- 
1.8.4