[Patch v3 15/23] ARM: Move kirkwood DT boards into mach-mvebu
Andrew Lunn
andrew at lunn.ch
Wed Feb 19 09:12:46 EST 2014
Move the kirkwood DT support into mach-mvebu, and make them part of
ARCH_MULTI_V5. Minimal changes have been made in order to make it
boot. Cleanup of the header files and integration with mvebu will
take place in following patches.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Acked-by: Arnd Bergmann <arnd at arndb.de>
---
arch/arm/boot/dts/Makefile | 34 ++--
arch/arm/mach-mvebu/Kconfig | 24 ++-
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/include/mach/bridge-regs.h | 85 ++++++++++
arch/arm/mach-mvebu/include/mach/kirkwood.h | 142 +++++++++++++++++
arch/arm/mach-mvebu/kirkwood-pm.c | 76 +++++++++
arch/arm/mach-mvebu/kirkwood-pm.h | 26 +++
arch/arm/mach-mvebu/kirkwood.c | 209 +++++++++++++++++++++++++
8 files changed, 579 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/mach-mvebu/include/mach/bridge-regs.h
create mode 100644 arch/arm/mach-mvebu/include/mach/kirkwood.h
create mode 100644 arch/arm/mach-mvebu/kirkwood-pm.c
create mode 100644 arch/arm/mach-mvebu/kirkwood-pm.h
create mode 100644 arch/arm/mach-mvebu/kirkwood.c
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b485e0..c0253830c7db 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -82,7 +82,23 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
+dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
+dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-apq8074-dragonboard.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
+ armada-370-mirabox.dtb \
+ armada-370-netgear-rn102.dtb \
+ armada-370-netgear-rn104.dtb \
+ armada-370-rd.dtb \
+ armada-xp-axpwifiap.dtb \
+ armada-xp-db.dtb \
+ armada-xp-gp.dtb \
+ armada-xp-netgear-rn2120.dtb \
+ armada-xp-matrix.dtb \
+ armada-xp-openblocks-ax3-4.dtb \
+ kirkwood-cloudbox.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
kirkwood-dns320.dtb \
@@ -116,22 +132,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-topkick.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
-dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
-dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
- armada-370-mirabox.dtb \
- armada-370-netgear-rn102.dtb \
- armada-370-netgear-rn104.dtb \
- armada-370-rd.dtb \
- armada-xp-axpwifiap.dtb \
- armada-xp-db.dtb \
- armada-xp-gp.dtb \
- armada-xp-netgear-rn2120.dtb \
- armada-xp-matrix.dtb \
- armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += \
imx25-karo-tx25.dtb \
imx25-pdk.dtb \
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 9ab22e1b26cd..2afbd59cad5e 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,5 +1,5 @@
config ARCH_MVEBU
- bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+ bool "Marvell SOCs with Device Tree support" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select COMMON_CLK
@@ -46,6 +46,28 @@ config MACH_ARMADA_XP
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada XP SoC with device tree.
+config MACH_KIRKWOOD
+ bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+ select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
+ select KIRKWOOD_CLK
+ select OF_IRQ
+ select ORION_IRQCHIP
+ select ORION_TIMER
+ select PCI
+ select PCI_QUIRKS
+ select PINCTRL_KIRKWOOD
+ select POWER_SUPPLY
+ select POWER_RESET
+ select POWER_RESET_GPIO
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
+ select USE_OF
+ help
+ Say 'Y' here if you want your kernel to support boards based
+ on the Marvell Kirkwood device tree.
