[PATCH 30/35] mtd: st_spi_fsm: Add the ability to write to FSM's status register

Lee Jones lee.jones at linaro.org
Tue Feb 18 09:55:57 EST 2014


Acked-by Angus Clark <angus.clark at st.com>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mtd/devices/st_spi_fsm.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 5b2993d..b32df09 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -588,6 +588,23 @@ static struct stfsm_seq stfsm_seq_erase_chip = {
 		    SEQ_CFG_STARTSEQ),
 };
 
+static struct stfsm_seq stfsm_seq_write_status = {
+	.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+	.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_WRSR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_STA_WR1,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
 static struct stfsm_seq stfsm_seq_wrvcr = {
 	.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
 		       SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
@@ -817,6 +834,25 @@ static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd,
 	return 0;
 }
 
+static int stfsm_write_status(struct stfsm *fsm, uint16_t status,
+			       int sta_bytes)
+{
+	struct stfsm_seq *seq = &stfsm_seq_write_status;
+
+	dev_dbg(fsm->dev, "writing STA[%s] 0x%04x\n",
+		(sta_bytes == 1) ? "1" : "1+2", status);
+
+	seq->status = (uint32_t)status | STA_PADS_1 | STA_CSDEASSERT;
+	seq->seq[2] = (sta_bytes == 1) ?
+		STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2;
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+};
+
 static int stfsm_wrvcr(struct stfsm *fsm, uint8_t data)
 {
 	struct stfsm_seq *seq = &stfsm_seq_wrvcr;
-- 
1.8.3.2




More information about the linux-arm-kernel mailing list