April 2014 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Mar 31 21:11:13 PDT 2014
Ending: Wed Apr 30 23:43:07 PDT 2014
Messages: 8412

• [PATCH v4 10/21] mtd: support BB SRAM on ICP DAS LP-8x4x   ООО "ЭлектроПлюс"
• [PATCH] ARM i.MX51: Add Efika MX Smartbook devicetree   Arnaud Patard (Rtp)
• [PATCH] ARM i.MX51: Add Efika MX Smartbook devicetree   Arnaud Patard (Rtp)
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb" (was Re: [GIT PULL] arm64 patches for 3.15)   Jon Medhurst (Tixy)
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb" (was Re: [GIT PULL] arm64 patches for 3.15)   Jon Medhurst (Tixy)
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb"   Jon Medhurst (Tixy)
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb" (was Re: [GIT PULL] arm64 patches for 3.15)   Jon Medhurst (Tixy)
• [PATCH 2/2] arm: use fixmap for text patching when text is RO   Jon Medhurst (Tixy)
• [PATCH 2/2] arm: use fixmap for text patching when text is RO   Jon Medhurst (Tixy)
• [PATCH 2/2] ARM: mm: make text and rodata read-only   Jon Medhurst (Tixy)
• [PATCH 2/2] ARM: mm: make text and rodata read-only   Jon Medhurst (Tixy)
• [PATCH 2/2] ARM: mm: make text and rodata read-only   Jon Medhurst (Tixy)
• Marvell Orion5x boards with PCIe, and DT conversion   Albert ARIBAUD
• [PATCH] arm: don't allow CONFIG_DEBUG_SET_MODULE_RONX if CONFIG_JUMP_LABEL is enabled   Laura Abbott
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Laura Abbott
• [PATCH] arm: ftrace: work with CONFIG_DEBUG_SET_MODULE_RONX   Laura Abbott
• [PATCHv5 0/2] Remove ARM meminfo   Laura Abbott
• [PATCHv5 2/2] arm: Get rid of meminfo   Laura Abbott
• [PATCH] arm64: Add missing Kconfig for CONFIG_STRICT_DEVMEM   Laura Abbott
• [PATCH] arm64: Add user_debug command line option   Laura Abbott
• [PATCH] arm64: Add user_debug command line option   Laura Abbott
• [PATCH v2 2/2] ARM: mm: allow text and rodata sections to be read-only   Laura Abbott
• kmalloc and uncached memory   Laura Abbott
• kmalloc and uncached memory   Laura Abbott
• [RFC][PATCH] arm64: Add atomic pool for dma mapping   Laura Abbott
• [PATCH 0/3] Page protections for arm64   Laura Abbott
• [PATCH 1/3] arm64: Add CONFIG_DEBUG_SET_MODULE_RONX support   Laura Abbott
• [PATCH 2/3] arm64: Treat handle_arch_irq as a function pointer   Laura Abbott
• [PATCH 3/3] arm64: WIP: add better page protections to arm64   Laura Abbott
• [RFC][PATCH] arm64: Add atomic pool for dma mapping   Laura Abbott
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Thomas Abraham
• ARM: SA1100: collie broken (and fixes pending)   Andrea Adami
• [PATCH] ARM: dts: stmpe-ts: fix wrong bindings   Stefan Agner
• [RFC 1/5] mtd:fsl_nfc: Nand flash controller for VF610, MPC5125, etc.   Stefan Agner
• [RFC 1/5] mtd:fsl_nfc: Nand flash controller for VF610, MPC5125, etc.   Stefan Agner
• [PATCH V2] mmc: dw_mmc: exynos: Turn SDIO interrupts on   Alim Akhtar
• [PATCH v3 02/16] clk: exynos5420: add clocks for ISP block   Alim Akhtar
• [PATCH v3 03/16] clk: exynos5420: update clocks for GSCL and MSCL blocks   Alim Akhtar
• [PATCH v3 04/16] clk: exynos5420: correct clock parents for mscl sysmmu   Alim Akhtar
• [PATCH v3 05/16] clk: exynos5420: update clocks for G2D block   Alim Akhtar
• [PATCH v3 01/16] clk: exynos5420: rename parent clocks   Alim Akhtar
• [PATCH v3 07/16] clk: exynos5420: update clocks for PERIC block   Alim Akhtar
• [PATCH v3 08/16] clk: exynos5420: update clocks for PERIS and GEN blocks   Alim Akhtar
• [PATCH v3 09/16] clk: exynos5420: update clocks for WCORE block   Alim Akhtar
• [PATCH v3 11/16] clk: exynos5420: correct sysmmu-mfc parent clocks   Alim Akhtar
• [PATCH v3 12/16] clk: exynos5420: fix register offset for sclk_bpll   Alim Akhtar
• [PATCH v3 15/16] clk: exynos5420: create clock ID for mout_sclk_vpll   Alim Akhtar
• [PATCH v3 16/16] clk: exynos5420: add more registers to restore list   Alim Akhtar
• [PATCH] ARM: EXYNOS: cpu hotplug: use v7_exit_coherency_flush macro for cache disabling   Leela Krishna Amudala
• [PATCH] ARM: EXYNOS: cpu hotplug: use v7_exit_coherency_flush macro for cache disabling   Leela Krishna Amudala
• [PATCH V2] ARM: EXYNOS: cpu hotplug: use v7_exit_coherency_flush macro for cache disabling   Leela Krishna Amudala
• [PATCH 0/2] Add generic cpu power control functions for exynos   Leela Krishna Amudala
• [PATCH 1/2] ARM: EXYNOS: Add generic cpu power control functions for all exynos based SoCs   Leela Krishna Amudala
• [PATCH 2/2] ARM: EXYNOS: use generic exynos cpu power control functions   Leela Krishna Amudala
• [PATCH 0/2] Add generic cpu power control functions for exynos   Leela Krishna Amudala
• [PATCH V2] ARM: EXYNOS: cpu hotplug: use v7_exit_coherency_flush macro for cache disabling   Leela Krishna Amudala
• [PATCH] Fix for the arm64 kern_addr_valid() function   Dave Anderson
• [PATCH] Fix for the arm64 kern_addr_valid() function   Dave Anderson
• [PATCH] i2c: s3c2410: resume race fix   Doug Anderson
• [PATCH 0/7] Add cros_ec changes for newer boards   Doug Anderson
• [PATCH 7/7] ARM: tegra: Add the EC i2c tunnel to tegra124-venice2   Doug Anderson
• [RESEND PATCH 0/7] Add cros_ec changes for newer boards   Doug Anderson
• [PATCH 7/7] ARM: tegra: Add the EC i2c tunnel to tegra124-venice2   Doug Anderson
• [PATCH v2 0/7] Add cros_ec changes for newer boards   Doug Anderson
• [PATCH v2 7/7] ARM: tegra: Add the EC i2c tunnel to tegra124-venice2   Doug Anderson
• [PATCH v2 0/7] Add cros_ec changes for newer boards   Doug Anderson
• [PATCH v2 0/7] Add cros_ec changes for newer boards   Doug Anderson
• [PATCH 2/2] arm: use fixmap for text patching when text is RO   Doug Anderson
• [PATCH 1/2] arm: fixmap: implement __set_fixmap()   Doug Anderson
• [PATCH v2 0/7] Add cros_ec changes for newer boards   Doug Anderson
• [PATCH v12 30/31] ARM: dts: add System MMU nodes of exynos5250   Doug Anderson
• [PATCH v2 0/7] Add cros_ec changes for newer boards   Doug Anderson
• [PATCH v3 0/7] Add cros_ec changes for newer boards   Doug Anderson
• [PATCH v3 7/7] ARM: tegra: Add the EC i2c tunnel to tegra124-venice2   Doug Anderson
• [PATCH 0/3] pinctrl: qcom: Add IPQ8064 pinctrl support   Bjorn Andersson
• ARM: Tidy up DTB Makefile entries   Domenico Andreoli
• Forcing DEBUG_UART_{PHYS, VIRT} changes when switching between v7 platforms?   Domenico Andreoli
• [PATCH 0/3] Minor OMAP DTS fixes   Suman Anna
• [PATCH 1/3] ARM: dts: OMAP5: Add mailbox dt node to fix boot warning   Suman Anna
• [PATCH 2/3] ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox   Suman Anna
• [PATCH 3/3] ARM: dts: AM3517: Disable absent IPs inherited from OMAP3   Suman Anna
• [PATCH v3 3/4] ARM: OMAP2+: Add machine entry for dra72x devices   Suman Anna
• [PATCH 0/3] Minor OMAP DTS fixes   Suman Anna
• [PATCHv5 00/15] hwspinlock/omap dt support   Suman Anna
• [PATCHv5 01/15] Documentation: dt: add common bindings for hwspinlock   Suman Anna
• [PATCHv5 02/15] Documentation: dt: add the omap hwspinlock bindings document   Suman Anna
• [PATCHv5 03/15] hwspinlock/core: maintain a list of registered hwspinlock banks   Suman Anna
• [PATCHv5 04/15] hwspinlock/core: add common OF helpers   Suman Anna
• [PATCHv5 05/15] hwspinlock/omap: add support for dt nodes   Suman Anna
• [PATCHv5 06/15] hwspinlock/omap: enable module before reading SYSSTATUS register   Suman Anna
• [PATCHv5 07/15] hwspinlock/omap: enable build for AM33xx, AM43xx & DRA7xx   Suman Anna
• [PATCHv5 RFC 08/15] hwspinlock/core: add support for base id in DT   Suman Anna
• [PATCHv5 RFC 09/15] hwspinlock/core: prepare unregister code to support reserved locks   Suman Anna
• [PATCHv5 RFC 10/15] hwspinlock/core: prepare core to support reserved locks   Suman Anna
• [PATCHv5 RFC 11/15] hwspinlock/core: add support for reserved locks   Suman Anna
• [PATCHv5 RFC 12/15] hwspinlock/core: add OF helper to parse reserved locks   Suman Anna
• [PATCHv5 RFC 13/15] hwspinlock/omap: use OF helper to get reserved locks   Suman Anna
• [PATCHv5 RFC 14/15] hwspinlock/core: return ERR_PTRs on failure in _request_ api   Suman Anna
• [PATCHv5 RFC 15/15] hwspinlock/core: change return codes of_hwspin_lock_request_specific   Suman Anna
• [PATCH v2 00/10] arm64: UEFI support   H. Peter Anvin
• [PATCH v2 00/10] arm64: UEFI support   H. Peter Anvin
• [PATCH v2 00/10] arm64: UEFI support   H. Peter Anvin
• [PATCH v7 1/2] can: xilinx CAN controller support   Kedareswara rao Appana
• [PATCH v7 2/2] can: Add xilinx CAN device tree bindings documentation   Kedareswara rao Appana
• [PATCH] ARM: KVM: Handle IPA unmapping on memory region deletion   Eric Auger
• [PATCH] ARM: KVM: Handle IPA unmapping on memory region deletion   Eric Auger
• [alsa-devel] [PATCH 01/15] ASoC: CS42L51 and WM8962 codecs depend on INPUT   Brian Austin
• [alsa-devel] [PATCH 01/15] ASoC: CS42L51 and WM8962 codecs depend on INPUT   Austin, Brian
• [alsa-devel] [PATCH 01/15] ASoC: CS42L51 and WM8962 codecs depend on INPUT   Austin, Brian
• [PATCH 00/15] ARM: sunxi: add A31 PL pins support   Boris BREZILLON
• [PATCH 01/15] ARM: sunxi: dt: list all pinctrl compatible strings   Boris BREZILLON
• [PATCH 02/15] ARM: sunxi: dt: document pinctrl clock related properties   Boris BREZILLON
• [PATCH 03/15] ARM: sunxi: dt: add pinctrl clock-names properties   Boris BREZILLON
• [PATCH 04/15] pinctrl: sunxi: specify clk name when retrieving pinctrl pio clk   Boris BREZILLON
• [PATCH 05/15] clk: sunxi: add A31 APB0 clk gate defintions   Boris BREZILLON
• [PATCH 06/15] clk: sunxi: add A31 APB0 gates compatible string to the documentation   Boris BREZILLON
• [PATCH 07/15] ARM: sunxi: dt: define A31's APB0 clk gates node   Boris BREZILLON
• [PATCH 08/15] reset: sunxi: document sunxi's reset controllers bindings   Boris BREZILLON
• [PATCH 09/15] clk: sunxi: add A31 APB0 reset line defintions   Boris BREZILLON
• [PATCH 10/15] pinctrl: sunxi: add PL pin definitions   Boris BREZILLON
• [PATCH 11/15] pinctrl: sunxi: add support for A31 PL pins   Boris BREZILLON
• [PATCH 12/15] pinctrl: sunxi: retrieve and enable PL clk gate for A31 SoC   Boris BREZILLON
• [PATCH 13/15] pinctrl: sunxi: retrieve and enable PL reset line for A31 SoC   Boris BREZILLON
• [PATCH 14/15] pinctrl: sunxi: define A31 PL0/PL1 pins   Boris BREZILLON
• [PATCH 15/15] ARM: sunxi: dt: add support for A31's PL pins   Boris BREZILLON
• [PATCH 07/15] ARM: sunxi: dt: define A31's APB0 clk gates node   Boris BREZILLON
• [PATCH 06/15] clk: sunxi: add A31 APB0 gates compatible string to the documentation   Boris BREZILLON
• [PATCH 00/15] ARM: sunxi: add A31 PL pins support   Boris BREZILLON
• [PATCH 00/15] ARM: sunxi: add A31 PL pins support   Boris BREZILLON
• [PATCH v2 0/5] ARM: sunxi: add multi pin controller support   Boris BREZILLON
• [PATCH v2 1/5] pinctrl: sunxi: add PL and PM pin definitions   Boris BREZILLON
• [PATCH v2 2/5] pinctrl: sunxi: support multiple pin controller   Boris BREZILLON
• [PATCH v2 3/5] pinctrl: sunxi: define A31 R_PIO pin functions   Boris BREZILLON
• [PATCH v2 4/5] pinctrl: sunxi: add reset control support   Boris BREZILLON
• [PATCH v2 5/5] ARM: sunxi: update the default ARCH_NR_GPIO for sunxi arch   Boris BREZILLON
• [PATCH v3 0/7] ARM: sunxi: add multi pin controller support   Boris BREZILLON
• [PATCH v3 1/7] pinctrl: sunxi: check clk_prepare_enable return value   Boris BREZILLON
• [PATCH v3 2/7] pinctrl: sunxi: disable clk when failing to probe pin controller   Boris BREZILLON
• [PATCH v3 3/7] pinctrl: sunxi: add PL and PM pin definitions   Boris BREZILLON
• [PATCH v3 4/7] pinctrl: sunxi: support multiple pin controller   Boris BREZILLON
• [PATCH v3 5/7] pinctrl: sunxi: define A31 R_PIO pin functions   Boris BREZILLON
• [PATCH v3 6/7] pinctrl: sunxi: add reset control support   Boris BREZILLON
• [PATCH v3 7/7] ARM: sunxi: update the default ARCH_NR_GPIO for sunxi arch   Boris BREZILLON
• [PATCH 04/15] pinctrl: sunxi: specify clk name when retrieving pinctrl pio clk   Boris BREZILLON
• [RFC PATCH] regmap: smbus: add support for regmap over SMBus   Boris BREZILLON
• [RFC PATCH] regmap: smbus: add support for regmap over SMBus   Boris BREZILLON
• [PATCH 0/4] ARM: at91: move sam9n12 SoC and boards to the CCF   Boris BREZILLON
• [PATCH 1/4] ARM: at91: prepare common clk transition for sam9n12 SoC   Boris BREZILLON
• [PATCH 2/4] ARM: at91/dt: define sam9n12 clocks   Boris BREZILLON
• [PATCH 3/4] ARM: at91/dt: define sam9n12ek crystal frequencies   Boris BREZILLON
• [PATCH 4/4] ARM: at91: move sam9n12 SoC to the CCF   Boris BREZILLON
• [PATCH 0/4] ARM: at91: move sam9x5 SoCs and boards to the CCF   Boris BREZILLON
• [PATCH 1/4] ARM: at91: prepare common clk transition for sam9x5 SoCs   Boris BREZILLON
• [PATCH 2/4] ARM: at91/dt: define sam9x5 clocks   Boris BREZILLON
• [PATCH 3/4] ARM: at91/dt: define sam9x5ek's crystal frequencies   Boris BREZILLON
• [PATCH 4/4] ARM: at91: move sam9x5 SoCs to the CCF   Boris BREZILLON
• [PATCH 2/4] ARM: at91/dt: define sam9n12 clocks   Boris BREZILLON
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Boris BREZILLON
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Boris BREZILLON
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Boris BREZILLON
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Boris BREZILLON
• [PATCH] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Boris BREZILLON
• [PATCH] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Boris BREZILLON
• [PATCH v2 0/2] regmap: support regmap over SMBus   Boris BREZILLON
• [PATCH v2 1/2] regmap: add reg_read/reg_write callbacks to regmap_bus struct   Boris BREZILLON
• [PATCH v2 2/2] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Boris BREZILLON
• [PATCH 2/4] ARM: at91/dt: define sam9x5 clocks   Boris BREZILLON
• [PATCH v2 02/11] clk: at91: update main clk documentation   Boris BREZILLON
• [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller   Boris BREZILLON
• [RFC 0/3] DRM driver for the ATMEL High end LCD controller   Boris BREZILLON
• [PATCH v3] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Boris BREZILLON
• [PATCH 0/8] ARM: at91: sama5d3: enable sound support   Boris BREZILLON
• [PATCH v4] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Boris BREZILLON
• [PATCH v3 00/11] ARM: at91: rework main and slow clk implementation   Boris BREZILLON
• [PATCH v3 01/11] clk: at91: rework main clk implementation   Boris BREZILLON
• [PATCH v3 02/11] clk: at91: update main clk documentation   Boris BREZILLON
• [PATCH v3 03/11] clk: at91: add slow clks driver   Boris BREZILLON
• [PATCH v3 04/11] clk: at91: add slow clk documentation   Boris BREZILLON
• [PATCH v3 05/11] ARM: at91/dt: move sama5d3 SoC to the new main/slow clk model   Boris BREZILLON
• [PATCH v3 06/11] ARM: at91/dt: add xtal frequencies to sama5d3xcm boards   Boris BREZILLON
• [PATCH v3 07/11] ARM: at91/dt: add xtal frequencies to sama5d3 xplained board   Boris BREZILLON
• [PATCH v3 08/11] ARM: at91/dt: move at91sam9261 SoC to the new main clock model   Boris BREZILLON
• [PATCH v3 09/11] ARM: at91/dt: define main xtal frequency of the at91sam9261ek board   Boris BREZILLON
• [PATCH v3 10/11] ARM: at91/dt: move at91sam9rl SoC to the new slow/main clock models   Boris BREZILLON
• [PATCH v3 11/11] ARM: at91/dt: define sam9rlek crystal frequencies   Boris BREZILLON
• [PATCH v3 5/7] pinctrl: sunxi: define A31 R_PIO pin functions   Boris BREZILLON
• [PATCH] ARM: sunxi: dt: list all pinctrl compatible strings   Boris BREZILLON
• [PATCH 3/3] ARM: at91/dt: sam9rl: Fix PLL output range and mck divisors   Boris BREZILLON
• [PATCH] ARM: sunxi: dt: list all pinctrl compatible strings   Boris BREZILLON
• [PATCH 0/2] i2c: sunxi: add P2WI controller support   Boris BREZILLON
• [PATCH 1/2] i2c: sunxi: add P2WI DT bindings documentation   Boris BREZILLON
• [PATCH 2/2] i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support   Boris BREZILLON
• [RFC 0/3] DRM driver for the ATMEL High end LCD controller   Boris BREZILLON
• [PATCH 2/2] i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support   Boris BREZILLON
• [PATCH 2/2] i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support   Boris BREZILLON
• [PATCH 0/7] mfd: add basic sun6i A31 PRCM support   Boris BREZILLON
• [PATCH 1/7] reset: sunxi: document sunxi's reset controllers bindings   Boris BREZILLON
• [PATCH 2/7] reset: sunxi: allow MFD subdevices probe   Boris BREZILLON
• [PATCH 3/7] mfd: add support for sun6i PRCM (Power/Reset/Clock Management) unit   Boris BREZILLON
• [PATCH 4/7] mfd: sun6i-prcm: document DT bindings   Boris BREZILLON
• [PATCH 5/7] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support   Boris BREZILLON
• [PATCH 6/7] clk: sunxi: document PRCM clock compatible strings   Boris BREZILLON
• [PATCH 7/7] ARM: sunxi: dt: add PRCM clk and reset controller subdevices   Boris BREZILLON
• [PATCH 5/7] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support   Boris BREZILLON
• [PATCH 5/7] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support   Boris BREZILLON
• [PATCH 7/7] ARM: sunxi: dt: add PRCM clk and reset controller subdevices   Boris BREZILLON
• [PATCH 5/7] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support   Boris BREZILLON
• [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller   Boris BREZILLON
• [RFC PATCH 0/3] mtd: nand: add randomizer support   Boris BREZILLON
• [RFC PATCH 1/3] mtd: nand: introduce a randomizer layer in the NAND framework   Boris BREZILLON
• [RFC PATCH 2/3] of: mtd: add NAND randomizer mode retrieval   Boris BREZILLON
• [RFC PATCH 3/3] mtd: nand: add sunxi randomizer support   Boris BREZILLON
• [PATCH 0/3] ARM: kirkwood: Add device tree for NSA320   Adam Baker
• [PATCH 1/3] ARM: kirkwood: Move NSA310 common parts to include file   Adam Baker
• [PATCH 2/3] ARM: kirkwood: Add DTS file for NSA320   Adam Baker
• [PATCH 3/3] ARM: kirkwood: rename kirwood-nsa310-common to 3x0-common   Adam Baker
• [PATCH 3/3] ARM: kirkwood: rename kirwood-nsa310-common to 3x0-common   Adam Baker
• [PATCH v2 3/3] ARM: kirkwood: rename kirwood-nsa310-common to 3x0-common   Adam Baker
• [PATCH] ARM: OMAP2+: Fix config name for USB3 PHY   Felipe Balbi
• [PATCH] irq: crossbar: improve allocate_free_irq() complexity   Felipe Balbi
• [PATCH] irq: crossbar: improve allocate_free_irq() complexity   Felipe Balbi
• OMAP baseline test results for v3.14   Felipe Balbi
• [PATCH] irq: crossbar: improve allocate_free_irq() complexity   Felipe Balbi
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Felipe Balbi
• [PATCH] power: twl4030_charger: clear IRQs after handling them   Felipe Balbi
• [PATCH v2] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY   Felipe Balbi
• [PATCH 2/2] ARM: dts: omap5: Add dr_mode for dwc3   Felipe Balbi
• [PATCH 2/2] ARM: dts: omap5: Add dr_mode for dwc3   Felipe Balbi
• [PATCH V2 05/19] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Felipe Balbi
• [PATCH V2 06/19] bus: omap_l3_noc: un-obfuscate l3_targ address computation   Felipe Balbi
• [PATCH V2 05/19] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Felipe Balbi
• [PATCH 1/8] usb: host: xhci-plat: Allow to register glue code using the device tree   Felipe Balbi
• [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code   Felipe Balbi
• [PATCH 3/8] xhci-platform: Add a new controller using xhci: Armada 38x   Felipe Balbi
• [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support   Felipe Balbi
• [PATCH V2 05/19] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Felipe Balbi
• [PATCH V2 06/19] bus: omap_l3_noc: un-obfuscate l3_targ address computation   Felipe Balbi
• [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Felipe Balbi
• [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code   Felipe Balbi
• [PATCH v2 4/6] soc: ti: add Keystone Navigator QMSS driver   Felipe Balbi
• [PATCH v2 4/6] soc: ti: add Keystone Navigator QMSS driver   Felipe Balbi
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Felipe Balbi
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Felipe Balbi
• [PATCH v2 01/18] usb: host: xhci-plat: Sort the headers in alphabetic order   Felipe Balbi
• [PATCH v2 02/18] usb: host: xhci-plat: Add clocks support   Felipe Balbi
• [PATCH v2 03/18] usb: host: xhci-plat: Add support for the Armada 38x   Felipe Balbi
• [PATCH v2 14/18] ARM: mvebu: Add support for USB cluster on the Armada 375 SoC   Felipe Balbi
• [PATCH v2 03/18] usb: host: xhci-plat: Add support for the Armada 38x   Felipe Balbi
• [PATCH] power: twl4030_charger: clear IRQs after handling them   Felipe Balbi
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Felipe Balbi
• [PATCH 1/6] drivers: net: cpts: Remove hardcoded clock name for CPTS   Felipe Balbi
• [PATCH 3/5] arm: omap2: skip device build from platform code for dt.   Felipe Balbi
• [PATCH v18 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Felipe Balbi
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Felipe Balbi
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Felipe Balbi
• [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators   Chris Ball
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Chris Ball
• [PATCH v2 3/7] clk: exynos5420: Rename clock IDs   Shaik Ameer Basha
• [PATCH v2 3/7] clk: exynos5420: Rename clock IDs   Shaik Ameer Basha
• [PATCH v2 1/7] clk: exynos5420: Add more clock register offsets   Shaik Ameer Basha
• [PATCH v2 2/7] clk: exynos5420: Add more clock IDs   Shaik Ameer Basha
• [PATCH v2 3/7] clk: exynos5420: Rename clock IDs   Shaik Ameer Basha
• [PATCH v11 12/27] ARM: dts: Add description of System MMU of Exynos SoCs   Shaik Ameer Basha
• [PATCH v11 20/27] iommu/exynos: allow having multiple System MMUs for a master H/W   Shaik Ameer Basha
• [PATCH v3 00/16] exynos5420: clock file cleanup   Shaik Ameer Basha
• [PATCH v3 01/16] clk: exynos5420: rename parent clocks   Shaik Ameer Basha
• [PATCH v3 02/16] clk: exynos5420: add clocks for ISP block   Shaik Ameer Basha
• [PATCH v3 03/16] clk: exynos5420: update clocks for GSCL and MSCL blocks   Shaik Ameer Basha
• [PATCH v3 04/16] clk: exynos5420: correct clock parents for mscl sysmmu   Shaik Ameer Basha
• [PATCH v3 05/16] clk: exynos5420: update clocks for G2D block   Shaik Ameer Basha
• [PATCH v3 06/16] clk: exynos5420: update clocks for DISP1 block   Shaik Ameer Basha
• [PATCH v3 07/16] clk: exynos5420: update clocks for PERIC block   Shaik Ameer Basha
• [PATCH v3 08/16] clk: exynos5420: update clocks for PERIS and GEN blocks   Shaik Ameer Basha
• [PATCH v3 09/16] clk: exynos5420: update clocks for WCORE block   Shaik Ameer Basha
• [PATCH v3 10/16] clk: exynos5420: update clocks for FSYS and FSYS2 blocks   Shaik Ameer Basha
• [PATCH v3 11/16] clk: exynos5420: correct sysmmu-mfc parent clocks   Shaik Ameer Basha
• [PATCH v3 12/16] clk: exynos5420: fix register offset for sclk_bpll   Shaik Ameer Basha
• [PATCH v3 13/16] clk: exynos5420: cleanup core and misc clocks   Shaik Ameer Basha
• [PATCH v3 14/16] clk: exynos5420: correct g3d parent clock   Shaik Ameer Basha
• [PATCH v3 15/16] clk: exynos5420: create clock ID for mout_sclk_vpll   Shaik Ameer Basha
• [PATCH v3 16/16] clk: exynos5420: add more registers to restore list   Shaik Ameer Basha
• [PATCH v3 00/16] exynos5420: clock file cleanup   Shaik Ameer Basha
• [PATCH v12 00/31] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Shaik Ameer Basha
• [PATCH v12 01/31] iommu/exynos: do not include removed header   Shaik Ameer Basha
• [PATCH v12 02/31] iommu/exynos: add missing cache flush for removed page table entries   Shaik Ameer Basha
• [PATCH v12 03/31] iommu/exynos: change error handling when page table update is failed   Shaik Ameer Basha
• [PATCH v12 04/31] iommu/exynos: fix L2TLB invalidation   Shaik Ameer Basha
• [PATCH v12 05/31] iommu/exynos: remove prefetch buffer setting   Shaik Ameer Basha
• [PATCH v12 06/31] iommu/exynos: allocate lv2 page table from own slab   Shaik Ameer Basha
• [PATCH v12 07/31] iommu/exynos: always enable runtime PM   Shaik Ameer Basha
• [PATCH v12 08/31] iommu/exynos: handle one instance of sysmmu with a device descriptor   Shaik Ameer Basha
• [PATCH v12 09/31] iommu/exynos: remove dbgname from drvdata of a System MMU   Shaik Ameer Basha
• [PATCH v12 10/31] iommu/exynos: use managed device helper functions   Shaik Ameer Basha
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Shaik Ameer Basha
• [PATCH v12 12/31] iommu/exynos: support for device tree   Shaik Ameer Basha
• [PATCH v12 13/31] iommu/exynos: gating clocks of master H/W   Shaik Ameer Basha
• [PATCH v12 14/31] iommu/exynos: remove custom fault handler   Shaik Ameer Basha
• [PATCH v12 15/31] iommu/exynos: handle 'mmu-masters' property of DT and improve handling sysmmu   Shaik Ameer Basha
• [PATCH v12 16/31] iommu/exynos: turn on useful configuration options   Shaik Ameer Basha
• [PATCH v12 17/31] iommu/exynos: add support for power management subsystems.   Shaik Ameer Basha
• [PATCH v12 18/31] iommu/exynos: allow having multiple System MMUs for a master H/W   Shaik Ameer Basha
• [PATCH v12 19/31] iommu/exynos: change rwlock to spinlock   Shaik Ameer Basha
• [PATCH v12 20/31] iommu/exynos: add devices attached to the System MMU to an IOMMU group   Shaik Ameer Basha
• [PATCH v12 21/31] iommu/exynos: fix address handling   Shaik Ameer Basha
• [PATCH v12 22/31] iommu/exynos: use exynos-iommu specific typedef   Shaik Ameer Basha
• [PATCH v12 23/31] iommu/exynos: use simpler function to get MMU version   Shaik Ameer Basha
• [PATCH v12 24/31] iommu/exynos: apply workaround of caching fault page table entries   Shaik Ameer Basha
• [PATCH v12 25/31] iommu/exynos: enhanced error messages   Shaik Ameer Basha
• [PATCH v12 26/31] clk: exynos: add gate clock descriptions of System MMU   Shaik Ameer Basha
• [PATCH v12 27/31] ARM: dts: add System MMU nodes of exynos4 series   Shaik Ameer Basha
• [PATCH v12 28/31] ARM: dts: add System MMU nodes of exynos4210   Shaik Ameer Basha
• [PATCH v12 29/31] ARM: dts: add System MMU nodes of exynos4x12   Shaik Ameer Basha
• [PATCH v12 30/31] ARM: dts: add System MMU nodes of exynos5250   Shaik Ameer Basha
• [PATCH v12 31/31] ARM: dts: add System MMU nodes of exynos5420   Shaik Ameer Basha
• [PATCH v3 02/16] clk: exynos5420: add clocks for ISP block   Shaik Ameer Basha
• [PATCH v12 00/31] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Shaik Ameer Basha
• [PATCH v12 00/31] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Shaik Ameer Basha
• [PATCH 0/3] context tracker support for arm64   Larry Bassel
• [PATCH 1/3] arm64: adjust el0_sync so that a function can be called   Larry Bassel
• [PATCH 2/3] arm64: add support for context tracking   Larry Bassel
• [PATCH 3/3] arm64: enable context tracking   Larry Bassel
• FEC ethernet issues [Was: PL310 errata workarounds]   Jaccon Bastiaansen
• [PATCH] serial: amba-pl011: fix regression, causing an Oops on rmmod   Tushar Behera
• [PATCHv2 5/8] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Tushar Behera
• [PATCH] ARM: dts: disable MDMA1 node for smdk5420 board   Tushar Behera
• [PATCH] ARM: dts: disable MDMA1 node for smdk5420 board   Tushar Behera
• [PATCHv4 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Tushar Behera
• [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250   Tushar Behera
• [PATCH] i2c: exynos5: Initialise Samsung High Speed I2C controller early   Tushar Behera
• [PATCHv4 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Tushar Behera
• [PATCH v5 1/9] dt: exynos5420: Enable support for USB 3.0 PHY controller   Tushar Behera
• [PATCH v5 3/9] dt: exynos5250: Enable support for generic USB DRD phy   Tushar Behera
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Tushar Behera
• [PATCH 5/7] ARM: dts: enable hdmi for exynos5250 based snow board   Tushar Behera
• [PATCH v12 18/31] iommu/exynos: allow having multiple System MMUs for a master H/W   Tushar Behera
• [PATCH-RESEND] ARM: dts: Add arm-pmu node for exynos4412   Tushar Behera
• [PATCHv2] ARM: dts: exynos4: clean up arm-pmu node   Tushar Behera
• [PATCH-RESEND] ARM: dts: Add arm-pmu node for exynos4412   Tushar Behera
• [PATCH 04/15] ASoC: samsung-idma: avoid 64-bit division   Tushar Behera
• [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Dirk Behme
• [PATCH 2/3] ARM i.MX6: Fix ethernet PLL clocks   Dirk Behme
• [PATCH 2/3] ARM i.MX6: Fix ethernet PLL clocks   Dirk Behme
• [PATCH 9/10] ARM: dts: tx28: restructure and update DTS file   Dirk Behme
• [PATCH 1/2] ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel   Dirk Behme
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Dirk Behme
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Dirk Behme
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Dirk Behme
• [PATCH 134/222] ARM: imx: keep PLLs in bypass while they're locking   Dirk Behme
• [PATCH] ARM: dts: twl4030: Add twl4030-madc node   Marek Belisko
• [PATCH 0/2] Add display support for gta04 device   Marek Belisko
• [PATCH 1/2] omapdss: panel-tpo-td028ec1: Add DT support.   Marek Belisko
• [PATCH 2/2] ARM: dts: oma3-gta04: Add display support   Marek Belisko
• [PATCH v2 0/3] Add display support for gta04 device   Marek Belisko
• [PATCH v2 1/3] omapdss: panel-tpo-td028ec1: Add DT support.   Marek Belisko
• [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support   Marek Belisko
• [PATCH v2 3/3] omapdss: panel-tpo-td028ec1: Add module alias   Marek Belisko
• [PATCH] ARM: at91: fix spi cs on sama5d3 Xplained board   Alexandre Belloni
• [PATCH 2/3] ARM: dts: document the berlin enable-method property   Alexandre Belloni
• MX28: leds/pwm: Using pwm driven led as heartbeat leads to kernel warning   Alexandre Belloni
• MX28: leds/pwm: Using pwm driven led as heartbeat leads to kernel warning   Alexandre Belloni
• MX28: leds/pwm: Using pwm driven led as heartbeat leads to kernel warning   Alexandre Belloni
• MX28: leds/pwm: Using pwm driven led as heartbeat leads to kernel warning   Alexandre Belloni
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Alexandre Belloni
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Alexandre Belloni
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Alexandre Belloni
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Alexandre Belloni
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Alexandre Belloni
• [PATCH 0/2] improve pwm lookup support without device tree   Alexandre Belloni
• [PATCH 1/2] pwm: add period and polarity to struct pwm_lookup   Alexandre Belloni
• [PATCH 2/2] pwm: use PWM_LOOKUP to set the period and polarity   Alexandre Belloni
• [PATCH] pwm: atmel: set pwm_chip can_sleep flag   Alexandre Belloni
• [PATCH 1/2] pwm: add period and polarity to struct pwm_lookup   Alexandre Belloni
• [PATCH 2/2] pwm: use PWM_LOOKUP to set the period and polarity   Alexandre Belloni
• [PATCHv2 0/7] Add Allwinner SoCs PWM support   Alexandre Belloni
• [PATCHv2 1/7] pwm: Add Allwinner SoC support   Alexandre Belloni
• [PATCHv2 2/7] pwm: sunxi: document OF bindings   Alexandre Belloni
• [PATCHv2 3/7] ARM: sun4i: dt: add pinmux configuration for the PWM   Alexandre Belloni
• [PATCHv2 4/7] ARM: sun4i: dt: add PWM support   Alexandre Belloni
• [PATCHv2 5/7] ARM: sun7i: dt: add pinmux configuration for the PWM   Alexandre Belloni
• [PATCHv2 6/7] ARM: sun7i: dt: add PWM support   Alexandre Belloni
• [PATCHv2 7/7] ARM: sunxi: dt: add PWM support for the cubietruck   Alexandre Belloni
• [PATCH] gpio/at91: free GPIO after configuring as input   Alexandre Belloni
• [PATCH] pinctrl/at91: Fix mask creation in at91_gpio_dbg_show   Alexandre Belloni
• [PATCH 2/4] ARM: at91/dt: define sam9n12 clocks   Alexandre Belloni
• [PATCH 1/4] ARM: at91: prepare common clk transition for sam9n12 SoC   Alexandre Belloni
• [PATCH 3/4] ARM: at91/dt: define sam9n12ek crystal frequencies   Alexandre Belloni
• [PATCH 4/4] ARM: at91: move sam9n12 SoC to the CCF   Alexandre Belloni
• [PATCH 1/4] ARM: at91: prepare common clk transition for sam9x5 SoCs   Alexandre Belloni
• [PATCH 2/4] ARM: at91/dt: define sam9x5 clocks   Alexandre Belloni
• [PATCH 3/4] ARM: at91/dt: define sam9x5ek's crystal frequencies   Alexandre Belloni
• [PATCH 4/4] ARM: at91: move sam9x5 SoCs to the CCF   Alexandre Belloni
• [PATCHv2 00/11] improve PWM lookup support without device tree   Alexandre Belloni
• [PATCHv2 01/11] pwm: add period and polarity to struct pwm_lookup   Alexandre Belloni