+
endmenu
endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 878aebe98dcc..c44976470ccf 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
\ No newline at end of file
diff --git a/arch/arm/mach-mvebu/include/mach/bridge-regs.h b/arch/arm/mach-mvebu/include/mach/bridge-regs.h
new file mode 100644
index 000000000000..6eb8fea1f76f
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/bridge-regs.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-mvebu/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
+#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
+#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
+#define CPU_RESET 0x00000002
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
+
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
+
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
+#define CGC_BIT_GE0 (0)
+#define CGC_BIT_PEX0 (2)
+#define CGC_BIT_USB0 (3)
+#define CGC_BIT_SDIO (4)
+#define CGC_BIT_TSU (5)
+#define CGC_BIT_DUNIT (6)
+#define CGC_BIT_RUNIT (7)
+#define CGC_BIT_XOR0 (8)
+#define CGC_BIT_AUDIO (9)
+#define CGC_BIT_SATA0 (14)
+#define CGC_BIT_SATA1 (15)
+#define CGC_BIT_XOR1 (16)
+#define CGC_BIT_CRYPTO (17)
+#define CGC_BIT_PEX1 (18)
+#define CGC_BIT_GE1 (19)
+#define CGC_BIT_TDM (20)
+#define CGC_GE0 (1 << 0)
+#define CGC_PEX0 (1 << 2)
+#define CGC_USB0 (1 << 3)
+#define CGC_SDIO (1 << 4)
+#define CGC_TSU (1 << 5)
+#define CGC_DUNIT (1 << 6)
+#define CGC_RUNIT (1 << 7)
+#define CGC_XOR0 (1 << 8)
+#define CGC_AUDIO (1 << 9)
+#define CGC_POWERSAVE (1 << 11)
+#define CGC_SATA0 (1 << 14)
+#define CGC_SATA1 (1 << 15)
+#define CGC_XOR1 (1 << 16)
+#define CGC_CRYPTO (1 << 17)
+#define CGC_PEX1 (1 << 18)
+#define CGC_GE1 (1 << 19)
+#define CGC_TDM (1 << 20)
+#define CGC_RESERVED (0x6 << 21)
+
+#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
+#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
+
+#endif
diff --git a/arch/arm/mach-mvebu/include/mach/kirkwood.h b/arch/arm/mach-mvebu/include/mach/kirkwood.h
new file mode 100644
index 000000000000..9d966dc78d67
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/kirkwood.h
@@ -0,0 +1,142 @@
+/*
+ * arch/arm/mach-mvebu/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000 PCIe #0 Memory space
+ * e8000000 PCIe #1 Memory space
+ * f1000000 on-chip peripheral registers
+ * f2000000 PCIe #0 I/O space
+ * f3000000 PCIe #1 I/O space
+ * f4000000 NAND controller address window
+ * f5000000 Security Accelerator SRAM
+ *
+ * virt phys size
+ * fed00000 f1000000 1M on-chip peripheral registers
+ * fee00000 f2000000 1M PCIe #0 I/O space
+ * fef00000 f3000000 1M PCIe #1 I/O space
+ */
+
+#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
+#define KIRKWOOD_SRAM_SIZE SZ_2K
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
+#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
+
+#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
+#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
+#define KIRKWOOD_REGS_SIZE SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
+
+#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
+#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
+#define DDR_WINDOW_CPU_SZ (0x20)
+#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
+#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
+#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
+#define BRIDGE_WINS_SZ (0x80)
+
+#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
+
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID 0x6281
+#define MV88F6281_REV_Z0 0
+#define MV88F6281_REV_A0 2
+#define MV88F6281_REV_A1 3
+
+#define MV88F6192_DEV_ID 0x6192
+#define MV88F6192_REV_Z0 0
+#define MV88F6192_REV_A0 2
+#define MV88F6192_REV_A1 3
+
+#define MV88F6180_DEV_ID 0x6180
+#define MV88F6180_REV_A0 2
+#define MV88F6180_REV_A1 3
+
+#define MV88F6282_DEV_ID 0x6282
+#define MV88F6282_REV_A0 0
+#define MV88F6282_REV_A1 1
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c
new file mode 100644
index 000000000000..b8c8365b84d8
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.c
@@ -0,0 +1,76 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel at free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot at lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+
+static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
+
+static void kirkwood_low_power(void)
+{
+ u32 mem_pm_ctrl;
+
+ mem_pm_ctrl = readl(memory_pm_ctrl);
+
+ /* Set peripherals to low-power mode */
+ writel_relaxed(~0, memory_pm_ctrl);
+
+ /* Set DDR in self-refresh */
+ writel_relaxed(0x7, ddr_operation_base);
+
+ /*
+ * Set CPU in wait-for-interrupt state.
