[PATCH 2/3] ARM: mvebu: use GPIO DT defines in Armada 370/XP boards
Gregory CLEMENT
gregory.clement at free-electrons.com
Tue Feb 11 12:44:49 EST 2014
On 11/02/2014 18:07, Thomas Petazzoni wrote:
> Instead of harcoding 0 and 1 for the gpio specifications in the Armada
> 370/XP boards, use the <dt-bindings/gpio/gpio.h> header file and its
> GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW definitions.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> ---
> arch/arm/boot/dts/armada-370-mirabox.dts | 7 ++++---
> arch/arm/boot/dts/armada-370-rd.dts | 3 ++-
> arch/arm/boot/dts/armada-xp-axpwifiap.dts | 3 ++-
> arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 9 +++++----
> 4 files changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
> index 944e878..2354fe0 100644
> --- a/arch/arm/boot/dts/armada-370-mirabox.dts
> +++ b/arch/arm/boot/dts/armada-370-mirabox.dts
> @@ -9,6 +9,7 @@
> */
>
> /dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> #include "armada-370.dtsi"
>
> / {
> @@ -73,19 +74,19 @@
>
> green_pwr_led {
> label = "mirabox:green:pwr";
> - gpios = <&gpio1 31 1>;
> + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
> default-state = "keep";
> };
>
> blue_stat_led {
> label = "mirabox:blue:stat";
> - gpios = <&gpio2 0 1>;
> + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> green_stat_led {
> label = "mirabox:green:stat";
> - gpios = <&gpio2 1 1>;
> + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
> index abbb807..c28865d 100644
> --- a/arch/arm/boot/dts/armada-370-rd.dts
> +++ b/arch/arm/boot/dts/armada-370-rd.dts
> @@ -12,6 +12,7 @@
> */
>
> /dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> #include "armada-370.dtsi"
>
> / {
> @@ -101,7 +102,7 @@
> button at 1 {
> label = "Software Button";
> linux,code = <116>;
> - gpios = <&gpio0 6 1>;
> + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
> index c5fe572..db1ef58 100644
> --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
> +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
> @@ -16,6 +16,7 @@
> */
>
> /dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> #include "armada-xp-mv78230.dtsi"
>
> / {
> @@ -158,7 +159,7 @@
> button at 1 {
> label = "Factory Reset Button";
> linux,code = <141>; /* KEY_SETUP */
> - gpios = <&gpio1 1 1>;
> + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
> index 99bcf76..944acfb 100644
> --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
> +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
> @@ -11,6 +11,7 @@
> */
>
> /dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> #include "armada-xp-mv78260.dtsi"
>
> / {
> @@ -90,19 +91,19 @@
>
> red_led {
> label = "red_led";
> - gpios = <&gpio1 17 1>;
> + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> yellow_led {
> label = "yellow_led";
> - gpios = <&gpio1 19 1>;
> + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> green_led {
> label = "green_led";
> - gpios = <&gpio1 21 1>;
> + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
> default-state = "keep";
> };
> };
> @@ -115,7 +116,7 @@
> button at 1 {
> label = "Init Button";
> linux,code = <116>;
> - gpios = <&gpio1 28 0>;
> + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> };
> };
>
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list