• [PATCHv2 02/11] ARM: shmobile: Armadillo 800 EVA: initialize all struct pwm_lookup members   Alexandre Belloni
• [PATCHv2 03/11] pwm: renesas-tpu: remove useless struct tpu_pwm_platform_data   Alexandre Belloni
• [PATCHv2 04/11] ARM: OMAP3: Beagle: initialize all the struct pwm_lookup members   Alexandre Belloni
• [PATCHv2 05/11] ARM: pxa: hx4700: initialize all the struct pwm_lookup members   Alexandre Belloni
• [PATCHv2 06/11] pwm: modify PWM_LOOKUP to initialize all struct pwm_lookup members   Alexandre Belloni
• [PATCHv2 07/11] ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup   Alexandre Belloni
• [PATCHv2 08/11] ARM: shmobile: Armadillo 800 EVA: use PWM_LOOKUP to initialize struct pwm_lookup   Alexandre Belloni
• [PATCHv2 09/11] ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup   Alexandre Belloni
• [PATCHv2 10/11] leds: leds-pwm: retrieve configured pwm period   Alexandre Belloni
• [PATCHv2 11/11] backlight: pwm_bl: retrieve configured pwm period   Alexandre Belloni
• Device tree support for Atmel AC97 controller on AT91SAM9263   Alexandre Belloni
• [PATCH 1/4] ALSA: sound/atmel/ac97c.c: Convert to module_platform_driver   Alexandre Belloni
• [PATCH 2/4] ALSA: sound/atmel-ac97c.h: Remove unused flags from platform data   Alexandre Belloni
• [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support   Alexandre Belloni
• [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support   Alexandre Belloni
• [PATCHv3 00/15] iio: adc: at91 cleanups and atmel_tsadcc removal   Alexandre Belloni
• [PATCHv3 01/15] ARM: at91: sam9g45: remove unused platform_data   Alexandre Belloni
• [PATCHv3 02/15] ARM: at91: sam9260: remove unused platform_data   Alexandre Belloni
• [PATCHv3 03/15] iio: adc: at91: cleanup platform_data   Alexandre Belloni
• [PATCHv3 04/15] iio: adc: at91_adc: Add support for touchscreens without TSMR   Alexandre Belloni
• [PATCHv3 05/15] ARM: at91: sam9m10g45ek: Add touchscreen support through at91_adc   Alexandre Belloni
• [PATCHv3 06/15] iio: adc: at91: remove unused include from include/mach   Alexandre Belloni
• [PATCHv3 07/15] iio: adc: at91: add sam9rl support   Alexandre Belloni
• [PATCHv3 08/15] ARM: at91: sam9rl: add at91_adc to support adc and touchscreen   Alexandre Belloni
• [PATCHv3 09/15] ARM: at91: sam9rlek add touchscreen support through at91_adc   Alexandre Belloni
• [PATCHv3 10/15] ARM: at91: sam9g45: switch from atmel_tsadcc to at91_adc   Alexandre Belloni
• [PATCHv3 11/15] ARM: at91: sam9rl: switch from atmel_tsadcc to at91_adc   Alexandre Belloni
• [PATCHv3 12/15] ARM: at91: remove atmel_tsadcc from sama5_defconfig   Alexandre Belloni
• [PATCHv3 13/15] Input: atmel_tsadcc: remove driver   Alexandre Belloni
• [PATCHv3 14/15] ARM: at91: remove atmel_tsadcc platform_data   Alexandre Belloni
• [PATCHv3 15/15] ARM: at91/dt: at91-cosino_mega2560 remove useless tsadcc node   Alexandre Belloni
• [PATCH 0/2] Add more peripherals to the sam9rlek   Alexandre Belloni
• [PATCH 1/2] ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support   Alexandre Belloni
• [PATCH 2/2] ARM: at91/dt: add peripherals to the at91sam9rlek board   Alexandre Belloni
• [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q   Alexandre Belloni
• [PATCH 2/4] ARM: at91/dt: define sam9x5 clocks   Alexandre Belloni
• [PATCH] ARM: dts: at91-sama5d3_xplained: add the regulator device node   Alexandre Belloni
• [PATCH] ARM: dts: at91-sama5d3_xplained: add the regulator device node   Alexandre Belloni
• [PATCH RESEND] tty/serial: atmel_serial: Fix device tree documentation   Alexandre Belloni
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Alexandre Belloni
• [PATCH 1/3] ARM: at91/dt: sam9261: Fix PLL output ranges and other clocks divisors   Alexandre Belloni
• [PATCH 2/3] ARM: at91/dt: sam9261: Add ssc2, SSC clocks and pcks   Alexandre Belloni
• [PATCH 3/3] ARM: at91/dt: sam9rl: Fix PLL output range and mck divisors   Alexandre Belloni
• [PATCH 0/5] Berlin: add clock support   Alexandre Belloni
• [PATCH 1/5] clk: berlin: add support for clocks   Alexandre Belloni
• [PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation   Alexandre Belloni
• [PATCH 3/5] ARM: berlin/dt: add sdio clocks to BG2   Alexandre Belloni
• [PATCH 4/5] ARM: berlin/dt: add sdio clocks to BG2CD   Alexandre Belloni
• [PATCH 5/5] ARM: berlin/dt: add sdio clocks to BG2Q   Alexandre Belloni
• [PATCHv2 0/5] Berlin: add clock support   Alexandre Belloni
• [PATCHv2 1/5] clk: berlin: add support for clocks   Alexandre Belloni
• [PATCHv2 2/5] clk: berlin: add berlin clocks DT bindings documentation   Alexandre Belloni
• [PATCHv2 3/5] ARM: berlin/dt: add sdio clocks to BG2   Alexandre Belloni
• [PATCHv2 4/5] ARM: berlin/dt: add sdio clocks to BG2CD   Alexandre Belloni
• [PATCHv2 5/5] ARM: berlin/dt: add sdio clocks to BG2Q   Alexandre Belloni
• [RFC 0/5] berlin: add support for clocks sharing registers   Alexandre Belloni
• [RFC 1/5] clk: berlin: add support for clock groups   Alexandre Belloni
• [RFC 2/5] clk: berlin: add berlin clock groups DT bindings documentation   Alexandre Belloni
• [RFC 3/5] ARM: berlin/dt: add support for the clock group to BG2   Alexandre Belloni
• [RFC 4/5] ARM: berlin/dt: add support for the clock group to BG2D   Alexandre Belloni
• [RFC 5/5] ARM: berlin/dt: add support for the clock group to BG2Q   Alexandre Belloni
• [PATCHv3 0/7] Add Allwinner SoCs PWM support   Alexandre Belloni
• [PATCHv3 1/7] pwm: Add Allwinner SoC support   Alexandre Belloni
• [PATCHv3 2/7] pwm: sunxi: document OF bindings   Alexandre Belloni
• [PATCHv3 3/7] ARM: sun4i: dt: add pinmux configuration for the PWM   Alexandre Belloni
• [PATCHv3 4/7] ARM: sun4i: dt: add PWM support   Alexandre Belloni
• [PATCHv3 5/7] ARM: sun7i: dt: add pinmux configuration for the PWM   Alexandre Belloni
• [PATCHv3 6/7] ARM: sun7i: dt: add PWM support   Alexandre Belloni
• [PATCHv3 7/7] ARM: sunxi: dt: add PWM support for the cubietruck   Alexandre Belloni
• [PATCHv4 0/2] Add Allwinner SoCs PWM support   Alexandre Belloni
• [PATCHv4 1/2] pwm: Add Allwinner SoC support   Alexandre Belloni
• [PATCHv4 2/2] pwm: sunxi: document OF bindings   Alexandre Belloni
• [GIT PULL] remoteproc cleanups for 3.15   Ohad Ben-Cohen
• [PATCH 0/5] Add platform support for LSI AXM55xx   Anders Berg
• [PATCH 1/5] ARM: Add platform support for LSI AXM55xx SoC   Anders Berg
• [PATCH 2/5] ARM: dts: Device tree for AXM55xx.   Anders Berg
• [PATCH 3/5] ARM: axxia: Adding defconfig for AXM55xx   Anders Berg
• [PATCH 4/5] power: reset: Add Axxia system reset driver   Anders Berg
• [PATCH 5/5] ARM: dts: axxia: Add reset controller   Anders Berg
• [PATCH 2/5] ARM: dts: Device tree for AXM55xx.   Anders Berg
• [PATCH 2/5] ARM: dts: Device tree for AXM55xx.   Anders Berg
• [PATCH 1/5] ARM: Add platform support for LSI AXM55xx SoC   Anders Berg
• [PATCH v2 0/6] Add platform support for LSI AXM55xx   Anders Berg
• [PATCH v2 1/6] ARM: Add platform support for LSI AXM55xx SoC   Anders Berg
• [PATCH v2 2/6] clk: Add clock driver for AXM55xx SoC   Anders Berg
• [PATCH v2 3/6] ARM: dts: Device tree for AXM55xx.   Anders Berg
• [PATCH v2 4/6] ARM: axxia: Adding defconfig for AXM55xx   Anders Berg
• [PATCH v2 5/6] power: reset: Add Axxia system reset driver   Anders Berg
• [PATCH v2 6/6] ARM: dts: axxia: Add reset controller   Anders Berg
• [PATCH v2 3/6] ARM: dts: Device tree for AXM55xx.   Anders Berg
• [PATCH v2 3/6] ARM: dts: Device tree for AXM55xx.   Anders Berg
• [PATCH v2 3/6] ARM: dts: Device tree for AXM55xx.   Anders Berg
• [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Johannes Berg
• [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Johannes Berg
• [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Johannes Berg
• [PATCH 0/7] net: rfkill: gpio: Add device tree support   Johannes Berg
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Arnd Bergmann
• mach header files   Arnd Bergmann
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Arnd Bergmann
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Arnd Bergmann
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Arnd Bergmann
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Arnd Bergmann
• [PATCH] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)   Arnd Bergmann
• mach header files   Arnd Bergmann
• mach header files   Arnd Bergmann
• mach header files   Arnd Bergmann
• [PATCH v1 6/8] ARM: hisi: add hip04 SoC support   Arnd Bergmann
• mach header files   Arnd Bergmann
• mach header files   Arnd Bergmann
• mach header files   Arnd Bergmann
• [GIT PULL 1/8] ARM: SoC non-critical bug fixes for 3.15   Arnd Bergmann
• [GIT PULL 2/8] ARM: SoC: cleanups for 3.15   Arnd Bergmann
• [GIT PULL 3/8] ARM: SoC specific changes   Arnd Bergmann
• [GIT PULL 4/8] ARM: SoC: board changes   Arnd Bergmann
• [GIT PULL 5/8] ARM: SoC: device tree changes   Arnd Bergmann
• [GIT PULL 6/8] ARM: SoC: driver changes   Arnd Bergmann
• [GIT PULL 7/8] ARM: SoC: sh driver changes   Arnd Bergmann
• [GIT PULL 8/8] ARM: SoC: late cleanups   Arnd Bergmann
• [PATCH v1 6/8] ARM: hisi: add hip04 SoC support   Arnd Bergmann
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Arnd Bergmann
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Arnd Bergmann
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Arnd Bergmann
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Arnd Bergmann
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Arnd Bergmann
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Arnd Bergmann
• [PATCH v2 02/12] ARM: append ARCH_MULTI_V7_LPAE   Arnd Bergmann
• [PATCH v2 03/12] ARM: hisi: add ARCH_HISI   Arnd Bergmann
• [PATCH v2 07/12] ARM: hisi: add hip04 SoC support   Arnd Bergmann
• [PATCH v2 03/12] ARM: hisi: add ARCH_HISI   Arnd Bergmann
• [PATCH v2 09/12] ARM: config: append hip04_defconfig   Arnd Bergmann
• Big endian working?   Arnd Bergmann
• Big endian working?   Arnd Bergmann
• [RFC 0/3] future of gemini platform   Arnd Bergmann
• Big endian working?   Arnd Bergmann
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Arnd Bergmann
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Arnd Bergmann
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Arnd Bergmann
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Arnd Bergmann
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Arnd Bergmann
• [PATCH 06/27] ARM: EXYNOS:: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Arnd Bergmann
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Arnd Bergmann
• [PATCH 02/27] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250   Arnd Bergmann
• [PATCH 03/27] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Arnd Bergmann
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Arnd Bergmann
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Arnd Bergmann
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Arnd Bergmann
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Arnd Bergmann
• [PATCH 03/27] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Arnd Bergmann
• [PATCH 1/4] clocksource: Add support for the Mediatek SoCs   Arnd Bergmann
• [PATCH v4 1/9] mfd: AXP20x: Add mfd driver for AXP20x PMIC   Arnd Bergmann
• [PATCH v4 1/9] mfd: AXP20x: Add mfd driver for AXP20x PMIC   Arnd Bergmann
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Arnd Bergmann
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Arnd Bergmann
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Arnd Bergmann
• [PATCH v2 03/12] ARM: hisi: add ARCH_HISI   Arnd Bergmann
• [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Arnd Bergmann
• [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM   Arnd Bergmann
• [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM   Arnd Bergmann
• [PATCH 1/2] ARM: add cpu_is_pj4() to distinguish PJ4 core   Arnd Bergmann
• [PATCH v2 2/5] Power: reset: add bindings for keystone reset driver   Arnd Bergmann
• [PATCH 0/3] ARM: PCI: implement virtual PCI host controller   Arnd Bergmann
• [PATCH v2 07/12] ARM: hisi: add hip04 SoC support   Arnd Bergmann
• [PATCH] arm64:kconfig: make default for CONFIG_COMPAT   Arnd Bergmann
• [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Arnd Bergmann
• dma_alloc_coherent and cache?   Arnd Bergmann
• [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Arnd Bergmann
• dma_alloc_coherent and cache?   Arnd Bergmann
• [PATCH 1/5] ARM: Add platform support for LSI AXM55xx SoC   Arnd Bergmann
• [PATCH 2/5] ARM: dts: Device tree for AXM55xx.   Arnd Bergmann
• [PATCH 2/5] ARM: dts: Device tree for AXM55xx.   Arnd Bergmann
• [PATCH 0/3] ARM: PCI: implement virtual PCI host controller   Arnd Bergmann
• [PATCH] ARM: prima2: remove L2 cache size override   Arnd Bergmann
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Arnd Bergmann
• [PATCH Resend] ARM: EXYNOS: Map SYSRAM address through DT   Arnd Bergmann
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Arnd Bergmann
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Arnd Bergmann
• [PATCH v4 13/21] misc: support for LP-8x4x custom parallel bus   Arnd Bergmann
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Arnd Bergmann
• [PATCH 4/8] tty/serial: add generic serial earlycon   Arnd Bergmann
• [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [PATCH v8 2/3] net: hisilicon: new hip04 MDIO driver   Arnd Bergmann
• [PATCH RESEND 1/5] ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC   Arnd Bergmann
• [PATCH RESEND 3/5] ARM: BCM63XX: add BCM63138 minimal Device Tree   Arnd Bergmann
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Arnd Bergmann
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Arnd Bergmann
• [PATCH v3 7/7] ARM: sunxi: update the default ARCH_NR_GPIO for sunxi arch   Arnd Bergmann
• [PATCH v8 2/3] net: hisilicon: new hip04 MDIO driver   Arnd Bergmann
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Arnd Bergmann
• [Qemu-devel] Change of TEXT_OFFSET for multi_v7_defconfig   Arnd Bergmann
• [Qemu-devel] Change of TEXT_OFFSET for multi_v7_defconfig   Arnd Bergmann
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Arnd Bergmann
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Arnd Bergmann
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Arnd Bergmann
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Arnd Bergmann
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Arnd Bergmann
• [PATCH v2 3/4] ARM: OMAP2+: Add machine entry for dra72x devices   Arnd Bergmann
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Arnd Bergmann
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Arnd Bergmann
• [PATCH 1/3] asm-generic: Add renameat2 syscall   Arnd Bergmann
• [RFC 3/3] asm-generic: Drop renameat syscall from default list   Arnd Bergmann
• [PATCH v6 2/8] ARM: sunxi: Split out the various machines into separate files   Arnd Bergmann
• [PATCH v5 7/7] ARM: sun6i: dt: Add A31 DMA controller to DTSI   Arnd Bergmann
• [PATCH v6 3/8] ARM: sunxi: Move the clock protection to machine hooks   Arnd Bergmann
• [PATCH v6 6/8] ARM: sun6i: Sort the NMI node by physical address   Arnd Bergmann
• [PATCH v6 3/8] ARM: sunxi: Move the clock protection to machine hooks   Arnd Bergmann
• [PATCH v6 2/8] ARM: sunxi: Split out the various machines into separate files   Arnd Bergmann
• [PATCH v8] mmc: moxart: Add MOXA ART SD/MMC driver   Arnd Bergmann
• [PATCH 1/5] wdt: sunxi: Move restart code to the watchdog driver   Arnd Bergmann
• [PATCH 2/5] power: reset: Add Allwinner A31 reset code   Arnd Bergmann
• [PATCH 3/5] ARM: sunxi: Select restart drivers   Arnd Bergmann
• [PATCH 4/5] ARM: sunxi: Remove reset code from the platform   Arnd Bergmann
• [PATCH 5/5] ARM: sunxi: Remove sun4i and sun7i machine definitions   Arnd Bergmann
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Arnd Bergmann
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Arnd Bergmann
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Arnd Bergmann
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Arnd Bergmann
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Arnd Bergmann
• [PATCH v8 2/3] net: hisilicon: new hip04 MDIO driver   Arnd Bergmann
• [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices   Arnd Bergmann
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Arnd Bergmann
• [GIT PULL v3] Xilinx Zynq changes for v3.15   Arnd Bergmann
• [GIT PULL v3] Xilinx Zynq changes for v3.15   Arnd Bergmann
• ARM: SoC fixes for 3.15-rc3   Arnd Bergmann
• [PATCH v2 03/18] usb: host: xhci-plat: Add support for the Armada 38x   Arnd Bergmann
• [PATCH] pci-rcar-gen2: add device tree support   Arnd Bergmann
• [GIT PULL] at91: fixes for 3.15 #1   Arnd Bergmann
• [PATCH v12 15/31] iommu/exynos: handle 'mmu-masters' property of DT and improve handling sysmmu   Arnd Bergmann
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Arnd Bergmann
• [PATCH v12 00/31] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Arnd Bergmann
• [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices   Arnd Bergmann
• [PATCH] gpio: always enable GPIO_OMAP on ARCH_OMAP   Arnd Bergmann
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Arnd Bergmann
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Arnd Bergmann
• [PATCH v3 part1 08/11] ARM64 / ACPI: Introduce PCI functions for ACPI on ARM64   Arnd Bergmann
• [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Arnd Bergmann
• [PATCH 1/2] ARM: sunxi: Split the various SoCs support in Kconfig   Arnd Bergmann
• [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Arnd Bergmann
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Arnd Bergmann
• [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Arnd Bergmann
• [Linaro-acpi] [PATCH v3 part1 08/11] ARM64 / ACPI: Introduce PCI functions for ACPI on ARM64   Arnd Bergmann
• [PATCH] gpio: always enable GPIO_OMAP on ARCH_OMAP   Arnd Bergmann
• [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Arnd Bergmann
• [PATCH v3 part1 03/11] ARM64 : Add dummy asm/cpu.h   Arnd Bergmann
• [PATCH v4 4/5] ARM: OMAP2+: Add machine entry for dra72x devices   Arnd Bergmann
• [PATCH v4 2/5] ARM: dts: Add support for DRA72x family of devices   Arnd Bergmann
• [PATCH v4 5/5] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients   Arnd Bergmann
• ARM: mm: Could I change module space size or place modules in vmalloc area?   Arnd Bergmann
• [PATCH] gpio: always enable GPIO_OMAP on ARCH_OMAP   Arnd Bergmann
• [alsa-devel] [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Arnd Bergmann
• [alsa-devel] [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Arnd Bergmann
• [alsa-devel] [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Arnd Bergmann
• [PATCH] Xen: hibernation is x86-only at the moment   Arnd Bergmann
• [RFC 08/11] ARM: dts: am33xx: Add prcm_resets node   Arnd Bergmann
• [RFC 01/11] drivers: reset: TI: SoC reset controller support.   Arnd Bergmann
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Arnd Bergmann
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Arnd Bergmann
• [PATCH] ASoC: cq93vc: fix cq93vc_get_regmap build error   Arnd Bergmann
• [PATCH Resend] ARM: EXYNOS: Map SYSRAM address through DT   Arnd Bergmann
• [PATCH v3] pcie: Add Xilinx PCIe Host Bridge IP driver   Arnd Bergmann
• [PATCH] arm64: mm: Create gigabyte kernel logical mappings where possible   Arnd Bergmann
• [PATCH 03/15] ARM: dts: kirkwood: add stdout-path property to all boards   Arnd Bergmann
• [PATCH v5 0/3] ARM: sunxi: Add support for consumer infrared devices   Alexander Bersenev
• [PATCH v5 1/3] ARM: sunxi: Add documentation for sunxi consumer infrared devices   Alexander Bersenev
• [PATCH v5 2/3] ARM: sunxi: Add driver for sunxi IR controller   Alexander Bersenev
• [PATCH v5 3/3] ARM: sunxi: Add IR controller support in DT on A20   Alexander Bersenev
• [PATCH v3 0/7] arm64: NEON crypto under CONFIG_PREEMPT   Ard Biesheuvel
• [PATCH v3 1/7] arm64/crypto: SHA-1 using ARMv8 Crypto Extensions   Ard Biesheuvel
• [PATCH v3 2/7] arm64/crypto: SHA-224/SHA-256 using ARMv8 Crypto Extensions   Ard Biesheuvel
• [PATCH v3 3/7] arm64/crypto: GHASH secure hash using ARMv8 Crypto Extensions   Ard Biesheuvel
• [PATCH v3 4/7] arm64/crypto: add shared macro to test for NEED_RESCHED   Ard Biesheuvel
• [PATCH v3 5/7] arm64/crypto: add voluntary preemption to Crypto Extensions SHA1   Ard Biesheuvel
• [PATCH v3 6/7] arm64/crypto: add voluntary preemption to Crypto Extensions SHA2   Ard Biesheuvel
• [PATCH v3 7/7] arm64/crypto: add voluntary preemption to Crypto Extensions GHASH   Ard Biesheuvel
• [patch] clk: vt8500: several forever loops   Ard Biesheuvel
• [PATCH] asm-generic: allow generic unaligned access if the arch supports it   Ard Biesheuvel
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Ard Biesheuvel
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Ard Biesheuvel
• QCOM Mainlining BOF at ELC   Tim Bird
• memcpy alignment for DEVICE_nGnRnE   Michael Bohan
• memcpy alignment for DEVICE_nGnRnE   Michael Bohan
• [PATCH] mach-bcm: clean up config and build targets   Paul Bolle
• [PATCH] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)   Paul Bolle
• [PATCH] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)   Paul Bolle
• [PATCH] ARM: msm: Remove MSM_SCM   Paul Bolle
• [PATCH] ARM: SAMSUNG: remove two unused S3C boot options   Paul Bolle
• [PATCH] ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE   Paul Bolle
• Kconfig ARM_ERRATA_753970?   Paul Bolle
• [PATCH v6 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Paul Bolle
• [PATCH v6 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Paul Bolle
• [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE   Paul Bolle
• [PATCH] hwrng: remove unbuildable picoxcell TRNG   Paul Bolle
• [PATCH v2 01/12] ARM: imx/mxs defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Paul Bolle
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Paolo Bonzini
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Paolo Bonzini
• [GIT PULL] KVM/ARM Fixes for 3.15-rc4   Paolo Bonzini
• mach header files   Kent Borg
• mach header files   Kent Borg
• [RFC PATCH 0/3] Make kexec work with CONFIG_DEBUG_RODATA enabled   Nikolay Borisov
• [RFC PATCH 1/3] ARM: kexec: Make kexec work with read-only kernel .text section   Nikolay Borisov
• [RFC PATCH 2/3] ARM: Kconfig: remove dependence of CONFIG_DEBUG_RODATA on !kexec   Nikolay Borisov
• [RFC PATCH 3/3] ARM: kexec: Use .struct to describe relocate_new_kernel parameter layout   Nikolay Borisov
• [PATCH 0/3] Make kexec work with CONFIG_DEBUG_RODATA enabled   Nikolay Borisov
• [PATCH 1/3] ARM: kexec: Make kexec work with read-only kernel .text section   Nikolay Borisov
• [PATCH 2/3] ARM: Kconfig: remove dependence of CONFIG_DEBUG_RODATA on !kexec   Nikolay Borisov
• [PATCH 3/3] ARM: kexec: Use .struct to describe relocate_new_kernel parameter layout   Nikolay Borisov
• [PATCH] ARM: unwinder: Fix thread_saved_fp aka "enable backtrace on THUMB2"   Nikolay Borisov
• [PATCH] ARM: unwind: Fix handling of "Pop r4-r[4+nnn],r14" opcode   Nikolay Borisov
• [PATCH 0/3] Make kexec work with CONFIG_DEBUG_RODATA enabled   Nikolay Borisov
• [PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure   James Bottomley
• [PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure   James Bottomley
• [PATCH 2/5] ARM: add SMP support for Broadcom mobile SoCs   Stephen Boyd
• [PATCH] clk: qcom: Add support for IPQ8064's global clock controller (GCC)   Stephen Boyd
• [PATCH] clk: qcom: Add basic support for APQ8064 global clock controller clocks   Stephen Boyd
• [PATCH] ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees   Stephen Boyd
• [PATCH] clk: qcom: Various fixes for MSM8960's global clock controller   Stephen Boyd
• [PATCH 0/4] Support qcom GDSC hardware   Stephen Boyd
• [PATCH 1/4] clk: qcom: Add support for GDSCs   Stephen Boyd
• [PATCH 2/4] clk: qcom: Add GDSCs within 8974 multimedia clock controller   Stephen Boyd
• [PATCH 3/4] ARM: dts: qcom: Add GDSC nodes underneath clock controller   Stephen Boyd
• [PATCH 4/4] devicetree: bindings: qcom,mmcc: Document GDSC binding   Stephen Boyd
• [PATCH v6 0/5] Krait L1/L2 EDAC driver   Stephen Boyd
• [PATCH v6 1/5] genirq: export percpu irq functions for module usage   Stephen Boyd
• [PATCH v6 2/5] ARM: Add Krait L2 register accessor functions   Stephen Boyd
• [PATCH v6 3/5] devicetree: bindings: Document Krait cache error interrupts   Stephen Boyd
• [PATCH v6 4/5] edac: Add support for Krait CPU cache error detection   Stephen Boyd
• [PATCH v6 5/5] ARM: dts: msm: Fix Krait CPU/L2 nodes   Stephen Boyd
• [PATCH v6 2/5] ARM: Add Krait L2 register accessor functions   Stephen Boyd
• [PATCH] ARM: msm: Remove MSM_SCM   Stephen Boyd
• [PATCH v2] clk: qcom: Add support for IPQ8064's global clock controller (GCC)   Stephen Boyd
• [PATCH v6 4/5] edac: Add support for Krait CPU cache error detection   Stephen Boyd
• [PATCH v6 3/5] devicetree: bindings: Document Krait cache error interrupts   Stephen Boyd
• [PATCH v2] ARM: qcom: Add initial APQ8064 SoC and IFC6410 board device trees   Stephen Boyd
• [PATCH v2] ARM: qcom: Add initial APQ8064 SoC and IFC6410 board device trees   Stephen Boyd
• [PATCH] mfd: pm8921: Remove pm8xxx API now that sub-devices use regmap   Stephen Boyd
• [PATCH 1/2] ARM: dts: msm: Add 8921 PMIC to ssbi bus   Stephen Boyd
• [PATCH 2/2] ARM: dts: msm: Add 8058 PMIC to ssbi bus   Stephen Boyd
• [PATCH 1/4] clocksource: Add support for the Mediatek SoCs   Stephen Boyd
• [PATCH] ARM: perf: save/restore pmu registers in pm notifier   Stephen Boyd
• [PATCH] ARM: debug: qcom: make UART address selection configuration option   Stephen Boyd
• Change of TEXT_OFFSET for multi_v7_defconfig   Stephen Boyd
• [PATCH 0/3] CCF fixlets   Stephen Boyd
• [PATCH] clk: qcom: Consolidate common probe code   Stephen Boyd
• [PATCH 0/4] Support qcom GDSC hardware   Stephen Boyd
• [PATCH 0/2] Clock unregistration fixes   Stephen Boyd
• [PATCH 1/2] clk: Fix double free due to devm_clk_register()   Stephen Boyd
• [PATCH 2/2] clk: Fix slab corruption in clk_unregister()   Stephen Boyd
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Stephen Boyd
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Stephen Boyd
• [RFC/PATCH 0/4] Use wound/wait mutexes in the common clock framework   Stephen Boyd
• [RFC/PATCH 1/4] clk: Recalc rate and accuracy in underscore functions if not caching   Stephen Boyd
• [RFC/PATCH 2/4] clk: Make __clk_lookup() use a list instead of tree search   Stephen Boyd
• [RFC/PATCH 3/4] clk: Use lockless functions for debug printing   Stephen Boyd
• [RFC/PATCH 4/4] clk: Use ww_mutexes for clk_prepare_{lock/unlock}   Stephen Boyd
• [PATCH v2] clk: qcom: Add support for IPQ8064's global clock controller (GCC)   Stephen Boyd
• [PATCH] mfd: pm8921: Remove pm8xxx API now that sub-devices use regmap   Stephen Boyd
• [PATCH] clk: qcom: Various fixes for MSM8960's global clock controller   Stephen Boyd
• [PATCH 4/4] devicetree: bindings: qcom,mmcc: Document GDSC binding   Stephen Boyd
• [PATCH] arm64: Fix duplicated Kconfig entries again   Josh Boyer
• [PATCH] ARM: mach-bcm: add ARM_ERRATA_775420   Scott Branden
• [PATCH] ARM: mach-bcm: add ARM_ERRATA_775420   Scott Branden
• [PATCH V2] ARM: mach-bcm: add ARM_ERRATA_775420   Scott Branden
• [PATCH 0/4] Tegra SD/MMC fixes   Andrew Bresticker
• [PATCH 1/4] mmc: tegra: disable UHS modes   Andrew Bresticker
• [PATCH 2/4] mmc: tegra: fix reporting of base clock frequency   Andrew Bresticker
• [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures   Andrew Bresticker
• [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators   Andrew Bresticker
• [PATCH 2/4] mmc: tegra: fix reporting of base clock frequency   Andrew Bresticker
• [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures   Andrew Bresticker
• [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures   Andrew Bresticker
• [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures   Andrew Bresticker
• [PATCH] ARM: tegra: define Jetson TK1 regulators   Andrew Bresticker
• [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators   Andrew Bresticker
• [PATCH] ARM: tegra: make Venice's +3.3V_RUN regulator always on   Andrew Bresticker
• [PATCH 4/4] ARM: tegra: fix Venice2 VQMMC regulators   Andrew Bresticker
• [PATCH v2 0/3] Tegra SD/MMC fixes   Andrew Bresticker
• [PATCH v2 1/3] mmc: tegra: disable UHS modes   Andrew Bresticker
• [PATCH v2 2/3] mmc: tegra: fix reporting of base clock frequency   Andrew Bresticker
• [PATCH v2 3/3] ARM: tegra: fix Venice2 SD card VQMMC supply   Andrew Bresticker
• [PATCH 0/7] Add cros_ec changes for newer boards   Andrew Bresticker
• [PATCH v4 1/3] i2c: cadence: Document device tree bindings   Soren Brinkmann
• [PATCH v4 2/3] i2c: Add driver for Cadence I2C controller   Soren Brinkmann
• [PATCH v4 3/3] ARM: zynq: dt: Add I2C nodes to Zynq device tree   Soren Brinkmann
• [PATCH v5 1/3] i2c: cadence: Document device tree bindings   Soren Brinkmann
• [PATCH v5 2/3] i2c: Add driver for Cadence I2C controller   Soren Brinkmann
• [PATCH v5 3/3] ARM: zynq: dt: Add I2C nodes to Zynq device tree   Soren Brinkmann
• [PATCH 1/2] ARM: zynq: dt: Convert to preprocessor includes   Soren Brinkmann
• [PATCH 2/2] ARM: zynq: dt: Use #defines for interrupt specifiers   Soren Brinkmann
• [PATCH v2 0/5] ARM: zynq: DT update   Soren Brinkmann
• [PATCH v2 1/5] ARM: zynq: DT: Add 'clock-latency' property   Soren Brinkmann
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Soren Brinkmann
• [PATCH v2 3/5] ARM: zynq: dt: Use #defines for interrupt specifiers   Soren Brinkmann
• [PATCH v2 4/5] dt-bindings: clock: Add Zynq-7000 header   Soren Brinkmann
• [PATCH v2 5/5] ARM: zynq: dt: Use #defines for clock specifiers   Soren Brinkmann
• [RESEND PATCH v3 1/9] tty: xuartps: Fix kernel-doc errors in the driver   Soren Brinkmann
• [RESEND PATCH v3 2/9] tty: xuartps: Initialize ports according to aliases   Soren Brinkmann
• [RESEND PATCH v3 3/9] tty: xuartps: Clean up   Soren Brinkmann
• [RESEND PATCH v3 4/9] tty: xuartps: Print warning in clock notifier   Soren Brinkmann
• [RESEND PATCH v3 5/9] tty: xuartps: Refactor read-modify-writes   Soren Brinkmann
• [RESEND PATCH v3 6/9] tty: xuartps: Don't write IRQ disable register to enable interrupts   Soren Brinkmann
• [RESEND PATCH v3 7/9] tty: xuartps: Rebrand driver as Cadence UART   Soren Brinkmann
• [RESEND PATCH v3 8/9] tty: cadence: Document DT binding   Soren Brinkmann
• [RESEND PATCH v3 9/9] ARM: zynq: DT: Migrate UART to Cadence binding   Soren Brinkmann
• [PATCH] clk: zynq: Leave debug clocks in bootup state   Soren Brinkmann
• [PATCH v3 1/2] i2c: Add driver for Cadence I2C controller   Sören Brinkmann
• [ARM ATTEND] Following discussions, DT bindings   Sören Brinkmann
• [ARM ATTEND RESEND] Following discussions, DT bindings   Sören Brinkmann
• [PATCH v3 1/2] i2c: Add driver for Cadence I2C controller   Sören Brinkmann
• [PATCH v4 1/3] i2c: cadence: Document device tree bindings   Sören Brinkmann
• [PATCH v4 2/3] i2c: Add driver for Cadence I2C controller   Sören Brinkmann
• [PATCH 74/75] ARM: l2c: always enable low power modes   Sören Brinkmann
• [PATCH 74/75] ARM: l2c: always enable low power modes   Sören Brinkmann
• [PATCH v4 1/3] i2c: cadence: Document device tree bindings   Sören Brinkmann
• [PATCH 1/2] ARM: zynq: dt: Convert to preprocessor includes   Sören Brinkmann
• [PATCH] i2c: cadence: fix Kconfig dependency   Sören Brinkmann
• [PATCH] i2c: cadence: fix Kconfig dependency   Sören Brinkmann
• [PATCH] i2c: cadence: fix Kconfig dependency   Sören Brinkmann
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Sören Brinkmann
• [PATCH] i2c: cadence: fix Kconfig dependency   Sören Brinkmann
• [PATCH] i2c: cadence: fix Kconfig dependency   Sören Brinkmann
• [PATCH 1/2] GPIO: Add driver for Zynq GPIO controller   Sören Brinkmann
• [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node   Sören Brinkmann
• [PATCH v2 1/5] ARM: zynq: DT: Add 'clock-latency' property   Sören Brinkmann
• [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node   Sören Brinkmann
• ARM: Zynq: CPUFreq issues in setting frequencies (Was: Re: Help about PetaLinux)   Sören Brinkmann
• [RESEND PATCH v3 1/9] tty: xuartps: Fix kernel-doc errors in the driver   Sören Brinkmann
