[PATCH 1/2] clocksource: orion: Use atomic access for shared registers
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Wed Feb 19 15:05:25 EST 2014
Replace the driver-specific thread-safe shared register API
by the recently introduced atomic_io_clear_set().
Cc: Daniel Lezcano <daniel.lezcano at linaro.org>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
Tested-by: Willy Tarreau <w at 1wt.eu>
Acked-by: Jason Cooper <jason at lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
drivers/clocksource/time-orion.c | 28 ++++++++++------------------
1 file changed, 10 insertions(+), 18 deletions(-)
diff --git a/drivers/clocksource/time-orion.c b/drivers/clocksource/time-orion.c
index 2006622..0b3ce03 100644
--- a/drivers/clocksource/time-orion.c
+++ b/drivers/clocksource/time-orion.c
@@ -35,20 +35,6 @@
#define ORION_ONESHOT_MAX 0xfffffffe
static void __iomem *timer_base;
-static DEFINE_SPINLOCK(timer_ctrl_lock);
-
-/*
- * Thread-safe access to TIMER_CTRL register
- * (shared with watchdog timer)
- */
-void orion_timer_ctrl_clrset(u32 clr, u32 set)
-{
- spin_lock(&timer_ctrl_lock);
- writel((readl(timer_base + TIMER_CTRL) & ~clr) | set,
- timer_base + TIMER_CTRL);
- spin_unlock(&timer_ctrl_lock);
-}
-EXPORT_SYMBOL(orion_timer_ctrl_clrset);
/*
* Free-running clocksource handling.
@@ -68,7 +54,8 @@ static int orion_clkevt_next_event(unsigned long delta,
{
/* setup and enable one-shot timer */
writel(delta, timer_base + TIMER1_VAL);
- orion_timer_ctrl_clrset(TIMER1_RELOAD_EN, TIMER1_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN);
return 0;
}
@@ -80,10 +67,13 @@ static void orion_clkevt_mode(enum clock_event_mode mode,
/* setup and enable periodic timer at 1/HZ intervals */
writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
- orion_timer_ctrl_clrset(0, TIMER1_RELOAD_EN | TIMER1_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN,
+ TIMER1_RELOAD_EN | TIMER1_EN);
} else {
/* disable timer */
- orion_timer_ctrl_clrset(TIMER1_RELOAD_EN | TIMER1_EN, 0);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN, 0);
}
}
@@ -131,7 +121,9 @@ static void __init orion_timer_init(struct device_node *np)
/* setup timer0 as free-running clocksource */
writel(~0, timer_base + TIMER0_VAL);
writel(~0, timer_base + TIMER0_RELOAD);
- orion_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | TIMER0_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER0_RELOAD_EN | TIMER0_EN,
+ TIMER0_RELOAD_EN | TIMER0_EN);
clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
clk_get_rate(clk), 300, 32,
clocksource_mmio_readl_down);
--
1.8.1.5
More information about the linux-arm-kernel
mailing list