[GIT PULL] ARM: imx: device tree changes for 3.15, take 1
Shawn Guo
shawn.guo at linaro.org
Wed Feb 5 07:23:01 EST 2014
Hi arm-soc folks,
This is basically imx-dt-3.14 pull request that missed the 3.14 merge
window with the pingrp removal series applied on top of. It also
includes a few additional board support I collected since imx-dt-3.14.
There will be another round of IMX DT changes for 3.15 later, but this
one should be the majority. Please pull, thanks.
Shawn
The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
are available in the git repository at:
git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.15
for you to fetch changes up to 6e63728deb5340f6a4988d98ff86227abf62c81d:
ARM: dts: imx28-m28cu3: Remove 'reset-active-high' (2014-02-03 22:57:45 +0800)
----------------------------------------------------------------
i.MX device tree changes for 3.15:
- New SoC device tree support for imx35 and imx50.
- A good number of new i.MX6 boards support: SolidRun HummingBoard,
cm-fx6, dmo-edmqmx6, nitrogen6x, Gateworks Ventana gw5xxx family,
DFI FS700-M60 and Zealz GK802.
- A few other new i.MX boards support: imx25-eukrea, imx28-duckbill,
imx28-eukrea, Eukrea cpuimx35, imx50-evk, imx51-eukrea, imx53-voipac,
MCIMX53-START-R and Ka-Ro TX53.
- Add pinfunc headers for imx25, imx27 and imx50.
- Make pinctrl nodes board specific to avoid floating board specific
device tree blob with so many unused pinctrl data.
- Use clock defines in imx5 DTS files.
- Update imx6q-sabrelite device tree and add Dual Lite/Solo support.
- Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687
ENET: Only the ENET wake-up interrupt request can wake the system
from Wait mode.)
- A plenty of random updates on various SoC and board device tree
sources, adding pinctrl settings, device nodes, properties, etc.
----------------------------------------------------------------
Aida Mynzhasova (1):
ARM: dts: mxs: add auart2 pinmux to imx28.dtsi
Alexander Shiyan (26):
ARM: dts: i.MX51: Update CPU node
ARM: dts: i.MX51: Add dummy clock to AUDMUX
ARM: dts: i.MX51: Switch to use standard IRQ flags definitions
ARM: dts: i.MX51: Move usbphy0 node from AIPS1
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions
ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1
ARM: dts: imx51-babbage: Define FEC reset pin
ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT support
ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera module
ARM: dts: imx27-phytec-phycore-som: Update FEC node
ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions
ARM: dts: i.MX27: Configure GPIOs as "input" by default
ARM: dts: i.MX: Move include "imxXX-pinfunc.h" into "imxXX-pingrp.h"
ARM: dts: imx27-phytec-phycore-rdk: Change pinctrl settings for I2C1
ARM: dts: imx27-phytec-phycore-som: trivial: Typo fix
ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on module
ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsi
ARM: dts: imx27-phytec-phycore-som: Add NFC pin group
ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module
ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMIC
ARM: dts: i.MX27: Add missing pullup settings for SDHC pin groups
ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHC
ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIM
ARM: dts: i.MX27: Add SSI nodes
ARM: dts: imx53-evk: Remove board support
ARM: dts: i.MX51: Switch to use standard definitions for input subsystem
Alexandre Belloni (3):
ARM: dts: mxs: add #io-channel-cells to mx28 lradc
ARM: dts: mxs: Add iio-hwmon to mx28 soc
ARM: dts: mxs: Add iio-hwmon to mx23 soc
Anson Huang (7):
ARM: dts: imx6q: update setting of VDDARM_CAP voltage
ARM: dts: imx6q: add vddsoc/pu setpoint info
ARM: dts: imx6dl: enable cpufreq support
ARM: dts: imx6qdl: add necessary thermal clk
ARM: dts: imx6qdl-sabresd: Add power key support
ARM: dts: imx6sl: add ocram device support
ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board.
Denis Carikli (15):
of: add vendor prefix for Eukrea Electromatique.