• [PATCH RFC] ARM: dts: am335x: update USB DT references   Leigh Brown
• [rtc-linux] [PATCH v3 2/3] rtc: Add APM X-Gene SoC RTC driver   Mark Brown
• [PATCH v2 11/16] ASoC: fsl-ssi: Fix register values when disabling   Mark Brown
• [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup   Mark Brown
• [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup   Mark Brown
• Porting plat-pxa to the MMP PDMA driver   Mark Brown
• Porting plat-pxa to the MMP PDMA driver   Mark Brown
• [rtc-linux] [PATCH v3 2/3] rtc: Add APM X-Gene SoC RTC driver   Mark Brown
• [PATCH v4 2/3] rtc: Add APM X-Gene SoC RTC driver   Mark Brown
• [PATCH] ARM: topology: Make it clear that all CPUs need to be described   Mark Brown
• [PATCH v4 2/3] rtc: Add APM X-Gene SoC RTC driver   Mark Brown
• [PATCH v4 1/9] mfd: AXP20x: Add mfd driver for AXP20x PMIC   Mark Brown
• [PATCH v4 6/9] regulator: AXP20x: Add support for regulators subsystem   Mark Brown
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Mark Brown
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Mark Brown
• [linux-sunxi] Re: [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Mark Brown
• [rtc-linux] [PATCH] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver   Mark Brown
• [PATCH v4 1/2] ASoC: sam9g20_wm8731: remove useless mach/gpio.h   Mark Brown
• [PATCH 3/4] regulator: bcm590xx: add support for regulators on secondary i2c slave   Mark Brown
• [PATCH 1/5] spi: sirf: correct TXFIFO empty interrupt status bit   Mark Brown
• [PATCH 2/5] spi: sirf: set SPI controller in RISC IO chipselect mode   Mark Brown
• [PATCH 3/5] spi: sirf: make GPIO chipselect function work well   Mark Brown
• [PATCH 4/5] spi: sirf: fix line over 80 characters style issue   Mark Brown
• [PATCH 5/5] spi: sirf: fix spi full-duplex DMA transferring issue   Mark Brown
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Mark Brown
• [PATCH 5/5] spi: sirf: fix spi full-duplex DMA transferring issue   Mark Brown
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Mark Brown
• [PATCH 5/5] spi: sirf: fix spi full-duplex DMA transferring issue   Mark Brown
• [PATCH 2/2] spi: sirf: decrease the interrupt count and latency of PIO mode   Mark Brown
• [PATCH 1/2] spi: sirf: refactor spi transfer functions   Mark Brown
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Mark Brown
• [RFC PATCH v2] regmap: smbus: add support for regmap over smbus   Mark Brown
• [RFC PATCH v2] regmap: smbus: add support for regmap over smbus   Mark Brown
• Rockchip RK3188 I2C driver   Mark Brown
• Rockchip RK3188 I2C driver   Mark Brown
• [RFC PATCH v2] regmap: smbus: add support for regmap over smbus   Mark Brown
• [PATCH] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Mark Brown
• [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used   Mark Brown
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Mark Brown
• [PATCH] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Mark Brown
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Mark Brown
• Rockchip RK3188 I2C driver   Mark Brown
• Rockchip RK3188 I2C driver   Mark Brown
• [PATCH v2 1/2] regmap: add reg_read/reg_write callbacks to regmap_bus struct   Mark Brown
• [PATCH v2 2/2] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Mark Brown
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Mark Brown
• [PATCH 1/5] ASoC: alc5623: Add device tree binding   Mark Brown
• [PATCH 4/5] ASoC: simple-card: Support setting mclk via a fixed factor   Mark Brown
• [PATCH 1/5] ASoC: alc5623: Add device tree binding   Mark Brown
• [PATCH 0/8] ARM: at91: sama5d3: enable sound support   Mark Brown
• [PATCH v4] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Mark Brown
• [PATCH 1/4] arm64: topology: Initialise default topology state immediately   Mark Brown
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH 3/4] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 4/4] arm64: topology: Provide relative power numbers for cores   Mark Brown
• [PATCH 2/2] arm64: topology: add MPIDR-based detection   Mark Brown
• [PATCH 2/2] arm64: topology: add MPIDR-based detection   Mark Brown
• [PATCH 2/2] arm64: topology: add MPIDR-based detection   Mark Brown
• [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup   Mark Brown
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Mark Brown
• [RESEND PATCH] regulator: core: Disable unused regulators after deferred probing is done   Mark Brown
• [PATCH] i2c: exynos5: Initialise Samsung High Speed I2C controller early   Mark Brown
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Mark Brown
• [PATCH 1/2] arm64, sched: Remove unused mc_capable() and smt_capable()   Mark Brown
• [PATCH v3 part1 07/11] ARM64 / ACPI: Introduce arch_fix_phys_package_id() for cpu topology   Mark Brown
• [PATCH v3 part1 07/11] ARM64 / ACPI: Introduce arch_fix_phys_package_id() for cpu topology   Mark Brown
• [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup   Mark Brown
• [alsa-devel] [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Mark Brown
• [PATCH 02/10] mfd: vexpress: Convert custom func API to regmap   Mark Brown
• [PATCH] ASoC: cq93vc: fix cq93vc_get_regmap build error   Mark Brown
• [PATCH 01/15] ASoC: CS42L51 and WM8962 codecs depend on INPUT   Mark Brown
• [alsa-devel] [PATCH 01/15] ASoC: CS42L51 and WM8962 codecs depend on INPUT   Mark Brown
• [alsa-devel] [PATCH 01/15] ASoC: CS42L51 and WM8962 codecs depend on INPUT   Mark Brown
• [PATCH 03/15] ASoC: SMDK_WM8580_PCM needs REGMAP_I2C   Mark Brown
• [PATCH 04/15] ASoC: samsung-idma: avoid 64-bit division   Mark Brown
• [PATCH 05/15] ASoC: nuc900: export nuc900_ac97_data   Mark Brown
• [PATCH 0/4] arm: Add basic support for Mediatek Cortex-A7 SoCs   Matthias Brugger
• [PATCH 1/4] clocksource: Add support for the Mediatek SoCs   Matthias Brugger
• [PATCH 2/4] dt-bindings: add mtk-timer bindings   Matthias Brugger
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Matthias Brugger
• [PATCH 4/4] arm: mediatek: Add earlyprintk support for MT6589   Matthias Brugger
• [PATCH 4/4] arm: mediatek: Add earlyprintk support for MT6589   Matthias Brugger
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Matthias Brugger
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Matthias Brugger
• [PATCH 1/4] clocksource: Add support for the Mediatek SoCs   Matthias Brugger
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Matthias Brugger
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Matthias Brugger
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Eric Bénard
• [PATCH 2/2] net: mvneta: fix usage as a module on RGMII configurations   Gregory CLEMENT
• [PATCH v6 10/11] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Gregory CLEMENT
• Kconfig ARM_ERRATA_753970?   Gregory CLEMENT
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Gregory CLEMENT
• [PATCH 4/4] arm: mediatek: Add earlyprintk support for MT6589   Gregory CLEMENT
• [PATCH 2/4] dt-bindings: add mtk-timer bindings   Gregory CLEMENT
• [PATCH 1/4] clocksource: Add support for the Mediatek SoCs   Gregory CLEMENT
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Gregory CLEMENT
• [PATCH v7 00/11] CPU idle for Armada XP   Gregory CLEMENT
• [PATCH v7 01/11] ARM: PJ4B: Add cpu_suspend/cpu_resume hooks for PJ4B   Gregory CLEMENT
• [PATCH v7 02/11] ARM: mvebu: remove the address parameter for ll_set_cpu_coherent   Gregory CLEMENT
• [PATCH v7 03/11] ARM: mvebu: ll_set_cpu_coherent always uses the current CPU   Gregory CLEMENT
• [PATCH v7 04/11] ARM: mvebu: Remove the unused argument of set_cpu_coherent()   Gregory CLEMENT
• [PATCH v7 05/11] ARM: mvebu: Split low level functions to manipulate HW coherency   Gregory CLEMENT
• [PATCH v7 06/11] ARM: mvebu: Low level function to disable HW coherency support   Gregory CLEMENT
• [PATCH v7 07/11] ARM: mvebu: Allow to power down L2 cache controller in idle mode   Gregory CLEMENT
• [PATCH v7 08/11] ARM: mvebu: Add the PMSU related part of the cpu idle functions   Gregory CLEMENT
• [PATCH v7 09/11] ARM: mvebu: Register notifier callback for the cpuidle transition   Gregory CLEMENT
• [PATCH v7 10/11] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Gregory CLEMENT
• [PATCH v7 11/11] ARM: mvebu: register the cpuidle driver for the Armada XP SoCs   Gregory CLEMENT
• [PATCH v2 0/4] ARM: mvebu: fix bus width handling in mvebu-devbus   Gregory CLEMENT
• [PATCH 3/4] ARM: MVEBU: Add LaCie 2Big and 5Big Network v2   Gregory CLEMENT
• [PATCH v3 02/13] ARM: append ARCH_MULTI_V7_LPAE   Gregory CLEMENT
• [PATCH v3 02/13] ARM: append ARCH_MULTI_V7_LPAE   Gregory CLEMENT
• [PATCH v3 02/13] ARM: append ARCH_MULTI_V7_LPAE   Gregory CLEMENT
• [PATCH 1/5] ARM: mvebu: specify I2C bus frequency on Armada 370 DB   Gregory CLEMENT
• [PATCH 2/5] ARM: mvebu: enable the SATA interface on Armada 375 DB   Gregory CLEMENT
• [PATCH 3/5] ARM: mvebu: use clocks property for serial ports   Gregory CLEMENT
• [PATCH 4/5] ARM: mvebu: remove clock-frequency of serial port Device Tree nodes   Gregory CLEMENT
• [PATCH 5/5] ARM: mvebu: don't use clocks property in UART node for Netgear RN2120   Gregory CLEMENT
• [PATCH 0/8] USB3 support for Armada 38x   Gregory CLEMENT
• [PATCH 1/8] usb: host: xhci-plat: Allow to register glue code using the device tree   Gregory CLEMENT
• [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code   Gregory CLEMENT
• [PATCH 3/8] xhci-platform: Add a new controller using xhci: Armada 38x   Gregory CLEMENT
• [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support   Gregory CLEMENT
• [PATCH 5/8] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x   Gregory CLEMENT
• [PATCH 6/8] ARM: mvebu: Add USB3 support for Armada 38x   Gregory CLEMENT
• [PATCH 7/8] ARM: configs: Add usb_xhci_mvebu to mvebu_v7_defconfig   Gregory CLEMENT
• [PATCH 8/8] ARM: configs: Add usb_xhci_mvebu to multi_v7_defconfig   Gregory CLEMENT
• [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code   Gregory CLEMENT
• [PATCH 5/8] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x   Gregory CLEMENT
• [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support   Gregory CLEMENT
• [PATCH 0/2] ARM: mvebu: board-v7 cleanup   Gregory CLEMENT
• [PATCH 1/2] ARM: mvebu: remove unnecessary ifdef around l2x0_of_init   Gregory CLEMENT
• [PATCH 2/2] ARM: mvebu: fix the name of the parameter used in mvebu_get_soc_id   Gregory CLEMENT
• [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code   Gregory CLEMENT
• [PATCH v2 00/18] USB support for Armada 38x and Armada 375   Gregory CLEMENT
• [PATCH v2 01/18] usb: host: xhci-plat: Sort the headers in alphabetic order   Gregory CLEMENT
• [PATCH v2 02/18] usb: host: xhci-plat: Add clocks support   Gregory CLEMENT
• [PATCH v2 03/18] usb: host: xhci-plat: Add support for the Armada 38x   Gregory CLEMENT
• [PATCH v2 04/18] xhci-platform: Add a new controller using xhci: Armada 38x   Gregory CLEMENT
• [PATCH v2 05/18] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x   Gregory CLEMENT
• [PATCH v2 06/18] ARM: mvebu: Add Device Tree description of EHCI hosts on Armada 38x   Gregory CLEMENT
• [PATCH v2 07/18] ARM: mvebu: Add USB3 support for Armada 38x   Gregory CLEMENT
• [PATCH v2 08/18] ARM: configs: Add usb_xhci_mvebu to mvebu_v7_defconfig   Gregory CLEMENT
• [PATCH v2 09/18] ARM: configs: Add usb_xhci_mvebu to multi_v7_defconfig   Gregory CLEMENT
• [PATCH v2 10/18] usb: host: xhci-plat: Add support for the Armada 375   Gregory CLEMENT
• [PATCH v2 11/18] xhci-platform: Add a new controller using xhci: Armada 375   Gregory CLEMENT
• [PATCH v2 12/18] ARM: mvebu: Add Device Tree description of USB cluster controller on Armada 375   Gregory CLEMENT
• [PATCH v2 13/18] dt: binding: Armada 375 USB cluster   Gregory CLEMENT
• [PATCH v2 14/18] ARM: mvebu: Add support for USB cluster on the Armada 375 SoC   Gregory CLEMENT
• [PATCH v2 15/18] ARM: mvebu: Add USB3 support for Armada 375   Gregory CLEMENT
• [PATCH v2 16/18] ARM: mvebu: add USB3 controller Device Tree details for Armada 375   Gregory CLEMENT
• [PATCH v2 17/18] ARM: mvebu: dts: Enable USB3 in Armada 375 DB   Gregory CLEMENT
• [PATCH v2 18/18] ARM: mvebu: Add Device Tree description of EHCI hosts on Armada 375   Gregory CLEMENT
• [PATCH v2 02/18] usb: host: xhci-plat: Add clocks support   Gregory CLEMENT
• [PATCH v2 02/18] usb: host: xhci-plat: Add clocks support   Gregory CLEMENT
• [PATCH v2] pinctrl: st: use gpiolib irqchip helpers   Maxime COQUELIN
• [PATCH 0/2] pinctrl: st: Driver fixing & clean-up   Maxime COQUELIN
• [PATCH 1/2] pinctrl: st: Use const qualifier when required   Maxime COQUELIN
• [PATCH 2/2] pinctrl: st: Use ARRAY_SIZE for STiH415 data   Maxime COQUELIN
• [linux-sunxi] Re: [PATCH v3 01/10] mfd: AXP20x: Add mfd driver for AXP20x PMIC   Carlo Caione
• [PATCH v4 0/9] mfd: AXP20x: Add support for AXP202 and AXP209   Carlo Caione
• [PATCH v4 1/9] mfd: AXP20x: Add mfd driver for AXP20x PMIC   Carlo Caione
• [PATCH v4 2/9] dt-bindings: add vendor-prefix for X-Powers   Carlo Caione
• [PATCH v4 3/9] mfd: AXP20x: Add bindings documentation   Carlo Caione
• [PATCH v4 4/9] input: misc: Add driver for AXP20x Power Enable Key   Carlo Caione
• [PATCH v4 5/9] input: misc: Add ABI docs for AXP20x PEK   Carlo Caione
• [PATCH v4 6/9] regulator: AXP20x: Add support for regulators subsystem   Carlo Caione
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Carlo Caione
• [PATCH v4 8/9] ARM: sunxi: Add AXP20x support in defconfig   Carlo Caione
• [PATCH v4 9/9] ARM: sunxi: Add AXP20x support multi_v7_defconfig   Carlo Caione
• [linux-sunxi] Re: [PATCH v4 1/9] mfd: AXP20x: Add mfd driver for AXP20x PMIC   Carlo Caione
• [linux-sunxi] Re: [PATCH v4 6/9] regulator: AXP20x: Add support for regulators subsystem   Carlo Caione
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Carlo Caione
• [linux-sunxi] Re: [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Carlo Caione
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Carlo Caione
• [linux-sunxi] Re: [PATCH v4 4/9] input: misc: Add driver for AXP20x Power Enable Key   Carlo Caione
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Carlo Caione
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add ARM PMU in A31 DTSI   Julian Calaby
• [PATCH] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Jonathan Cameron
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Jonathan Cameron
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Jonathan Cameron
• [RFC v2] ARM VM System Specification   Ian Campbell
• [Xen-devel] [PATCH RFC] arm64: 32-bit tolerant sync bitops   Ian Campbell
• [Xen-devel] [PATCH RFC] arm64: 32-bit tolerant sync bitops   Ian Campbell
• [Xen-devel] [PATCH RFC] arm64: 32-bit tolerant sync bitops   Ian Campbell
• [PATCH 0/5] GPIO OMAP driver changes for v3.16   Javier Martinez Canillas
• [PATCH 1/5] gpio: omap: convert to use irq_domain_add_simple()   Javier Martinez Canillas
• [PATCH 2/5] gpio: omap: check gpiochip_add() return value   Javier Martinez Canillas
• [PATCH 3/5] gpio: omap: add a GPIO_OMAP option instead of using ARCH_OMAP   Javier Martinez Canillas
• [PATCH 4/5] gpio: omap: convert driver to use gpiolib irqchip   Javier Martinez Canillas
• [PATCH 5/5] MAINTAINERS: update GPIO OMAP driver entry   Javier Martinez Canillas
• [PATCH] arm/igep0020: fix IGEPv2 boot   Javier Martinez Canillas
• [PATCH] arm/igep0020: fix IGEPv2 boot   Javier Martinez Canillas
• [PATCH] arm/igep0020: fix IGEPv2 boot   Javier Martinez Canillas
• [PATCH 4/5] gpio: omap: convert driver to use gpiolib irqchip   Javier Martinez Canillas
• [PATCH 0/5] GPIO OMAP driver changes for v3.16   Javier Martinez Canillas
• [PATCH 0/5] GPIO OMAP driver changes for v3.16   Javier Martinez Canillas
• [PATCH] gpio/at91: free GPIO after configuring as input   Javier Martinez Canillas
• [PATCH 0/4] pinctrl: sirf: switch to one gpiolib and gpiolib_irqchip helpers   Javier Martinez Canillas
• [PATCH 0/4] pinctrl: sirf: switch to one gpiolib and gpiolib_irqchip helpers   Javier Martinez Canillas
• [PATCH v3 1/4] MAINTAINERS: Add entry for APM X-Gene SoC ethernet driver   Javier Martinez Canillas
• [PATCH 0/2] Fix few omap gpmc regressions when booted with device tree   Javier Martinez Canillas
• [PATCH] gpio: omap: implement get_direction   Javier Martinez Canillas
• [PATCH 0/2] Fix few omap gpmc regressions when booted with device tree   Javier Martinez Canillas
• [PATCH 0/5] GPIO OMAP driver changes for v3.16   Javier Martinez Canillas
• [PATCH 1/1] ARM: dts: omap3-igep0020: use SMSC9221 timings   Javier Martinez Canillas
• [PATCH] gpio: always enable GPIO_OMAP on ARCH_OMAP   Javier Martinez Canillas
• [PATCH] gpio: always enable GPIO_OMAP on ARCH_OMAP   Javier Martinez Canillas
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Sebastian Capella
• [PATCH v9 1/2] ARM: avoid tracers in soft_restart   Sebastian Capella
• [PATCH v7 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v7 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v7 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v7 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v2 2/2] ARM: mm: allow text and rodata sections to be read-only   Steve Capper
• [PATCH v2 1/2] ARM: mm: allow non-text sections to be non-executable   Steve Capper
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Steve Capper
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Steve Capper
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Steve Capper
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Steve Capper
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Steve Capper
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Steve Capper
• [PATCH V2 1/5] mm: hugetlb: Introduce huge_pte_{page,present,young}   Steve Capper
• [PATCH V2 2/5] arm: mm: Adjust the parameters for __sync_icache_dcache   Steve Capper
• [PATCH V2 3/5] arm: mm: Make mmu_gather aware of huge pages   Steve Capper
• [PATCH V2 4/5] arm: mm: HugeTLB support for non-LPAE systems   Steve Capper
• [PATCH V2 5/5] arm: mm: Add Transparent HugePage support for non-LPAE   Steve Capper
• [PATCH v3 6/7] arm64: mm: Implement 4 levels of translation tables   Steve Capper
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Steve Capper
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Steve Capper
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Steve Capper
• [PATCH] arm64: mm: Add THP TLB entries to general mmu_gather   Steve Capper
• [PATCH V2] arm64: mm: Add THP TLB entries to general mmu_gather   Steve Capper
• [PATCH v3 6/7] arm64: mm: Implement 4 levels of translation tables   Steve Capper
• [PATCH] arm64: mm: Create gigabyte kernel logical mappings where possible   Steve Capper
• [RFC PATCH V4 6/7] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic   Steve Capper
• [PATCH v12][ 01/12] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.   Denis Carikli
• [PATCH v12][ 02/12] imx-drm: Add RGB666 support for parallel display.   Denis Carikli
• [PATCH v12][ 03/12] imx-drm: Correct BGR666 and the board's dts that use them.   Denis Carikli
• [PATCH v12][ 04/12] imx-drm: Match ipu_di_signal_cfg's clk_pol with its description.   Denis Carikli
• [PATCH v12][ 05/12] imx-drm: use defines for clock polarity settings   Denis Carikli
• [PATCH v12][ 06/12] ARM: dts: imx5*, imx6*: correct display-timings nodes.   Denis Carikli
• [PATCH v12][ 07/12] drm: drm_display_mode: add signal polarity flags   Denis Carikli
• [PATCH v12][ 08/12] imx-drm: Use drm_display_mode timings flags.   Denis Carikli
• [PATCH v12][ 09/12] drm/panel: Add Eukrea mbimxsd51 displays.   Denis Carikli
• [PATCH v12][ 10/12] ARM: dts: mbimx51sd: Add display support.   Denis Carikli
• [PATCH v12][ 11/12] ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.   Denis Carikli
• [PATCH v12][ 12/12] ARM: imx_v6_v7_defconfig: Add more drm drivers.   Denis Carikli
• [PATCH v2][ 1/3] chipidea: usbmisc_imx: Allow USB OTG to work on mx51   Denis Carikli
• [PATCH v2][ 2/3] ARM: dts: mbimxsd51 baseboard: Add USB support.   Denis Carikli
• [PATCH v2][ 3/3] ARM: imx_v6_v7_defconfig: Enable drivers for i.MX51 USB Host support.   Denis Carikli
• [PATCH v12][ 07/12] drm: drm_display_mode: add signal polarity flags   Denis Carikli
• [PATCH v11][ 1/2] ARM: dts: cpuimx35 Add touchscreen support.   Denis Carikli
• [PATCH v11][ 2/2] ARM: dts: cpuimx51 Add touchscreen support.   Denis Carikli
• [patch] clk: vt8500: several forever loops   Dan Carpenter
• [patch] clk: vt8500: several forever loops   Dan Carpenter
• [patch] clk: vexpress: NULL dereference on error path   Dan Carpenter
• [PATCH 2/4] soc: qcom: Add GSBI driver   Josh Cartwright
• [PATCH 2/4] soc: qcom: Add GSBI driver   Josh Cartwright
• [PATCH] arm: socfpga: reserve the region at start of phys mem   Josh Cartwright
• [PATCH] arm: socfpga: reserve the region at start of phys mem   Josh Cartwright
• [RFC v2] ARM VM System Specification   Michael Casadevall
• [PATCH V2] mmc: dw_mmc: exynos: Turn SDIO interrupts on   Yuvaraj Cd
• [PATCH 2/2 v4] i2c: exynos5: configure fifo_depth based on HSI2C module variant   Naveen Krishna Ch
• [PATCH 1/2 v4] i2c: exynos5: add support for HSI2C on Exynos5260 SoC   Naveen Krishna Ch
• [PATCH] arm/imx: factor device tree timer initialization   Gilles Chanteperdrix
• [PATCH] arm/igep0020: fix IGEPv2 boot   Gilles Chanteperdrix
• [PATCH] arm/twd: use smp_twd clock even with DT   Gilles Chanteperdrix
• [PATCH] arm/igep0020: fix IGEPv2 boot   Gilles Chanteperdrix
• [PATCH] arm/omap4: add twd clock to DT   Gilles Chanteperdrix
• [PATCH] arm/igep0020: fix IGEPv2 boot   Gilles Chanteperdrix
• [PATCH] arm/omap4: add twd clock to DT   Gilles Chanteperdrix
• [PATCH] i2c: exynos5: Initialise Samsung High Speed I2C controller early   Naveen Krishna Chatradhi
• [PATCH] i2c: mux: Use subsys_initcall for the i2c-arb-gpio-challenge   Naveen Krishna Chatradhi
• [PATCH] i2c: exynos5: add support for HSI2C on Exynos5260 SoC   Naveen Krishna Chatradhi
• [PATCH v7 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Ashwin Chaugule
• [PATCH v8 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Ashwin Chaugule
• [PATCH v6 0/3] PSCI v0.2 support and DT bindings   Ashwin Chaugule
• [PATCH v6 1/3] PSCI: Add initial support for PSCIv0.2 functions   Ashwin Chaugule
• [PATCH v6 2/3] Documentation: devicetree: Add new binding for PSCIv0.2   Ashwin Chaugule
• [PATCH v6 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v6 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v6 1/3] PSCI: Add initial support for PSCIv0.2 functions   Ashwin Chaugule
• [PATCH v6 1/3] PSCI: Add initial support for PSCIv0.2 functions   Ashwin Chaugule
• [PATCH v6 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v6 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v7 0/3] PSCI v0.2 support and DT bindings   Ashwin Chaugule
• [PATCH v7 1/3] PSCI: Add initial support for PSCIv0.2 functions   Ashwin Chaugule
• [PATCH v7 2/3] Documentation: devicetree: Add new binding for PSCIv0.2   Ashwin Chaugule
• [PATCH v7 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v8 0/3] PSCI v0.2 support and DT bindings   Ashwin Chaugule
• [PATCH v8 1/3] PSCI: Add initial support for PSCIv0.2 functions   Ashwin Chaugule
• [PATCH v8 2/3] Documentation: devicetree: Add new binding for PSCIv0.2   Ashwin Chaugule
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v7 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Ashwin Chaugule
• [PATCH v10 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Ashwin Chaugule
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Hubert Chaumette
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Hubert Chaumette
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Hubert Chaumette
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Hubert Chaumette
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Hubert Chaumette
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Hubert Chaumette
• [PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller   Mauro Carvalho Chehab
• [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used   Nicolin Chen
• [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used   Nicolin Chen
• [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used   Nicolin Chen
• [PATCH 3/4] ARM: imx: add shared gate clock support   Nicolin Chen
• [PATCH 0/4] ARM: imx: shared gate support for i.MX clk_gate2 clock   Nicolin Chen
• USB OTG support on mx27pdk   Peter Chen
• USB OTG support on mx27pdk   Peter Chen
• USB OTG support on mx27pdk   Peter Chen
• USB OTG support on mx27pdk   Peter Chen
• USB OTG support on mx27pdk   Peter Chen
• [PATCH 0/6] Add CPTS support for AM437x   George Cherian
• [PATCH 1/6] drivers: net: cpts: Remove hardcoded clock name for CPTS   George Cherian
• [PATCH 2/6] ARM: dts: am33xx: Add clock names for cpsw and cpts   George Cherian
• [PATCH 3/6] drivers: net: cpsw: Enable CPTS for DRA7xx and AM4372   George Cherian
• [PATCH 4/6] drivers: net: cpsw: Enable Annexe F Time sync   George Cherian
• [PATCH 5/6] ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk   George Cherian
• [PATCH 6/6] ARM: dts: am4372: Add clock names for cpsw and cpts   George Cherian
• [PATCH 5/6] ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk   George Cherian
• [PATCH 4/6] drivers: net: cpsw: Enable Annexe F Time sync   George Cherian
• [PATCH] ARM: dts: am33xx: fix DMA support for the second USB interface   George Cherian
• [PATCH 1/4] ARM: dts: am335x-bone-common: use phandles for USB and DMA refs   George Cherian
• [PATCH 1/6] drivers: net: cpts: Remove hardcoded clock name for CPTS   George Cherian
• [PATCH 5/6] ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk   George Cherian
• [PATCH] ARM: dts: am33xx: fix DMA support for the second USB interface   George Cherian
• [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   George Cherian
• [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   George Cherian
• [PATCH v4 00/16] mfd: max14577: Add support for MAX77836   Chanwoo Choi
• [PATCH 00/27] Support new Exynos3250 SoC based on Cortex-A7 dual core   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH 02/27] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250   Chanwoo Choi
• [PATCH 03/27] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Chanwoo Choi
• [PATCH 04/27] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Chanwoo Choi
• [PATCH 05/27] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCH 06/27] ARM: EXYNOS:: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCH 07/27] irqchip: Declare cortex-a7's irqchip to initialize gic from dt   Chanwoo Choi
• [PATCH 08/27] pinctrl: exynos: Add driver data for Exynos3250   Chanwoo Choi
• [PATCH 00/27] Support new Exynos3250 SoC based on Cortex-A7 dual core   Chanwoo Choi
• [PATCH 00/27] Support new Exynos3250 SoC based on Cortex-A7 dual core   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH 02/27] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250   Chanwoo Choi
• [PATCH 03/27] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Chanwoo Choi
• [PATCH 04/27] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Chanwoo Choi
• [PATCH 05/27] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCH 06/27] ARM: EXYNOS:: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCH 07/27] irqchip: Declare cortex-a7's irqchip to initialize gic from dt   Chanwoo Choi
• [PATCH 08/27] pinctrl: exynos: Add driver data for Exynos3250   Chanwoo Choi
• [PATCH 09/27] clk: samsung: exynos3250: Add clocks using common clock framework   Chanwoo Choi
• [PATCH 10/27] ARM: dts: exynos3250: Add new exynos3250.dtsi file   Chanwoo Choi
• [PATCH 11/27] ARM: dts: exynos3250: Add GIC dt node for Exynos3250   Chanwoo Choi
• [PATCH 12/27] ARM: dts: exynos3250: Add default interrupt-parent connected with GIC   Chanwoo Choi
• [PATCH 13/27] ARM: dts: exynos3250: Add pin control device tree data   Chanwoo Choi
• [PATCH 14/27] ARM: dts: exynos3250: Add device tree nodes for clock controllers   Chanwoo Choi
• [PATCH 15/27] ARM: dts: exynos3250: Add uart dt node to support seiral ports   Chanwoo Choi
• [PATCH 16/27] ARM: dts: exynos3250: Add MCT dt node   Chanwoo Choi
• [PATCH 17/27] ARM: dts: exynos3250: Add ADC dt node to read analog raw data   Chanwoo Choi
• [PATCH 18/27] ARM: dts: exynos3250: Add i2c dt node   Chanwoo Choi
• [PATCH 19/27] ARM: dts: exynos3250: Add Mobile Storage Host Card   Chanwoo Choi
• [PATCH 20/27] ARM: dts: exynos3250: Move definitions of external clocks to SoC dtsi   Chanwoo Choi
• [PATCH 21/27] ARM: dts: exynos3250: Add PMU dt data   Chanwoo Choi
• [PATCH 22/27] ARM: dts: exynos3250: Add amba and pdma dt node   Chanwoo Choi
• [PATCH 23/27] ARM: dts: exynos3250: Add spi dt node to support spi bus   Chanwoo Choi
• [PATCH 24/27] ARM: dts: exynos3250: Add pwm dt node to support PWM Timer   Chanwoo Choi
• [PATCH 25/27] ARM: dts: exynos3250: Add RTC dt node   Chanwoo Choi
• [PATCH 26/27] ARM: dts: exynos3250: Add power domain dt nodes   Chanwoo Choi
• [PATCH 27/27] ARM: dts: exynos3250: Add CPUs dt node for Exynos3250   Chanwoo Choi
• [PATCH 06/27] ARM: EXYNOS:: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCH 06/27] ARM: EXYNOS:: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCH 21/27] ARM: dts: exynos3250: Add PMU dt data   Chanwoo Choi
• [PATCH 06/27] ARM: EXYNOS:: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCH 08/27] pinctrl: exynos: Add driver data for Exynos3250   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCH 03/27] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Chanwoo Choi
• [PATCH 12/27] ARM: dts: exynos3250: Add default interrupt-parent connected with GIC   Chanwoo Choi
• [PATCH 10/27] ARM: dts: exynos3250: Add new exynos3250.dtsi file   Chanwoo Choi
• [PATCH 15/27] ARM: dts: exynos3250: Add uart dt node to support seiral ports   Chanwoo Choi
• [PATCH 04/27] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCHv2] pinctrl: exynos: Add driver data for Exynos3250   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH 03/27] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCHv2 0/2] iio: adc: exynos_adc: Support Exynos3250 ADC   Chanwoo Choi
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCHv2 2/2] iio: devicetree: Add DT binding documentation for Exynos3250 ADC   Chanwoo Choi
• [PATCHv2 0/8] Support new Exynos3250 SoC based on Cortex-A7 dual core   Chanwoo Choi
• [PATCHv2 1/8] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCHv2 2/8] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250   Chanwoo Choi
• [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Chanwoo Choi
• [PATCHv2 4/8] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Chanwoo Choi
• [PATCHv2 5/8] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCHv2 6/8] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCHv2 7/8] clk: samsung: exynos3250: Add clocks using common clock framework   Chanwoo Choi
• [PATCHv2 8/8] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCHv2 8/8] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Chanwoo Choi
• [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Chanwoo Choi
• [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Chanwoo Choi
• [PATCHv2 8/8] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCHv2 8/8] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCHv2 8/8] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCHv3 0/2] iio: adc: exynos_adc: Support Exynos3250 ADC   Chanwoo Choi
• [PATCHv3 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Chanwoo Choi
• [PATCHv3 2/2] iio: devicetree: Add DT binding documentation for Exynos3250 ADC   Chanwoo Choi
• [PATCHv2] pinctrl: exynos: Add driver data for Exynos3250   Chanwoo Choi
• [PATCHv2 8/8] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCH Resend 3/3] ARM: EXYNOS: Map SYSRAM address through DT   Chanwoo Choi
• [PATCH Resend] ARM: EXYNOS: Map SYSRAM address through DT   Chanwoo Choi
• [PATCHv2 6/8] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCH v2 1/3] ARM: EXYNOS: Map PMU address through DT   Chanwoo Choi
• [PATCHv2 5/8] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCHv2 5/8] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCHv3 2/2] iio: devicetree: Add DT binding documentation for Exynos3250 ADC   Chanwoo Choi
