[PATCH 3/6] net: cpsw: Add control-module macid driver
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Thu Feb 13 14:44:31 EST 2014
On Wed, Dec 18, 2013 at 05:47:19PM +0100, Markus Pargmann wrote:
> This driver extracts the hardware macid from the control module of
> am335x processors. It exports a function cpsw_ctrl_macid_read for cpsw
> to get the macid from within the processor.
>
> This driver is not used, unless it is defined in DT and referenced by a
> cpsw slave with a phandle.
>
> Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
> ---
> .../devicetree/bindings/net/cpsw-ctrl-macid.txt | 31 +++++
> drivers/net/ethernet/ti/Kconfig | 8 ++
> drivers/net/ethernet/ti/Makefile | 1 +
> drivers/net/ethernet/ti/cpsw-ctrl-macid.c | 138 +++++++++++++++++++++
> 4 files changed, 178 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt
> create mode 100644 drivers/net/ethernet/ti/cpsw-ctrl-macid.c
>
> diff --git a/Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt b/Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt
> new file mode 100644
> index 0000000..abff2af
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt
> @@ -0,0 +1,31 @@
> +TI CPSW ctrl macid Devicetree bindings
> +--------------------------------------
> +
> +Required properties:
> + - compatible : Should be "ti,am3352-cpsw-ctrl-macid"
> + - reg : physical base address and size of the cpsw
> + registers map
> + - reg-names : names of the register map given in "reg" node
> + - #ti,cpsw-ctrl-macid : Should be <1>
#ti,mac-address-ctrl-cells?
> +
> +When used from cpsw, "ti,mac-address-ctrl" should be a phandle to this device
> +node with one argument, 0 or 1 to select the macid 0 or 1.
> +
> +Examples:
> +
> + cpsw_ctrl_macid: cpsw-ctrl-macid at 44e10630 {
> + compatible = "ti,am3352-cpsw-ctrl-macid";
> + #ti,mac-address-ctrl-cells = <1>;
> + reg = <0x44e10630 0x16>;
s/0x16/0x10/
> + reg-names = "ctrl-macid";
> + };
> +
> +Used in cpsw slave nodes like this:
> +
> + cpsw_emac0: slave at 4a100200 {
> + ti,mac-address-ctrl = <&cpsw_ctrl_macid 0>;
> + };
> +
> + cpsw_emac1: slave at 4a100300 {
> + ti,mac-address-ctrl = <&cpsw_ctrl_macid 1>;
> + };
> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index 53150c2..24819ef 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -56,12 +56,20 @@ config TI_CPSW_PHY_SEL
> This driver supports configuring of the phy mode connected to
> the CPSW.
>
> +config TI_CPSW_CTRL_MACID
> + boolean "TI CPSW internal MACID support"
> + depends on TI_CPSW
> + ---help---
> + This driver supports reading the hardcoded MACID from am33xx
> + processors control module.
> +
Would it be nicer to put this after the TI_CPSW definition. (Think
$(make config).)
> config TI_CPSW
> tristate "TI CPSW Switch Support"
> depends on ARM && (ARCH_DAVINCI || SOC_AM33XX)
> select TI_DAVINCI_CPDMA
> select TI_DAVINCI_MDIO
> select TI_CPSW_PHY_SEL
> + select TI_CPSW_CTRL_MACID
If TI_CPSW selects TI_CPSW_CTRL_MACID the latter doesn't need to depend
on the former. So this optin is user visible but never
user-(de)selectable. I'd say drop the Kconfig symbol and just add
cpsw-ctrl-macid.o to ti_cpsw-y in the Makefile (or really make it
optional).
> ---help---
> This driver supports TI's CPSW Ethernet Switch.