ARM: dts: i.MX25: Add ssi clocks and DMA events.
ARM: dts: i.MX25: Add sdma script path.
ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer.
ARM: dts: imx51.dtsi: Add some pinmux pins.
ARM: dts: Add support for the cpuimx51 board from Eukrea and its baseboard.
ARM: dts: imx25: Add pinctrl functions and groups.
ARM: dts: imx25.dtsi: label the iomuxc.
ARM: dts: mxs: Add 18bit pin config for lcdif.
ARM: dts: mxs: Add a new pin config for the usb0 ID.
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
ARM: dts: mbimxsd25: Add sound support.
ARM: dts: mbimxsd51: Add sound support.
ARM: dts: imx53: Add gpio and input dt includes.
ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
Eric Bénard (1):
ARM: mxs: Add support for the eukrea-cpuimx28.
Fabio Estevam (8):
ARM: dts: imx6q-udoo: Add Ethernet support
ARM: dts: imx6q-sabrelite: Remove duplicate GPIO entry
ARM: dts: imx6q-sabrelite: Place 'status' as the last node
ARM: dts: imx28-evk: Run I2C0 at 400kHz
ARM: dts: imx6: Use 'vddarm' as the regulator name
ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
ARM: dts: imx6qdl-sabreauto: Add LVDS support
ARM: dts: imx28-m28cu3: Remove 'reset-active-high'
Frank Li (1):
ARM: dts: imxqdl: enable dma for spi
Greg Ungerer (3):
ARM: dts: imx: add device tree pin definitions for the IMX50
ARM: dts: imx: add IMX50 SoC device tree
ARM: dts: imx: add device tree support for Freescale imx50evk board
Gwenhael Goavec-Merou (10):
ARM: imx27-apf27dev: Add sdhci support
ARM: dts: imx27-apf27dev: fix display size
ARM: imx27: add pingroups for cspi, sdhc and framebuffer
ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1
ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebuffer
ARM: dts: apf28dev: set gpio polarity for usb regulator and pinctrl for regulator gpio
ARM: imx28: add apf28 specific initialization (macaddr)
ARM: imx27: add pwm pingrp
ARM: dts: apf27dev: Add pwm support
ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys
Huang Shijie (1):
ARM: dts: vf610: use the interrupt macros
John Tobias (1):
ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table.
Lothar Waßmann (4):
ARM: dts: imx6qdl: add aliases for can interfaces
ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode
ARM: dts: imx6qdl: add new pingroup for audmux
ARM: dts: imx53: add support for Ka-Ro TX53 modules
Lucas Stach (3):
ARM: imx53: use clock defines in DTS files
ARM: imx51: use clock defines in DTS files
ARM: imx50: use clock defines in DTS files
Marek Vasut (6):
ARM: dts: imx53: Fix display pinmux for M53EVK
ARM: dts: imx53: Fix backlight for M53EVK
ARM: dts: imx53: Add USB support for M53EVK
ARM: dts: imx53: Add AHCI SATA DT node
ARM: dts: imx53: Enable AHCI SATA for M53EVK
ARM: dts: imx6q-sabrelite: Enable PCI express
Markus Pargmann (7):
ARM: dts: imx27 pin functions
ARM: dts: imx27 pingroups
ARM: dts: imx27 iomux device node
ARM: dts: imx27 phyCARD-S pinctrl
ARM: dts: imx27 phycore move uart1 to rdk
ARM: dts: imx27 phycore pinctrl
ARM: DTS: imx5* imx6*, use imx51-ssi
Maxime Ripard (2):
ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree
ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DT
Michael Grzeschik (1):
ARM: i.MX28: dts: rename usbphy pin names
Michael Heimpold (1):
ARM: mxs: add support for I2SE's duckbill series
Nicolin Chen (2):
ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000
ARM: dts: imx6qdl: add spdif support for sabreauto
Peter Chen (3):
ARM: dts: imx6q-arm2: enable USB OTG
ARM: dts: imx6: add anatop phandle for usbphy
ARM: dts: imx: add mxs phy controller id
Philipp Zabel (2):
ARM: dts: imx6q-sabrelite: PHY reset is active-low
ARM: dts: imx6: edmqmx6: add PF0100 PMIC to device tree
Robert Nelson (1):
ARM: dts: imx53: Enable AHCI SATA for imx53-qsb
Rostislav Lisovy (8):
ARM: dts: i.MX53: Add alternate pinmux option for i2c_3
ARM: dts: i.MX53: Internal keyboard controller
ARM: dts: Add vendor prefix for Voipac Technologies s.r.o.
ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module
ARM: dts: voipac: Improve fixed voltage regulator definition
ARM: i.MX53: dts: NAND flash controller
ARM: i.MX53: dts: USB host controller
Sascha Hauer (9):
ARM: dts: imx53: Add mmc aliases
ARM: dts: imx6q: Add spi4 alias
ARM: dts: imx6qdl: Add mmc aliases
ARM: dts: imx51: Add mmc aliases
ARM: dts: imx6: Add DFI FS700-M60 board support
ARM: dts: imx6: edmqmx6: Add usdhc4 (emmc) support
ARM: dts: imx6: edmqmx6: Add sata support
ARM: dts: imx6: edmqmx6: Add LED support
ARM: dts: imx6q: Add support for Zealz GK802
Shawn Guo (17):
ARM: dts: imx6qdl: make pinctrl nodes board specific
ARM: dts: imx6sl: make pinctrl nodes board specific
ARM: dts: imx53: make pinctrl nodes board specific
ARM: dts: imx51: make pinctrl nodes board specific
ARM: dts: imx50: make pinctrl nodes board specific
ARM: dts: imx53-mba53: create a container for fixed regulators
ARM: dts: imx: use generic node name for fixed regulator
ARM: dts: vf610: make pinctrl nodes board specific
ARM: dts: imx6qdl: remove the use of pingrp macros
ARM: dts: imx6sl: remove the use of pingrp macros
ARM: dts: imx53: remove the use of pingrp macros
ARM: dts: imx51: remove the use of pingrp macros
ARM: dts: imx50: remove the use of pingrp macros
ARM: dts: imx35: remove the use of pingrp macros
ARM: dts: imx25: remove the use of pingrp macros
ARM: dts: imx27: remove the use of pingrp macros
ARM: dts: vf610: remove the use of pingrp macros
Silvio F (2):
DT: Add Data Modul vendor prefix
ARM: dts: imx6: Add support for imx6q dmo edmqmx6
Steffen Trumtrar (3):
ARM: dts: Add support for the i.MX35.
ARM: i.MX53: dts: move common QSB nodes to new file
ARM: i.MX53: dts: add support for MCIMX53-START-R
Sébastien Szymanski (1):
ARM: dts: imx28-apf28dev: add user button
Tim Harvey (3):
ARM: dts: disable flexcan by default
ARM: dts: added several new imx-pinmux groups
ARM: dts: add Gateworks Ventana support
Troy Kisky (30):
ARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT
ARM: dts: imx: imx6qdl.dtsi: add mipi_csi tag
ARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH
ARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH
ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH
ARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH
ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
ARM: dts: imx6qdl-sabrelite: Add uart1 support
ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio
ARM: dts: imx6qdl-sabrelite: move pcie to imx6qdl-sabrelite.dtsi
ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4
ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3
ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1
ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg
ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet
ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk
ARM: dts: imx6qdl-sabrelite: add pwms for backlights
ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy
ARM: dts: imx6qdl-sabrelite: fix ENET group
ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg
ARM: dts: imx: add nitrogen6x board
ARM: dts: imx6qdl-sabrelite: add gpio-keys
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
ARM: dts: imx6qdl: add pingroups for enet with GPIO6 interrupt
ARM: dts: imx6qdl-sabrelite: use MX6QDL_ENET_PINGRP_RGMII_MD
ARM: dts: imx6qdl: use interrupts-extended for fec
ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.
ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.
ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.
Valentin Raevsky (1):
ARM: dts: Add initial support for cm-fx6.
.../devicetree/bindings/vendor-prefixes.txt | 3 +
arch/arm/boot/dts/Makefile | 30 +-
arch/arm/boot/dts/imx23-evk.dts | 8 +-
arch/arm/boot/dts/imx23-olinuxino.dts | 5 +-
arch/arm/boot/dts/imx23-stmp378x_devb.dts | 5 +-
arch/arm/boot/dts/imx23.dtsi | 8 +-
arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi | 73 ++
.../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 174 ++++
arch/arm/boot/dts/imx25-pinfunc.h | 494 +++++++++++
arch/arm/boot/dts/imx25.dtsi | 18 +-
arch/arm/boot/dts/imx27-apf27.dts | 38 +
arch/arm/boot/dts/imx27-apf27dev.dts | 149 +++-
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 61 +-
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 42 +-
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 97 +-
...ycore-som.dts => imx27-phytec-phycore-som.dtsi} | 95 +-
arch/arm/boot/dts/imx27-pinfunc.h | 526 +++++++++++
arch/arm/boot/dts/imx27.dtsi | 151 ++--
arch/arm/boot/dts/imx28-apf28dev.dts | 29 +-
arch/arm/boot/dts/imx28-apx4devkit.dts | 5 +-
arch/arm/boot/dts/imx28-cfa10036.dts | 2 +
arch/arm/boot/dts/imx28-cfa10037.dts | 7 +-
arch/arm/boot/dts/imx28-cfa10049.dts | 31 +-
arch/arm/boot/dts/imx28-cfa10057.dts | 7 +-
arch/arm/boot/dts/imx28-cfa10058.dts | 7 +-
arch/arm/boot/dts/imx28-duckbill.dts | 121 +++
arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts | 71 ++
arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts | 50 ++
arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi | 326 +++++++
arch/arm/boot/dts/imx28-evk.dts | 24 +-
arch/arm/boot/dts/imx28-m28cu3.dts | 17 +-
arch/arm/boot/dts/imx28-m28evk.dts | 18 +-
arch/arm/boot/dts/imx28-sps1.dts | 7 +-
arch/arm/boot/dts/imx28-tx28.dts | 23 +-
arch/arm/boot/dts/imx28.dtsi | 65 +-
arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 81 ++
.../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 143 +++
arch/arm/boot/dts/imx35.dtsi | 359 ++++++++
arch/arm/boot/dts/imx50-evk.dts | 119 +++
arch/arm/boot/dts/imx50-pinfunc.h | 923 +++++++++++++++++++
arch/arm/boot/dts/imx50.dtsi | 478 ++++++++++
arch/arm/boot/dts/imx51-apf51.dts | 40 +-
arch/arm/boot/dts/imx51-apf51dev.dts | 102 ++-
arch/arm/boot/dts/imx51-babbage.dts | 248 +++++-
arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi | 93 ++
.../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 174 ++++
arch/arm/boot/dts/imx51.dtsi | 459 ++--------
arch/arm/boot/dts/imx53-ard.dts | 33 +-
arch/arm/boot/dts/imx53-evk.dts | 126 ---
arch/arm/boot/dts/imx53-m53evk.dts | 233 ++++-
arch/arm/boot/dts/imx53-mba53.dts | 40 +-
arch/arm/boot/dts/imx53-qsb-common.dtsi | 336 +++++++
arch/arm/boot/dts/imx53-qsb.dts | 210 +----
arch/arm/boot/dts/imx53-qsrb.dts | 158 ++++
arch/arm/boot/dts/imx53-smd.dts | 119 ++-
arch/arm/boot/dts/imx53-tqma53.dtsi | 175 +++-
arch/arm/boot/dts/imx53-tx53-x03x.dts | 315 +++++++
arch/arm/boot/dts/imx53-tx53-x13x.dts | 243 +++++
arch/arm/boot/dts/imx53-tx53.dtsi | 511 ++++++++++-
arch/arm/boot/dts/imx53-voipac-bsb.dts | 159 ++++
arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 277 ++++++
arch/arm/boot/dts/imx53.dtsi | 663 +++-----------
arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts | 23 +
arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 +
arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 +
arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 +
arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 +
arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 21 +