• [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core   Chanwoo Choi
• [PATCHv3 1/7] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCHv3 2/7] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Chanwoo Choi
• [PATCHv3 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCHv3 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCHv3 5/7] clk: samsung: exynos3250: Add clocks using common clock framework   Chanwoo Choi
• [PATCHv3 6/7] dt-bindings: add documentation for Exynos3250 clock controller   Chanwoo Choi
• [PATCHv3 7/7] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCH 0/2] Support cpufreq driver for Exynos3250   Chanwoo Choi
• [PATCH 1/2] cpufreq: exynos: Use dev_err/info function instead of pr_err/info   Chanwoo Choi
• [PATCH 2/2] cpufreq: exynos: Add new Exynos3250 cpufreq driver   Chanwoo Choi
• [PATCH 1/4] ARM: EXYNOS: Fix definitions of S5P_ARM_CORE_* registers   Chanwoo Choi
• [PATCH 0/2] Support cpufreq driver for Exynos3250   Chanwoo Choi
• [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core   Chanwoo Choi
• [PATCH 1/2] cpufreq: exynos: Use dev_err/info function instead of pr_err/info   Chanwoo Choi
• [PATCHv2] pinctrl: exynos: Add driver data for Exynos3250   Chanwoo Choi
• [PATCHv4 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core   Chanwoo Choi
• [PATCHv4 1/7] ARM: EXYNOS: Add Exynos3250 SoC ID   Chanwoo Choi
• [PATCHv4 2/7] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Chanwoo Choi
• [PATCHv4 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCHv4 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCHv4 5/7] clk: samsung: exynos3250: Add clocks using common clock framework   Chanwoo Choi
• [PATCHv4 6/7] dt-bindings: add documentation for Exynos3250 clock controller   Chanwoo Choi
• [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250   Chanwoo Choi
• [PATCHv4 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCHv4 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Chanwoo Choi
• [PATCH 4/5] devfreq: exynos4: Use devm_devfreq_* function using device resource management   Chanwoo Choi
• [PATCH 5/5] devfreq: exynos5: Use devm_devfreq_* function using device resource management   Chanwoo Choi
• [PATCHv5] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Chanwoo Choi
• [PATCH 5/5] devfreq: exynos5: Use devm_devfreq_* function using device resource management   Chanwoo Choi
• [PATCHv4 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Chanwoo Choi
• [PATCH V2] ARM: EXYNOS: cpu hotplug: use v7_exit_coherency_flush macro for cache disabling   Chanwoo Choi
• [PATCH 2/2] cpufreq: Remove exynos_sort_descend_freq_table in exynos5440-cpufreq.c   Jonghwan Choi
• [PATCH 2/2] cpufreq: Remove exynos_sort_descend_freq_table in exynos5440-cpufreq.c   Jonghwan Choi
• [PATCH 2/3] cpufreq: Removed exynos_sort_descend_freq_table funtion   Jonghwan Choi
• [PATCH 3/3] cpufreq: Pass third argument as function parameter is   Jonghwan Choi
• [STLinux Kernel] [PATCH 3/4] ARM: dts: Typo s/interrupts-names/interrupt-names/g   Patrice Chotard
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Punnaiah Choudary
• [PATCH 35/38] mmc: dw_mmc: call mmc_of_parse to fill in common options   Jaehoon Chung
• [RFC] ARM64: 4 level page table translation for 4KB pages   Sungjinn Chung
• [RFC] ARM64: 4 level page table translation for 4KB pages   Sungjinn Chung
• [RFC] ARM64: 4 level page table translation for 4KB pages   Sungjinn Chung
• [PATCH RFC 4/8] drm: msm: update to use component match support   Rob Clark
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Lars-Peter Clausen
• [RFC PATCH v2] regmap: smbus: add support for regmap over SMBus   Lars-Peter Clausen
• [RFC PATCH v2] regmap: smbus: add support for regmap over smbus   Lars-Peter Clausen
• [RFC PATCH v2] regmap: smbus: add support for regmap over smbus   Lars-Peter Clausen
• [PATCH v2 2/2] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Lars-Peter Clausen
• [alsa-devel] [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Lars-Peter Clausen
• [alsa-devel] [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Lars-Peter Clausen
• Marvell Orion5x boards with PCIe, and DT conversion   Alexander Clouter
• The Alphabet (or, the sorting of Kconfig symbols)   Richard Cochran
• The Alphabet (or, the sorting of Kconfig symbols)   Richard Cochran
• [PATCH 1/6] drivers: net: cpts: Remove hardcoded clock name for CPTS   Richard Cochran
• [PATCH 5/6] ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk   Richard Cochran
• [PATCH 4/6] drivers: net: cpsw: Enable Annexe F Time sync   Richard Cochran
• [PATCH 5/6] ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk   Richard Cochran
• [PATCH] arm: don't allow CONFIG_DEBUG_SET_MODULE_RONX if CONFIG_JUMP_LABEL is enabled   Kees Cook
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Kees Cook
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Kees Cook
• [PATCH] arm: don't allow CONFIG_DEBUG_SET_MODULE_RONX if CONFIG_JUMP_LABEL is enabled   Kees Cook
• [PATCH] arm: don't allow CONFIG_DEBUG_SET_MODULE_RONX if CONFIG_JUMP_LABEL is enabled   Kees Cook
• [RFC PATCH] ARM: mm: implement CONFIG_DEBUG_RODATA   Kees Cook
• [PATCH 1/2] ARM: mm: mark non-text sections non-executable   Kees Cook
• [PATCH 2/2] ARM: mm: make text and rodata read-only   Kees Cook
• [PATCH] arm: ftrace: work with CONFIG_DEBUG_SET_MODULE_RONX   Kees Cook
• [PATCH 2/2] ARM: mm: make text and rodata read-only   Kees Cook
• [PATCH 2/2] arm: use fixmap for text patching when text is RO   Kees Cook
• [PATCH v2] ARM: mm: implement CONFIG_DEBUG_RODATA   Kees Cook
• [PATCH v2 1/2] ARM: mm: allow non-text sections to be non-executable   Kees Cook
• [PATCH v2 2/2] ARM: mm: allow text and rodata sections to be read-only   Kees Cook
• [PATCH 2/2] ARM: mm: make text and rodata read-only   Kees Cook
• [PATCH 2/2] ARM: mm: make text and rodata read-only   Kees Cook
• [PATCH 2/2] ARM: mm: make text and rodata read-only   Kees Cook
• [PATCH v2 2/2] ARM: mm: allow text and rodata sections to be read-only   Kees Cook
• [RFC PATCH 1/3] ARM: kexec: Make kexec work with read-only kernel .text section   Kees Cook
• [RFC PATCH 2/3] ARM: Kconfig: remove dependence of CONFIG_DEBUG_RODATA on !kexec   Kees Cook
• [PATCH v2 2/2] ARM: mm: allow text and rodata sections to be read-only   Kees Cook
• [PATCH v2 0/2] ARM: mm: implement CONFIG_DEBUG_RODATA   Kees Cook
• [PATCH v2 1/2] ARM: mm: allow non-text sections to be non-executable   Kees Cook
• [PATCH v2 2/2] ARM: mm: allow text and rodata sections to be read-only   Kees Cook
• [PATCH v5] ARM: vDSO gettimeofday using generic timer architecture   Kees Cook
• [RFC PATCH 1/3] ARM: kexec: Make kexec work with read-only kernel .text section   Kees Cook
• [PATCH 2/2] arm: use fixmap for text patching when text is RO   Kees Cook
• [PATCH 0/3] Make kexec work with CONFIG_DEBUG_RODATA enabled   Kees Cook
• [PATCH 2/2] ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the relevant defconfigs   Jason Cooper
• [PATCH 0/5] Kirkwood DT Documentation   Jason Cooper
• [PATCH 0/2] ARM: mvebu: add a clock for mdio nodes on Armada 370/38x/XP   Jason Cooper
• [PATCH 3/3] ARM: kirkwood: rename kirwood-nsa310-common to 3x0-common   Jason Cooper
• [PATCH v2] bus: mvebu-mbus: Avoid setting an undefined window size   Jason Cooper
• [GIT PULL] ARM: mvebu: DT fixes-non-critical for v3.15-rc1   Jason Cooper
• [PATCH 4/6] thermal: armada: Support Armada 375 SoC   Jason Cooper
• [PATCH 4/6] thermal: armada: Support Armada 375 SoC   Jason Cooper
• [PATCH 4/6] thermal: armada: Support Armada 375 SoC   Jason Cooper
• [PATCH 5/6] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Jason Cooper
• [PATCH 1/2] ARM: mvebu: Enable nfsroot in the defconfig   Jason Cooper
• [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x   Jason Cooper
• [PATCH v2 1/4] memory: mvebu-devbus: fix the conversion of the bus width   Jason Cooper
• [PATCH v2 1/4] memory: mvebu-devbus: fix the conversion of the bus width   Jason Cooper
• [PATCH 01/29] ARM: orion5x: fix target ID for crypto SRAM window   Jason Cooper
• [GIT PULL] ARM: mvebu: DT fixes-non-critical for v3.15-rc1   Jason Cooper
• [PATCH v2 2/4] ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree   Jason Cooper
• [PATCH 3/3] ARM: mvebu: use qsgmii phy-mode for Armada XP GP interfaces   Jason Cooper
• [PATCH v2 2/4] ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree   Jason Cooper
• [PATCH 2/5] ARM: Kirkwood: Use DT to instansiate codec   Jason Cooper
• [PATCH 0/5] Simple-audio-card support for HP t5325   Jason Cooper
• [PATCH 1/4] ARM: Kirkwood: Add board file for netxbig LEDs   Jason Cooper
• [PATCH 3/4] ARM: MVEBU: Add LaCie 2Big and 5Big Network v2   Jason Cooper
• [PATCH 0/4] Add a DT description of LaCie 2Big and 5Big Network v2   Jason Cooper
• [PATCH 0/5] ARM: mvebu: misc Device Tree fixes and updates   Jason Cooper
• [PATCH 0/7] Fixes for Armada 370/XP PCIe   Jason Cooper
• [PATCH 0/7] Fixes for Armada 370/XP PCIe   Jason Cooper
• [PATCH 0/7] Fixes for Armada 370/XP PCIe   Jason Cooper
• [PATCH v2 03/38] pinctrl: mvebu: new driver for Orion platforms   Jason Cooper
• [PATCH 0/3] net: mvneta: fix usage as a module, and support QSGMII properly   Jason Cooper
• [PATCH 4/7] pci: mvebu: fix off-by-one in the computed size of the mbus windows   Jason Cooper
• [PATCH] ARM: Kirkwood: T5325: Fix double probe of Codec   Jason Cooper
• [PATCH] ARM: mvebu: Add a SOC bus device entry   Jason Cooper
• [PATCH 1/2] ARM: mvebu: Enable nfsroot in the defconfig   Jason Cooper
• [PATCH 0/3] ARM: kirkwood: Add device tree for NSA320   Jason Cooper
• [RESEND/PATCH v4 0/9] Watchdog support for Armada 375/38x SoC   Jason Cooper
• [PATCH v3 00/10] ARM: mvebu: Hardware coherency support for Armada 375 and 38x   Jason Cooper
• [PATCH v3 0/6] ARM: mvebu: prepare PMSU code for cpuidle and Armada 375/38x SMP   Jason Cooper
• [PATCH v3 00/11] SMP support for Armada 375 and 38x   Jason Cooper
• [PATCH] ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled   Jason Cooper
• [PATCH v2 0/3] ARM: mvebu: enable SDHCI interface on Armada 38x   Jason Cooper
• [PATCH v2 3/3] ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the multi_v7_defconfig   Jason Cooper
• [PATCH] ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled   Jason Cooper
• [PATCH v7 04/11] ARM: mvebu: Remove the unused argument of set_cpu_coherent()   Jason Cooper
• [PATCH v7 00/11] CPU idle for Armada XP   Jason Cooper
• [PATCHv3 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces   Jason Cooper
• [PATCHv3 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles   Jason Cooper
• [PATCHv3 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig   Jason Cooper
• [PATCHv3 3/5] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x   Jason Cooper
• [PATCHv3 4/5] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig   Jason Cooper
• [PATCH 0/5] ARM: mvebu: misc Device Tree fixes and updates   Jason Cooper
• [PATCH 0/2] ARM: mvebu: board-v7 cleanup   Jason Cooper
• [PATCH] ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled   Jason Cooper
• [PATCH v2 00/10] thermal: Armada 375/380 SoC support   Jason Cooper
• [PATCH v2 04/38] clk: mvebu: add Orion5x clock driver   Jason Cooper
• [PATCH v2 05/38] memory: mvebu-devbus: use ARMADA_ prefix in defines   Jason Cooper
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Jason Cooper
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Jason Cooper
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Jason Cooper
• [PATCH v2 05/38] memory: mvebu-devbus: use ARMADA_ prefix in defines   Jason Cooper
• [PATCH v2 10/10] ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC   Jason Cooper
• [PATCH] ARM: mvebu: refine which files are build in mach-mvebu   Jason Cooper
• [PATCH RESEND 3/3] irqchip: orion: reverse irq handling priority   Jason Cooper
• [PATCH 93/97] ARM: l2c: convert mvebu to generic l2c initialisation   Jason Cooper
• [GIT PULL] ARM: mvebu: fixes for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu: DT fixes for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu: pci/mbus fixes for v3.15   Jason Cooper
• [PATCH v2 05/38] memory: mvebu-devbus: use ARMADA_ prefix in defines   Jason Cooper
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Jason Cooper
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Jason Cooper
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Jason Cooper
• [PATCH v4 0/6] Add STiH407 SoC and reference board support   Maxime Coquelin
• [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Alexandre Courbot
• [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level   Alexandre Courbot
• [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level   Alexandre Courbot
• [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures   Alexandre Courbot
• [PATCH 1/7] gpiolib: gpiolib-of: Implement device tree gpio-names based lookup   Alexandre Courbot
• [PATCH] mmc: mmci: switch the driver to using gpio descriptors   Alexandre Courbot
• [PATCH] ARM: integrator: add MMCI device to IM-PD1   Alexandre Courbot
• [PATCH 1/7] gpiolib: gpiolib-of: Implement device tree gpio-names based lookup   Alexandre Courbot
• [PATCH 1/7] gpiolib: gpiolib-of: Implement device tree gpio-names based lookup   Alexandre Courbot
• [PATCH] ARM: trusted_foundations: only set setup_max_cpus if SMP set   Alexandre Courbot
• randconfig failures - MMC + trusted foundations   Alexandre Courbot
• [PATCH RFC] ARM: dts: am335x: update USB DT references   Benoit Cousson
• [PATCH RFC] ARM: dts: am335x: update USB DT references   Benoit Cousson
• [PATCH RFC] ARM: dts: am335x: update USB DT references   Benoit Cousson
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Christopher Covington
• The Alphabet (or, the sorting of Kconfig symbols)   Christopher Covington
• [PATCH v6 2/5] ARM: Add Krait L2 register accessor functions   Christopher Covington
• Change of TEXT_OFFSET for multi_v7_defconfig   Christopher Covington
• Change of TEXT_OFFSET for multi_v7_defconfig   Christopher Covington
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Christopher Covington
• Change of TEXT_OFFSET for multi_v7_defconfig   Christopher Covington
• Change of TEXT_OFFSET for multi_v7_defconfig   Christopher Covington
• [PATCH 0/4] Introduce drivers/soc and add QCOM GSBI driver   Christopher Covington
• [PATCH 4/8] tty/serial: add generic serial earlycon   Alan Cox
• [PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure   Sam Creasey
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Peter Crosthwaite
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Peter Crosthwaite
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Peter Crosthwaite
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Peter Crosthwaite
• [PATCH v2 1/7] drm/exynos: add super device support   Inki Dae
• [PATCH v2 1/7] drm/exynos: add super device support   Inki Dae
• [PATCH v2 1/7] drm/exynos: add super device support   Inki Dae
• [PATCH v2 1/7] drm/exynos: add super device support   Inki Dae
• [PATCH v2 1/7] drm/exynos: add super device support   Inki Dae
• [PATCH v8 0/3] Exynos 5410 support   Tarek Dakhran
• [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tarek Dakhran
• [PATCH v8 2/3] clk: exynos5410: register clocks using common clock framework   Tarek Dakhran
• [PATCH v8 3/3] ARM: dts: Add initial device tree support for EXYNOS5410   Tarek Dakhran
• [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tarek Dakhran
• [PATCH v8 3/3] ARM: dts: Add initial device tree support for EXYNOS5410   Tarek Dakhran
• [PATCH v7 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Christoffer Dall
• [PATCH] ARM: KVM: Handle IPA unmapping on memory region deletion   Christoffer Dall
• [PATCH] ARM: KVM: disable KVM in Kconfig on big-endian systems   Christoffer Dall
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Christoffer Dall
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Christoffer Dall
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Christoffer Dall
• [PATCH v10 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Christoffer Dall
• [PATCH v10 05/12] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Christoffer Dall
• [PATCH v10 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Christoffer Dall
• [RFC v2] ARM VM System Specification   Christoffer Dall
• [PATCH v11 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Christoffer Dall
• [PATCH v11 00/12] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Christoffer Dall
• [GIT PULL] KVM/ARM Fixes for 3.15-rc4   Christoffer Dall
• [PATCH 1/5] ARM: KVM: disable KVM in Kconfig on big-endian systems   Christoffer Dall
• [PATCH 2/5] arm: KVM: fix possible misalignment of PGDs and bounce page   Christoffer Dall
• [PATCH 3/5] KVM: ARM: vgic: Fix sgi dispatch problem   Christoffer Dall
• [PATCH 4/5] KVM: arm/arm64: vgic: fix GICD_ICFGR register accesses   Christoffer Dall
• [PATCH 5/5] KVM: ARM: vgic: Fix the overlap check action about setting the GICD & GICC base address.   Christoffer Dall
• [PATCH v11 00/12] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Christoffer Dall
• [GIT PULL] Fourth Round of Renesas ARM Based SoC DT Updates for v3.15   Magnus Damm
• [GIT PULL] Fourth Round of Renesas ARM Based SoC DT Updates for v3.15   Magnus Damm
• [PATCH] ARM: shmobile: r8a7791: Add EHCI MSTP clock   Magnus Damm
• [PATCH v2 0/2] Add PCI USB DT support for R8A7790/Lager reference board   Magnus Damm
• [PATCH v2 0/2] Add PCI USB DT support for R8A7790/Lager reference board   Magnus Damm
• [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY   Magnus Damm
• [PATCH] ARM: shmobile: Enable USB [EO]HCI HCD support in shmobile_defconfig   Magnus Damm
• [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY   Magnus Damm
• [PATCH v4 05/11] ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console   Magnus Damm
• [PATCH v4 00/11] CCF support for Renesas r7s72100   Magnus Damm
• [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices   Magnus Damm
• [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices   Magnus Damm
• [PATCH v2] ARM: mm: support big-endian page tables   Will Deacon
• [PATCH v9 1/2] ARM: avoid tracers in soft_restart   Will Deacon
• [PATCH 2/3] ARM : kdump : add arch_crash_save_vmcoreinfo   Will Deacon
• [PATCH] arm64: Flush the process's mm context TLB entries when switching   Will Deacon
• [PATCH] ARM: errata: Fix the workaround for erratum 764369   Will Deacon
• [PATCH] arm64:kconfig: make default for CONFIG_COMPAT   Will Deacon
• [PATCH] arm64:init: Move of_clk_init to time_init   Will Deacon
• [PULL] fix for ARM SMMU driver   Will Deacon
• [PATCH 0/2] ARM SMMU fixes   Will Deacon
• [PATCH 0/3] ARM: implement workaround for Cortex-A9/PL310/PCIe deadlock   Will Deacon
• [PATCH 0/3] ARM: PCI: implement virtual PCI host controller   Will Deacon
• [PATCH 2/3] ARM : kdump : add arch_crash_save_vmcoreinfo   Will Deacon
• [PATCH] arm64: Flush the process's mm context TLB entries when switching   Will Deacon
• [PATCH v2] ARM: perf: save/restore pmu registers in pm notifier   Will Deacon
• [PATCH v2] ARM: perf: save/restore pmu registers in pm notifier   Will Deacon
• [PATCH v2] ARM: perf: save/restore pmu registers in pm notifier   Will Deacon
• [PATCH 0/3] ARM: PCI: implement virtual PCI host controller   Will Deacon
• [GIT PULL] iommu/arm-smmu: fixes for 3.15   Will Deacon
• [PATCH] Fix for the arm64 kern_addr_valid() function   Will Deacon
• [PATCH] arm64: initialize spinlock for init_mm's context   Will Deacon
• [PATCH_v8 2/2] arm64: audit: Add audit hook in syscall_trace_enter/exit()   Will Deacon
• [PATCH v2] arm64: initialize spinlock for init_mm's context   Will Deacon
• [PATCH v5 2/4] arm64: split syscall_trace() into separate functions for enter/exit   Will Deacon
• [PATCH v5 4/4] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h   Will Deacon
• [PATCH v7 3/7] ftrace: Add arm64 support to recordmcount   Will Deacon
• [PATCH v7 4/7] arm64: Add ftrace support   Will Deacon
• [PATCH v7 5/7] arm64: ftrace: Add dynamic ftrace support   Will Deacon
• [PATCH v7 6/7] arm64: ftrace: Add CALLER_ADDRx macros   Will Deacon
• [PATCH 0/3] ARM: PCI: implement virtual PCI host controller   Will Deacon
• [PATCH 0/2] ARM SMMU fixes   Will Deacon
• [PATCH] ARM: mcs lock: implement wfe-based polling for MCS locking   Will Deacon
• [PATCH] ARM: rwsem: use asm-generic rwsem implementation   Will Deacon
• [PATCH] arm64: debug: remove noisy, pointless warning   Will Deacon
• [PATCH] arm: dma-mapping: Fix mapping size value   Will Deacon
• [PATCH] ARM: fix string functions on !MMU   Will Deacon
• [PATCH] ARM64: disable DCACHE_WORD_ACCESS in big endian case   Will Deacon
• [RFC][PATCH] arm64: Add atomic pool for dma mapping   Will Deacon
• [PATCH v3] arm64: enable EDAC on arm64   Will Deacon
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Will Deacon
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Will Deacon
• [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64   Will Deacon
• [PATCH 2/3] arm64: Treat handle_arch_irq as a function pointer   Will Deacon
• [PATCH 0/9] Renesas ipmmu-vmsa: Miscellaneous cleanups and fixes   Will Deacon
• arm64: default dma_ops is set to coherent_dma_ops results into DMA FAILURE   Will Deacon
• [PATCH v3] arm64: enable EDAC on arm64   Will Deacon
• arm64: default dma_ops is set to coherent_dma_ops results into DMA FAILURE   Will Deacon
• [PATCH v3] arm64: enable EDAC on arm64   Will Deacon
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Will Deacon
• [PATCH] arm64: Make default dma_ops to be noncoherent   Will Deacon
• [PATCH] ARM64: disable DCACHE_WORD_ACCESS in big endian case   Will Deacon
• [Question] ARM/ARM64: Ticket Spinlock With GENERIC_BREAKLOCK   Will Deacon
• [PATCH v3] ARM: mm: support big-endian page tables   Will Deacon
• [PATCH] ARM: head: fix virt/phys patching for big-endian systems   Will Deacon
• [PATCH] ARM64: disable DCACHE_WORD_ACCESS in big endian case   Will Deacon
• [PATCH] ARM: head: fix virt/phys patching for big-endian systems   Will Deacon
• [PATCH v3] arm64: enable EDAC on arm64   Will Deacon
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Will Deacon
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Will Deacon
• [PATCH v6 2/6] ARM: allow user access to arch timer virtual counter   Will Deacon
• [PATCH v6 2/6] ARM: allow user access to arch timer virtual counter   Will Deacon
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Will Deacon
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Will Deacon
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Will Deacon
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Will Deacon
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Will Deacon
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Will Deacon
• [PATCH v3 7/7] ARM: dma: use phys_addr_t in __dma_page_[cpu_to_dev/dev_to_cpu]   Will Deacon
• [PATCH] ARM: fix string functions on !MMU   Will Deacon
• [PATCH] ARM: KVM: disable KVM in Kconfig on big-endian systems   Will Deacon
• [RFC PATCH] arm64: make bitops 32-bit tolerant   Will Deacon
• [PATCH] ARM: fix string functions on !MMU   Will Deacon
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Will Deacon
• [RFC PATCH v5 02/11] ARM SMMU: Add capability IOMMU_CAP_DMA_EXEC   Will Deacon
• ARM: mm: Could I change module space size or place modules in vmalloc area?   Will Deacon
• ARM: mm: Could I change module space size or place modules in vmalloc area?   Will Deacon
• [PATCH] Fix for the arm64 kern_addr_valid() function   Will Deacon
• [RFC PATCH] sched_clock: also call register_current_timer_delay() if possible   Will Deacon
• [PATCH 0/3] Make kexec work with CONFIG_DEBUG_RODATA enabled   Will Deacon
• [RFC PATCH] sched_clock: also call register_current_timer_delay() if possible   Will Deacon
• [PATCH] arm64: xchg: prevent warning if return value is unused   Will Deacon
• [PATCH] Input: w90p910_ts - depend on ARCH_W90X900   Jean Delvare
• [PATCH] video: exynos: Add a dependency to the menu   Jean Delvare
• [PATCH] tty/serial: atmel_serial: Fix device tree documentation   Ludovic Desroches
• [PATCH] tty/serial: atmel_serial: Fix device tree documentation   Ludovic Desroches
• [PATCH 1/4] pinctrl: tegra: remove redundant data table fields   Laxman Dewangan
• [PATCH 2/4] pinctrl: tegra: remove fsafe from data tables   Laxman Dewangan
• [PATCH 3/4] pinctrl: tegra: reduce size of data table fields   Laxman Dewangan
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Ben Dooks
• [GIT PULL v2] ARM: probes: big-endian support   Ben Dooks
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Ben Dooks
• mach header files   Ben Dooks
• Invitation request   Ben Dooks
• [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver   Ben Dooks
• [PATCH v2 0/4] net: Add APM X-Gene SoC Ethernet driver support   Ben Dooks
• [PATCH v2 0/4] net: Add APM X-Gene SoC Ethernet driver support   Ben Dooks
• [PATCH v2 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.   Ben Dooks
• Renesas clock clk-mstp updates for clock-indices   Ben Dooks
• Renesas clock clk-mstp updates for clock-indices   Ben Dooks
• [PATCH] clk: shmobile: clk-mstp: change to using clock-indices   Ben Dooks
• [PATCH/RFC 3/4] of/clk: Register clocks suitable for Runtime PM with the PM core   Ben Dooks
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Hiroshi Doyu
• [PATCH 0/7] ARM: Exynos: PMU cleanup and refactoring for using DT   Pankaj Dubey
• [PATCH 01/10] ARM: EXYNOS: Cleanup "mach-exynos/common.h" file   Pankaj Dubey
• [PATCH 02/10] ARM: EXYNOS: Correct file path in comment message   Pankaj Dubey
• [PATCH 03/10] ARM: EXYNOS: Move SYSREG definition into sys-reg specific file   Pankaj Dubey
• [PATCH 04/10] ARM: EXYNOS: Remove regs-pmu.h file dependency from pm_domain   Pankaj Dubey
• [PATCH 05/10] ARM: EXYNOS: Move "regs-pmu" header inclusion in common.h   Pankaj Dubey
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Pankaj Dubey
• [PATCH 07/10] ARM: EXYNOS: Refactored code for PMU register mapping via DT   Pankaj Dubey
• [PATCH 0/3] Add PMU node for Exynos4210, Exynos4412, Exynos4212   Pankaj Dubey
• [PATCH 1/3] ARM: dts: Add PMU reg node to exynos4210   Pankaj Dubey
• [PATCH 2/3] ARM: dts: Add PMU reg node to exynos4212 and exynos4412   Pankaj Dubey
• [PATCH 3/3] Documentation: update samsung pmu binding information for Exynos4210/4212/4412   Pankaj Dubey
• [RFC PATCH 0/2] Add support for Exynos PMU driver   Pankaj Dubey
• [RFC PATCH 1/2] drivers: mfd: Add support of exynos-pmu driver   Pankaj Dubey
• [RFC PATCH 2/2] ARM: EXYNOS: remove arch specific PMU implementation   Pankaj Dubey
• [PATCH 02/10] ARM: EXYNOS: Correct file path in comment message   Pankaj Dubey
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Pankaj Dubey
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Pankaj Dubey
• [PATCH 01/10] ARM: EXYNOS: Cleanup "mach-exynos/common.h" file   Pankaj Dubey
• [PATCH 05/10] ARM: EXYNOS: Move "regs-pmu" header inclusion in common.h   Pankaj Dubey
• [PATCH v3 0/4] Introduce new Kconfig for Samsung common clock   Pankaj Dubey
• [RFC PATCH 1/2] drivers: mfd: Add support of exynos-pmu driver   Pankaj Dubey
• [PATCH 03/10] ARM: EXYNOS: Move SYSREG definition into sys-reg specific file   Pankaj Dubey
• [PATCH 1/2] phy: samsung: add simple phys for exynos5250 SoC   Pankaj Dubey
• [PATCH 2/2] phy: samsung: add simple phys for exynos5420 SoC   Pankaj Dubey
• [RFC PATCH 1/2] drivers: mfd: Add support of exynos-pmu driver   Pankaj Dubey
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Pankaj Dubey
• [PATCH 1/3] ARM: dts: Add PMU reg node to exynos4210   Pankaj Dubey
• [PATCH v2 0/5] Add PMU node for Exynos SoCs   Pankaj Dubey
• [PATCH v2 1/5] ARM: dts: Add syscon handle in pmu node for exynos5250   Pankaj Dubey
• [PATCH v2 2/5] ARM: dts: Add PMU node to exynos4210   Pankaj Dubey
• [PATCH v2 3/5] ARM: dts: Add PMU node to exynos4212 and exynos4412   Pankaj Dubey
• [PATCH v2 4/5] arm: dts: Add syscon handle in pmu node for exynos5420   Pankaj Dubey
• [PATCH v2 5/5] Documentation: update samsung pmu binding information   Pankaj Dubey
• [PATCH v2 00/10] ARM: Exynos: PMU cleanup and refactoring for using DT   Pankaj Dubey
• [PATCH v2 01/10] ARM: EXYNOS: Make exynos machine_ops as static   Pankaj Dubey
• [PATCH v2 02/10] ARM: EXYNOS: Cleanup "mach-exynos/common.h" file   Pankaj Dubey
• [PATCH v2 03/10] ARM: EXYNOS: Move SYSREG definition into sys-reg specific file.   Pankaj Dubey
• [PATCH v2 04/10] ARM: EXYNOS: Remove file path from comment section   Pankaj Dubey
• [PATCH v2 05/10] ARM: EXYNOS: Remove regs-pmu.h header dependency from pm_domain   Pankaj Dubey
• [PATCH v2 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Pankaj Dubey
• [PATCH v2 07/10] ARM: EXYNOS: Remove "linux/bug.h" from pmu.c   Pankaj Dubey
• [PATCH v2 08/10] ARM: EXYNOS: Refactored code for using PMU address via DT   Pankaj Dubey
• [PATCH v2 09/10] ARM: EXYNOS: Move "mach/map.h" inclusion from regs-pmu.h to platsmp.c   Pankaj Dubey
• [PATCH v2 10/10] ARM: EXYNOS: Add device tree based initialization support for PMU.   Pankaj Dubey
• [RFC PATCH v2 0/3] Add support for Exynos PMU driver   Pankaj Dubey
• [RFC PATCH v2 1/3] ARM: EXYNOS: Move PMU specific definitions from common.h   Pankaj Dubey
• [RFC PATCH v2 2/3] ARM: EXYNOS: Move pmu specific header files under "linux/mfd/samsung"   Pankaj Dubey
• [RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Pankaj Dubey
• [PATCH v2 00/10] ARM: Exynos: PMU cleanup and refactoring for using DT   Pankaj Dubey
• [PATCH 1/4] ARM: dts: exynos4: add PMU syscon node   Pankaj Dubey
• [PATCH v2 08/10] ARM: EXYNOS: Refactored code for using PMU address via DT   Pankaj Dubey
• [PATCH v2 05/10] ARM: EXYNOS: Remove regs-pmu.h header dependency from pm_domain   Pankaj Dubey
• [PATCH v2 10/10] ARM: EXYNOS: Add device tree based initialization support for PMU.   Pankaj Dubey
• [PATCH v2 01/10] ARM: EXYNOS: Make exynos machine_ops as static   Pankaj Dubey
• [PATCH v2 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Pankaj Dubey
• [PATCH v2 1/5] ARM: dts: Add syscon handle in pmu node for exynos5250   Pankaj Dubey
• [RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Pankaj Dubey
• [RESUBMIT RFC PATCH v2 0/3] Add support for Exynos PMU driver   Pankaj Dubey
• [RESUBMIT RFC PATCH v2 1/3] ARM: EXYNOS: Move PMU specific definitions from common.h   Pankaj Dubey
• [RESUBMIT RFC PATCH v2 2/3] ARM: EXYNOS: Move pmu specific header files under "linux/mfd/samsung"   Pankaj Dubey
• [RESUBMIT RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Pankaj Dubey
• [RESUBMIT RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Pankaj Dubey
• [RESUBMIT RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Pankaj Dubey
• [PATCH v3 00/12] ARM: Exynos: PMU cleanup and refactoring for using DT   Pankaj Dubey
• [PATCH v3 01/12] ARM: EXYNOS: Make exynos machine_ops as static   Pankaj Dubey
• [PATCH v3 02/12] ARM: EXYNOS: Move cpufreq and cpuidle device registration to init_machine   Pankaj Dubey
• [PATCH v3 03/12] ARM: EXYNOS: Cleanup "mach-exynos/common.h" file   Pankaj Dubey
• [PATCH v3 04/12] ARM: EXYNOS: Move SYSREG definition into sys-reg specific file.   Pankaj Dubey
• [PATCH v3 05/12] ARM: EXYNOS: Remove file path from comment section   Pankaj Dubey
• [PATCH v3 06/12] ARM: EXYNOS: Remove regs-pmu.h header dependency from pm_domain   Pankaj Dubey
• [PATCH v3 07/12] ARM: EXYNOS: Add support for mapping PMU base address via DT   Pankaj Dubey
• [PATCH v3 08/12] ARM: EXYNOS: Remove "linux/bug.h" from pmu.c   Pankaj Dubey
• [PATCH v3 09/12] ARM: EXYNOS: Refactored code for using PMU address via DT   Pankaj Dubey
• [PATCH v3 10/12] ARM: EXYNOS: Move "mach/map.h" inclusion from regs-pmu.h to platsmp.c   Pankaj Dubey
• [PATCH v3 11/12] ARM: EXYNOS: Add platform driver support for Exynos PMU.   Pankaj Dubey
• [PATCH v3 12/12] ARM: EXYNOS: Move PMU specific definitions from common.h   Pankaj Dubey
• [PATCH v3 01/12] ARM: EXYNOS: Make exynos machine_ops as static   Pankaj Dubey
• [PATCH v3 11/12] ARM: EXYNOS: Add platform driver support for Exynos PMU.   Pankaj Dubey
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Liviu Dudau
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Liviu Dudau
