[PATCH v2 2/5] clk: sun6i: Reparent AHB clock on PLL6

[Maxime Ripard]

In order for the DMA controller to work for SDRAM to devices transfers, the AHB
clock should be reparented on the PLL6.

Force that parenting in the clock driver.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 drivers/clk/sunxi/clk-sunxi.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index f6f61cc..a5c5882 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1286,7 +1286,7 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat
  */
 static void __init sunxi_clock_protect(void)
 {
-	struct clk *clk;
+	struct clk *clk, *parent;
 
 	/* memory bus clock - sun5i+ */
 	clk = clk_get(NULL, "mbus");
@@ -1307,6 +1307,22 @@ static void __init sunxi_clock_protect(void)
 	if (!IS_ERR(clk))
 		clk_prepare_enable(clk);
 
+	clk = clk_get(NULL, "ahb1_mux");
+	if (IS_ERR(clk)) {
+		pr_err("Couldn't get AHB1 Mux\n");
+		return;
+	}
+
+	parent = clk_get(NULL, "pll6");
+	if (IS_ERR(clk)) {
+		pr_err("Couldn't get PLL6\n");
+		return;
+	}
+
+	clk_set_parent(clk, parent);
+
+	clk_put(clk);
+	clk_put(parent);
 }
 
 static void __init sunxi_init_clocks(void)
-- 
1.9.0