[PATCH 01/17] ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

The dts file has been superseded by r8a7791-koelsch.dts and been removed
from the ARCH_SHMOBILE_LEGACY dtb target. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch-reference.dts | 115 ------------------------
 1 file changed, 115 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7791-koelsch-reference.dts

diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
deleted file mode 100644
index 588ca17..0000000
--- a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch-reference", "renesas,r8a7791";
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory at 40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <30>;
-			label = "SW30";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <48>;
-			label = "SW31";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <46>;
-			label = "SW32";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <32>;
-			label = "SW33";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <18>;
-			label = "SW34";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <33>;
-			label = "SW35";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <34>;
-			label = "SW36";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
-	pinctrl-names = "default";
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
-	};
-};
-- 
1.8.5.2