[PATCH] net: phy: add suspend_halted module param

[Andrew Lunn]

On Mon, Feb 24, 2014 at 11:37:15AM -0800, Florian Fainelli wrote:
> 2014-02-24 11:15 GMT-08:00 Andrew Lunn <andrew at lunn.ch>:
> > On Sun, Feb 23, 2014 at 05:58:39PM +0100, Sebastian Hesselbarth wrote:
> >> commit 1211ce53077164e0d34641d0ca5fb4d4a7574498
> >>   ("net: phy: resume/suspend PHYs on attach/detach")
> >> introduced a feature to suspend PHYs when entering halted state.
> >>
> >> Unfortunately, not all bootloaders properly power-up PHYs on reset
> >> and fail to access ethernet because the PHY is still powered down.
> >>
> >> Therefore, we add a boolean module parameter suspend_halted with
> >> default value of true. Disabling that parameter prevents PHYs from
> >> being suspended when entering halted state.
> >
> > Hi Sebastian
> >
> > Am i doing something silly here?
> 
> Could the PHY be already suspended during your initial boot?

No. I tftpboot.

> If that
> is the case, the first time we all phy_suspend() the flag is true, we
> suspend it, and we never wake it again despite changing
> suspend_halted. Does it work better if you specify this module
> parameter on the initial kernel boot command-line?

I tried that as well, after i emailed. Makes no difference, no working
Ethernet.

	Andrew