+ * This disables the CPU core clocks,
+ * the array clocks, and also the L2 controller.
+ */
+ cpu_do_idle();
+
+ writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ kirkwood_low_power();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+ return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+ .enter = kirkwood_suspend_enter,
+ .valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+ ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+ memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
+ suspend_set_ops(&kirkwood_suspend_ops);
+ return 0;
+}
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h
new file mode 100644
index 000000000000..21e7530f368b
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.h
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel at free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot at lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
new file mode 100644
index 000000000000..6e754a38f418
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason at lakedaemon.net>
+ *
+ * arch/arm/mach-mvebu/kirkwood.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqchip.h>
+#include <linux/kexec.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/bridge-regs.h>
+#include <plat/common.h>
+#include <plat/pcie.h>
+#include "kirkwood-pm.h"
+
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+ struct device_node *np;
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by u-boot
+ * if the clocks are turned off. Usually, u-boot on kirkwood boards
+ * has no DT support to properly set local-mac-address property.
+ * As a workaround, we get the MAC address from mv643xx_eth registers
+ * and update the port device node if no valid MAC address is set.
+ */
+ for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+ struct device_node *pnp = of_get_parent(np);
+ struct clk *clk;
+ struct property *pmac;
+ void __iomem *io;
+ u8 *macaddr;
+ u32 reg;
+
+ if (!pnp)
+ continue;
+
+ /* skip disabled nodes or nodes with valid MAC address*/
+ if (!of_device_is_available(pnp) || of_get_mac_address(np))
+ goto eth_fixup_skip;
+
+ clk = of_clk_get(pnp, 0);
+ if (IS_ERR(clk))
+ goto eth_fixup_skip;
+
+ io = of_iomap(pnp, 0);
+ if (!io)
+ goto eth_fixup_no_map;
+
+ /* ensure port clock is not gated to not hang CPU */
+ clk_prepare_enable(clk);
+
+ /* store MAC address register contents in local-mac-address */
+ pr_err(FW_INFO "%s: local-mac-address is not set\n",
+ np->full_name);
+
+ pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+ if (!pmac)
+ goto eth_fixup_no_mem;
+
+ pmac->value = pmac + 1;
+ pmac->length = 6;
+ pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!pmac->name) {
+ kfree(pmac);
+ goto eth_fixup_no_mem;
+ }
+
+ macaddr = pmac->value;
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+ macaddr[0] = (reg >> 24) & 0xff;
+ macaddr[1] = (reg >> 16) & 0xff;
+ macaddr[2] = (reg >> 8) & 0xff;
+ macaddr[3] = reg & 0xff;
+
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+ macaddr[4] = (reg >> 8) & 0xff;
+ macaddr[5] = reg & 0xff;
+
+ of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+ iounmap(io);
+ clk_disable_unprepare(clk);
+eth_fixup_no_map:
+ clk_put(clk);
+eth_fixup_skip:
+ of_node_put(pnp);
+ }
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+void kirkwood_disable_mbus_error_propagation(void)
+{
+ void __iomem *cpu_config;
+
+ cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+ writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+}
+
+
+static void __init kirkwood_dt_init(void)
+{
+ kirkwood_disable_mbus_error_propagation();
+
+ BUG_ON(mvebu_mbus_dt_init());
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_of_init();
+#endif
+ kirkwood_cpufreq_init();
+ kirkwood_cpuidle_init();
+
+ kirkwood_pm_init();
+ kirkwood_dt_eth_fixup();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] = {
+ "marvell,kirkwood",
+ NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+ /* Maintainer: Jason Cooper <jason at lakedaemon.net> */
+ .init_machine = kirkwood_dt_init,
+ .restart = kirkwood_restart,
+ .dt_compat = kirkwood_dt_board_compat,
+MACHINE_END
--
1.8.5.3
More information about the linux-arm-kernel
mailing list