[PATCH 07/10] pinctrl: mvebu: dove: use remapped mpp base registers

Sebastian Hesselbarth sebastian.hesselbarth at gmail.com
Mon Feb 24 03:42:59 EST 2014


Now that we have ioremapped mpp base registers, get rid of hardcoded
physical addresses. While at it, also remove DOVE_ prefix from those
macros.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
---
Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/pinctrl/mvebu/pinctrl-dove.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/pinctrl/mvebu/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c
index e4f954a78b15..902c18f11b94 100644
--- a/drivers/pinctrl/mvebu/pinctrl-dove.c
+++ b/drivers/pinctrl/mvebu/pinctrl-dove.c
@@ -31,9 +31,6 @@
 #define GC_REGS_OFFS		0xe802c
 
 #define DOVE_SB_REGS_VIRT_BASE		IOMEM(0xfde00000)
-#define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE + 0xd0200)
-#define DOVE_PMU_MPP_GENERAL_CTRL	(DOVE_MPP_VIRT_BASE + 0x10)
-#define  DOVE_AU0_AC97_SEL		BIT(16)
 #define DOVE_PMU_SIGNAL_SELECT_0	(DOVE_SB_REGS_VIRT_BASE + 0xd802C)
 #define DOVE_PMU_SIGNAL_SELECT_1	(DOVE_SB_REGS_VIRT_BASE + 0xd8030)
 #define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
@@ -57,6 +54,10 @@
 #define  DOVE_SD1_GPIO_SEL		BIT(1)
 #define  DOVE_SD0_GPIO_SEL		BIT(0)
 
+/* MPP Base registers */
+#define PMU_MPP_GENERAL_CTRL	0x10
+#define  AU0_AC97_SEL		BIT(16)
+
 #define CONFIG_PMU	BIT(4)
 
 static void __iomem *mpp_base;
@@ -78,7 +79,7 @@ static int dove_pmu_mpp_ctrl_get(unsigned pid, unsigned long *config)
 {
 	unsigned off = (pid / MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
 	unsigned shift = (pid % MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
-	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long pmu = readl(mpp_base + PMU_MPP_GENERAL_CTRL);
 	unsigned long func;
 
 	if ((pmu & BIT(pid)) == 0)
@@ -95,15 +96,15 @@ static int dove_pmu_mpp_ctrl_set(unsigned pid, unsigned long config)
 {
 	unsigned off = (pid / MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
 	unsigned shift = (pid % MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
-	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long pmu = readl(mpp_base + PMU_MPP_GENERAL_CTRL);
 	unsigned long func;
 
 	if ((config & CONFIG_PMU) == 0) {
-		writel(pmu & ~BIT(pid), DOVE_PMU_MPP_GENERAL_CTRL);
+		writel(pmu & ~BIT(pid), mpp_base + PMU_MPP_GENERAL_CTRL);
 		return default_mpp_ctrl_set(mpp_base, pid, config);
 	}
 
-	writel(pmu | BIT(pid), DOVE_PMU_MPP_GENERAL_CTRL);
+	writel(pmu | BIT(pid), mpp_base + PMU_MPP_GENERAL_CTRL);
 	func = readl(DOVE_PMU_SIGNAL_SELECT_0 + off);
 	func &= ~(MVEBU_MPP_MASK << shift);
 	func |= (config & MVEBU_MPP_MASK) << shift;
@@ -200,21 +201,21 @@ static int dove_nand_ctrl_set(unsigned pid, unsigned long config)
 
 static int dove_audio0_ctrl_get(unsigned pid, unsigned long *config)
 {
-	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long pmu = readl(mpp_base + PMU_MPP_GENERAL_CTRL);
 
-	*config = ((pmu & DOVE_AU0_AC97_SEL) != 0);
+	*config = ((pmu & AU0_AC97_SEL) != 0);
 
 	return 0;
 }
 
 static int dove_audio0_ctrl_set(unsigned pid, unsigned long config)
 {
-	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	unsigned long pmu = readl(mpp_base + PMU_MPP_GENERAL_CTRL);
 
-	pmu &= ~DOVE_AU0_AC97_SEL;
+	pmu &= ~AU0_AC97_SEL;
 	if (config)
-		pmu |= DOVE_AU0_AC97_SEL;
-	writel(pmu, DOVE_PMU_MPP_GENERAL_CTRL);
+		pmu |= AU0_AC97_SEL;
+	writel(pmu, mpp_base + PMU_MPP_GENERAL_CTRL);
 
 	return 0;
 }
-- 
1.8.5.3




More information about the linux-arm-kernel mailing list