[PATCH v3 5/5] ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig

[Arnd Bergmann]

On Tuesday 25 February 2014 19:53:17 Andrew Lunn wrote:
> On Tue, Feb 25, 2014 at 07:19:33PM +0100, Arnd Bergmann wrote:
> > On Tuesday 25 February 2014 18:34:03 Andrew Lunn wrote:
> > > The HP T5325 has a PCI based VGA controller. Add the frame buffer
> > > driver, and frame buffer support to the defconfig's. Additionally
> > > add the soc audio framework and the necessary codec.
> > > 
> > > Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> > > 
> > Does the VGA console still work with the new PCI driver?
> 
> I've not plugged in a monitor, but i do see:
> 
> xgifb 0000:01:00.0: Relocate IO address: 10000 [00010030]
> PCI: enabling device 0000:00:01.0 (0140 -> 0143)
> xgifb 0000:01:00.0: chipid = 32
> xgifb: SR14=51 DramSzie 2000000 ChannelNum 1
> xgifb 0000:01:00.0: Framebuffer at 0xe0000000, mapped to 0xe1000000, size 32768k
> xgifb 0000:01:00.0: MMIO at 0xe4000000, mapped to 0xe0a00000, size 256k
> xgifb 0000:01:00.0: No or unknown bridge type detected
> xgifb: Default mode is 800x600x16 (60Hz)
> 
> so it looks like the frame buffer is happy.
>  
> I will see if i can find a cable and a monitor.

Ok, xgifb doesn't rely on vga_base, so that probably hasn't
changed. In theory, it could have worked with vgacon or
vga16fb before but that would be broken now.

	Arnd