[PATCH resend] ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt

[Shawn Guo]

On Thu, Feb 06, 2014 at 11:24:13PM +0100, Sascha Silbe wrote:
> Apply the same work-around for i.MX 6D/Q erratum 006687 as used for
> Sabre Lite for the Wandboard Dual / Quad.
> 
> Like on the Sabre Lite, GPIO6 is used as a power down output for
> camera expansion boards. However, these expansion boards do not work
> with mainline yet anyway.
> 
> Tested on a Wandboard Quad. Before the patch:
> 
> root at arm:~# ping -q -f -c 10000 192.168.2.1
> PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
> 
> --- 192.168.2.1 ping statistics ---
> 10000 packets transmitted, 10000 received, 0% packet loss, time 97363ms
> rtt min/avg/max/mdev = 0.290/9.586/10.198/1.432 ms, pipe 2, ipg/ewma 9.737/9.672 ms
> 
> After the patch:
> 
> root at arm:~# ping -q -f -c 10000 192.168.2.1
> PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
> 
> --- 192.168.2.1 ping statistics ---
> 10000 packets transmitted, 10000 received, 0% packet loss, time 4810ms
> rtt min/avg/max/mdev = 0.246/0.355/0.863/0.044 ms, ipg/ewma 0.481/0.319 ms
> 
> Signed-off-by: Sascha Silbe <x-linux at infra-silbe.de>

Applied, thanks.