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Liviu Dudau
• [PATCH v7 5/6] pci: Export find_pci_host_bridge() function.   Liviu Dudau
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Liviu Dudau
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Liviu Dudau
• [PATCH v7 3/3] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [PATCH v7 6/6] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Liviu Dudau
• [PATCH v5 2/4] arm64: dts: APM X-Gene PCIe device tree nodes   Liviu Dudau
• [PATCH v5 2/4] arm64: dts: APM X-Gene PCIe device tree nodes   Liviu Dudau
• [PATCH v7 0/3] Add support for PCI in AArch64   Liviu Dudau
• [PATCH v7 0/3] Add support for PCI in AArch64   Liviu Dudau
• [PATCH v5 2/4] arm64: dts: APM X-Gene PCIe device tree nodes   Liviu Dudau
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Liviu Dudau
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Liviu Dudau
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Liviu Dudau
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Liviu Dudau
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Liviu Dudau
• [PATCH v1] dma: imx-sdma: add support for sdma memory copy   Randy Dunlap
• [PATCH_v8 0/2] arm64: Add audit support   Don Dutile
• [PATCH_v8 0/2] arm64: Add audit support   Don Dutile
• [PATCH] Fix for the arm64 kern_addr_valid() function   Don Dutile
• [PATCH] ARM: dts: Add support for OMAP4 Variscite OM44 family   Joachim Eastwood
• [PATCH 0/4] Support for Variscite OM44 modules and boards   Joachim Eastwood
• [PATCH 1/4] ARM: dts: Add support for OMAP4 Variscite OM44 family   Joachim Eastwood
• [PATCH 2/4] ARM: dts: Add support for OMAP4 VAR-DVK-OM44   Joachim Eastwood
• [PATCH 3/4] ARM: dts: Add VAR-SOM-OM44 WLAN nodes   Joachim Eastwood
• [PATCH 4/4] ARM: OMAP2+: Use pdata quirks for wl12xx on VAR-STK/DVK-OM44   Joachim Eastwood
• [PATCH 1/4] ARM: dts: Add support for OMAP4 Variscite OM44 family   Joachim Eastwood
• [PATCH 1/4] ARM: dts: Add support for OMAP4 Variscite OM44 family   Joachim Eastwood
• [PATCH 4/4] ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp   Joachim Eastwood
• [PATCH 1/4] ARM: dts: Add support for OMAP4 Variscite OM44 family   Joachim Eastwood
• [REGRESSION, BISECTED] mvneta broken in 3.14 on RN2120, RN102 and RN104 after e3a8786c10e7   Arnaud Ebalard
• [REGRESSION, BISECTED] mvneta broken in 3.14 on RN2120, RN102 and RN104 after e3a8786c10e7   Arnaud Ebalard
• [PATCH 0/3] net: mvneta: fix usage as a module, and support QSGMII properly   Arnaud Ebalard
• mach header files   Phil Edworthy
• mach header files   Phil Edworthy
• mach header files   Phil Edworthy
• [PATCH v7 00/10] R-Car Gen2 PCIe host driver   Phil Edworthy
• [PATCH v7 00/10] R-Car Gen2 PCIe host driver   Phil Edworthy
• mach header files   Phil Edworthy
• mach header files   Phil Edworthy
• mach header files   Phil Edworthy
• mach header files   Phil Edworthy
• mach header files   Phil Edworthy
• mach header files   Phil Edworthy
• [PATCH v7 01/10] PCI: host: rcar: Add Renesas R-Car PCIe driver   Phil Edworthy
• [PATCH v7 01/10] PCI: host: rcar: Add Renesas R-Car PCIe driver   Phil Edworthy
• [PATCH v7 01/10] PCI: host: rcar: Add Renesas R-Car PCIe driver   Phil Edworthy
• [PATCH v4 0/5] rework sched_domain topology description   Dietmar Eggemann
• [PATCH v4 5/5] sched: ARM: create a dedicated scheduler topology table   Dietmar Eggemann
• [PATCH v4 5/5] sched: ARM: create a dedicated scheduler topology table   Dietmar Eggemann
• [PATCH v4 5/5] sched: ARM: create a dedicated scheduler topology table   Dietmar Eggemann
• [PATCH v4 5/5] sched: ARM: create a dedicated scheduler topology table   Dietmar Eggemann
• [PATCH v3 0/7] clk: bcm281xx: updates for 3.15   Alex Elder
• [PATCH v3 1/7] clk: bcm281xx: warn if ccu_wait_bit() fails   Alex Elder
• [PATCH v3 2/7] clk: bcm281xx: use init_data.name for clock name   Alex Elder
• [PATCH v3 3/7] clk: bcm281xx: change some symbol names   Alex Elder
• [PATCH v3 4/7] clk: bcm281xx: initialize CCU structures statically   Alex Elder
• [PATCH v3 5/7] clk: bcm281xx: define CCU clock data statically   Alex Elder
• [PATCH v3 6/7] clk: bcm281xx: add clock policy support   Alex Elder
• [PATCH v3 7/7] clk: bcm281xx: add clock hysteresis support   Alex Elder
• [PATCH v3 10/10] clk: bcm281xx: add clock hysteresis support   Alex Elder
• [RFC PATCH 2/7] ARM: SMP: generic SMP spin-table method routines   Alex Elder
• [PATCH RESEND 0/5] clk: bcm21664: add common clock support   Alex Elder
• [PATCH RESEND 1/5] clk: bcm281xx: move compatible string definitions   Alex Elder
• [PATCH RESEND 2/5] ARM: dts: revise kona clock binding document   Alex Elder
• [PATCH RESEND 3/5] ARM: dts: define clock binding for bcm21664   Alex Elder
• [PATCH RESEND 4/5] clk: bcm21664: use common clock framework   Alex Elder
• [PATCH RESEND 5/5] ARM: dts: use real clocks for bcm21664   Alex Elder
• [PATCH] mach-bcm: clean up config and build targets   Alex Elder
• [PATCH] mach-bcm: clean up config and build targets   Alex Elder
• [PATCH v2] mach-bcm: clean up config and build targets   Alex Elder
• [PATCH v3] mach-bcm: clean up config and build targets   Alex Elder
• [PATCH 0/5] ARM: SMP: support Broadcom mobile SoCs   Alex Elder
• [PATCH 1/5] ARM: introduce CPU_METHOD_OF_DECLARE_SETUP()   Alex Elder
• [PATCH 2/5] ARM: add SMP support for Broadcom mobile SoCs   Alex Elder
• [PATCH 3/5] ARM: configs: enable SMP in bcm_defconfig   Alex Elder
• [PATCH 4/5] ARM: dts: enable SMP support for bcm28155   Alex Elder
• [PATCH 5/5] ARM: dts: enable SMP support for bcm21664   Alex Elder
• [PATCH 2/5] ARM: add SMP support for Broadcom mobile SoCs   Alex Elder
• [PATCH 3/5] ARM: configs: enable SMP in bcm_defconfig   Alex Elder
• [PATCH 2/5] ARM: add SMP support for Broadcom mobile SoCs   Alex Elder
• [PATCH 2/5] ARM: add SMP support for Broadcom mobile SoCs   Alex Elder
• [RFC PATCH 0/7] ARM: SMP: common "pen" secondary release method   Alex Elder
• drivers/clk/bcm/clk-bcm281xx.c breaks on GCC 4.6.4 (and earlier)   Alex Elder
• drivers/clk/bcm/clk-bcm281xx.c breaks on GCC 4.6.4 (and earlier)   Alex Elder
• [GIT PULL] clk: bcm281xx: urgent fix for older compilers   Alex Elder
• [PATCH v4 0/7] clk: bcm281xx: updates   Alex Elder
• [PATCH v4 1/7] clk: bcm281xx: warn if ccu_wait_bit() fails   Alex Elder
• [PATCH v4 2/7] clk: bcm281xx: use init_data.name for clock name   Alex Elder
• [PATCH v4 3/7] clk: bcm281xx: change some symbol names   Alex Elder
• [PATCH v4 4/7] clk: bcm281xx: initialize CCU structures statically   Alex Elder
• [PATCH v4 5/7] clk: bcm281xx: define CCU clock data statically   Alex Elder
• [PATCH v4 6/7] clk: bcm281xx: add clock policy support   Alex Elder
• [PATCH v4 7/7] clk: bcm281xx: add clock hysteresis support   Alex Elder
• [PATCH v2 0/5] clk: bcm21664: add common clock support   Alex Elder
• [PATCH v2 1/5] clk: bcm281xx: move compatible string definitions   Alex Elder
• [PATCH v2 2/5] ARM: dts: revise kona clock binding document   Alex Elder
• [PATCH v2 3/5] ARM: dts: define clock binding for bcm21664   Alex Elder
• [PATCH v2 4/5] clk: bcm21664: use common clock framework   Alex Elder
• [PATCH v2 5/5] ARM: dts: use real clocks for bcm21664   Alex Elder
• [RFC PATCH RESEND] ARM: spear: send SGI to trigger secondary CPU start   Alex Elder
• [PATCH RESEND] ARM: spear: add __init to spear_clocksource_init()   Alex Elder
• [PATCH 2/5] ARM: add SMP support for Broadcom mobile SoCs   Alex Elder
• [PATCH v4] mach-bcm: clean up config and build targets   Alex Elder
• [PATCH v2 0/5] ARM: SMP: support Broadcom mobile SoCs   Alex Elder
• [PATCH v2 1/5] ARM: introduce CPU_METHOD_OF_DECLARE_SETUP()   Alex Elder
• [PATCH v2 2/5] ARM: add SMP support for Broadcom mobile SoCs   Alex Elder
• [PATCH v2 3/5] ARM: configs: enable SMP in bcm_defconfig   Alex Elder
• [PATCH v2 4/5] ARM: dts: enable SMP support for bcm28155   Alex Elder
• [PATCH v2 5/5] ARM: dts: enable SMP support for bcm21664   Alex Elder
• [PATCH 00/10] ARM: bcm: SCM and L2 cache code cleanup   Alex Elder
• [PATCH 01/10] ARM: bcm: use memory accessors for ioremapped area   Alex Elder
• [PATCH 02/10] ARM: bcm: err, don't BUG() on SMC init failures   Alex Elder
• [PATCH 03/10] ARM: bcm: clean up SMC code   Alex Elder
• [PATCH 04/10] ARM: bcm: have bcm_kona_smc() return request result   Alex Elder
• [PATCH 05/10] ARM: bcm: don't special-case CPU 0 in bcm_kona_smc()   Alex Elder
• [PATCH 06/10] ARM: bcm: config option for l2 cache support   Alex Elder
• [PATCH 07/10] ARM: bcm: tidy up a few includes   Alex Elder
• [PATCH 08/10] ARM: bcm: use inline assembly for "smc" request   Alex Elder
• [PATCH 09/10] ARM: bcm: rewrite commentary for bcm_kona_do_smc()   Alex Elder
• [PATCH 10/10] ARM: bcm: rename "kona.h" and "kona.c"   Alex Elder
• [PATCH 07/10] ARM: bcm: tidy up a few includes   Alex Elder
• [PATCH v4 RESEND 0/7] clk: bcm281xx: updates   Alex Elder
• [PATCH v4 RESEND 1/7] clk: bcm281xx: warn if ccu_wait_bit() fails   Alex Elder
• [PATCH v4 RESEND 2/7] clk: bcm281xx: use init_data.name for clock name   Alex Elder
• [PATCH v4 RESEND 3/7] clk: bcm281xx: change some symbol names   Alex Elder
• [PATCH v4 RESEND 4/7] clk: bcm281xx: initialize CCU structures statically   Alex Elder
• [PATCH v4 RESEND 5/7] clk: bcm281xx: define CCU clock data statically   Alex Elder
• [PATCH v4 RESEND 6/7] clk: bcm281xx: add clock policy support   Alex Elder
• [PATCH v4 RESEND 7/7] clk: bcm281xx: add clock hysteresis support   Alex Elder
• [PATCH v2 RESEND 0/5] clk: bcm21664: add common clock support   Alex Elder
• [PATCH v2 RESEND 1/5] clk: bcm281xx: move compatible string definitions   Alex Elder
• [PATCH v2 RESEND 2/5] ARM: dts: revise kona clock binding document   Alex Elder
• [PATCH v2 RESEND 3/5] ARM: dts: define clock binding for bcm21664   Alex Elder
• [PATCH v2 RESEND 4/5] clk: bcm21664: use common clock framework   Alex Elder
• [PATCH v2 RESEND 5/5] ARM: dts: use real clocks for bcm21664   Alex Elder
• [PATCH v2 00/10] ARM: bcm: SCM and L2 cache code cleanup   Alex Elder
• [PATCH v2 01/10] ARM: bcm: use memory accessors for ioremapped area   Alex Elder
• [PATCH v2 02/10] ARM: bcm: err, don't BUG() on SMC init failures   Alex Elder
• [PATCH v2 03/10] ARM: bcm: clean up SMC code   Alex Elder
• [PATCH v2 04/10] ARM: bcm: have bcm_kona_smc() return request result   Alex Elder
• [PATCH v2 05/10] ARM: bcm: don't special-case CPU 0 in bcm_kona_smc()   Alex Elder
• [PATCH v2 06/10] ARM: bcm: config option for l2 cache support   Alex Elder
• [PATCH v2 07/10] ARM: bcm: tidy up a few includes   Alex Elder
• [PATCH v2 08/10] ARM: bcm: use inline assembly for "smc" request   Alex Elder
• [PATCH v2 09/10] ARM: bcm: rewrite commentary for bcm_kona_do_smc()   Alex Elder
• [PATCH v2 10/10] ARM: bcm: rename "kona.h" and "kona.c"   Alex Elder
• [PATCH v2 RESEND 0/5] clk: bcm21664: add common clock support   Alex Elder
• dma_alloc_coherent and cache?   Lee Essen
• dma_alloc_coherent and cache?   Lee Essen
• dma_alloc_coherent and cache?   Lee Essen
• dma_alloc_coherent and cache?   Lee Essen
• [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range   Fabio Estevam
• [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration   Fabio Estevam
• [PATCH 3/3] ARM: dts: imx27-pdk: Pass the FEC pin configuration   Fabio Estevam
• mx27 running too slow   Fabio Estevam
• mx27 running too slow   Fabio Estevam
• [PATCH] ARM: imx: Remove mx51_babbage board file   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Select CONFIG_CRYPTO_DEV_MXS_DCP   Fabio Estevam
• [PATCH] arm: scoop: Remove unused variable   Fabio Estevam
• mx27 running too slow   Fabio Estevam
• mx27 running too slow   Fabio Estevam
• [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration   Fabio Estevam
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Fabio Estevam
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Fabio Estevam
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Fabio Estevam
• [PATCH v2 1/3] ARM: dts: imx27-pdk: Keep the dt nodes sorted   Fabio Estevam
• [PATCH v2 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration   Fabio Estevam
• [PATCH v2 3/3] ARM: dts: imx27-pdk: Pass the FEC pin configuration   Fabio Estevam
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Fabio Estevam
• Wrong SPI NOR model detected by mx6sl   Fabio Estevam
• Wrong SPI NOR model detected by mx6sl   Fabio Estevam
• Wrong SPI NOR model detected by mx6sl   Fabio Estevam
• Wrong SPI NOR model detected by mx6sl   Fabio Estevam
• [PATCH] ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11   Fabio Estevam
• Wrong SPI NOR model detected by mx6sl   Fabio Estevam
• [PATCH] ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11   Fabio Estevam
• [PATCH v3 1/3] ARM: dts: imx27-pdk: Keep the dt nodes sorted   Fabio Estevam
• [PATCH v3 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration   Fabio Estevam
• [PATCH v3 3/3] ARM: dts: imx27-pdk: Pass the FEC pin configuration   Fabio Estevam
• [PATCH v4 1/3] ARM: dts: imx27-pdk: Keep the dt nodes sorted   Fabio Estevam
• [PATCH v4 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration   Fabio Estevam
• [PATCH v4 3/3] ARM: dts: imx27-pdk: Pass the FEC pin configuration   Fabio Estevam
• [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume   Fabio Estevam
• [PATCH] ARM: imx: Remove mx51_babbage board file   Fabio Estevam
• [RFC] ARM: dts: imx27-pdk: Add PMIC support   Fabio Estevam
• [RFC] ARM: dts: imx27-pdk: Add PMIC support   Fabio Estevam
• [PATCH] ARM: dts: imx27-pdk: Add PMIC support   Fabio Estevam
• [PATCH] ARM: dts: imx27-pdk: Add PMIC support   Fabio Estevam
• USB OTG support on mx27pdk   Fabio Estevam
• USB OTG support on mx27pdk   Fabio Estevam
• [PATCH v2] ARM: dts: imx27-pdk: Add PMIC support   Fabio Estevam
• [PATCH v3] ARM: dts: imx27-pdk: Add PMIC support   Fabio Estevam
• [PATCH] ARM: dts: imx27-phytec-phycore-som: Move PMIC IRQ GPIO into a separate pin group   Fabio Estevam
• USB OTG support on mx27pdk   Fabio Estevam
• USB OTG support on mx27pdk   Fabio Estevam
• USB OTG support on mx27pdk   Fabio Estevam
• [PATCH 1/3] ARM: dts: imx27: Use the correct usb clock gate   Fabio Estevam
• [PATCH 2/3] ARM: dts: imx27: Place the usb phy nodes in the board dts files   Fabio Estevam
• [PATCH 3/3] ARM: dts: imx27-pdk: Add USB OTG support   Fabio Estevam
• [PATCH v2 1/3] ARM: dts: imx27: Use the correct usb clock gate   Fabio Estevam
• [PATCH v2 2/3] ARM: dts: imx27: Place the usb phy nodes in the board dts files   Fabio Estevam
• [PATCH v2 3/3] ARM: dts: imx27-pdk: Add USB OTG support   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx27-pdk: Add NAND support   Fabio Estevam
• [PATCH 2/2] ARM: dts: imx27-pdk: Add keypad support   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx27-pdk: Add NAND support   Fabio Estevam
• [PATCH v2 1/2] ARM: dts: imx27-pdk: Add NAND support   Fabio Estevam
• [PATCH v2 2/2] ARM: dts: imx27-pdk: Add keypad support   Fabio Estevam
• [PATCH v2] ARM: dts: imx6qdl-sabresd: Add HDMI support   Fabio Estevam
• USB OTG support on mx27pdk   Fabio Estevam
• [PATCH v3] ARM: dts: imx6qdl-sabresd: Add HDMI support   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-wandboard: Add HDMI support   Fabio Estevam
• [PATCH] ARM: dts: imx53-qsb-common: Add TVE support   Fabio Estevam
• [PATCH] ARM: dts: imx27-phytec-phycard-s-rdk: Remove 'regulator-always-on'   Fabio Estevam
• SD CRC error on mx27pdk   Fabio Estevam
• SD CRC error on mx27pdk   Fabio Estevam
• SD CRC error on mx27pdk   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-wandboard: Move FEC reset pin into the FEC pin group   Fabio Estevam
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Fabio Estevam
• [PATCH v2] ARM: dts: imx53-qsb-common: Add TVE support   Fabio Estevam
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Darren Etheridge
• [PATCH v3 0/7] Add ST Keyscan driver   Gabriel FERNANDEZ
• [PATCH v3 1/7] drivers: input: keyboard: st-keyscan: add keyscan driver   Gabriel FERNANDEZ
• [PATCH v3 2/7] ARM: STi: DT: add keyscan for stih415   Gabriel FERNANDEZ
• [PATCH v3 2/7] driver: reset: sti: add keyscan for stih415   Gabriel FERNANDEZ
• [PATCH v3 3/7] ARM: STi: DT: add keyscan for stih416   Gabriel FERNANDEZ
• [PATCH v3 3/7] driver: reset: sti: add keyscan for stih416   Gabriel FERNANDEZ
• [PATCH v3 4/7] ARM: STi: DT: add keyscan for stih415   Gabriel FERNANDEZ
• [PATCH v3 4/7] ARM: STi: DT: add keyscan for stih41x-b2000   Gabriel FERNANDEZ
• [PATCH v3 5/7] ARM: STi: DT: add keyscan for stih416   Gabriel FERNANDEZ
• [PATCH v3 5/7] ARM: multi_v7_defconfig: add ST Keyscan driver   Gabriel FERNANDEZ
• [PATCH v3 6/7] ARM: STi: DT: add keyscan for stih41x-b2000   Gabriel FERNANDEZ
• [PATCH v3 6/7] driver: reset: sti: add keyscan for stih415   Gabriel FERNANDEZ
• [PATCH v3 7/7] ARM: multi_v7_defconfig: add ST Keyscan driver   Gabriel FERNANDEZ
• [PATCH v3 7/7] driver: reset: sti: add keyscan for stih416   Gabriel FERNANDEZ
• [PATCH v4 0/7] Add ST Keyscan driver   Gabriel FERNANDEZ
• [PATCH v4 1/7] drivers: input: keyboard: st-keyscan: add keyscan driver   Gabriel FERNANDEZ
• [PATCH v4 2/7] driver: reset: sti: add keyscan for stih415   Gabriel FERNANDEZ
• [PATCH v4 3/7] driver: reset: sti: add keyscan for stih416   Gabriel FERNANDEZ
• [PATCH v4 4/7] ARM: STi: DT: add keyscan for stih415   Gabriel FERNANDEZ
• [PATCH v4 5/7] ARM: STi: DT: add keyscan for stih416   Gabriel FERNANDEZ
• [PATCH v4 6/7] ARM: STi: DT: add keyscan for stih41x-b2000   Gabriel FERNANDEZ
• [PATCH v4 7/7] ARM: multi_v7_defconfig: add ST Keyscan driver   Gabriel FERNANDEZ
• [ARM ATTEND] DT review process, old bindings deprecation   Florian Fainelli
• [PATCH 0/6] ARM: BCM63XX: add support for BCM63138 SoC   Florian Fainelli
• [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver   Florian Fainelli
• [PATCH 1/3] net: phy: add minimal support for QSGMII PHY   Florian Fainelli
• [PATCH v8 2/3] net: hisilicon: new hip04 MDIO driver   Florian Fainelli
• [PATCH RESEND 0/5] ARM: BCM63XX: add support for BCM63138 SoC   Florian Fainelli
• [PATCH RESEND 1/5] ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC   Florian Fainelli
• [PATCH RESEND 2/5] ARM: BCM63XX: add low-level UART debug support   Florian Fainelli
• [PATCH RESEND 3/5] ARM: BCM63XX: add BCM63138 minimal Device Tree   Florian Fainelli
• [PATCH RESEND 4/5] ARM: BCM63XX: add BCM963138DVT Reference platform DTS   Florian Fainelli
• [PATCH RESEND 5/5] MAINTAINERS: add entry for the Broadcom BCM63xx ARM SoCs   Florian Fainelli
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Florian Fainelli
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Florian Fainelli
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Joel Fernandes
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Joel Fernandes
• [PATCH v2 08/14] DMA: edma: Use different eventq for cyclic channels   Joel Fernandes
• [PATCH v2 10/14] dma: edma: Simplify direction configuration in edma_config_pset()   Joel Fernandes
• [PATCH v2 00/14] dma: edma: Fixes for cyclic (audio) operation   Joel Fernandes
• [PATCH v2 10/14] dma: edma: Simplify direction configuration in edma_config_pset()   Joel Fernandes
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Joel Fernandes
• [PATCH v2 03/14] dma: edma: Add support for DMA_PAUSE/RESUME operation   Joel Fernandes
• [PATCH v2 08/14] DMA: edma: Use different eventq for cyclic channels   Joel Fernandes
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Joel Fernandes
• [PATCH v3 00/10] dma: edma: Fixes for cyclic (audio) operation   Joel Fernandes
• [PATCH 0/9] dmtimer code clean-up first pass   Joel Fernandes
• [PATCH 1/9] ARM: OMAP: dmtimer: Remove setting of clk parent indirectly through platform hook   Joel Fernandes
• [PATCH 2/9] ARM: OMAP: dmtimer: Add comments on OMAP1 clock framework   Joel Fernandes
• [PATCH 3/9] ARM: OMAP: dmtimer: Add note to set parent from DT   Joel Fernandes
• [PATCH 4/9] ARM: OMAP: dmtimer: Add function to check if timer is running   Joel Fernandes
• [PATCH 5/9] ARM: OMAP1: dmtimer: Rewrite modify of IDLECT mask to use new is_running function   Joel Fernandes
• [PATCH 6/9] ARM: OMAP: dmtimer: Add a write_ctrl function to simplify bit setting   Joel Fernandes
• [PATCH 7/9] ARM: OMAP: dmtimer: Have __omap_dm_timer_load_start set ST bit in CTRL instead of caller   Joel Fernandes
• [PATCH 8/9] ARM: OMAP: dmtimer: Add function to check for timer availability   Joel Fernandes
• [PATCH 9/9] ARM: OMAP: dmtimer: Get rid of check for mem resource error   Joel Fernandes
• [PATCH] dmaengine: edma: No need save/restore interrupt flags during spin_lock in IRQ   Joel Fernandes
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Joel Fernandes
• [patch 3/6] dma: edma: Create private pset struct   Joel Fernandes
• [patch 1/6] dma: edma: Sanitize residue reporting   Joel Fernandes
• [patch 6/6] dma: edma: Provide granular accounting   Joel Fernandes
• [patch 5/6] edma: Make reading the position of active channels work   Joel Fernandes
• [patch 5/6] edma: Make reading the position of active channels work   Joel Fernandes
• [patch 6/6] dma: edma: Provide granular accounting   Joel Fernandes
• [patch 5/6] edma: Make reading the position of active channels work   Joel Fernandes
• [PATCH] dmaengine: edma: Add DMA memcpy support   Joel Fernandes
• [PATCH v3 00/10] dma: edma: Fixes for cyclic (audio) operation   Joel Fernandes
• [PATCH v2 2/7] of: introduce of_dma_get_range() helper   Joel Fernandes
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Joel Fernandes
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Joel Fernandes
• [PATCH v2] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Joel Fernandes
• [PATCH 0/8] OMAP2+ system timer cleanup series   Joel Fernandes
• [PATCH 1/8] ARM: OMAP2+: timer: Add a powerup function   Joel Fernandes
• [PATCH 2/8] ARM: OMAP2+: timer: Simplify clock event/source name setting   Joel Fernandes
• [PATCH 3/8] ARM: OMAP2+: timer: Add comment on timer clk parenting   Joel Fernandes
• [PATCH 4/8] ARM: OMAP2+: timer: Remove hwmod look-up dependency for DT-boot   Joel Fernandes
• [PATCH 5/8] ARM: OMAP2+: timer: Use of_clk_get for DT platforms   Joel Fernandes
• [PATCH 6/8] ARM: OMAP2+: timer: Fix error message to not use hwmod structure   Joel Fernandes
• [PATCH 7/8] ARM: OMAP2+: timer: Add fallback for of_clk_get   Joel Fernandes
• [PATCH 8/8] ARM: OMAP2+: timer: Add legacy code for old way of getting fclk   Joel Fernandes
• [PATCH 00/26] OMAP dmtimer prep series   Joel Fernandes
• [PATCH 01/26] ARM: OMAP: dmtimer: Remove setting of clk parent indirectly through platform hook   Joel Fernandes
• [PATCH 02/26] ARM: OMAP: dmtimer: Add comments on OMAP1 clock framework   Joel Fernandes
• [PATCH 03/26] ARM: OMAP: dmtimer: Add note to set parent from DT   Joel Fernandes
• [PATCH 04/26] ARM: OMAP: dmtimer: Add function to check if timer is running   Joel Fernandes
• [PATCH 05/26] ARM: OMAP1: dmtimer: Rewrite modify of IDLECT mask to use new is_running function   Joel Fernandes
• [PATCH 06/26] ARM: OMAP: dmtimer: Add a write_ctrl function to simplify bit setting   Joel Fernandes
• [PATCH 07/26] ARM: OMAP: dmtimer: Have __omap_dm_timer_load_start set ST bit in CTRL instead of caller   Joel Fernandes
• [PATCH 08/26] ARM: OMAP: dmtimer: Add function to check for timer availability   Joel Fernandes
• [PATCH 09/26] ARM: OMAP: dmtimer: Get rid of check for mem resource error   Joel Fernandes
• [PATCH 10/26] ARM: OMAP: dmtimer: Check return of pm_runtime_get_sync   Joel Fernandes
• [PATCH 11/26] ARM: OMAP2+: timer: Add a powerup function   Joel Fernandes
• [PATCH 12/26] ARM: OMAP2+: timer: Simplify clock event/source name setting   Joel Fernandes
• [PATCH 13/26] ARM: OMAP2+: timer: Add comment on timer clk parenting   Joel Fernandes
• [PATCH 14/26] ARM: OMAP2+: timer: Remove hwmod look-up dependency for DT-boot   Joel Fernandes
• [PATCH 15/26] ARM: OMAP2+: timer: Use of_clk_get for DT platforms   Joel Fernandes
• [PATCH 16/26] ARM: OMAP2+: timer: Fix error message to not use hwmod structure   Joel Fernandes
• [PATCH 17/26] ARM: OMAP2+: timer: Add fallback for of_clk_get   Joel Fernandes
• [PATCH 18/26] ARM: OMAP2+: timer: Add legacy code for old way of getting fclk   Joel Fernandes
• [PATCH 19/26] ARM: OMAP: dmtimer: Remove API __omap_dm_timer_load_start   Joel Fernandes
• [PATCH 20/26] ARM: OMAP: dmtimer: Fold back private stop function   Joel Fernandes
• [PATCH 21/26] ARM: OMAP: dmtimer: Add systimer flag to dmtimer structure   Joel Fernandes
• [PATCH 22/26] ARM: OMAP: dmtimer: Eliminate __omap_dm_timer_write_status function   Joel Fernandes
• [PATCH 23/26] ARM: OMAP: dmtimer: Eliminate __omap_dm_timer_read_counter function   Joel Fernandes
• [PATCH 24/26] ARM: OMAP: dmtimer: Move private functions into dmtimer core and export others   Joel Fernandes
• [PATCH 25/26] ARM: OMAP: dmtimer: Eliminate omap_dm_timer_int_enable function   Joel Fernandes
• [PATCH 26/26] ARM: OMAP: dmtimer: Use is_timer_available function in omap_dm_timer_trigger   Joel Fernandes
• [PATCH 00/10] ARM: OMAP: dts and HWMOD entries for crypto modules   Joel Fernandes
• [PATCH 01/10] ARM: OMAP: hwmod: Add SYSC offsets for AES IP   Joel Fernandes
• [PATCH 02/10] ARM: DRA7xx: hwmod: Add hwmod data for DES IP   Joel Fernandes
• [PATCH 03/10] ARM: DRA7xx: hwmod: Add hwmod data for AES IP   Joel Fernandes
• [PATCH 04/10] ARM: DRA7xx: Add hwmod entries for RNG module   Joel Fernandes
• [PATCH 05/10] ARM: OMAP4: hwmod: Add hwmod data for AES IP   Joel Fernandes
• [PATCH 06/10] ARM: OMAP4: hwmod: add hwmod data for DES IP   Joel Fernandes
• [PATCH 07/10] ARM: dts: DRA7: Add DT node for DES IP   Joel Fernandes
• [PATCH 08/10] ARM: dts: DRA7: Add DT node for AES IP   Joel Fernandes
• [PATCH 09/10] ARM: dts: OMAP4: clk: Add clk node for DES IP   Joel Fernandes
• [PATCH 10/10] ARM: dts: OMAP4: Add clock nodes for AES/DES nodes   Joel Fernandes
• [patch V2 5/6] edma: Make reading the position of active channels work   Joel Fernandes
• [PATCH 07/10] ARM: dts: DRA7: Add DT node for DES IP   Joel Fernandes
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Joel Fernandes
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Joel Fernandes
• [patch V2 0/6] dma: edma: Provide granular residue accounting   Joel Fernandes
• [PATCH 1/2] dmaengine: edma: Document variables used for residue accounting   Joel Fernandes
• [PATCH 2/2] dmaengine: edma: update DMA memcpy to use new param element   Joel Fernandes
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Joel Fernandes
• [PATCH] ARM: OMAP5: Redo THUMB mode switch on secondary CPU   Joel Fernandes
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Joel Fernandes
• [patch V2 0/6] dma: edma: Provide granular residue accounting   Joel Fernandes
• [patch V2 0/6] dma: edma: Provide granular residue accounting   Joel Fernandes
• [PATCH v3 0/7] Add ST Keyscan driver   Gabriel Fernandez
• [PATCH v4 1/7] drivers: input: keyboard: st-keyscan: add keyscan driver   Gabriel Fernandez
• [PATCH] pwm: atmel: set pwm_chip can_sleep flag   Nicolas Ferre
• [PATCH] pinctrl/at91: Fix mask creation in at91_gpio_dbg_show   Nicolas Ferre
• [PATCH v4 1/2] ASoC: sam9g20_wm8731: remove useless mach/gpio.h   Nicolas Ferre
• [PATCH v4 2/2] ARM: at91: localize GPIO header   Nicolas Ferre
• [PATCH v2] pinctrl/at91: Fix mask creation in at91_gpio_dbg_show   Nicolas Ferre
• [PATCH v2 02/11] clk: at91: update main clk documentation   Nicolas Ferre
• [PATCH v2 04/11] clk: at91: add slow clk documentation   Nicolas Ferre
• [PATCH v4 1/2] ASoC: sam9g20_wm8731: remove useless mach/gpio.h   Nicolas Ferre
• [PATCH 0/2] Add more peripherals to the sam9rlek   Nicolas Ferre
• [PATCH] ARM: at91: fix spi cs on sama5d3 Xplained board   Nicolas Ferre
• [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock   Nicolas Ferre
• [PATCH 0/3] ARM: at91: improve at91sam9m10g45ek support   Nicolas Ferre
• [PATCH 0/8] ARM: at91: sama5d3: enable sound support   Nicolas Ferre
• [PATCH 1/8] ARM: at91: sama5d3: add DMA property for SSC devices   Nicolas Ferre
• [PATCH 2/8] ARM: at91: sama5d3: disable sound by default   Nicolas Ferre
• [PATCH 3/8] ARM: at91: sama5d3: correct the sound compatible string   Nicolas Ferre
• [PATCH 4/8] ARM: at91: sama5d3: add the missing property   Nicolas Ferre
• [PATCH 5/8] ARM: at91: sama5d3: clock for ssc from rk pin   Nicolas Ferre
• [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator device node   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.15 #1   Nicolas Ferre
• [GIT PULL] at91: DT for 3.16 #1   Nicolas Ferre
• [PATCH 0/8] ARM: at91: sama5d3: enable sound support   Nicolas Ferre
• [PATCH 2/3] ARM: at91: at91sam9g45: change at91_adc name   Nicolas Ferre
• [PATCH] ARM: at91: add pull-up to i2c[02] on SAMA5D3 Xplained   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.15 #1   Nicolas Ferre
• [PATCH 0/5] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c   Nicolas Ferre
• [PATCH v3 00/11] ARM: at91: rework main and slow clk implementation   Nicolas Ferre
• exynos4: cpu hotplug + cpuidle/AFTR broken   Tomasz Figa
• exynos4: cpu hotplug + cpuidle/AFTR broken   Tomasz Figa
• [PATCH v2 01/11] base: power: Add generic OF-based power domain look-up   Tomasz Figa
• [PATCH v2 1/7] drm/exynos: add super device support   Tomasz Figa
• [PATCH v2 1/7] drm/exynos: add super device support   Tomasz Figa
• [PATCH v2 1/7] drm/exynos: add super device support   Tomasz Figa
• [PATCH v2 1/7] drm/exynos: add super device support   Tomasz Figa
• [PATCH v2 1/7] drm/exynos: add super device support   Tomasz Figa
• [PATCH 1/4] clk: propagate parent change up one level   Tomasz Figa
• [PATCH 2/4] clk: exynos4: export sclk_hdmiphy clock   Tomasz Figa
• [PATCH 3/4] clk: exynos4: enable clk_set_parent() propagation for sclk_hdmi and sclk_mixer clocks   Tomasz Figa
• [PATCH 4/4] Revert "drm/exynos: add mout_hdmi clock in hdmi driver to change parent"   Tomasz Figa
• [PATCH 01/10] ARM: EXYNOS: Cleanup "mach-exynos/common.h" file   Tomasz Figa
• [PATCH 05/10] ARM: EXYNOS: Move "regs-pmu" header inclusion in common.h   Tomasz Figa
• [PATCH v7 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Tomasz Figa
• [PATCH v7 2/3] ARM: dts: add dts files for exynos5260 SoC   Tomasz Figa
• [PATCH v7 3/3] ARM: dts: add dts files for xyref5260 board   Tomasz Figa
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH v4 2/5] dt: exynos5420: Enable support for USB 3.0 PHY controller   Tomasz Figa
• [PATCH V4 3/5] dt: exynos5420: Enable support for DWC3 controller   Tomasz Figa
• [PATCH V4 4/5] dt: exynos5250: Enable support for generic USB DRD phy   Tomasz Figa
• [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver   Tomasz Figa
• [PATCH] arm: exynos: generalize power register address calculation   Tomasz Figa
• [PATCH V3 10/17] ARM: exynos: cpuidle: Move exynos_set_wakeupmask in the cpu_pm notifier   Tomasz Figa
• [PATCH V3 11/17] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier   Tomasz Figa
• [PATCH V3 12/17] ARM: exynos: cpuidle: Move S5P_CHECK_AFTR in a header   Tomasz Figa
• [PATCH V3 14/17] ARM: exynos: cpuidle: Move the boot vector in pm.c   Tomasz Figa
• [PATCH V3 16/17] ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data   Tomasz Figa
• [PATCH V3 00/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Tomasz Figa
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Tomasz Figa
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH] arm: exynos: generalize power register address calculation   Tomasz Figa
• [PATCH 2/6] ARM: EXYNOS: Staticize exynos_subsys   Tomasz Figa
• [PATCH 2/6] ARM: EXYNOS: Staticize exynos_subsys   Tomasz Figa
• [PATCH V4 10/20] ARM: exynos: cpuidle: Move clock setup to pm.c   Tomasz Figa
• [PATCH V4 10/20] ARM: exynos: cpuidle: Move clock setup to pm.c   Tomasz Figa
• [PATCH 08/27] pinctrl: exynos: Add driver data for Exynos3250   Tomasz Figa
• [PATCH 04/27] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Tomasz Figa
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Tomasz Figa
• [PATCH V4 10/20] ARM: exynos: cpuidle: Move clock setup to pm.c   Tomasz Figa
• [PATCH 12/27] ARM: dts: exynos3250: Add default interrupt-parent connected with GIC   Tomasz Figa
• [PATCH] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Tomasz Figa