>
> diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
> index 9cfaab8..5a31c2b 100644
> --- a/drivers/net/ethernet/ti/Makefile
> +++ b/drivers/net/ethernet/ti/Makefile
> @@ -8,5 +8,6 @@ obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
> obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
> obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
> obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o
> +obj-$(CONFIG_TI_CPSW_CTRL_MACID) += cpsw-ctrl-macid.o
> obj-$(CONFIG_TI_CPSW) += ti_cpsw.o
> ti_cpsw-y := cpsw_ale.o cpsw.o cpts.o
> diff --git a/drivers/net/ethernet/ti/cpsw-ctrl-macid.c b/drivers/net/ethernet/ti/cpsw-ctrl-macid.c
> new file mode 100644
> index 0000000..e18c957
> --- /dev/null
> +++ b/drivers/net/ethernet/ti/cpsw-ctrl-macid.c
> @@ -0,0 +1,138 @@
> +/* CPSW Control Module MACID driver
> + *
> + * Copyright (C) 2013 Markus Pargmann <mpa at pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +#include "cpsw.h"
> +
> +#define AM33XX_CTRL_MAC_LO_REG(id) (0x8 * id)
> +#define AM33XX_CTRL_MAC_HI_REG(id) (0x8 * id + 0x4)
> +
> +struct cpsw_ctrl_macid {
> + struct device *dev;
> + u8 __iomem *ctrl_macid;
> + void (*cpsw_macid_get)(struct cpsw_ctrl_macid *priv, int slave,
> + u8 *mac_addr);
> +};
> +
> +
> +static void cpsw_ctrl_get_macid(struct cpsw_ctrl_macid *priv, int slave,
> + u8 *mac_addr)
> +{
> + u32 macid_lo;
> + u32 macid_hi;
> +
> + macid_lo = readl(priv->ctrl_macid + AM33XX_CTRL_MAC_LO_REG(slave));
> + macid_hi = readl(priv->ctrl_macid + AM33XX_CTRL_MAC_HI_REG(slave));
> +
> + mac_addr[5] = (macid_lo >> 8) & 0xff;
> + mac_addr[4] = macid_lo & 0xff;
> + mac_addr[3] = (macid_hi >> 24) & 0xff;
> + mac_addr[2] = (macid_hi >> 16) & 0xff;
> + mac_addr[1] = (macid_hi >> 8) & 0xff;
> + mac_addr[0] = macid_hi & 0xff;
> +}
> +
> +static struct platform_driver cpsw_ctrl_macid_driver;
> +
> +static int match(struct device *dev, void *data)
> +{
> + struct device_node *node = (struct device_node *)data;
> +
> + return dev->of_node == node &&
> + dev->driver == &cpsw_ctrl_macid_driver.driver;
> +}
> +
> +int cpsw_ctrl_macid_read(struct device_node *np, u8 *mac_addr)
> +{
> + struct device *ctrl_dev;
> + struct cpsw_ctrl_macid *priv;
> + struct of_phandle_args args;
> + int ret;
> +
> + ret = of_parse_phandle_with_args(np, "ti,mac-address-ctrl",
> + "#ti,mac-address-ctrl-cells", 0, &args);
> + if (ret)
> + return ret;
> +
> + if (args.args_count != 1 || args.args[0] < 0 || args.args[0] > 1) {
> + pr_err("Failed to parse ti,mac-address-module phandle because of invalid arguments\n");
> + return -EINVAL;
> + }
> +
> + ctrl_dev = bus_find_device(&platform_bus_type, NULL, args.np, match);
> + priv = dev_get_drvdata(ctrl_dev);
> + of_node_put(args.np);
> + if (priv == NULL)
> + return -EPROBE_DEFER;
> +
> + priv->cpsw_macid_get(priv, args.args[0], mac_addr);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(cpsw_ctrl_macid_read);
> +
> +static const struct of_device_id cpsw_ctrl_macid_of_ids[] = {
> + {
> + .compatible = "ti,am3352-cpsw-ctrl-macid",
> + .data = &cpsw_ctrl_get_macid,
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, cpsw_ctrl_macid_of_ids);
> +
> +static int cpsw_ctrl_macid_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + const struct of_device_id *of_id;
> + struct cpsw_ctrl_macid *priv;
> +
> + of_id = of_match_node(cpsw_ctrl_macid_of_ids, pdev->dev.of_node);
> + if (!of_id)
> + return -EINVAL;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv) {
> + dev_err(&pdev->dev, "unable to alloc memory for cpsw-ctrl-macid\n");
> + return -ENOMEM;
> + }
> +
> + priv->cpsw_macid_get = of_id->data;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl-macid");
> + priv->ctrl_macid = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->ctrl_macid))
> + return PTR_ERR(priv->ctrl_macid);
> +
> + dev_set_drvdata(&pdev->dev, priv);
> +
> + dev_info(&pdev->dev, "TI CPSW ctrl macid loaded\n");
> + return 0;
> +}
> +
> +static struct platform_driver cpsw_ctrl_macid_driver = {
> + .probe = cpsw_ctrl_macid_probe,
> + .driver = {
> + .name = "cpsw-ctrl-macid",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(cpsw_ctrl_macid_of_ids),
> + },
> +};
> +
> +module_platform_driver(cpsw_ctrl_macid_driver);
> +MODULE_AUTHOR("Markus Pargmann <mpa at pengutronix.de>");
> +MODULE_LICENSE("GPL v2");
> --
> 1.8.5.1
>
>
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list