arch/arm/boot/dts/imx6dl-pinfunc.h | 2 +
arch/arm/boot/dts/imx6dl-sabrelite.dts | 20 +
arch/arm/boot/dts/imx6dl.dtsi | 29 +-
arch/arm/boot/dts/imx6q-arm2.dts | 140 ++-
arch/arm/boot/dts/imx6q-cm-fx6.dts | 107 +++
arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts | 23 +
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 372 ++++++++
arch/arm/boot/dts/imx6q-gk802.dts | 171 ++++
arch/arm/boot/dts/imx6q-gw51xx.dts | 19 +
arch/arm/boot/dts/imx6q-gw52xx.dts | 23 +
arch/arm/boot/dts/imx6q-gw53xx.dts | 23 +
arch/arm/boot/dts/imx6q-gw5400-a.dts | 546 ++++++++++++
arch/arm/boot/dts/imx6q-gw54xx.dts | 23 +
arch/arm/boot/dts/imx6q-nitrogen6x.dts | 25 +
arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 85 +-
arch/arm/boot/dts/imx6q-pinfunc.h | 2 +
arch/arm/boot/dts/imx6q-sabrelite.dts | 178 +---
arch/arm/boot/dts/imx6q-sbc6x.dts | 58 +-
arch/arm/boot/dts/imx6q-udoo.dts | 54 +-
arch/arm/boot/dts/imx6q.dtsi | 21 +-
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 199 +++++
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 374 ++++++++
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 490 ++++++++++
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 553 ++++++++++++
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 580 ++++++++++++
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 422 +++++++++
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 246 ++++-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 423 +++++++++
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 272 +++++-
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 128 ++-
arch/arm/boot/dts/imx6qdl.dtsi | 938 +++-----------------
arch/arm/boot/dts/imx6sl-evk.dts | 210 ++++-
arch/arm/boot/dts/imx6sl.dtsi | 385 +++-----
arch/arm/boot/dts/vf610-cosmic.dts | 29 +-
arch/arm/boot/dts/vf610-twr.dts | 66 +-
arch/arm/boot/dts/vf610.dtsi | 207 +----
arch/arm/mach-mxs/mach-mxs.c | 33 +
105 files changed, 14073 insertions(+), 3127 deletions(-)
create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h
rename arch/arm/boot/dts/{imx27-phytec-phycore-som.dts => imx27-phytec-phycore-som.dtsi} (61%)
create mode 100644 arch/arm/boot/dts/imx27-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx28-duckbill.dts
create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
create mode 100644 arch/arm/boot/dts/imx35.dtsi
create mode 100644 arch/arm/boot/dts/imx50-evk.dts
create mode 100644 arch/arm/boot/dts/imx50-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx50.dtsi
create mode 100644 arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
delete mode 100644 arch/arm/boot/dts/imx53-evk.dts
create mode 100644 arch/arm/boot/dts/imx53-qsb-common.dtsi
create mode 100644 arch/arm/boot/dts/imx53-qsrb.dts
create mode 100644 arch/arm/boot/dts/imx53-tx53-x03x.dts
create mode 100644 arch/arm/boot/dts/imx53-tx53-x13x.dts
create mode 100644 arch/arm/boot/dts/imx53-voipac-bsb.dts
create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
create mode 100644 arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-nitrogen6x.dts
create mode 100644 arch/arm/boot/dts/imx6dl-sabrelite.dts
create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
create mode 100644 arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
create mode 100644 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
create mode 100644 arch/arm/boot/dts/imx6q-gk802.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6x.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
More information about the linux-arm-kernel
mailing list