[PATCH RFC 00/31] SDHCI and SDIO IRQ improvements
Russell King - ARM Linux
linux at arm.linux.org.uk
Tue Feb 18 10:08:01 EST 2014
The following patch series is targetted at two things - fixing the SDIO
interrupt handling, and fixing problems with the sdhci driver.
- the first two patches from Thomas Gleixner provide genirq support to
allow us to fix the SDIO interrupt handling in a graceful manner.
- patch 3 adds support for avoiding the buggy sdio_irq thread - the
problem is described in that commit. Other solutions were explored,
but this is the one which was settled on after discussions between
Thomas, scheduler people and myself.
- patches 4 to 7 update sdhci to use a genirq to deal with the threaded
part of the interrupts.
- patch 8 allows card interrupts to be received from a SDIO card while
runtime suspended. Without this patch, Wifi cards attached to a
kernel with runtime PM support built in totally fail to work. This
allows them to work. Tested in 4-bit mode.
- patches 9 onwards are cleanups and fixes to the sdhci code.
drivers/mmc/core/sdio_irq.c | 41 ++-
drivers/mmc/host/sdhci-acpi.c | 8 +
drivers/mmc/host/sdhci-bcm-kona.c | 4 +
drivers/mmc/host/sdhci-bcm2835.c | 4 +
drivers/mmc/host/sdhci-cns3xxx.c | 13 +-
drivers/mmc/host/sdhci-dove.c | 4 +
drivers/mmc/host/sdhci-esdhc-imx.c | 82 ++---
drivers/mmc/host/sdhci-esdhc.h | 4 +-
drivers/mmc/host/sdhci-of-arasan.c | 4 +
drivers/mmc/host/sdhci-of-esdhc.c | 70 +++--
drivers/mmc/host/sdhci-of-hlwd.c | 4 +
drivers/mmc/host/sdhci-pci.c | 9 +-
drivers/mmc/host/sdhci-pltfm.c | 4 +
drivers/mmc/host/sdhci-pxav2.c | 14 +-
drivers/mmc/host/sdhci-pxav3.c | 13 +-
drivers/mmc/host/sdhci-s3c.c | 36 ++-
drivers/mmc/host/sdhci-sirf.c | 4 +
drivers/mmc/host/sdhci-spear.c | 5 +-
drivers/mmc/host/sdhci-tegra.c | 27 +-
drivers/mmc/host/sdhci.c | 606 ++++++++++++++++++-------------------
drivers/mmc/host/sdhci.h | 20 +-
include/linux/hardirq.h | 1 +
include/linux/interrupt.h | 1 +
include/linux/mmc/host.h | 3 +
include/linux/mmc/sdhci.h | 14 +-
kernel/irq/handle.c | 4 +-
kernel/irq/internals.h | 1 +
kernel/irq/manage.c | 94 ++++--
28 files changed, 608 insertions(+), 486 deletions(-)
--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".
More information about the linux-arm-kernel
mailing list