[PATCH v4 18/22] drivers: Enable building of Kirkwood drivers for mach-mvebu
Andrew Lunn
andrew at lunn.ch
Sat Feb 22 14:15:00 EST 2014
With the move of kirkwood into mach-mvebu, drivers Kconfig need
tweeking to allow the kirkwood specific drivers to be built.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Acked-by: Arnd Bergmann <arnd at arndb.de>
Acked-by: Mark Brown <broonie at linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon at ti.com>
Acked-by: Daniel Lezcano <daniel.lezcano at linaro.org>
Tested-by: Jason Gunthorpe <jgunthorpe at obsidianresearch.com>
Cc: Viresh Kumar <viresh.kumar at linaro.org>
Cc: Rafael J. Wysocki <rjw at rjwysocki.net>
Cc: Richard Purdie <rpurdie at rpsys.net>
Cc: Bryan Wu <cooloney at gmail.com>
Cc: Zhang Rui <rui.zhang at intel.com>
Cc: Eduardo Valentin <eduardo.valentin at ti.com>
---
v2
Simplify cpufreq/Kconfig.arm
Still needs ACKs from cpufreq, led and thermal maintainers.
---
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/cpuidle/Kconfig.arm | 2 +-
drivers/leds/Kconfig | 4 ++--
drivers/phy/Kconfig | 2 +-
drivers/thermal/Kconfig | 2 +-
sound/soc/kirkwood/Kconfig | 2 +-
6 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 31297499a60a..077db3aa985b 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -113,7 +113,7 @@ config ARM_INTEGRATOR
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
- def_bool ARCH_KIRKWOOD && OF
+ def_bool MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index d988948a89a0..97ccc31dbdd8 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -22,7 +22,7 @@ config ARM_HIGHBANK_CPUIDLE
config ARM_KIRKWOOD_CPUIDLE
bool "CPU Idle Driver for Marvell Kirkwood SoCs"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
help
This adds the CPU Idle driver for Marvell Kirkwood SoCs.
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 72156c123033..44c358ecf5a1 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -421,7 +421,7 @@ config LEDS_MC13783
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
depends on LEDS_CLASS
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
default y
help
This option enable support for the dual-GPIO LED found on the
@@ -431,7 +431,7 @@ config LEDS_NS2
config LEDS_NETXBIG
tristate "LED support for Big Network series LEDs"
depends on LEDS_CLASS
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
default y
help
This option enable support for LEDs found on the LaCie 2Big
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index afa2354f6600..5e6b33f9c294 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -24,7 +24,7 @@ config PHY_EXYNOS_MIPI_VIDEO
config PHY_MVEBU_SATA
def_bool y
- depends on ARCH_KIRKWOOD || ARCH_DOVE
+ depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_KIRKWOOD
depends on OF
select GENERIC_PHY
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 35c066489a19..1bc9cbc4f1b8 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -142,7 +142,7 @@ config RCAR_THERMAL
config KIRKWOOD_THERMAL
tristate "Temperature sensor on Marvell Kirkwood SoCs"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
depends on OF
help
Support for the Kirkwood thermal sensor driver into the Linux thermal
diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig
index 78ed4a42ad21..106e2e22fed2 100644
--- a/sound/soc/kirkwood/Kconfig
+++ b/sound/soc/kirkwood/Kconfig
@@ -1,6 +1,6 @@
config SND_KIRKWOOD_SOC
tristate "SoC Audio for the Marvell Kirkwood and Dove chips"
- depends on ARCH_KIRKWOOD || ARCH_DOVE || COMPILE_TEST
+ depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_KIRKWOOD || COMPILE_TEST
help
Say Y or M if you want to add support for codecs attached to
the Kirkwood I2S interface. You will also need to select the
--
1.8.5.3
More information about the linux-arm-kernel
mailing list