[PATCH v4 20/22] ARM: config: Add a multi_v5_defconfig

[Andrew Lunn]

To allow regression build testing of multi v5 systems, add a
multi_v5_defconfig, similar to the multi_v7_defconfig. This is based
on kirkwood_defconfig, but with a few other boards added which claim
to be MULTI_v5.

Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Tested-by: Jason Gunthorpe <jgunthorpe at obsidianresearch.com>
---
v4
Disable low level debug
Enable more drivers needed by Kirkwood devices.
Ensure ORION_WATCHDOG is enabled.
---
 arch/arm/configs/multi_v5_defconfig | 185 ++++++++++++++++++++++++++++++++++++
 1 file changed, 185 insertions(+)
 create mode 100644 arch/arm/configs/multi_v5_defconfig

diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
new file mode 100644
index 000000000000..2bc1e1707930
--- /dev/null
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -0,0 +1,185 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_KIRKWOOD=y
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_IMX25_DT=y
+CONFIG_MACH_IMX27_DT=y
+CONFIG_ARCH_U300=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_KIRKWOOD_CPUIDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ORION=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_MV=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_MV643XX_ETH=y
+CONFIG_R8169=y
+CONFIG_MARVELL_PHY=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_NOMADIK=y
+CONFIG_SPI=y
+CONFIG_SPI_ORION=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_QNAP=y
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_LM63=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_LM85=y
+CONFIG_THERMAL=y
+CONFIG_KIRKWOOD_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
+# CONFIG_ABX500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_KIRKWOOD_SOC=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_MMC=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_S35390A=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+CONFIG_MV_XOR=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y
-- 
1.8.5.3