[PATCH V4 11/17] i2c: nomadik: Convert to devm functions
Ulf Hansson
ulf.hansson at linaro.org
Tue Feb 18 17:26:39 EST 2014
On 18 February 2014 23:20, Ulf Hansson <ulf.hansson at linaro.org> wrote:
> Use devm_* functions to simplify code and error handling.
>
> Cc: Alessandro Rubini <rubini at unipv.it>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: Wolfram Sang <wsa at the-dreams.de>
> Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
> ---
>
> Changes in v4:
> Rebased on top of Linus Walleij's v2 patch:
> "i2c: nomadik: factor platform data into state container"
>
> Note, only this patch needed to be rebased in the patchset.
>
> ---
> drivers/i2c/busses/i2c-nomadik.c | 36 +++++++++++++++---------------------
> 1 file changed, 15 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
> index b0b9390..cd15c03 100644
> --- a/drivers/i2c/busses/i2c-nomadik.c
> +++ b/drivers/i2c/busses/i2c-nomadik.c
> @@ -976,7 +976,12 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
> struct i2c_vendor_data *vendor = id->data;
> u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
>
> - dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
> + if (!np) {
> + dev_err(&adev->dev, "no device node\n");
> + return -ENODEV;
> + }
> +
Argh, I managed to screw up again. The above code should not be there.
The rebase of Linus v2 failed.
Hold on, v5 coming soon. :-)
Kind regards
Uffe
> + dev = devm_kzalloc(&adev->dev, sizeof(struct nmk_i2c_dev), GFP_KERNEL);
> if (!dev) {
> dev_err(&adev->dev, "cannot allocate memory\n");
> ret = -ENOMEM;
> @@ -1006,27 +1011,28 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
> /* If possible, let's go to idle until the first transfer */
> pinctrl_pm_select_idle_state(&adev->dev);
>
> - dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
> - if (!dev->virtbase) {
> + dev->virtbase = devm_ioremap(&adev->dev, adev->res.start,
> + resource_size(&adev->res));
> + if (IS_ERR(dev->virtbase)) {
> ret = -ENOMEM;
> - goto err_no_ioremap;
> + goto err_no_mem;
> }
>
> dev->irq = adev->irq[0];
> - ret = request_irq(dev->irq, i2c_irq_handler, 0,
> + ret = devm_request_irq(&adev->dev, dev->irq, i2c_irq_handler, 0,
> DRIVER_NAME, dev);
> if (ret) {
> dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq);
> - goto err_irq;
> + goto err_no_mem;
> }
>
> pm_suspend_ignore_children(&adev->dev, true);
>
> - dev->clk = clk_get(&adev->dev, NULL);
> + dev->clk = devm_clk_get(&adev->dev, NULL);
> if (IS_ERR(dev->clk)) {
> dev_err(&adev->dev, "could not get i2c clock\n");
> ret = PTR_ERR(dev->clk);
> - goto err_no_clk;
> + goto err_no_mem;
> }
>
> adap = &dev->adap;
> @@ -1048,21 +1054,13 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
> ret = i2c_add_adapter(adap);
> if (ret) {
> dev_err(&adev->dev, "failed to add adapter\n");
> - goto err_add_adap;
> + goto err_no_mem;
> }
>
> pm_runtime_put(&adev->dev);
>
> return 0;
>
> - err_add_adap:
> - clk_put(dev->clk);
> - err_no_clk:
> - free_irq(dev->irq, dev);
> - err_irq:
> - iounmap(dev->virtbase);
> - err_no_ioremap:
> - kfree(dev);
> err_no_mem:
>
> return ret;
> @@ -1079,13 +1077,9 @@ static int nmk_i2c_remove(struct amba_device *adev)
> clear_all_interrupts(dev);
> /* disable the controller */
> i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
> - free_irq(dev->irq, dev);
> - iounmap(dev->virtbase);
> if (res)
> release_mem_region(res->start, resource_size(res));
> - clk_put(dev->clk);
> pm_runtime_disable(&adev->dev);
> - kfree(dev);
>
> return 0;
> }
> --
> 1.7.9.5
>
More information about the linux-arm-kernel
mailing list