[PATCH] ARM: EDMA: Use platform_get_resource functions for DT
Joel Fernandes
joelf at ti.com
Thu Feb 20 23:24:21 EST 2014
Currently, EDMA driver uses of_address_to_resource for getting Channel
controller and x-bar register resources. Use platform_get_resource_by_name
instead regardless of whether its DT-boot or not, document the new reg-names
properties.
Also, while at it get rid of the assumption in the code that "CC" is at reg
index 0 in the DT and xbar is at offset 1. Instead use reg-names to get the
memory resource in concern keeping things much cleaner and simpler. This also
makes it possible to have multiple channel controllers.
Signed-off-by: Joel Fernandes <joelf at ti.com>
---
Documentation/devicetree/bindings/dma/ti-edma.txt | 7 ++++++
arch/arm/boot/dts/am33xx.dtsi | 1 +
arch/arm/boot/dts/am4372.dtsi | 1 +
arch/arm/common/edma.c | 28 ++++++++++-----------
4 files changed, 22 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 9fbbdb7..176e42b 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -8,6 +8,12 @@ Required properties:
Clients should use a single channel number per DMA request.
- dma-channels: Specify total DMA channels per CC
- reg: Memory map for accessing module
+- reg-names: Since there can be different memory regions, each reg
+ entry should correspond to one of the following reg-names (X being 0 to N):
+ edma_ccX: memory map for Xth Channel Controller
+ edma_tcX: memory map for Xth Transfer Controller
+ Additionally there can be a memory map for xbar (in control module):
+ edma_xbar: memory map for xbar access.
- interrupt-parent: Interrupt controller the interrupt is routed through
- interrupts: Exactly 3 interrupts need to be specified in the order:
1. Transfer completion interrupt.
@@ -21,6 +27,7 @@ Example:
edma: edma at 49000000 {
reg = <0x49000000 0x10000>;
+ reg-names = "edma_cc0";
interrupt-parent = <&intc>;
interrupts = <12 13 14>;
compatible = "ti,edma3";
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 2b66e67..55f5723 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -123,6 +123,7 @@
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
reg = <0x49000000 0x10000>,
<0x44e10f90 0x10>;
+ reg-names = "edma_cc0", "edma_xbar";
interrupts = <12 13 14>;
#dma-cells = <1>;
dma-channels = <64>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index babdc84..1323a97 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -100,6 +100,7 @@
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
reg = <0x49000000 0x10000>,
<0x44e10f90 0x10>;
+ reg-names = "edma_cc0", "edma_xbar";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index dc95efc..ae0ccae 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -1458,10 +1458,11 @@ static int edma_xbar_event_map(struct device *dev,
struct edma_soc_info *pdata, int len)
{
int ret, i;
- struct resource res;
+ struct resource *res;
void __iomem *xbar;
const s16 (*xbar_chans)[2];
u32 shift, offset, mux;
+ struct platform_device *pdev;
xbar_chans = devm_kzalloc(dev,
len/sizeof(s16) + 2*sizeof(s16),
@@ -1469,11 +1470,14 @@ static int edma_xbar_event_map(struct device *dev,
if (!xbar_chans)
return -ENOMEM;
- ret = of_address_to_resource(node, 1, &res);
- if (ret)
+ pdev = to_platform_device(dev);
+ res = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM,
+ "edma_xbar");
+ if (!res)
return -EIO;
- xbar = devm_ioremap(dev, res.start, resource_size(&res));
+ xbar = devm_ioremap(dev, res->start, resource_size(res));
if (!xbar)
return -ENOMEM;
@@ -1614,7 +1618,6 @@ static int edma_probe(struct platform_device *pdev)
int irq[EDMA_MAX_CC] = {0, 0};
int err_irq[EDMA_MAX_CC] = {0, 0};
struct resource *r[EDMA_MAX_CC] = {NULL};
- struct resource res[EDMA_MAX_CC];
char res_name[10];
char irq_name[10];
struct device_node *node = pdev->dev.of_node;
@@ -1653,16 +1656,11 @@ static int edma_probe(struct platform_device *pdev)
return -ENODEV;
break;
}
- if (node) {
- ret = of_address_to_resource(node, j, &res[j]);
- if (!ret)
- r[j] = &res[j];
- } else {
- sprintf(res_name, "edma_cc%d", j);
- r[j] = platform_get_resource_byname(pdev,
- IORESOURCE_MEM,
- res_name);
- }
+
+ sprintf(res_name, "edma_cc%d", j);
+ r[j] = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM,
+ res_name);
if (!r[j]) {
if (found)
break;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list