• [PATCH] ARM: dts: Fix PL330 MDMA clock assignment for Exynos4x12   Tomasz Figa
• [PATCH V2 0/3] Add PMU and S2R support for exynos5420   Tomasz Figa
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH] arm: exynos: generalize power register address calculation   Tomasz Figa
• [PATCH] arm: exynos: generalize power register address calculation   Tomasz Figa
• [PATCH] clk: exynos4: Use single clock ID for CLK_MDMA gate clocks   Tomasz Figa
• [PATCH v2 1/7] clk: exynos5420: Add more clock register offsets   Tomasz Figa
• [PATCH v2 2/7] clk: exynos5420: Add more clock IDs   Tomasz Figa
• [PATCH v2 3/7] clk: exynos5420: Rename clock IDs   Tomasz Figa
• [PATCH v2 4/7] clk: exynos5420: Rename clock names   Tomasz Figa
• [PATCH v2 5/7] clk: exynos5420: Add missing clocks   Tomasz Figa
• [PATCH v2 7/7] ARM: dts: update macros in clock bindings for exynos5420   Tomasz Figa
• [PATCH v2 1/3] ARM: EXYNOS: Map PMU address through DT   Tomasz Figa
• [PATCH v2 2/3] ARM: EXYNOS: Add initial support of PMU for Exynos5260   Tomasz Figa
• [PATCH v2 3/3] arm: exynos5260: add support for S2R   Tomasz Figa
• [PATCH V2 1/3] ARM: EXYNOS5: Add PMU settings for exynos5420   Tomasz Figa
• [PATCH V2 2/3] ARM: EXYNOS5: Support Suspend-to-RAM on EXYNOS5420   Tomasz Figa
• [PATCH V2 2/3] ARM: EXYNOS5: Support Suspend-to-RAM on EXYNOS5420   Tomasz Figa
• [PATCH V2 3/3] ARM: dts: Add node for GPIO keys on SMDK5420   Tomasz Figa
• [PATCH v8 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Tomasz Figa
• [PATCH v8 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Tomasz Figa
• [PATCHv3 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Tomasz Figa
• [PATCHv3 2/2] iio: devicetree: Add DT binding documentation for Exynos3250 ADC   Tomasz Figa
• [PATCH v2 2/3] ARM: EXYNOS: Add initial support of PMU for Exynos5260   Tomasz Figa
• [PATCH] arm: dts: exynos4: add missing pinctrls for I2C controllers   Tomasz Figa
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Tomasz Figa
• [PATCH v2 0/6] Further cleanup and enable multiplat build   Tomasz Figa
• [PATCHv2 5/8] ARM: EXYNOS: Support secondary CPU boot of Exynos3250   Tomasz Figa
• [PATCHv2 6/8] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Tomasz Figa
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Tomasz Figa
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Tomasz Figa
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Tomasz Figa
• [PATCH] arm: exynos: generalize power register address calculation   Tomasz Figa
• [PATCH 0/4] Fixes for DT CPU topology specification on Exynos   Tomasz Figa
• [PATCH 1/4] ARM: EXYNOS: Fix definitions of S5P_ARM_CORE_* registers   Tomasz Figa
• [PATCH 2/4] ARM: EXYNOS: Fix core ID used by platsmp and hotplug code   Tomasz Figa
• [PATCH 3/4] irqchip: gic: Add support for per CPU bank offset specification in DT   Tomasz Figa
• [PATCH 4/4] ARM: dts: exynos4: Add CPU topology data   Tomasz Figa
• [PATCH 1/4] ARM: EXYNOS: Fix definitions of S5P_ARM_CORE_* registers   Tomasz Figa
• [PATCH 0/2] Support cpufreq driver for Exynos3250   Tomasz Figa
• [PATCH 0/2] Support cpufreq driver for Exynos3250   Tomasz Figa
• [PATCH v3 0/3] Generic Device Tree based power domain look-up   Tomasz Figa
• [PATCH v3 1/3] base: power: Add generic OF-based power domain look-up   Tomasz Figa
• [PATCH v3 2/3] drivercore: Bind/unbind power domain on probe/remove   Tomasz Figa
• [PATCH v3 3/3] ARM: exynos: Move to generic power domain bindings   Tomasz Figa
• [PATCH v2 1/9] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf   Tomasz Figa
• [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tomasz Figa
• [PATCH 1/4] ARM: dts: exynos4: add PMU syscon node   Tomasz Figa
• [PATCH 2/4] ARM: dts: exynos4: add exynos_usbphy node   Tomasz Figa
• [PATCH 3/4] ARM: dts: exynos4: add hsotg device node   Tomasz Figa
• [PATCH V5 00/20] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Tomasz Figa
• [PATCH] ARM: dts: exynos4: clean up arm-pmu node   Tomasz Figa
• [PATCH] arm: dts: exynos4412-trats2: rename alias for i2c_ak8975 label   Tomasz Figa
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Tomasz Figa
• [PATCH] ARM: dts: Remove vmmc-supply for mmc at 12220000 on arndale-octa board   Tomasz Figa
• [PATCH] ARM: dts: Remove vmmc-supply for mmc at 12220000 on arndale-octa board   Tomasz Figa
• [PATCH v2 1/5] ARM: dts: Add syscon handle in pmu node for exynos5250   Tomasz Figa
• [PATCH v2 01/10] ARM: EXYNOS: Make exynos machine_ops as static   Tomasz Figa
• [PATCH v2 02/10] ARM: EXYNOS: Cleanup "mach-exynos/common.h" file   Tomasz Figa
• [PATCH v2 03/10] ARM: EXYNOS: Move SYSREG definition into sys-reg specific file.   Tomasz Figa
• [PATCH v2 04/10] ARM: EXYNOS: Remove file path from comment section   Tomasz Figa
• [PATCH v2 05/10] ARM: EXYNOS: Remove regs-pmu.h header dependency from pm_domain   Tomasz Figa
• [PATCH v2 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Tomasz Figa
• [PATCH v2 07/10] ARM: EXYNOS: Remove "linux/bug.h" from pmu.c   Tomasz Figa
• [PATCH v2 08/10] ARM: EXYNOS: Refactored code for using PMU address via DT   Tomasz Figa
• [PATCH v2 10/10] ARM: EXYNOS: Add device tree based initialization support for PMU.   Tomasz Figa
• [PATCH v2 00/10] ARM: Exynos: PMU cleanup and refactoring for using DT   Tomasz Figa
• [PATCH 2/4] ARM: EXYNOS: Fix core ID used by platsmp and hotplug code   Tomasz Figa
• [PATCH v5 1/2] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tomasz Figa
• [PATCH v6 1/2] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH] ARM: exynos: register sched_clock callback   Tomasz Figa
• [PATCH v5] clk: Exynos5250: Add clocks for G3D   Tomasz Figa
• [PATCH 1/4] ARM: dts: exynos4: add PMU syscon node   Tomasz Figa
• [PATCHv4 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Tomasz Figa
• [PATCHv4 5/7] clk: samsung: exynos3250: Add clocks using common clock framework   Tomasz Figa
• [PATCHv4 1/7] ARM: EXYNOS: Add Exynos3250 SoC ID   Tomasz Figa
• [PATCHv4 2/7] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Tomasz Figa
• [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250   Tomasz Figa
• [PATCH/RFC 3/4] of/clk: Register clocks suitable for Runtime PM with the PM core   Tomasz Figa
• [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250   Tomasz Figa
• [PATCH v8 3/3] ARM: dts: Add initial device tree support for EXYNOS5410   Tomasz Figa
• [PATCH 1/4] clk: propagate parent change up one level   Tomasz Figa
• [PATCH] clk: exynos4: Use single clock ID for CLK_MDMA gate clocks   Tomasz Figa
• [PATCH v6] clk: Exynos5250: Add clocks for G3D   Tomasz Figa
• [PATCH 2/4] clk: exynos4: export sclk_hdmiphy clock   Tomasz Figa
• [PATCH v2 00/21] FDT clean-ups and libfdt support   Max Filippov
• [PATCH v2 03/10] efi: add helper function to get UEFI params from FDT   Matt Fleming
• [PATCH v2 05/10] efi: Add shared FDT related functions for ARM/ARM64   Matt Fleming
• [PATCH v2 08/10] arm64: efi: add EFI stub   Matt Fleming
• [PATCH v2 10/10] efi/arm64: ignore dtb= when UEFI SecureBoot is enabled   Matt Fleming
• [PATCH v2 00/10] arm64: UEFI support   Matt Fleming
• [PATCH v2 00/10] arm64: UEFI support   Matt Fleming
• [PATCH v2 00/10] arm64: UEFI support   Matt Fleming
• [PATCH] ARM: VFP: Fix emulation of multiply accumulate instructions   Jay Foad
• [PATCH v2 0/3] rtc: Add APM X-Gene SoC RTC driver   Dann Frazier
• [PATCH 1/1] arch/arm/mach-ks8695/board-og.c: __initdata fix   Fabian Frederick
• [PATCH RESEND v5] ARM: sun4i: spi: Allow transfers larger than FIFO size   Alexandru Gagniuc
• [PATCH] ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees   Kumar Gala
• [PATCH] clk: qcom: Add support for IPQ8064's global clock controller (GCC)   Kumar Gala
• [PATCH] clk: qcom: Add basic support for APQ8064 global clock controller clocks   Kumar Gala
• [PATCH] clk: qcom: Various fixes for MSM8960's global clock controller   Kumar Gala
• [PATCH] ARM: qcom: Add initial APQ8064 SoC and IFC6410 board device trees   Kumar Gala
• [PATCH v2] clk: qcom: Add support for IPQ8064's global clock controller (GCC)   Kumar Gala
• [PATCH v2] clk: qcom: Add support for IPQ8064's global clock controller (GCC)   Kumar Gala
• [PATCH v2] ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees   Kumar Gala
• [PATCH v2] ARM: qcom: Add initial APQ8064 SoC and IFC6410 board device trees   Kumar Gala
• [PATCH 3/4] soc: qcom: Add device tree binding for GSBI   Kumar Gala
• [PATCH 3/3] ARM: qcom: Select PINCTRL by default for ARCH_QCOM   Kumar Gala
• [PATCH] clk: qcom: Remove accidental merged reject file   Kumar Gala
• [PATCH v5 0/3] add hisilicon hip04 ethernet driver   Zhangfei Gao
• [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet   Zhangfei Gao
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   Zhangfei Gao
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Zhangfei Gao
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Zhangfei Gao
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Zhangfei Gao
• [PATCH v6 0/3] add hisilicon hip04 ethernet driver   Zhangfei Gao
• [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet   Zhangfei Gao
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   Zhangfei Gao
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Zhangfei Gao
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   Zhangfei Gao
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   Zhangfei Gao
• [PATCH v7 0/3] add hisilicon hip04 ethernet driver   Zhangfei Gao
• [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet   Zhangfei Gao
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   Zhangfei Gao
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Zhangfei Gao
• [PATCH v8 0/3] add hisilicon hip04 ethernet driver   Zhangfei Gao
• [PATCH v8 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet   Zhangfei Gao
• [PATCH v8 2/3] net: hisilicon: new hip04 MDIO driver   Zhangfei Gao
• [PATCH v8 3/3] net: hisilicon: new hip04 ethernet driver   Zhangfei Gao
• [PATCH 0/3] add hisilicon clk-hix5hd2   Zhangfei Gao
• [PATCH 1/3] clk: hisi: use clk_register_mux_table in hisi_clk_register_mux   Zhangfei Gao
• [PATCH 2/3] clk: hisi: add hisi_clk_register_gate   Zhangfei Gao
• [PATCH 3/3] clk: hisi: add clk-hix5hd2.c   Zhangfei Gao
• [PATCH 1/2] ARM: mvebu: Enable nfsroot in the defconfig   Ezequiel Garcia
• [PATCH 2/2] ARM: mvebu: enable fhandle in the defconfigs   Ezequiel Garcia
• [PATCH 2/2] net: mvneta: fix usage as a module on RGMII configurations   Ezequiel Garcia
• [PATCH v2] ARM: pxa: Move iotable mapping inside vmalloc region   Ezequiel Garcia
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Ezequiel Garcia
• [RESEND/PATCH v4 0/9] Watchdog support for Armada 375/38x SoC   Ezequiel Garcia
• [RESEND/PATCH v4 1/9] watchdog: orion: Move the register ioremap'ing to its own function   Ezequiel Garcia
• [RESEND/PATCH v4 2/9] watchdog: orion: Introduce a SoC-specific RSTOUT mapping   Ezequiel Garcia
• [RESEND/PATCH v4 3/9] watchdog: orion: Remove unneeded atomic access   Ezequiel Garcia
• [RESEND/PATCH v4 4/9] watchdog: orion: Introduce per-SoC stop() function   Ezequiel Garcia
• [RESEND/PATCH v4 5/9] watchdog: orion: Introduce per-SoC enabled() function   Ezequiel Garcia
• [RESEND/PATCH v4 6/9] watchdog: orion: Add Armada 375/380 SoC support   Ezequiel Garcia
• [RESEND/PATCH v4 7/9] ARM: mvebu: Enable Armada 375 watchdog in the devicetree   Ezequiel Garcia
• [RESEND/PATCH v4 8/9] ARM: mvebu: Enable Armada 380/385 watchdog in the devicetree   Ezequiel Garcia
• [RESEND/PATCH v4 9/9] ARM: mvebu: Add A375/A380 watchdog binding documentation   Ezequiel Garcia
• [PATCH v2 0/4] ARM: mvebu: fix bus width handling in mvebu-devbus   Ezequiel Garcia
• [PATCH 0/6] thermal: Add Armada 375 SoC support   Ezequiel Garcia
• [PATCH 1/6] thermal: armada: Rename armada_thermal_ops struct   Ezequiel Garcia
• [PATCH 2/6] thermal: armada: Add infrastructure to support generic formulas   Ezequiel Garcia
• [PATCH 3/6] thermal: armada: Add generic infrastructure to handle the sensor   Ezequiel Garcia
• [PATCH 4/6] thermal: armada: Support Armada 375 SoC   Ezequiel Garcia
• [PATCH 5/6] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Ezequiel Garcia
• [PATCH 6/6] ARM: mvebu: Enable the thermal sensor in Armada 375 SoC   Ezequiel Garcia
• [PATCH 4/6] thermal: armada: Support Armada 375 SoC   Ezequiel Garcia
• [PATCH 1/2] ARM: mvebu: Enable nfsroot in the defconfig   Ezequiel Garcia
• [PATCH 4/6] thermal: armada: Support Armada 375 SoC   Ezequiel Garcia
• [PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   Ezequiel Garcia
• [PATCH] ARM: Better virt_to_page() handling   Ezequiel Garcia
• [PATCH v2 17/38] ARM: orion5x: use node labels for UART and SATA on edmini_v2   Ezequiel Garcia
• [PATCH RFC] ARM: dts: am335x: update USB DT references   Ezequiel Garcia
• [PATCH RFC] ARM: dts: am335x: update USB DT references   Ezequiel Garcia
• [PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   Ezequiel Garcia
• [RESEND/PATCH v4 0/9] Watchdog support for Armada 375/38x SoC   Ezequiel Garcia
• [PATCH] ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled   Ezequiel Garcia
• [PATCH v2 00/10] thermal: Armada 375/380 SoC support   Ezequiel Garcia
• [PATCH v2 01/10] thermal: armada: Rename armada_thermal_ops struct   Ezequiel Garcia
• [PATCH v2 02/10] thermal: armada: Add infrastructure to support generic formulas   Ezequiel Garcia
• [PATCH v2 03/10] thermal: armada: Add generic infrastructure to handle the sensor   Ezequiel Garcia
• [PATCH v2 04/10] thermal: armada: Pass the platform_device to init_sensor()   Ezequiel Garcia
• [PATCH v2 05/10] thermal: armada: Allow to specify an 'inverted readout' sensor   Ezequiel Garcia
• [PATCH v2 06/10] thermal: armada: Support Armada 375 SoC   Ezequiel Garcia
• [PATCH v2 07/10] thermal: armada: Support Armada 380 SoC   Ezequiel Garcia
• [PATCH v2 08/10] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Ezequiel Garcia
• [PATCH v2 09/10] ARM: mvebu: Enable the thermal sensor in Armada 375 SoC   Ezequiel Garcia
• [PATCH v2 10/10] ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC   Ezequiel Garcia
• [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   Ezequiel Garcia
• [PATCH] ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled   Ezequiel Garcia
• [PATCH v2 14/18] ARM: mvebu: Add support for USB cluster on the Armada 375 SoC   Ezequiel Garcia
• [PATCH] ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled   Ezequiel Garcia
• [PATCH v2 00/10] thermal: Armada 375/380 SoC support   Ezequiel Garcia
• [PATCH v2 05/38] memory: mvebu-devbus: use ARMADA_ prefix in defines   Ezequiel Garcia
• [PATCH v2 05/38] memory: mvebu-devbus: use ARMADA_ prefix in defines   Ezequiel Garcia
• [PATCH v2 10/10] ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC   Ezequiel Garcia
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Ezequiel Garcia
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Ezequiel Garcia
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Ezequiel Garcia
• [PATCH for v3.15] net: mvmdio: Check for a valid interrupt instead of an error   Ezequiel Garcia
• [PATCH for v3.15] net: mvmdio: Check for a valid interrupt instead of an error   Ezequiel Garcia
• [PATCH for v3.15] net: mvmdio: Check for a valid interrupt instead of an error   Ezequiel Garcia
• [PATCH for v3.15] net: mvmdio: Check for a valid interrupt instead of an error   Ezequiel Garcia
• [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   Ezequiel García
• [PATCH] ARM: errata: workaround Cortex-A9 errata 761320 and 794072   Nitin Garg
• [PATCH] ARM: errata: workaround Cortex-A9 errata 761320 and 794072   Nitin Garg
• [PATCH] usb: ohci-exynos: Remove locks for 'ohci' in suspend callback   Vivek Gautam
• [PATCH] usb: ohci-exynos: Remove locks for 'ohci' in suspend callback   Vivek Gautam
• [PATCH] usb: ohci-exynos: Remove locks for 'ohci' in suspend callback   Vivek Gautam
• [PATCH V4 0/5] Add Exynos5 USB 3.0 phy driver based on generic PHY framework   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH v4 2/5] dt: exynos5420: Enable support for USB 3.0 PHY controller   Vivek Gautam
• [PATCH V4 3/5] dt: exynos5420: Enable support for DWC3 controller   Vivek Gautam
• [PATCH V4 4/5] dt: exynos5250: Enable support for generic USB DRD phy   Vivek Gautam
• [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver   Vivek Gautam
• [PATCH RESEND] usb: ohci-exynos: Remove locks for 'ohci' in suspend callback   Vivek Gautam
• [PATCH 1/2] usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails   Vivek Gautam
• [PATCH 2/2] usb: ehci-platform: Return immediately from suspend if ehci_suspend fails   Vivek Gautam
• [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Vivek Gautam
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Vivek Gautam
• [PATCH 1/2] usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails   Vivek Gautam
• [PATCH v2 1/2] usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails   Vivek Gautam
• [PATCH v2 2/2] usb: ehci-platform: Return immediately from suspend if ehci_suspend fails   Vivek Gautam
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Vivek Gautam
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators   Vivek Gautam
• [PATCH 2/3] usb: ehci-exynos: Make provision for vdd regulators   Vivek Gautam
• [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators   Vivek Gautam
• [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH v5 0/2] Add Exynos5 USB 3.0 phy driver based on generic PHY framework   Vivek Gautam
• [PATCH v5 1/2] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH v5 2/2] phy: exynos5-usbdrd: Add facility for VBUS supply   Vivek Gautam
• [PATCH v6 1/2] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH v6 2/2] phy: exynos5-usbdrd: Add facility for VBUS supply   Vivek Gautam
• [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators   Vivek Gautam
• [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators   Vivek Gautam
• [PATCH 0/9] Enable USB 3.0 support on Exynos5 systems   Vivek Gautam
• [PATCH v5 1/9] dt: exynos5420: Enable support for USB 3.0 PHY controller   Vivek Gautam
• [PATCH v5 2/9] dt: exynos5420: Enable support for DWC3 controller   Vivek Gautam
• [PATCH v5 3/9] dt: exynos5250: Enable support for generic USB DRD phy   Vivek Gautam
• [PATCH v5 4/9] dts: exynos5250: Update DWC3 usb controller to use new phy driver   Vivek Gautam
• [PATCH v5 5/9] dts: exynos5250-snow: Add Vbus regulator for USB 3.0   Vivek Gautam
• [PATCH v5 6/9] dts: exynos5420-peach-pit: Add Vbus regulator for USB 3.0   Vivek Gautam
• [PATCH v5 7/9] dts: exynos5420-smdk5420: Add Vbus regulator for USB 3.0   Vivek Gautam
• [PATCH v5 8/9] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver   Vivek Gautam
• [PATCH v5 9/9] ARM: exynos_defconfig: Remove SAMSUNG_USB3PHY config   Vivek Gautam
• [PATCH 0/3] dts: exynos5: Add required VDD supplies for USB   Vivek Gautam
• [PATCH 1/3] dts: exynos5250: Add required VDD regulator supplies for usb   Vivek Gautam
• [PATCH 2/3] dts: exynos5250-snow: Add required VDD regulator supplies for usb   Vivek Gautam
• [PATCH 3/3] dts: exynos5420-smdk5420: Add required VDD regulator supplies for usb   Vivek Gautam
• [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators   Vivek Gautam
• [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators   Vivek Gautam
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH 0/2] usb: ehci/ohci-exynos: Move to generic phy framework   Vivek Gautam
• [PATCH v2 1/2] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v7 2/2] usb: ehci-exynos: Change to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v8 2/2] usb: ehci-exynos: Change to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v7 0/2] dts: Add usb2phy to Exynos 5250   Vivek Gautam
• [PATCH v7 1/2] ARM: dts: Add sysreg sytem controller node to exynos5250 and exynos5420   Vivek Gautam
• [PATCH v7 2/2] ARM: dts: Add usb2phy to Exynos 5250   Vivek Gautam
• [PATCH v2 1/2] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v8 2/2] usb: ehci-exynos: Change to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v5 1/2] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH v7 1/2] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH v7 2/2] phy: exynos5-usbdrd: Add facility for VBUS supply   Vivek Gautam
• [PATCH v3 0/4] usb: ehci/ohci-exynos: Move to generic phy framework   Vivek Gautam
• [PATCH v3 0/4] usb: ehci/ohci-exynos: Move to generic phy framework   Vivek Gautam
• [PATCH 1/4] usb: ohci-exynos: Use struct device instead of platform_device   Vivek Gautam
• [PATCH 2/4] usb: ehci-exynos: Use struct device instead of platform_device   Vivek Gautam
• [PATCH v3 3/4] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v9 4/4] usb: ehci-exynos: Change to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v3 0/4] usb: ehci/ohci-exynos: Move to generic phy framework   Vivek Gautam
• [PATCH v7 1/2] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH v3 3/4] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v2 1/4] usb: ohci-exynos: Use struct device instead of platform_device   Vivek Gautam
• [PATCH v2 2/4] usb: ehci-exynos: Use struct device instead of platform_device   Vivek Gautam
• [PATCH v4 3/4] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH v10 4/4] usb: ehci-exynos: Change to use phy provided by the generic phy framework   Vivek Gautam
• [PATCH 0/4] dts: Add usb2phy to Exynos 5250/5420   Vivek Gautam
• [PATCH v8 1/4] ARM: dts: Add sysreg sytem controller node to exynos5250 and exynos5420   Vivek Gautam
• [PATCH 2/4] ARM: dts: Add usb2phy to Exynos 5250   Vivek Gautam
• [PATCH 3/4] ARM: dts: Add usb2phy support on exynos5420   Vivek Gautam
• [PATCH 4/4] ARM: dts: Add usb 2.0 support on exynos5420   Vivek Gautam
• [PATCH 3/4] ARM: dts: Add usb2phy support on exynos5420   Vivek Gautam
• [PATCH v6 1/3] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH v6 1/3] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH] tty/serial: atmel_serial: Fix device tree documentation   Richard Genoud
• [PATCH] tty/serial: atmel_serial: Fix device tree documentation   Richard Genoud
• [PATCH] tty/serial: atmel_serial: Fix device tree documentation   Richard Genoud
• [PATCH] tty/serial: atmel_serial: Fix device tree documentation   Richard Genoud
• [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver   Richard Genoud
• [PATCH RESEND] tty/serial: atmel_serial: Fix device tree documentation   Richard Genoud
• [PATCH RESEND] tty/serial: atmel_serial: Fix device tree documentation   Richard Genoud
• [PATCH RESEND] tty/serial: atmel_serial: Fix device tree documentation   Richard Genoud
• [PATCH] tty/serial: atmel_serial: Fix device tree documentation   Richard Genoud
• [PATCH 0/5] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c   Richard Genoud
• [PATCH 1/5] tty/serial: atmel_serial: Fix device tree documetation   Richard Genoud
• [PATCH 2/5] ARM: at91: gpio: implement get_direction   Richard Genoud
• [PATCH 3/5] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH 4/5] tty/serial: at91: use mctrl_gpio helpers   Richard Genoud
• [PATCH 5/5] tty/serial: at91: add interrupts for modem control lines   Richard Genoud
• [PATCH v6 1/3] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH 0/5] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c   Richard Genoud
• [PATCH] ARM: dts: am437x-gp-evm: Boot fixes   Dave Gerlach
• [PATCH] ARM: dts: am437x-gp-evm: Add vtt_fixed regulator   Dave Gerlach
• [PATCH] ARM: dts: am437x-gp-evm: Add vtt_fixed regulator   Dave Gerlach
• [PATCH] ARM: dts: am437x-gp-evm: Boot fixes   Dave Gerlach
• [PATCH] ARM: dts: am437x-gp-evm: Boot fixes   Dave Gerlach
• [PATCH] ARM: dts: am437x-gp-evm: Boot fixes   Dave Gerlach
• [PATCH] ARM: OMAP2+: free use_gptimer_clksrc variable after boot   Oussama Ghorbel
• [PATCH] dtc: add ability to make nodes conditional on them being referenced   David Gibson
• [PATCH] arm: edma: Fix xbar mapping   Thomas Gleixner
• [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging   Thomas Gleixner
• [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging   Thomas Gleixner
• [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging   Thomas Gleixner
• [patch 0/4] genirq/exynos timers: Fix the CPU hotplug wreckage sanely   Thomas Gleixner
• [patch 0/6] dma: edma: Provide granular residue accounting   Thomas Gleixner
• [patch 1/6] dma: edma: Sanitize residue reporting   Thomas Gleixner
• [patch 2/6] dma: edma: Check the current decriptor first in tx_status()   Thomas Gleixner
• [patch 3/6] dma: edma: Create private pset struct   Thomas Gleixner
• [patch 4/6] dma: edma: Store transfer data in edma_desc and edma_pset   Thomas Gleixner
• [patch 5/6] edma: Make reading the position of active channels work   Thomas Gleixner
• [patch 6/6] dma: edma: Provide granular accounting   Thomas Gleixner
• [patch 0/6] dma: edma: Provide granular residue accounting   Thomas Gleixner
• [patch 0/6] dma: edma: Provide granular residue accounting   Thomas Gleixner
• [patch 5/6] edma: Make reading the position of active channels work   Thomas Gleixner
• [patch 6/6] dma: edma: Provide granular accounting   Thomas Gleixner
• [patch 5/6] edma: Make reading the position of active channels work   Thomas Gleixner
• [patch V2 0/6] dma: edma: Provide granular residue accounting   Thomas Gleixner
• [patch V2 1/6] dma: edma: Sanitize residue reporting   Thomas Gleixner
• [patch V2 2/6] dma: edma: Check the current decriptor first in tx_status()   Thomas Gleixner
• [patch V2 3/6] dma: edma: Create private pset struct   Thomas Gleixner
• [patch V2 4/6] dma: edma: Store transfer data in edma_desc and edma_pset   Thomas Gleixner
• [patch V2 5/6] edma: Make reading the position of active channels work   Thomas Gleixner
• [patch V2 6/6] dma: edma: Provide granular accounting   Thomas Gleixner
• [PATCH] arm: edma: Fix xbar mapping   Thomas Gleixner
• [PATCH RESEND 3/3] irqchip: orion: reverse irq handling priority   Thomas Gleixner
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Christian Gmeiner
• [PATCH v7 5/6] pci: Export find_pci_host_bridge() function.   One Thousand Gnomes
• [PATCH v6 2/5] ARM: Add Krait L2 register accessor functions   One Thousand Gnomes
• [PATCH v4 2/2] reset: Add GPIO support to reset controller framework   One Thousand Gnomes
• [linux-sunxi] Re: [PATCH 7/7] ARM: sun7i: cubietruck: enable bluetooth module   One Thousand Gnomes
• [PATCH v4 12/21] serial: support for 16550A serial ports on LP-8x4x   One Thousand Gnomes
• [PATCH v4 21/21] misc: support for I-8024 in LP-8x4x   One Thousand Gnomes
• [PATCH v4 13/21] misc: support for LP-8x4x custom parallel bus   One Thousand Gnomes
• [PATCH v4 21/21] misc: support for I-8024 in LP-8x4x   One Thousand Gnomes
• [PATCH v4 12/21] serial: support for 16550A serial ports on LP-8x4x   One Thousand Gnomes
• [PATCH v4 13/21] misc: support for LP-8x4x custom parallel bus   One Thousand Gnomes
• [PATCH 0/4] ARM: sunxi: dt: Misc. fixes   Hans de Goede
• [PATCH 1/4] ARM: sun6i: dt: Fixup prcm node name   Hans de Goede
• [PATCH 2/4] ARM: sun4i: dt: Add address- and size-cells info to i2c controller nodes   Hans de Goede
• [PATCH 3/4] ARM: sun5i: dt: Add address- and size-cells info to i2c controller nodes   Hans de Goede
• [PATCH 4/4] ARM: sun7i: dt: Add address- and size-cells info to i2c controller nodes   Hans de Goede
• [PATCH] reset: Add of_reset_control_get to reset.h   Hans de Goede
• [linux-sunxi] Re: [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Hans de Goede
• [linux-sunxi] Re: [PATCH 7/7] ARM: sun7i: cubietruck: enable bluetooth module   Hans de Goede
• [linux-sunxi] Re: [PATCH 7/7] ARM: sun7i: cubietruck: enable bluetooth module   Hans de Goede
• [PATCH v8 00/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH v8 01/17] clk: sunxi: factors: automatic reparenting support   Hans de Goede
• [PATCH v8 02/17] clk: sunxi: Implement MMC phase control   Hans de Goede
• [PATCH v8 03/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH v8 04/17] ARM: dts: sun4i: Add mmc controller nodes   Hans de Goede
• [PATCH v8 05/17] ARM: dts: sun4i: Add pin-muxing info for the mmc0 controller   Hans de Goede
• [PATCH v8 06/17] ARM: dts: sun4i: Enable mmc controller on various A10 boards   Hans de Goede
• [PATCH v8 07/17] ARM: dts: sun5i: Add mmc controller nodes   Hans de Goede
• [PATCH v8 08/17] ARM: dts: sun5i: Add pin-muxing info for the mmc controllers   Hans de Goede
• [PATCH v8 09/17] ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards   Hans de Goede
• [PATCH v8 10/17] ARM: dts: sun6i: Add mmc clocks   Hans de Goede
• [PATCH v8 11/17] ARM: dts: sun6i: Add mmc controller nodes   Hans de Goede
• [PATCH v8 12/17] ARM: dts: sun6i: Add pin-muxing info for the mmc controllers   Hans de Goede
• [PATCH v8 13/17] ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9   Hans de Goede
• [PATCH v8 14/17] ARM: dts: sun6i: Enable the mmc controller on the m9   Hans de Goede
• [PATCH v8 15/17] ARM: dts: sun7i: Add mmc controller nodes   Hans de Goede
• [PATCH v8 16/17] ARM: dts: sun7i: Add pin-muxing info for the mmc controllers   Hans de Goede
• [PATCH v8 17/17] ARM: dts: sun7i: Enable mmc controller on various A20 boards   Hans de Goede
• [PATCH v8 00/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [linux-sunxi] Re: [PATCH v8 10/17] ARM: dts: sun6i: Add mmc clocks   Hans de Goede
• [linux-sunxi] Re: [PATCH v8 07/17] ARM: dts: sun5i: Add mmc controller nodes   Hans de Goede
• [PATCH v8 11/17] ARM: dts: sun6i: Add mmc controller nodes   Hans de Goede
• [PATCH v9 00/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH v9 01/17] clk: sunxi: factors: automatic reparenting support   Hans de Goede
• [PATCH v9 02/17] clk: sunxi: Implement MMC phase control   Hans de Goede
• [PATCH v9 03/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH v9 04/17] ARM: dts: sun4i: Add mmc controller nodes   Hans de Goede
• [PATCH v9 05/17] ARM: dts: sun4i: Add pin-muxing info for the mmc0 controller   Hans de Goede
• [PATCH v9 06/17] ARM: dts: sun4i: Enable mmc controller on various A10 boards   Hans de Goede
• [PATCH v9 07/17] ARM: dts: sun5i: Add mmc controller nodes   Hans de Goede
• [PATCH v9 08/17] ARM: dts: sun5i: Add pin-muxing info for the mmc controllers   Hans de Goede
• [PATCH v9 09/17] ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards   Hans de Goede
• [PATCH v9 10/17] ARM: dts: sun6i: Add mmc clocks   Hans de Goede
• [PATCH v9 11/17] ARM: dts: sun6i: Add mmc controller nodes   Hans de Goede
• [PATCH v9 12/17] ARM: dts: sun6i: Add pin-muxing info for the mmc controllers   Hans de Goede
• [PATCH v9 13/17] ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9   Hans de Goede
• [PATCH v9 14/17] ARM: dts: sun7i: Add mmc controller nodes   Hans de Goede
• [PATCH v9 15/17] ARM: dts: sun7i: Add pin-muxing info for the mmc controllers   Hans de Goede
• [PATCH v9 16/17] ARM: dts: sun7i: Enable mmc controller on various A20 boards   Hans de Goede
• [PATCH v9 17/17] ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module   Hans de Goede
• [linux-sunxi] [PATCH 1/2] ARM: sun7i: Add ARM PMU in A20 DTSI   Hans de Goede
• [linux-sunxi] [PATCH] ARM: sun7i: Fix i2c4 base address   Hans de Goede
• [PATCH v9 05/17] ARM: dts: sun4i: Add pin-muxing info for the mmc0 controller   Hans de Goede
• [PATCH v9 03/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH v9 10/17] ARM: dts: sun6i: Add mmc clocks   Hans de Goede
• [PATCH v1] dma: imx-sdma: add support for sdma memory copy   Robin Gong
• [PATCH v1] dma: imx-sdma: add support for sdma memory copy   Robin Gong
• [PATCH v1] dma: imx-sdma: add support for sdma memory copy   Robin Gong
• [PATCH RESEND 4/5] ARM: BCM63XX: add BCM963138DVT Reference platform DTS   Jonas Gorski
• current->sched_class->yield_task is NULL, any hint?   Paul Gortmaker
• [PATCH] Xen: do hv callback accounting only on x86   Julien Grall
• [PATCH] Xen: do hv callback accounting only on x86   Julien Grall
• [RFC] Extend zImage format to support notes   Julien Grall
• [RFC] Extend zImage format to support notes   Julien Grall
• [RFC] Extend zImage format to support notes   Julien Grall
• [PATCH] arm/xen: Remove definiition of virt_to_pfn in asm/xen/page.h   Julien Grall
