[PATCH v3 3/6] iio: enable selection and build of pulse drivers

[Jonathan Cameron]

On 05/02/14 19:01, Matt Porter wrote:
> Add the pulse driver subdirectory when configuring and building
> IIO.
>
> Signed-off-by: Matt Porter <mporter at linaro.org>
Hi Matt,

This wants rolling into the driver patch before it.  No point it giving it
it's own patch.  This will just lead to confusion on git bisections etc.


Jonathan
> ---
>   drivers/iio/Kconfig  | 1 +
>   drivers/iio/Makefile | 1 +
>   2 files changed, 2 insertions(+)
>
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index 5dd0e12..286acc3 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -74,6 +74,7 @@ if IIO_TRIGGER
>      source "drivers/iio/trigger/Kconfig"
>   endif #IIO_TRIGGER
>   source "drivers/iio/pressure/Kconfig"
> +source "drivers/iio/pulse/Kconfig"
>   source "drivers/iio/temperature/Kconfig"
>
>   endif # IIO
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index 887d390..9a953c9 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -24,5 +24,6 @@ obj-y += light/
>   obj-y += magnetometer/
>   obj-y += orientation/
>   obj-y += pressure/
> +obj-y += pulse/
>   obj-y += temperature/
>   obj-y += trigger/
>