[PATCH 0/9] ARM: DTS: OMAP: Audio related cleanups for dtsi and dts files
Tony Lindgren
tony at atomide.com
Fri Feb 28 17:20:23 EST 2014
* Peter Ujfalusi <peter.ujfalusi at ti.com> [140124 00:21]:
> Hi Benoit,
>
> OMAP: Put the audio nodes to disabled styate by default and board dts files should
> enable the nodes which is used on the board.
>
> am335x: correct the audio mclk clock. This patch has been marked to go to 3.13
> stable as well.
Looks like these should get merged, assuming Benoit did not pick them
up yet so applying into omap-for-v3.15/dt.
Regards,
Tony
> Peter Ujfalusi (9):
> ARM: DTS: omap4-panda-common: Move audio related pinmux to respective
> nodes
> ARM: DTS: omap4-sdp: Move audio related pinmux to respective nodes
> ARM: DTS: omap4: Set all audio related IP's status to disabled as
> default
> ARM: DTS: omap4-panda-common: No need to disable the unused audio
> nodes
> ARM: DTS: omap4-sdp: No need to disable mcbsp3 node
> ARM: DTS: omap5: Set all audio related IP's status to disabled as
> default
> ARM: DTS: omap3: Set disabled status for McBSP instances as default
> state
> ARM: DTS: omap2: Set disabled status for McBSP instances as default
> state
> ARM: DTS: am335x-evmsk: Correct audio clock frequency
>
> arch/arm/boot/dts/am335x-evmsk.dts | 2 +-
> arch/arm/boot/dts/omap2420.dtsi | 2 ++
> arch/arm/boot/dts/omap2430.dtsi | 5 +++++
> arch/arm/boot/dts/omap3-beagle-xm.dts | 4 ++++
> arch/arm/boot/dts/omap3-beagle.dts | 4 ++++
> arch/arm/boot/dts/omap3-devkit8000.dts | 16 ++-------------
> arch/arm/boot/dts/omap3-igep.dtsi | 1 +
> arch/arm/boot/dts/omap3-overo.dtsi | 4 ++++
> arch/arm/boot/dts/omap3.dtsi | 5 +++++
> arch/arm/boot/dts/omap4-panda-common.dtsi | 23 ++++++++++-----------
> arch/arm/boot/dts/omap4-sdp.dts | 33 ++++++++++++++++++++++++-------
> arch/arm/boot/dts/omap4.dtsi | 6 ++++++
> arch/arm/boot/dts/omap5.dtsi | 5 +++++
> 13 files changed, 77 insertions(+), 33 deletions(-)
>
> --
> 1.8.5.3
>
More information about the linux-arm-kernel
mailing list