• [PATCH] arm/xen: Remove definiition of virt_to_pfn in asm/xen/page.h   Julien Grall
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Neil Greatorex
• Fixing PCIe issues on Armada XP   Neil Greatorex
• Fixing PCIe issues on Armada XP   Neil Greatorex
• Fixing PCIe issues on Armada XP   Neil Greatorex
• Fixing PCIe issues on Armada XP   Neil Greatorex
• [PATCH v3 part1 04/11] ARM64 / ACPI: Introduce arm-core.c and its related head file   Graeme Gregory
• [PATCH v3 part1 04/11] ARM64 / ACPI: Introduce arm-core.c and its related head file   Graeme Gregory
• [PATCH 0/3] pinctrl: qcom: Add IPQ8064 pinctrl support   Andy Gross
• [PATCH 1/3] pinctrl: qcom: Add definitions for IPQ8064   Andy Gross
• [PATCH 2/3] dt: Document Qualcomm IPQ8064 pinctrl binding   Andy Gross
• [PATCH 3/3] ARM: qcom: Select PINCTRL by default for ARCH_QCOM   Andy Gross
• [PATCH 0/2] dmaengine: qcom_bam_dma: Add support for v1.3.0   Andy Gross
• [PATCH 1/2] dmaengine: qcom_bam_dma: Add v1.3.0 driver support   Andy Gross
• [PATCH 2/2] dmaengine: qcom_bam_dma: Add binding for v1.3.0   Andy Gross
• [PATCH] dmaengine: qcom_bam_dma: Add descriptor flag APIs   Andy Gross
• [PATCH 1/2] dmaengine: qcom_bam_dma: Add v1.3.0 driver support   Andy Gross
• [PATCH 0/4] Introduce drivers/soc and add QCOM GSBI driver   Andy Gross
• [PATCH 1/4] soc: Placeholder files for drivers/soc   Andy Gross
• [PATCH 2/4] soc: qcom: Add GSBI driver   Andy Gross
• [PATCH 3/4] soc: qcom: Add device tree binding for GSBI   Andy Gross
• [PATCH 4/4] tty: serial: msm: Remove direct access to GSBI   Andy Gross
• [PATCH 0/4] Introduce drivers/soc and add QCOM GSBI driver   Andy Gross
• [PATCH 2/4] soc: qcom: Add GSBI driver   Andy Gross
• [Patch v2 0/4] Introduce drivers/soc and add QCOM GSBI driver   Andy Gross
• [Patch v2 1/4] soc: Placeholder files for drivers/soc   Andy Gross
• [Patch v2 2/4] soc: qcom: Add device tree binding for GSBI   Andy Gross
• [Patch v2 3/4] soc: qcom: Add GSBI driver   Andy Gross
• [Patch v2 4/4] tty: serial: msm: Remove direct access to GSBI   Andy Gross
• [PATCH] pinctrl: qcom: Correct name for pin 0   Andy Gross
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Grant Grundler
• USB OTG support on mx27pdk   Michael Grzeschik
• [PATCH v4 00/17] ASoC: fsl-ssi: Driver cleanup   Michael Grzeschik
• [PATCH 0/4] Add a DT description of LaCie 2Big and 5Big Network v2   Simon Guinot
• [PATCH 2/4] ARM: Kirkwood: Add DT descriptions for net2big and net5big.   Simon Guinot
• [RFC 4/4] sched: add per group cpu_power_orig   Vincent Guittot
• [RFC 1/4] sched: extend the usage of cpu_power_orig   Vincent Guittot
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Vincent Guittot
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Vincent Guittot
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Vincent Guittot
• [PATCH v4 0/5] rework sched_domain topology description   Vincent Guittot
• [PATCH v4 1/5] sched: rework of sched_domain topology definition   Vincent Guittot
• [PATCH v4 2/5] sched: s390: create a dedicated topology table   Vincent Guittot
• [PATCH v4 3/5] sched: powerpc: create a dedicated topology table   Vincent Guittot
• [PATCH v4 4/5] sched: add a new SD_SHARE_POWERDOMAIN for sched_domain   Vincent Guittot
• [PATCH v4 5/5] sched: ARM: create a dedicated scheduler topology table   Vincent Guittot
• [PATCH v4 0/5] rework sched_domain topology description   Vincent Guittot
• [RFC 3/4] sched: fix computed capacity for HMP   Vincent Guittot
• [PATCH] fix: sched: rework of sched_domain topology definition   Vincent Guittot
• [PATCH v4 1/5] sched: rework of sched_domain topology definition   Vincent Guittot
• [PATCH] fix: sched: rework of sched_domain topology definition   Vincent Guittot
• [PATCH v4 4/5] sched: add a new SD_SHARE_POWERDOMAIN for sched_domain   Vincent Guittot
• [PATCH v4 5/5] sched: ARM: create a dedicated scheduler topology table   Vincent Guittot
• [PATCH v4 5/5] sched: ARM: create a dedicated scheduler topology table   Vincent Guittot
• [PATCH] ARM: exynos: register sched_clock callback   Vincent Guittot
• [PATCH v4 5/5] sched: ARM: create a dedicated scheduler topology table   Vincent Guittot
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Jason Gunthorpe
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Jason Gunthorpe
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Jason Gunthorpe
• [RESEND: RFC PATCH 3/3] pcie: keystone: add pcie driver based on designware core driver   Jason Gunthorpe
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Jason Gunthorpe
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Jason Gunthorpe
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Jason Gunthorpe
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Jason Gunthorpe
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Jason Gunthorpe
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Jason Gunthorpe
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Jason Gunthorpe
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Jason Gunthorpe
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Jason Gunthorpe
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Jason Gunthorpe
• [PATCH v2] bus: mvebu-mbus: Avoid setting an undefined window size   Jason Gunthorpe
• [PATCH v2] bus: mvebu-mbus: Avoid setting an undefined window size   Jason Gunthorpe
• [PATCH v2] bus: mvebu-mbus: Avoid setting an undefined window size   Jason Gunthorpe
• Fixing PCIe issues on Armada XP   Jason Gunthorpe
• Fixing PCIe issues on Armada XP   Jason Gunthorpe
• Fixing PCIe issues on Armada XP   Jason Gunthorpe
• Fixing PCIe issues on Armada XP   Jason Gunthorpe
• Fixing PCIe issues on Armada XP   Jason Gunthorpe
• Fixing PCIe issues on Armada XP   Jason Gunthorpe
• [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible   Jason Gunthorpe
• [PATCH v5 2/4] arm64: dts: APM X-Gene PCIe device tree nodes   Jason Gunthorpe
• [PATCH v5 2/4] arm64: dts: APM X-Gene PCIe device tree nodes   Jason Gunthorpe
• Change of TEXT_OFFSET for multi_v7_defconfig   Jason Gunthorpe
• [Qemu-devel] Change of TEXT_OFFSET for multi_v7_defconfig   Jason Gunthorpe
• Change of TEXT_OFFSET for multi_v7_defconfig   Jason Gunthorpe
• Fixing PCIe issues on Armada XP   Jason Gunthorpe
• [Qemu-devel] Change of TEXT_OFFSET for multi_v7_defconfig   Jason Gunthorpe
• Fixing PCIe issues on Armada XP   Jason Gunthorpe
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Jason Gunthorpe
• [PATCH v7 01/10] PCI: host: rcar: Add Renesas R-Car PCIe driver   Jason Gunthorpe
• [PATCH v7 01/10] PCI: host: rcar: Add Renesas R-Car PCIe driver   Jason Gunthorpe
• [PATCH 07/15] ARM: dts: kirkwood: consolidate common pinctrl settings   Jason Gunthorpe
• [PATCH 07/15] ARM: dts: kirkwood: consolidate common pinctrl settings   Jason Gunthorpe
• [PATCH] arm64: Fix duplicated Kconfig entries again   Hanjun Guo
• [PATCH] arm64: Fix duplicated Kconfig entries again   Hanjun Guo
• [PATCH] arm64: Fix duplicated Kconfig entries again   Hanjun Guo
• [PATCH] arm64: Fix duplicated Kconfig entries again   Hanjun Guo
• [PATCH] ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig"   Hanjun Guo
• [PATCH] ACPI: Update the ownership and developers for ACPI in Kconfig   Hanjun Guo
• [PATCH] ACPI: Update the ownership and developers for ACPI in Kconfig   Hanjun Guo
• [PATCH] ACPI: Update the ownership and developers for ACPI in Kconfig   Hanjun Guo
• [PATCH V2] ACPI: Update the ownership and developers for ACPI in Kconfig   Hanjun Guo
• [PATCH V2] ACPI: Update the ownership and developers for ACPI in Kconfig   Hanjun Guo
• [PATCH v7 6/6] pci: Add support for creating a generic host_bridge from device tree   Hanjun Guo
• [PATCH V3] ACPI: Update the ownership and developers for ACPI in Kconfig   Hanjun Guo
• [PATCH v3 part1 00/11] Enable ACPI on ARM64 in Kconfig   Hanjun Guo
• [PATCH v3 part1 01/11] ACPI / processor: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [PATCH v3 part1 02/11] ARM64 / ACPI: Introduce the skeleton of _PDC related for ARM64   Hanjun Guo
• [PATCH v3 part1 03/11] ARM64 : Add dummy asm/cpu.h   Hanjun Guo
• [PATCH v3 part1 04/11] ARM64 / ACPI: Introduce arm-core.c and its related head file   Hanjun Guo
• [PATCH v3 part1 05/11] ARM64 / ACPI: Introduce early_param for "acpi"   Hanjun Guo
• [PATCH v3 part1 06/11] ARM64 / ACPI: Introduce lowlevel suspend function   Hanjun Guo
• [PATCH v3 part1 07/11] ARM64 / ACPI: Introduce arch_fix_phys_package_id() for cpu topology   Hanjun Guo
• [PATCH v3 part1 08/11] ARM64 / ACPI: Introduce PCI functions for ACPI on ARM64   Hanjun Guo
• [PATCH v3 part1 09/11] ARM64 / ACPI: Enable ARM64 in Kconfig   Hanjun Guo
• [PATCH v3 part1 10/11] ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64   Hanjun Guo
• [PATCH v3 part1 11/11] ACPI: Make EC depend on X86 || IA64 in Kconfig   Hanjun Guo
• [PATCH v3 part1 07/11] ARM64 / ACPI: Introduce arch_fix_phys_package_id() for cpu topology   Hanjun Guo
• [PATCH v3 part1 04/11] ARM64 / ACPI: Introduce arm-core.c and its related head file   Hanjun Guo
• [PATCH v3 part1 08/11] ARM64 / ACPI: Introduce PCI functions for ACPI on ARM64   Hanjun Guo
• [Linaro-acpi] [PATCH v3 part1 06/11] ARM64 / ACPI: Introduce lowlevel suspend function   Hanjun Guo
• [PATCH] ARM: dts: imx35-pdk: Add initial device tree support   Shawn Guo
• [PATCH v2 1/2] ARM: dts: imx51-babbage: Add USB Host1 support   Shawn Guo
• [PATCH v2 0/4] arm: mxs: dts: small fixes for I2SE's duckbills   Shawn Guo
• [PATCH v2 0/4] arm: mxs: dts: small fixes for I2SE's duckbills   Shawn Guo
• [PATCH 1/2] ARM: dts: imx53-qsb-common: Fix memory region description   Shawn Guo
• [PATCH] ARM: dts: stmpe-ts: fix wrong bindings   Shawn Guo
• [PATCH] ARM: dts: imx27-phytec-phycore-rdk: Add display control signal definitions   Shawn Guo
• [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Shawn Guo
• [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Shawn Guo
• [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Shawn Guo
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Shawn Guo
• [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Shawn Guo
• [PATCH v2 1/2] ARM: dts: mx5: fix wrong stmpe-ts bindings   Shawn Guo
• [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration   Shawn Guo
• [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range   Shawn Guo
• [PATCH 2/2] ARM: dts: add initial Colibri VF61 board support   Shawn Guo
• [PATCH 75/75] ARM: l2c: imx: remove direct write to power control register   Shawn Guo
• [PATCH 2/2] ARM: dts: imx: drop invalid size and address cells properties   Shawn Guo
• [PATCH 1/8] ARM: imx6q-clk: parent lvds_gate from lvds_sel   Shawn Guo
• [PATCH 4/8] PCI: imx6: use new clock names   Shawn Guo
• [PATCH v3 1/2] i2c: add DMA support for freescale i2c driver   Shawn Guo
• FEC ethernet issues [Was: PL310 errata workarounds]   Shawn Guo
• FEC ethernet issues [Was: PL310 errata workarounds]   Shawn Guo
• [PATCH 75/75] ARM: l2c: imx: remove direct write to power control register   Shawn Guo
• Inconsistent lock state introduced by ipv6/addrconf change   Shawn Guo
• MX28: leds/pwm: Using pwm driven led as heartbeat leads to kernel warning   Shawn Guo
• Inconsistent lock state introduced by ipv6/addrconf change   Shawn Guo
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Shawn Guo
• [PATCH v2 0/2] ARM: dts: add initial Colibri VF61 board support   Shawn Guo
• L2 cache suspend/resume   Shawn Guo
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Shawn Guo
• L2 cache suspend/resume   Shawn Guo
• [PATCH v5 00/11] imx-drm dt bindings   Shawn Guo
• [PATCH v5 00/11] imx-drm dt bindings   Shawn Guo
• [PATCH v5 00/11] imx-drm dt bindings   Shawn Guo
• MX28: leds/pwm: Using pwm driven led as heartbeat leads to kernel warning   Shawn Guo
• [PATCH] ARM: imx: Remove mx51_babbage board file   Shawn Guo
• [PATCH] arm/imx: factor device tree timer initialization   Shawn Guo
• [PATCH] ARM: mxs_defconfig: Select CONFIG_CRYPTO_DEV_MXS_DCP   Shawn Guo
• [PATCH] ARM: dt: microsom: don't set bit 7 for ethernet mux settings   Shawn Guo
• MX28: leds/pwm: Using pwm driven led as heartbeat leads to kernel warning   Shawn Guo
• MX28: leds/pwm: Using pwm driven led as heartbeat leads to kernel warning   Shawn Guo
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Shawn Guo
• [PATCH v12][ 06/12] ARM: dts: imx5*, imx6*: correct display-timings nodes.   Shawn Guo
• [PATCH v12][ 12/12] ARM: imx_v6_v7_defconfig: Add more drm drivers.   Shawn Guo
• [PATCH v2][ 2/3] ARM: dts: mbimxsd51 baseboard: Add USB support.   Shawn Guo
• [PATCH v2][ 3/3] ARM: imx_v6_v7_defconfig: Enable drivers for i.MX51 USB Host support.   Shawn Guo
• [PATCH 1/4] ARM: dts: imx6: edmqmx6: Fix usbotg id pin   Shawn Guo
• [PATCH v11][ 1/2] ARM: dts: cpuimx35 Add touchscreen support.   Shawn Guo
• [PATCH] ARM: dts: i.MX: Use single naming style for i.MX WEIM devices   Shawn Guo
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Shawn Guo
• [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration   Shawn Guo
• [PATCH 2/3] ARM i.MX6: Fix ethernet PLL clocks   Shawn Guo
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Shawn Guo
• [PATCH] gpio: mxs: Allow for recursive enable_irq_wake() call   Shawn Guo
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Shawn Guo
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Shawn Guo
• [PATCH] ARM: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Shawn Guo
• [PATCH] mx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus'   Shawn Guo
• [PATCH] staging: imx-drm-core: skip components whose parent device is disabled   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: enable cpufreq and CMA support   Shawn Guo
• [PATCH] ARM: dts: imx53-tx53: add IPU DI ports and endpoints   Shawn Guo
• [PATCH] ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' property   Shawn Guo
• [PATCH 1/2] ARM: dt-binding: fix GIC example   Shawn Guo
• [PATCH 0/4] ARM: imx6: cleanup for fixed-clock   Shawn Guo
• [PATCH 1/4] ARM: dts: imx: add required #clock-cells for fixed-clock   Shawn Guo
• [PATCH 2/4] ARM: dts: imx6: define input clocks to CCM block   Shawn Guo
• [PATCH 3/4] ARM: dts: imx6: use of_clk_get_by_name() to retrieve fixed-clock   Shawn Guo
• [PATCH 4/4] ARM: dts: imx6: use generic name for fixed-clock nodes   Shawn Guo
• [PATCH 3/4] ARM: dts: imx6: use of_clk_get_by_name() to retrieve fixed-clock   Shawn Guo
• [PATCH v3] ARM: dts: i.MX: Use single naming style for i.MX WEIM device   Shawn Guo
• [PATCH v2 3/3] ARM: dts: imx27-pdk: Pass the FEC pin configuration   Shawn Guo
• [PATCH BUGFIX] arm: dts: imx53: fix apparent copy/paste error   Shawn Guo
• [PATCH v2] pwm: i.MX: Avoid sample fifo overflow for i.MX pwm version2   Shawn Guo
• [PATCH] ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11   Shawn Guo
• [PATCH v2] ARM i.MX51: Add Digi ConnectCore devicetree   Shawn Guo
• [PATCH 02/10] ARM: dts: imx51-babbage: Use separate pingroup for fixed-clock   Shawn Guo
• [PATCH 09/10] ARM: dts: imx51-babbage: Add "clock-frequency" property for I2C2   Shawn Guo
• [PATCH 1/2] ARM: dts: i.MX27: Allow to define partitions onto SDHC   Shawn Guo
• [PATCH v4 1/3] ARM: dts: imx27-pdk: Keep the dt nodes sorted   Shawn Guo
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Shawn Guo
• [PATCH 4/6] ARM: dts: vybrid: drop address and size cells from GIC node   Shawn Guo
• [PATCH 3/4] ARM: dts: imx6: use of_clk_get_by_name() to retrieve fixed-clock   Shawn Guo
• [PATCH] ARM: imx: drop CONFIG_MMC_UNSAFE_RESUME from defconfig   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: enable option CONFIG_LOCALVERSION_AUTO   Shawn Guo
• [PATCH 1/2] ahci: imx: use macros to define registers and bits   Shawn Guo
• [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume   Shawn Guo
• [PATCH 1/2] ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel   Shawn Guo
• [GIT PULL] ARM: imx: fixes for 3.15   Shawn Guo
• [PATCH 01/10] ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo   Shawn Guo
• [PATCH 02/10] ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo   Shawn Guo
• [PATCH] ARM: dts: imx6qdl: Add VDOA compatible and clocks properties   Shawn Guo
• [PATCH] ARM: dts: imx27-pdk: Add PMIC support   Shawn Guo
• [PATCH 1/2] ahci: imx: use macros to define registers and bits   Shawn Guo
• [PATCH] ARM: dts: imx27-pdk: Add PMIC support   Shawn Guo
• [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume   Shawn Guo
• [RFC PATCH] imx6: imx6duallite/solo i2c4 clock   Shawn Guo
• [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031   Shawn Guo
• [PATCH 1/2] ahci: imx: use macros to define registers and bits   Shawn Guo
• [PATCH] ARM: mach-mxs: readd just removed select CLKSRC_OF   Shawn Guo
• [RFC][PATCH 1/3] ARM: dts: vf610: Add Freescale FlexTimer Module timer node.   Shawn Guo
• [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume   Shawn Guo
• [PATCH 1/8] ARM: dts: i.MX51: Allow to define partitions onto NFC   Shawn Guo
• [PATCH v3] ARM: dts: imx27-pdk: Add PMIC support   Shawn Guo
• [PATCH] ARM: dts: imx27-phytec-phycore-som: Move PMIC IRQ GPIO into a separate pin group   Shawn Guo
• [PATCH v2 1/3] ARM: dts: imx27: Use the correct usb clock gate   Shawn Guo
• [PATCH v2] ARM: dts: imx6q-gk802: Enable HDMI   Shawn Guo
• [PATCH] ARM: imx6: clk: i.MX6 DualLite/Solo i2c4 clock   Shawn Guo
• [RFC][PATCH 1/3] ARM: dts: vf610: Add Freescale FlexTimer Module timer node.   Shawn Guo
• [PATCH RFC 2/5] ata: ahci_imx: avoid reprobing ahci_imx driver when using DT   Shawn Guo
• [PATCH] ARM: imx6: clk: i.MX6 DualLite/Solo i2c4 clock   Shawn Guo
• [PATCH v2 0/2] ahci: imx: software workaround for phy reset issue   Shawn Guo
• [PATCH v2 1/2] ahci: imx: add namespace for register enums   Shawn Guo
• [PATCH v2 2/2] ahci: imx: software workaround for phy reset issue in resume   Shawn Guo
• [PATCH 0/4] ARM: imx: shared gate support for i.MX clk_gate2 clock   Shawn Guo
• [PATCH 1/4] ARM: imx: define struct clk_gate2 on our own   Shawn Guo
• [PATCH 2/4] ARM: imx: lock is always valid for clk_gate2   Shawn Guo
• [PATCH 3/4] ARM: imx: add shared gate clock support   Shawn Guo
• [PATCH 4/4] ARM: imx6q: add the missing esai_ahb clock   Shawn Guo
• [PATCH v2 1/2] ARM: dts: imx27-pdk: Add NAND support   Shawn Guo
• [PATCH v2] ARM: dts: imx6qdl-sabresd: Add HDMI support   Shawn Guo
• [PATCH] ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i   Shawn Guo
• [PATCH] ARM: i.MX: Remove #ifdef CONFIG_OF   Shawn Guo
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Shawn Guo
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Shawn Guo
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Shawn Guo
• [PATCH 0/4] ARM: imx: shared gate support for i.MX clk_gate2 clock   Shawn Guo
• [PATCH 1/2] ARM: i.MX27 clk: Add missing clocks for MSHC and RTIC   Shawn Guo
• [PATCH v3] ARM: dts: imx6qdl-sabresd: Add HDMI support   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-wandboard: Add HDMI support   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabresd: Add PCIe support   Shawn Guo
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Shawn Guo
• [PATCH 1/2] ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel   Shawn Guo
• [PATCH] mx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus'   Shawn Guo
• [PATCH] ARM: dts: imx53-qsb-common: Add TVE support   Shawn Guo
• [PATCH] ARM: dts: imx27-phytec-phycard-s-rdk: Remove 'regulator-always-on'   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-wandboard: Move FEC reset pin into the FEC pin group   Shawn Guo
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Shawn Guo
• [PATCH] ARM: dts: ventana: Add HDMI support   Shawn Guo
• [PATCH 3/3] ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx   Shawn Guo
• [PATCH 2/3] ARM: dts: imx: add LVDS backlight for Ventana   Shawn Guo
• [PATCH 8/8] ARM: dts: imx27-phytec-phycore-*: Move "iomux" node to the bottom of file   Shawn Guo
• [PATCH 1/8] ARM: dts: imx27-phytec-phycore-rdk: Remove duplicate entries for USB PHY   Shawn Guo
• [PATCH] ARM: configs: drop CONFIG_COMMON_CLK_DEBUG   Shawn Guo
• [PATCH] ARM: imx_v4_v5_defconfig: drop CONFIG_COMMON_CLK_DEBUG option   Shawn Guo
• [PATCH] ARM; i.MX: Fix eMMa PrP resource size   Shawn Guo
• [PATCH v2] ARM: dts: imx53-qsb-common: Add TVE support   Shawn Guo
• [PATCH 3/8] ARM: dts: imx6: update pcie to bring in line with new binding   Shawn Guo
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Shawn Guo
• [PATCH] ARM: imx: imx6q, Add i2c4 clock to the clock tree   Shawn Guo
• [PATCH 1/3] arm: dts: imx6qdl, remove fsl,ssi-dma-events   Shawn Guo
• [PATCH 2/3] arm: dts: imx6* Add clock-names for all ssi nodes   Shawn Guo
• [PATCH 3/3] ARM: dts: imx6dl, fix i2c4 device node   Shawn Guo
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Gupta, Pekon
• [RFC 07/47] mtd: nand: stm_nand_bch: initialise the BCH Controller   Gupta, Pekon
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Anatolij Gustschin
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Anatolij Gustschin
• [PATCH] watchdog: imx2_wdt: handle enabled watchdog properly   Anatolij Gustschin
• [PATCH] watchdog: imx2_wdt: convert to watchdog core api   Anatolij Gustschin
• [PATCH] watchdog: imx2_wdt: convert to watchdog core api   Anatolij Gustschin
• [PATCH v2] watchdog: imx2_wdt: convert to watchdog core api   Anatolij Gustschin
• [PATCH v2 1/7] drm/exynos: add super device support   Andrzej Hajda
• [PATCH v12][ 07/12] drm: drm_display_mode: add signal polarity flags   Andrzej Hajda
• [PATCH v12][ 07/12] drm: drm_display_mode: add signal polarity flags   Andrzej Hajda
• [PATCH RFC 0/3] drm/exynos: refactoring drm initialization/cleanup code   Andrzej Hajda
• [PATCH RFC 1/3] drm/exynos: refactor drm drivers registration code   Andrzej Hajda
• [PATCH RFC 2/3] drivers/base: provide lightweight framework for componentized devices   Andrzej Hajda
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Andrzej Hajda
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Andrzej Hajda
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Andrzej Hajda
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Andrzej Hajda
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Andrzej Hajda
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Andrzej Hajda
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Andrzej Hajda
• [RFC PATCH 0/4] drivers/base: Generic framework for tracking internal interfaces   Andrzej Hajda
• [RFC PATCH 1/4] drivers/base: add interface tracker framework   Andrzej Hajda
• [RFC PATCH 2/4] drm/panel: add interface tracker support   Andrzej Hajda
• [RFC PATCH 3/4] drm/exynos/dpi: add interface tracker support   Andrzej Hajda
• [RFC PATCH 4/4] drm/panel/ld9040: do not power off panel on removal   Andrzej Hajda
• [RFC PATCH 0/4] drivers/base: Generic framework for tracking internal interfaces   Andrzej Hajda
• [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible   Jingoo Han
• [PATCH RESEND] usb: ohci-exynos: Remove locks for 'ohci' in suspend callback   Jingoo Han
• [PATCH 1/2] usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails   Jingoo Han
• [PATCH 1/2] usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails   Jingoo Han
• [RFC PATCH 0/2] Add support for Samsung GH7 PCIe controller   Jingoo Han
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Jingoo Han
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Jingoo Han
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Jingoo Han
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Jingoo Han
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Jingoo Han
• [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators   Jingoo Han
• [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators   Jingoo Han
• [PATCH 2/3] usb: ehci-exynos: Make provision for vdd regulators   Jingoo Han
• [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators   Jingoo Han
• [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators   Jingoo Han
• [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators   Jingoo Han
• [PATCH 7/8] PCI: designware: make MSI isr shared irq aware   Jingoo Han
• [PATCH 1/4] usb: ohci-exynos: Use struct device instead of platform_device   Jingoo Han
• [PATCH 2/4] usb: ehci-exynos: Use struct device instead of platform_device   Jingoo Han
• [PATCH v2 01/11] base: power: Add generic OF-based power domain look-up   Ulf Hansson
• [PATCH v2 01/11] base: power: Add generic OF-based power domain look-up   Ulf Hansson
• [PATCH V2 02/19] mmc: mmci: Convert to devm functions   Ulf Hansson
• [PATCH V2 04/19] mmc: mmci: Add DT bindings for signal direction   Ulf Hansson
• [PATCH V3 00/19] mmc: mmci: Improve DT support   Ulf Hansson
• [PATCH V3 01/19] mmc: mmci: Convert to the mmc gpio API   Ulf Hansson
• [PATCH V3 02/19] mmc: mmci: Convert to devm functions   Ulf Hansson
• [PATCH V3 03/19] mmc: mmci: Update DT documentation   Ulf Hansson
• [PATCH V3 04/19] mmc: mmci: Add DT bindings for signal direction   Ulf Hansson
• [PATCH V3 05/19] mmc: mmci: Add DT bindings for feedback clock pin   Ulf Hansson
• [PATCH V3 06/19] mmc: mmci: Use the common mmc DT parser   Ulf Hansson
• [PATCH V3 07/19] ARM: ux500: Add mmci signal directions and feeback clock in DT for href   Ulf Hansson
• [PATCH V3 08/19] ARM: ux500: Convert to the common mmc DT bindings for highspeed mode   Ulf Hansson
• [PATCH V3 09/19] ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode   Ulf Hansson
• [PATCH V3 10/19] ARM: u300: Convert to the common mmc DT bindings for highspeed mode   Ulf Hansson
• [PATCH V3 11/19] mmc: mmci: Mark the DT bindings for highspeed mode as deprecated   Ulf Hansson
• [PATCH V3 12/19] mmc: mmci: Enable MMC_CAP_CMD23   Ulf Hansson
• [PATCH V3 13/19] ARM: ux500: Add the mmc capabilities flags to DT   Ulf Hansson
• [PATCH V3 14/19] ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href   Ulf Hansson
• [PATCH V3 15/19] ARM: ux500: Remove redundant board file for mmci platform data   Ulf Hansson
• [PATCH V3 16/19] mmc: mmci: Enforce DT for signal direction and feedback clock   Ulf Hansson
• [PATCH V3 17/19] mmc: mmci: Enforce mmc capabilities through DT   Ulf Hansson
• [PATCH V3 18/19] mmc: mmci: Enforce DMA configuration through DT   Ulf Hansson
• [PATCH V3 19/19] mmc: mmci: Enforce max frequency configuration through DT   Ulf Hansson
• [PATCH V3 00/19] mmc: mmci: Improve DT support   Ulf Hansson
• [PATCH 0/3] mmc: mmci: Improve system PM support   Ulf Hansson
• [PATCH 1/3] mmc: mmci: Mask IRQs for all variants during runtime suspend   Ulf Hansson
• [PATCH 2/3] mmc: mmci: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH 3/3] mmc: mmci: Put the device into low power state at system suspend   Ulf Hansson
• [PATCH] i2c: nomadik: Fixup system suspend   Ulf Hansson
• [PATCH] i2c: nomadik: Don't use IS_ERR for devm_ioremap   Ulf Hansson
• [PATCH 0/4] PM / Domains: Remove some code and APIs to simplify genpd   Ulf Hansson
• [PATCH 1/4] ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data   Ulf Hansson
• [PATCH 2/4] PM / Domains: Ignore callbacks for subsys generic_pm_domain_data   Ulf Hansson
• [PATCH 3/4] PM / Domains: Remove the pm_genpd_add|remove_callbacks APIs   Ulf Hansson
• [PATCH 4/4] PM / Domains: Remove system PM callbacks from gpd_dev_ops   Ulf Hansson
• [PATCH 1/4] ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data   Ulf Hansson
• [GIT PULL] ARM: Updates for mmci driver for 3.16, take 1   Ulf Hansson
• [PATCH] mmc: mmci: switch the driver to using gpio descriptors   Ulf Hansson
• [RFC 0/3] ARM: ux500: Add support for power domains using DT   Ulf Hansson
• [RFC 1/3] ARM: ux500: Initial support for power domains   Ulf Hansson
• [RFC PATCH 2/3] ARM: ux500: Add DT node for ux500 power domains   Ulf Hansson
• [RFC 3/3] ARM: ux500: Add sdi[n] devices to VAPE power domain   Ulf Hansson
• [PATCH 1/4] dma: ste_dma40: Maintain spinlock order while handling pause   Ulf Hansson
• [PATCH 2/4] dma: ste_dma40: Don't require CONFIG_PM_RUNTIME   Ulf Hansson
• [PATCH 3/4] dma: ste_dma40: Convert to PM macros while providing the PM callbacks   Ulf Hansson
• [PATCH 4/4] dma: ste_dma40: Fixup system suspend/resume   Ulf Hansson
• [PATCH 27/38] mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks   Ulf Hansson
• [PATCH 28/38] mmc: sdhci: remove platform_suspend/platform_resume callbacks   Ulf Hansson
• [PATCH 01/38] mmc: sdio_irq: rework sdio irq handling   Ulf Hansson
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
• [PATCH 01/38] mmc: sdio_irq: rework sdio irq handling   Ulf Hansson
• [PATCH 1/4] dma: ste_dma40: Maintain spinlock order while handling pause   Ulf Hansson
• [PATCH v3 1/3] base: power: Add generic OF-based power domain look-up   Ulf Hansson
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
• [GIT PULL] ARM: Updates for mmci driver for 3.16, take 1   Ulf Hansson
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
• [PATCH 1/4] ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data   Ulf Hansson
• [PATCH 27/38] mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks   Ulf Hansson
• [PATCH v8] mmc: moxart: Add MOXA ART SD/MMC driver   Ulf Hansson
• [PATCH/RFC 3/4] of/clk: Register clocks suitable for Runtime PM with the PM core   Ulf Hansson
• [PATCH 27/38] mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks   Ulf Hansson
• [PATCH 0/6] PM / clock_ops: Add helpers combining generic runtime and generic clock PM   Ulf Hansson
• [PATCH] PM / Sleep: Fall back to subsystem level PM callbacks for PM domains   Ulf Hansson
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Ulf Hansson
• [PATCH v3 3/3] ARM: exynos: Move to generic power domain bindings   Ulf Hansson
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Ulf Hansson
• [PATCH RESEND 1/3] mmc: mvsdio: silence card detect notice   Ulf Hansson
• [PATCH RESEND 2/3] mmc: mvsdio: workaround for spurious irqs   Ulf Hansson
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Ulf Hansson
• [PATCH 3/5] ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets   Ulf Hansson
• [PATCH 1/4] ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data   Ulf Hansson
• [PATCH] PM / Sleep: Fall back to subsystem level PM callbacks for PM domains   Ulf Hansson
• [PATCH] arm: dma-mapping: Fix mapping size value   Ritesh Harjani
• [PATCH] arm: dma-mapping: Fix mapping size value   Ritesh Harjani
• [PATCH RESEND] arm: dma-mapping: Fix mapping size value   Ritesh Harjani
• [PATCH] arm: dma-mapping: Fix mapping size value   Ritesh Harjani
• arm64: default dma_ops is set to coherent_dma_ops results into DMA FAILURE   Ritesh Harjani
• arm64: default dma_ops is set to coherent_dma_ops results into DMA FAILURE   Ritesh Harjani
• [PATCH] arm64: Make default dma_ops to be noncoherent   Ritesh Harjani
• [PATCH] arm64: Make default dma_ops to be noncoherent   Ritesh Harjani
• [PATCH] arm: dma-mapping: Fix mapping size value   Ritesh Harjani
• [PATCH] arm: dma-mapping: Fix mapping size value   Ritesh Harjani
• can problems on socfpga [was Re: [PATCH v2 4/6] ARM: socfpga: dts: add can0+1]   Oliver Hartkopp
• [PATCH] ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' property   Tim Harvey
• [PATCH] ARM: imx: propagate DI clock changes up the clock tree to PLL5   Tim Harvey
• [PATCH] ARM: imx: propagate DI clock changes up the clock tree to PLL5   Tim Harvey
• [PATCH] ARM: imx: propagate DI clock changes up the clock tree to PLL5   Tim Harvey
• [PATCH] ARM: dts: ventana: Add HDMI support   Tim Harvey
• [PATCH] ARM: dts: ventana: Add HDMI support   Tim Harvey
• [PATCH] imx-drm: fix hdmi hotplug detection initial state   Tim Harvey
• [PATCH 0/3] ARM: dts: imx: various fixes for LVDS on Ventana   Tim Harvey
• [PATCH 1/3] ARM: dts: imx: Fix LVDS mapping for Ventana GW53xx/GW54xx   Tim Harvey
• [PATCH 2/3] ARM: dts: imx: add LVDS backlight for Ventana   Tim Harvey
• [PATCH 3/3] ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx   Tim Harvey
• [PATCH] imx-drm: fix hdmi hotplug detection initial state   Tim Harvey
• [PATCH 1/2] ARM: dts: imx: add LVDS backlight for Ventana   Tim Harvey
• [PATCH 2/2] ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx   Tim Harvey
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Sascha Hauer
