[RFC PATCH v4 5/8] ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsi

Philipp Zabel p.zabel at pengutronix.de
Tue Feb 25 09:23:20 EST 2014


This patch connects IPU and and parallel display device tree
nodes using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt

The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.

Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and panels have to be added.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 arch/arm/boot/dts/imx51-apf51dev.dts | 11 ++++++++++-
 arch/arm/boot/dts/imx51-babbage.dts  | 28 ++++++++++++++++++++--------
 arch/arm/boot/dts/imx51.dtsi         | 22 +++++++++++++++++++++-
 3 files changed, 51 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 5a7f552..d3f9814 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -18,7 +18,6 @@
 
 	display at di1 {
 		compatible = "fsl,imx-parallel-display";
-		crtcs = <&ipu 0>;
 		interface-pix-fmt = "bgr666";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
@@ -41,6 +40,12 @@
 				pixelclk-active = <0>;
 			};
 		};
+
+		port {
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -122,3 +127,7 @@
 		};
 	};
 };
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 6ff15a0..6719271 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -23,7 +23,6 @@
 
 	display0: display at di0 {
 		compatible = "fsl,imx-parallel-display";
-		crtcs = <&ipu 0>;
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
@@ -41,11 +40,16 @@
 				vsync-len = <10>;
 			};
 		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
 	};
 
 	display1: display at di1 {
 		compatible = "fsl,imx-parallel-display";
-		crtcs = <&ipu 1>;
 		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
@@ -68,6 +72,12 @@
 				pixelclk-active = <0>;
 			};
 		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -81,12 +91,6 @@
 		};
 	};
 
-	imx-drm {
-		compatible = "fsl,imx-drm";
-		crtcs = <&ipu 0>, <&ipu 1>;
-		connectors = <&display0>, <&display1>;
-	};
-
 	sound {
 		compatible = "fsl,imx51-babbage-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -264,6 +268,14 @@
 	};
 };
 
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
 &ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 4bcdd3a..536644c 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -79,6 +79,11 @@
 		};
 	};
 
+	imx-drm {
+		compatible = "fsl,imx-drm";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -92,13 +97,28 @@
 		};
 
 		ipu: ipu at 40000000 {
-			#crtc-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,imx51-ipu";
 			reg = <0x40000000 0x20000000>;
 			interrupts = <11 10>;
 			clocks = <&clks 59>, <&clks 110>, <&clks 61>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
+
+			ipu_di0: port at 2 {
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint {
+				};
+			};
+
+			ipu_di1: port at 3 {
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint {
+				};
+			};
 		};
 
 		aips at 70000000 { /* AIPS1 */
-- 
1.8.5.3




More information about the linux-arm-kernel mailing list