[PATCH v3 08/20] ARM: shmobile: r8a7779: Reference clocks

[Laurent Pinchart]

Hi Simon,

Thank you for the patch.

On Wednesday 26 February 2014 16:33:24 Simon Horman wrote:
> Reference clocks using a "clocks" property in all nodes corresponding to
> devices that require a clock.
> 
> Based on work by Laurent Pinchart for the r8a7790 and r8a7791 SoC.
> 
> Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> v3
> * Also update the following nodes which are now present
>   - hspi{0,1,2}
>   - sata: Suggested by Laurent Pinchart
> ---
>  arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> index 240a03e..7352987 100644
> --- a/arch/arm/boot/dts/r8a7779.dtsi
> +++ b/arch/arm/boot/dts/r8a7779.dtsi
> @@ -166,6 +166,7 @@
>  		reg = <0xffc70000 0x1000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
>  		status = "disabled";
>  	};
> 
> @@ -176,6 +177,7 @@
>  		reg = <0xffc71000 0x1000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
>  		status = "disabled";
>  	};
> 
> @@ -186,6 +188,7 @@
>  		reg = <0xffc72000 0x1000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
>  		status = "disabled";
>  	};
> 
> @@ -196,6 +199,7 @@
>  		reg = <0xffc73000 0x1000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
>  		status = "disabled";
>  	};
> 
> @@ -214,6 +218,7 @@
>  		reg = <0xfc600000 0x2000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
>  	};
> 
>  	sdhi0: sd at ffe4c000 {
> @@ -221,6 +226,7 @@
>  		reg = <0xffe4c000 0x100>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
>  		cap-sd-highspeed;
>  		cap-sdio-irq;
>  		status = "disabled";
> @@ -231,6 +237,7 @@
>  		reg = <0xffe4d000 0x100>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
>  		cap-sd-highspeed;
>  		cap-sdio-irq;
>  		status = "disabled";
> @@ -241,6 +248,7 @@
>  		reg = <0xffe4e000 0x100>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
>  		cap-sd-highspeed;
>  		cap-sdio-irq;
>  		status = "disabled";
> @@ -251,6 +259,7 @@
>  		reg = <0xffe4f000 0x100>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
>  		cap-sd-highspeed;
>  		cap-sdio-irq;
>  		status = "disabled";
> @@ -261,6 +270,7 @@
>  		reg = <0xfffc7000 0x18>;
>  		interrupt-controller = <&gic>;
>  		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
>  		status = "disabled";
>  	};
> 
> @@ -269,6 +279,7 @@
>  		reg = <0xfffc8000 0x18>;
>  		interrupt-controller = <&gic>;
>  		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
>  		status = "disabled";
>  	};
> 
> @@ -277,6 +288,7 @@
>  		reg = <0xfffc6000 0x18>;
>  		interrupt-controller = <&gic>;
>  		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
>  		status = "disabled";
>  	};

-- 
Regards,

Laurent Pinchart