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Sascha Hauer
• [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Sascha Hauer
• [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Sascha Hauer
• [PATCH] mmc: Add SDIO function devicetree subnode parsing   Sascha Hauer
• [PATCH 8/8] ARM: dts: imx27-phytec-phycore-*: Move "iomux" node to the bottom of file   Sascha Hauer
• [PATCH 8/8] ARM: dts: imx27-phytec-phycore-*: Move "iomux" node to the bottom of file   Sascha Hauer
• [PATCH 0/3] ARM: PCI: implement virtual PCI host controller   Bjorn Helgaas
• [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible   Bjorn Helgaas
• [PATCH v2 3/6] PCI: rcar: use new OF interrupt mapping when possible   Bjorn Helgaas
• [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible   Bjorn Helgaas
• [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible   Bjorn Helgaas
• [PATCH v7 5/6] pci: Export find_pci_host_bridge() function.   Bjorn Helgaas
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Bjorn Helgaas
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Bjorn Helgaas
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Bjorn Helgaas
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Bjorn Helgaas
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Bjorn Helgaas
• [PATCH v7 3/3] arm64: Add architecture support for PCI   Bjorn Helgaas
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Bjorn Helgaas
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Bjorn Helgaas
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Bjorn Helgaas
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Bjorn Helgaas
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Bjorn Helgaas
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Bjorn Helgaas
• [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible   Bjorn Helgaas
• [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible   Bjorn Helgaas
• [PATCH 4/7] pci: mvebu: fix off-by-one in the computed size of the mbus windows   Bjorn Helgaas
• [PATCH 7/7] pci: pci-mvebu: split PCIe BARs into multiple MBus windows when needed   Bjorn Helgaas
• [PATCH 0/8] i.MX6 PCIe binding change and MSI support   Bjorn Helgaas
• [PATCH v7 01/10] PCI: host: rcar: Add Renesas R-Car PCIe driver   Bjorn Helgaas
• [PATCH 0/3] Versatile PCI DT support   Bjorn Helgaas
• [PATCH 1/3] ARM: hackup pcibios support for commmon bridge code   Bjorn Helgaas
• [PATCH 3/3] pci: add DT based ARM Versatile PCI host driver   Bjorn Helgaas
• [PATCH 3/3] pci: add DT based ARM Versatile PCI host driver   Bjorn Helgaas
• [PATCH 0/8] i.MX6 PCIe binding change and MSI support   Bjorn Helgaas
• [RFC 0/5] PCI: tegra: Overhaul regulator usage   Bjorn Helgaas
• [PATCH] pci-rcar-gen2: add device tree support   Bjorn Helgaas
• [PATCH v7 01/10] PCI: host: rcar: Add Renesas R-Car PCIe driver   Bjorn Helgaas
• [PATCH v3] pcie: Add Xilinx PCIe Host Bridge IP driver   Bjorn Helgaas
• [PATCH 0/2] net: Add Keystone NetCP ethernet driver support   Stephen Hemminger
• [PATCH 3.11 114/144] clocksource: vf_pit_timer: use complement for sched_clock reading   Luis Henriques
• [3.11.y.z extended stable] Patch "genirq: Allow forcing cpu affinity of interrupts" has been added to staging queue   Luis Henriques
• [3.11.y.z extended stable] Patch "irqchip: Gic: Support forced affinity setting" has been added to staging queue   Luis Henriques
• [3.11.y.z extended stable] Patch "clocksource: Exynos_mct: Register clock event after request_irq()" has been added to staging queue   Luis Henriques
• [PATCH] pata_at91: fix ata_host_activate() failure handling   Tejun Heo
• [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x   Tejun Heo
• [PATCH v2] pata_arasan_cf: fix ata_host_activate() failure handling   Tejun Heo
• [PATCH] pata_samsung_cf: fix ata_host_activate() failure handling   Tejun Heo
• [PATCH 1/2] ahci: imx: use macros to define registers and bits   Tejun Heo
• [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume   Tejun Heo
• [PATCH 1/2] ahci: imx: use macros to define registers and bits   Tejun Heo
• [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume   Tejun Heo
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Benjamin Herrenschmidt
• [PATCH v7 1/6] pci: Introduce pci_register_io_range() helper function.   Benjamin Herrenschmidt
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Benjamin Herrenschmidt
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Benjamin Herrenschmidt
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Benjamin Herrenschmidt
• [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.   Benjamin Herrenschmidt
• [PATCH] ARM: errata: workaround Cortex-A9 errata 761320 and 794072   Rob Herring
• [PATCH v2 1/3] Documentation: Add documentation for the APM X-Gene SoC RTC DTS binding   Rob Herring
• [PATCH] ARM: errata: workaround Cortex-A9 errata 761320 and 794072   Rob Herring
• [PATCH v6 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Rob Herring
• [PATCH v7 08/12] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Rob Herring
• [PATCH v7 09/12] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions   Rob Herring
• [PATCH v7 10/12] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2   Rob Herring
• [PATCH v7 00/12] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Rob Herring
• [PATCH 1/2] of: add vendor prefix for Toradex AG   Rob Herring
• [PATCH v4 1/3] i2c: cadence: Document device tree bindings   Rob Herring
• [PATCH V2 11/19] mmc: mmci: Mark the DT bindings for highspeed mode as deprecated   Rob Herring
• [PATCH V2 04/19] mmc: mmci: Add DT bindings for signal direction   Rob Herring
• [PATCH 00/20] FDT clean-ups and libfdt support   Rob Herring
• [PATCH 05/20] ARM: dt: use default early_init_dt_alloc_memory_arch   Rob Herring
• [PATCH 1/5] DT: Vendor: Add prefixes used by Kirkwood devices   Rob Herring
• [PATCH] of: Fix the section mismatch warnings.   Rob Herring
• [PATCH 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller   Rob Herring
• [PATCH] driver: clocksource: fix age-old arch timer C3STOP detection issue   Rob Herring
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Rob Herring
• [PATCH 4/4] arm: mediatek: Add earlyprintk support for MT6589   Rob Herring
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Rob Herring
• [PATCH] dt-bindings: add vendor-prefix for Newhaven Display   Rob Herring
• [PATCH] of: add vendor prefix for I2SE GmbH   Rob Herring
• [PATCH 1/2] ARM: dt-binding: fix GIC example   Rob Herring
• [PATCH RFC v5 2/2] clk: Add handling of clk parent and rate assigned from DT   Rob Herring
• [PATCH] ARM: topology: Make it clear that all CPUs need to be described   Rob Herring
• [PATCH] ARM: topology: Make it clear that all CPUs need to be described   Rob Herring
• [PATCH 1/2] ARM: dt-binding: fix GIC example   Rob Herring
• [PATCH 1/2] ARM: dt-binding: fix GIC example   Rob Herring
• [PATCH 1/6] ARM: dts: keystone: drop address and size cells from GIC node   Rob Herring
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Rob Herring
• [PATCH] ARM: fix missing CLKSRC_OF on multi-platform   Rob Herring
• [PATCH] ARM: mach-mxs: readd just removed select CLKSRC_OF   Rob Herring
• [PATCH 04/12] clocksource: Sched clock source for Versatile Express   Rob Herring
• [PATCH] ARM: efm32: drop selecting CLKSRC_MMIO   Rob Herring
• [PATCH 04/12] clocksource: Sched clock source for Versatile Express   Rob Herring
• [PATCH Resend] ARM: EXYNOS: Map SYSRAM address through DT   Rob Herring
• [PATCH 4/5] exynos4-is: Remove requirement for "simple-bus" compatible   Rob Herring
• [PATCH] clocksource: efm32: let CLKSRC_EFM32 select CLKSRC_OF   Rob Herring
• [PATCH 6/8] tty/serial: pl011: add generic earlycon support   Rob Herring
• [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum   Rob Herring
• [PATCH] clocksource: efm32: let CLKSRC_EFM32 select CLKSRC_OF   Rob Herring
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Rob Herring
• Change of TEXT_OFFSET for multi_v7_defconfig   Rob Herring
• [PATCH 4/8] tty/serial: add generic serial earlycon   Rob Herring
• Change of TEXT_OFFSET for multi_v7_defconfig   Rob Herring
• Change of TEXT_OFFSET for multi_v7_defconfig   Rob Herring
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Rob Herring
• [PATCH v2 0/7] Generic serial earlycon   Rob Herring
• [PATCH v2 1/7] x86: move FIX_EARLYCON_MEM kconfig into x86   Rob Herring
• [PATCH v2 2/7] tty/serial: add generic serial earlycon   Rob Herring
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Rob Herring
• [PATCH v2 4/7] tty/serial: pl011: add generic earlycon support   Rob Herring
• [PATCH v2 5/7] tty/serial: add arm/arm64 semihosting earlycon   Rob Herring
• [PATCH v2 6/7] arm64: enable FIX_EARLYCON_MEM kconfig   Rob Herring
• [PATCH v2 7/7] arm64: remove arch specific earlyprintk   Rob Herring
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Rob Herring
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Rob Herring
• [PATCH v2 4/7] of: configure the platform device dma parameters   Rob Herring
• [PATCH v2 2/7] of: introduce of_dma_get_range() helper   Rob Herring
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Rob Herring
• [PATCH v3] arm64: enable EDAC on arm64   Rob Herring
• [PATCH v2] arm64: enable EDAC on arm64   Rob Herring
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Rob Herring
• [PATCH v3] arm64: enable EDAC on arm64   Rob Herring
• [PATCH v3 2/3] dma: Add Xilinx Video DMA DT Binding Documentation   Rob Herring
• [PATCH v2 4/7] of: configure the platform device dma parameters   Rob Herring
• [PATCH v3] arm64: enable EDAC on arm64   Rob Herring
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Rob Herring
• [RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support   Rob Herring
• [PATCH v3] arm64: enable EDAC on arm64   Rob Herring
• [PATCH] ARM: berlin: add CPU_V7 to Marvell Armada 1500-mini (BG2CD)   Rob Herring
• [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs   Rob Herring
• [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs   Rob Herring
• [PATCH 0/3] ARM mach Kconfig clean-ups   Rob Herring
• [PATCH 1/3] ARM: mvebu: clean-up unneeded kconfig selects   Rob Herring
• [PATCH 2/3] ARM: bcm: clean-up unneeded kconfig selects   Rob Herring
• [PATCH 3/3] ARM: qcom: clean-up unneeded kconfig selects   Rob Herring
• [PATCH 1/3] ARM: mvebu: clean-up unneeded kconfig selects   Rob Herring
• [PATCH v2 00/21] FDT clean-ups and libfdt support   Rob Herring
• [PATCH v2 05/21] ARM: dt: use default early_init_dt_alloc_memory_arch   Rob Herring
• kdump for ARM Linux?   Rob Herring
• [PATCH 22/33] ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings   Rob Herring
• [PATCH v6 1/3] PSCI: Add initial support for PSCIv0.2 functions   Rob Herring
• [PATCH] ARM: sunxi: dt: list all pinctrl compatible strings   Rob Herring
• [PATCH v6 1/3] PSCI: Add initial support for PSCIv0.2 functions   Rob Herring
• kdump for ARM Linux?   Rob Herring
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Rob Herring
• [PATCH 0/2] DT irq deferred probe support   Rob Herring
• [PATCH 1/2] of: selftest: add deferred probe interrupt test   Rob Herring
• [PATCH 2/2] of/irq: do irq resolution in platform_get_irq   Rob Herring
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Rob Herring
• [PATCH v6 3/3] ARM: Check if a CPU has gone offline   Rob Herring
• [PATCH 3/3] pci: add DT based ARM Versatile PCI host driver   Rob Herring
• [PATCH 1/3] ARM: hackup pcibios support for commmon bridge code   Rob Herring
• [PATCH v7 3/3] ARM: Check if a CPU has gone offline   Rob Herring
• [PATCH 0/3] arm64: Default to non-coherent DMA ops   Rob Herring
• [PATCH] clkdev: only fall through to clk_get_sys() if DT indicates no entry   Rob Herring
• [PATCH 02/16] ARM: l2c: add platform independent core L2 cache initialisation   Rob Herring
• [PATCH 01/10] of: Keep track of populated platform devices   Rob Herring
• [PATCH 02/16] ARM: l2c: add platform independent core L2 cache initialisation   Rob Herring
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Rob Herring
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Rob Herring
• [PATCH] arm64: fixmap: fix missing sub-page offset for earlyprintk   Rob Herring
• [PATCH v2 0/7] Generic serial earlycon   Rob Herring
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Rob Herring
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Rob Herring
• [PATCH v4 05/14] irq: gic: support hip04 gic   Rob Herring
• Fwd: [PATCH v4 02/14] ARM: append ARCH_MULTI_V7_LPAE   Rob Herring
• [PATCH v4 09/14] ARM: dts: add hip04-d01 dts file   Rob Herring
• [PATCH v2] of: Keep track of populated platform devices   Rob Herring
• [PATCH 2/3] ARM: dts: document the berlin enable-method property   Sebastian Hesselbarth
• [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH RESEND 3/5] ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH RESEND 4/5] Documentation: add the Marvell Berlin pinctrl documentation   Sebastian Hesselbarth
• [PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts   Sebastian Hesselbarth
• [PATCH RESEND 1/5] pinctrl: allows not to define the get_group_pins operation   Sebastian Hesselbarth
• [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Sebastian Hesselbarth
• [PATCH 01/29] ARM: orion5x: fix target ID for crypto SRAM window   Sebastian Hesselbarth
• [PATCH 02/29] pinctrl: mvebu: new driver for Orion platforms   Sebastian Hesselbarth
• [PATCH 03/29] clk: mvebu: add Orion5x clock driver   Sebastian Hesselbarth
• [PATCH 04/29] memory: mvebu-devbus: fix the conversion of the bus width   Sebastian Hesselbarth
• [PATCH 05/29] memory: mvebu-devbus: use ARMADA_ prefix in defines   Sebastian Hesselbarth
• [PATCH 06/29] memory: mvebu-devbus: split functions   Sebastian Hesselbarth
• [PATCH 07/29] memory: mvebu-devbus: add Orion5x support   Sebastian Hesselbarth
• [PATCH 08/29] ARM: orion5x: move interrupt controller node into ocp   Sebastian Hesselbarth
• [PATCH 09/29] ARM: orion5x: switch to preprocessor includes in DT   Sebastian Hesselbarth
• [PATCH 10/29] ARM: orion5x: use existing dt-bindings include for Device Tree files   Sebastian Hesselbarth
• [PATCH 11/29] ARM: orion5x: convert DT to use the mvebu-mbus driver   Sebastian Hesselbarth
• [PATCH 12/29] ARM: orion5x: add interrupt for Ethernet in Device Tree   Sebastian Hesselbarth
• [PATCH 13/29] ARM: orion5x: switch to use the clock driver for DT platforms   Sebastian Hesselbarth
• [PATCH 14/29] ARM: orion: switch to a per-platform handle_irq() function   Sebastian Hesselbarth
• [PATCH 15/29] ARM: orion5x: switch to DT interrupts and timer   Sebastian Hesselbarth
• [PATCH 16/29] ARM: orion5x: enable pinctrl driver at SoC level   Sebastian Hesselbarth
• [PATCH 17/29] ARM: orion5x: update I2C description at SoC level   Sebastian Hesselbarth
• [PATCH 18/29] ARM: orion5x: add Device Bus description at SoC level   Sebastian Hesselbarth
• [PATCH 19/29] ARM: orion5x: add standard pinctrl configs for sata0 and sata1   Sebastian Hesselbarth
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Sebastian Hesselbarth
• [PATCH 21/29] ARM: orion5x: use DT to describe I2C devices on edmini_v2   Sebastian Hesselbarth
• [PATCH 22/29] ARM: orion5x: use DT to describe EHCI on edmini_v2   Sebastian Hesselbarth
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Sebastian Hesselbarth
• [PATCH 24/29] ARM: orion5x: keep TODO list in edmini_v2 DT   Sebastian Hesselbarth
• [PATCH 25/29] ARM: orion5x: remove unneeded code for edmini_v2   Sebastian Hesselbarth
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Sebastian Hesselbarth
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Sebastian Hesselbarth
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Sebastian Hesselbarth
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Sebastian Hesselbarth
• [PATCH 1/2] ARM: berlin: add the LIBGPIO as a dependency for the BG2Q   Sebastian Hesselbarth
• [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q   Sebastian Hesselbarth
• [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q   Sebastian Hesselbarth
• [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q   Sebastian Hesselbarth
• [PATCH 0/5] fixing regressions caused by Dove in MULTI_V7   Sebastian Hesselbarth
• [PATCH 1/5] ARM: iwmmxt: explicitly check for supported architectures   Sebastian Hesselbarth
• [PATCH 2/5] ARM: pj4: enable iWMMXt only if CONFIG_IWMMXT is set   Sebastian Hesselbarth
• [PATCH 3/5] ARM: pj4: properly detect existence of iWMMXt coprocessor   Sebastian Hesselbarth
• [PATCH 4/5] ARM: pj4: fix cpu_is_pj4 check   Sebastian Hesselbarth
• [PATCH 5/5] ARM: iwmmxt: allow to build iWMMXt on Marvell PJ4B   Sebastian Hesselbarth
• [PATCH v2 4/5] mmc: dove: prepare new Dove DT Kconfig variable   Sebastian Hesselbarth
• [PATCH] ARM: berlin: add CPU_V7 to Marvell Armada 1500-mini (BG2CD)   Sebastian Hesselbarth
• [PATCH 2/2] ARM: multi_v7_defconfig: Select CONFIG_MACH_BERLIN_BG2Q   Sebastian Hesselbarth
• [PATCH 1/4] mmc: sdhci: add a driver for Berlin SoCs   Sebastian Hesselbarth
• [PATCH 5/6] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Sebastian Hesselbarth
• [PATCH 1/2] ARM: berlin: add scu and chipctrl device nodes for BG2/BG2Q   Sebastian Hesselbarth
• [PATCH 2/2] ARM: berlin: add SMP support   Sebastian Hesselbarth
• [PATCH v2 0/2] ARM: berlin: add GPIO support for the BG2Q   Sebastian Hesselbarth
• [PATCH 3/4] ARM: dts: berlin: add the SDHCI nodes for the BG2Q   Sebastian Hesselbarth
• [PATCH RESEND 3/5] ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code   Sebastian Hesselbarth
• [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support   Sebastian Hesselbarth
• [PATCH 5/8] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x   Sebastian Hesselbarth
• [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code   Sebastian Hesselbarth
• [PATCH 14/29] ARM: orion: switch to a per-platform handle_irq() function   Sebastian Hesselbarth
• [PATCH 17/29] ARM: orion5x: update I2C description at SoC level   Sebastian Hesselbarth
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Sebastian Hesselbarth
• [PATCH 14/29] ARM: orion: switch to a per-platform handle_irq() function   Sebastian Hesselbarth
• [PATCH 02/29] pinctrl: mvebu: new driver for Orion platforms   Sebastian Hesselbarth
• [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs   Sebastian Hesselbarth
• [PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform   Sebastian Hesselbarth
• [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q   Sebastian Hesselbarth
• [PATCH v2 1/2] ARM: dts: berlin: add the SDHCI nodes for the BG2Q   Sebastian Hesselbarth
• [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD   Sebastian Hesselbarth
• [PATCH] ARM: berlin: add CPU_V7 to Marvell Armada 1500-mini (BG2CD)   Sebastian Hesselbarth
• [PATCH] ARM: berlin: add CPU_V7 to Marvell Armada 1500-mini (BG2CD)   Sebastian Hesselbarth
• [PATCH] ARM: berlin: add CPU_V7 to Marvell Armada 1500-mini (BG2CD)   Sebastian Hesselbarth
• [PATCH 1/2] ARM: berlin: add MACH_BERLIN_BG2Q symbol   Sebastian Hesselbarth
• [PATCH v2 03/38] pinctrl: mvebu: new driver for Orion platforms   Sebastian Hesselbarth
• [PATCH v2 04/38] clk: mvebu: add Orion5x clock driver   Sebastian Hesselbarth
• [PATCH v2 05/38] memory: mvebu-devbus: use ARMADA_ prefix in defines   Sebastian Hesselbarth
• [PATCH v2 06/38] memory: mvebu-devbus: use _SHIFT suffixes instead of _BIT   Sebastian Hesselbarth
• [PATCH v2 07/38] memory: mvebu-devbus: split functions   Sebastian Hesselbarth
• [PATCH v2 08/38] memory: mvebu-devbus: add Orion5x support   Sebastian Hesselbarth
• [PATCH v2 09/38] memory: mvebu-devbus: add a devbus,keep-config property   Sebastian Hesselbarth
• [PATCH v2 13/38] ARM: orion5x: convert DT to use the mvebu-mbus driver   Sebastian Hesselbarth
• [PATCH v2 14/38] ARM: orion5x: add node labels in Orion5x SoC Device Tree file   Sebastian Hesselbarth
• [PATCH v2 15/38] ARM: orion5x: use gpio-keys and gpio-leds instead of gpio_keys/gpio_leds in edmini_v2   Sebastian Hesselbarth
• [PATCH v2 16/38] ARM: orion5x: add linux, stdout-path to edmini_v2   Sebastian Hesselbarth
• [PATCH v2 17/38] ARM: orion5x: use node labels for UART and SATA on edmini_v2   Sebastian Hesselbarth
• [PATCH v2 21/38] ARM: orion5x: convert to use 'clocks' property for UART controllers   Sebastian Hesselbarth
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Sebastian Hesselbarth
• [PATCH v2 23/38] ARM: orion5x: switch to DT interrupts and timer   Sebastian Hesselbarth
• [PATCH v2 28/38] ARM: orion5x: convert edmini_v2 to DT pinctrl   Sebastian Hesselbarth
• [PATCH v2 29/38] ARM: orion5x: use DT to describe I2C devices on edmini_v2   Sebastian Hesselbarth
• [PATCH v2 30/38] ARM: orion5x: use DT to describe EHCI on edmini_v2   Sebastian Hesselbarth
• [PATCH v2 31/38] ARM: orion5x: use DT to describe NOR on edmini_v2   Sebastian Hesselbarth
• [PATCH v2 32/38] ARM: orion5x: keep TODO list in edmini_v2 DT   Sebastian Hesselbarth
• [PATCH v2 34/38] ARM: orion5x: convert RD-88F5182 to Device Tree   Sebastian Hesselbarth
• [PATCH v2 35/38] ARM: orion5x: convert d2net to Device Tree   Sebastian Hesselbarth
• [PATCH v2 36/38] ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree   Sebastian Hesselbarth
• [PATCH v2 37/38] ARM: orion: remove no longer needed DT IRQ code   Sebastian Hesselbarth
• [PATCH v2 38/38] ARM: orion: remove no longer needed gpio DT code   Sebastian Hesselbarth
• [PATCH v2 00/38] ARM: orion5x: big step towards DT conversion   Sebastian Hesselbarth
• [PATCH 1/5] clk: berlin: add support for clocks   Sebastian Hesselbarth
• [PATCH 1/5] clk: berlin: add support for clocks   Sebastian Hesselbarth
• [PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation   Sebastian Hesselbarth
• [PATCH v2 2/2] ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP   Sebastian Hesselbarth
• [PATCH v2 2/2] ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP   Sebastian Hesselbarth
• [PATCH v2 0/7] ARM: berlin: add pinctrl support   Sebastian Hesselbarth
• [PATCH v2 1/7] pinctrl: berlin: add the core pinctrl driver for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH v2 2/7] pinctrl: berlin: add the BG2Q pinctrl driver   Sebastian Hesselbarth
• [PATCH v2 3/7] pinctrl: berlin: add the BG2 pinctrl driver   Sebastian Hesselbarth
• [PATCH v2 4/7] pinctrl: berlin: add the BG2CD pinctrl driver   Sebastian Hesselbarth
• [PATCH v2 6/7] Documentation: add the Marvell Berlin pinctrl documentation   Sebastian Hesselbarth
• [PATCH v2 7/7] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts   Sebastian Hesselbarth
• [PATCH v2 0/7] ARM: berlin: add pinctrl support   Sebastian Hesselbarth
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Sebastian Hesselbarth
• [PATCH RESEND 0/3] Orion irqchip and Kirkwood SDIO   Sebastian Hesselbarth
• [PATCH RESEND 1/3] mmc: mvsdio: silence card detect notice   Sebastian Hesselbarth
• [PATCH RESEND 2/3] mmc: mvsdio: workaround for spurious irqs   Sebastian Hesselbarth
• [PATCH RESEND 3/3] irqchip: orion: reverse irq handling priority   Sebastian Hesselbarth
• [PATCH RFC 0/5] Dove PMU support   Sebastian Hesselbarth
• [PATCH RESEND 3/3] irqchip: orion: reverse irq handling priority   Sebastian Hesselbarth
• [PATCH v2 3/3] irqchip: orion: reverse irq handling priority   Sebastian Hesselbarth
• [PATCH RFC 0/5] Dove PMU support   Sebastian Hesselbarth
• [PATCH for v3.15] net: mvmdio: Check for a valid interrupt instead of an error   Sebastian Hesselbarth
• [PATCH 97/97] ARM: l2c: convert berlin to generic l2c initialisation   Sebastian Hesselbarth
• [PATCH 00/15] Kirkwood DT fix and cleanup round 1   Sebastian Hesselbarth
• [PATCH 01/15] ARM: dts: kirkwood: fix mislocated pcie-controller nodes   Sebastian Hesselbarth
• [PATCH 02/15] ARM: dts: kirkwood: add node labels   Sebastian Hesselbarth
• [PATCH 03/15] ARM: dts: kirkwood: add stdout-path property to all boards   Sebastian Hesselbarth
• [PATCH 04/15] ARM: dts: kirkwood: remove clock-frequency properties from UART nodes   Sebastian Hesselbarth
• [PATCH 05/15] ARM: dts: kirkwood: rename pin-controller nodes   Sebastian Hesselbarth
• [PATCH 06/15] ARM: dts: kirkwood: add pinctrl node to common SoC include   Sebastian Hesselbarth
• [PATCH 07/15] ARM: dts: kirkwood: consolidate common pinctrl settings   Sebastian Hesselbarth
• [PATCH 08/15] ARM: dts: kirkwood: set default pinctrl for GBE1   Sebastian Hesselbarth
• [PATCH 09/15] ARM: dts: kirkwood: set default pinctrl for UART0/1   Sebastian Hesselbarth
• [PATCH 10/15] ARM: dts: kirkwood: set default pinctrl for SPI0   Sebastian Hesselbarth
• [PATCH 11/15] ARM: dts: kirkwood: set default pinctrl for NAND   Sebastian Hesselbarth
• [PATCH 12/15] ARM: dts: kirkwood: set default pinctrl for I2C0   Sebastian Hesselbarth
• [PATCH 13/15] ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282   Sebastian Hesselbarth
• [PATCH 14/15] ARM: dts: kirkwood: set Guruplug ethernet PHY compatible   Sebastian Hesselbarth
• [PATCH 15/15] ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id   Sebastian Hesselbarth
• [PATCH for v3.15] net: mvmdio: Check for a valid interrupt instead of an error   Sebastian Hesselbarth
• [PATCH 07/15] ARM: dts: kirkwood: consolidate common pinctrl settings   Sebastian Hesselbarth
• [PATCH 03/15] ARM: dts: kirkwood: add stdout-path property to all boards   Sebastian Hesselbarth
• [PATCH 07/15] ARM: dts: kirkwood: consolidate common pinctrl settings   Sebastian Hesselbarth
• [RFC 0/3] DRM driver for the ATMEL High end LCD controller   Jean-Jacques Hiblot
• [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller   Jean-Jacques Hiblot
• [RFC 2/3] atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5   Jean-Jacques Hiblot
• [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek   Jean-Jacques Hiblot
• [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller   Jean-Jacques Hiblot
• [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek   Jean-Jacques Hiblot
• [RFC 0/3] DRM driver for the ATMEL High end LCD controller   Jean-Jacques Hiblot
• [RFC 0/3] DRM driver for the ATMEL High end LCD controller   Jean-Jacques Hiblot
• [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller   Jean-Jacques Hiblot
• [ARM ATTEND] DeviceTree status   Kevin Hilman
• [PATCH v7 0/3] Exynos 5410 support   Kevin Hilman
• [PATCH 1/2] ARM: add cpu_is_pj4() to distinguish PJ4 core   Kevin Hilman
• [PATCH v1 6/8] ARM: hisi: add hip04 SoC support   Kevin Hilman
• [PATCH 0/5] fixing regressions caused by Dove in MULTI_V7   Kevin Hilman
• L2C boot crash on BCM Capri (was: next boot: 47 pass, 2 fail (next-20140424))   Kevin Hilman
• L2C boot crash on BCM Capri   Kevin Hilman
• [PATCH v3] gpio: omap: implement get_direction   Kevin Hilman
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Kevin Hilman
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Kevin Hilman
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Kevin Hilman
• [PATCH 000/222] The *Full* Cubox-i series   Kevin Hilman
• [PATCH v8 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Kevin Hilman
• [PATCH v8 0/3] Exynos 5410 support   Kevin Hilman
• [PATCH/RFC 3/4] of/clk: Register clocks suitable for Runtime PM with the PM core   Kevin Hilman
• [ANNOUNCE / UPDATE]: ARM mini-summit at ELC changed to BoFs (+ hack day)   Kevin Hilman
• [PATCH] ARM: mach-mxs: readd just removed select CLKSRC_OF   Lauri Hintsala
• [PATCH v3 0/3] rtc: Add APM X-Gene SoC RTC driver   Loc Ho
• [PATCH v3 1/3] Documentation: Add documentation for the APM X-Gene SoC RTC DTS binding   Loc Ho
• [PATCH v3 2/3] rtc: Add APM X-Gene SoC RTC driver   Loc Ho
• [PATCH v3 3/3] arm64: Add APM X-Gene SoC RTC DTS entry   Loc Ho
• [rtc-linux] [PATCH v3 2/3] rtc: Add APM X-Gene SoC RTC driver   Loc Ho
• [PATCH v4 0/3] rtc: Add APM X-Gene SoC RTC driver   Loc Ho
• [PATCH v4 1/3] Documentation: Add documentation for the APM X-Gene SoC RTC DTS binding   Loc Ho
• [PATCH v4 2/3] rtc: Add APM X-Gene SoC RTC driver   Loc Ho
• [PATCH v4 3/3] arm64: Add APM X-Gene SoC RTC DTS entry   Loc Ho
• [PATCH v4 2/3] rtc: Add APM X-Gene SoC RTC driver   Loc Ho
• [PATCH] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver   Loc Ho
• [rtc-linux] [PATCH] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver   Loc Ho
• [PATCH v2] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver   Loc Ho
• [PATCH v18 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Loc Ho
• [PATCH 0/3] asm-generic: Add renameat2, drop renameat by default   James Hogan
• [PATCH 1/3] asm-generic: Add renameat2 syscall   James Hogan
• [RFC 3/3] asm-generic: Drop renameat syscall from default list   James Hogan
• [RFC 3/3] asm-generic: Drop renameat syscall from default list   James Hogan
• [PATCH v2] ARM: perf: save/restore pmu registers in pm notifier   Sudeep Holla
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Sudeep Holla
• [PATCH] arm: don't allow CONFIG_DEBUG_SET_MODULE_RONX if CONFIG_JUMP_LABEL is enabled   Alexander Holler
• [PATCH] arm: don't allow CONFIG_DEBUG_SET_MODULE_RONX if CONFIG_JUMP_LABEL is enabled   Alexander Holler
• [PATCH] arm: don't allow CONFIG_DEBUG_SET_MODULE_RONX if CONFIG_JUMP_LABEL is enabled   Alexander Holler
• [PATCH] ARM: shmobile: lager: Correct setting of ethernet PHY LED mode   Simon Horman
• [PATCH] ARM: shmobile: r8a7791: Add EHCI MSTP clock   Simon Horman
• [PATCH] ARM: shmobile: lager: Correct setting of ethernet PHY LED mode   Simon Horman
• [PATCH 2/2] pwm: use PWM_LOOKUP to set the period and polarity   Simon Horman
• [PATCH] ARM: shmobile: Enable USB [EO]HCI HCD support in shmobile_defconfig   Simon Horman
• [PATCH v2 5/5] ARM: shmobile: r8a7790: add IIC(B) cores to dtsi   Simon Horman
• [PATCH v2 4/5] ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi   Simon Horman
• [PATCH v2 3/5] ARM: shmobile: r8a7790: add IIC0-2 clock macros   Simon Horman
• [PATCH] ARM: shmobile: Enable USB [EO]HCI HCD support in shmobile_defconfig   Simon Horman
• [PATCH 6/6] ARM: dts: sh: drop address cells from GIC node   Simon Horman
• [PATCH 1/4] ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data   Simon Horman
• [PATCH 2/2] pwm: use PWM_LOOKUP to set the period and polarity   Simon Horman
• [GIT PULL] Fifth Round of Renesas ARM Based SoC DT Updates for v3.15   Simon Horman
• [PATCH] ARM: shmobile: lager: correct renesas, gpios to renesas, groups in sd[02] pfc   Simon Horman
• [PATCH v2 6/6] ARM: shmobile: sh73a0: drop address cells from GIC node   Simon Horman
• [PATCH v2 5/6] ARM: shmobile: r8a7740: drop address cells from GIC node   Simon Horman
• [PATCHv2 02/11] ARM: shmobile: Armadillo 800 EVA: initialize all struct pwm_lookup members   Simon Horman
• [PATCHv2 07/11] ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup   Simon Horman
• Renesas clock clk-mstp updates for clock-indices   Simon Horman
• Renesas clock clk-mstp updates for clock-indices   Simon Horman
• [PATCH v5 00/20] ARM: shmobile: r8a7779, marzen: CCF and multiplatform   Simon Horman
• [PATCH v5 01/20] clk: shmobile: r8a7779: Add clocks support   Simon Horman
• [PATCH v5 02/20] clk: shmobile: r8a7779: Add MSTP clock support   Simon Horman
• [PATCH v5 03/20] ARM: shmobile: r8a7779: Add clock index macros for DT sources   Simon Horman
• [PATCH v5 04/20] ARM: shmobile: r8a7779: Add clocks   Simon Horman
• [PATCH v5 05/20] ARM: shmobile: Sync Marzen DTS with Marzen reference DTS   Simon Horman
• [PATCH v5 06/20] ARM: shmobile: marzen: Specify external clock frequency in DT   Simon Horman
• [PATCH v5 07/20] ARM: shmobile: r8a7779: Reference clocks   Simon Horman
• [PATCH v5 08/20] ARM: shmobile: r8a7779: Add helper to read mode pins   Simon Horman
• [PATCH v5 09/20] ARM: shmobile: r8a7779: Move r8a7779_earlytimer_init to clock-r8a7779.c   Simon Horman
• [PATCH v5 10/20] ARM: shmobile: marzen-reference: Move clock and OF device initialisation into board code   Simon Horman
• [PATCH v5 11/20] ARM: shmobile: r8a7779: Do not include sh_clk.h in r8a7779.h   Simon Horman
• [PATCH v5 12/20] ARM: shmobile: r8a7779: Initial multiplatform support   Simon Horman
• [PATCH v5 13/20] ARM: shmobile: marzen-reference: Initialize CPG device   Simon Horman
• [PATCH v5 14/20] ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and TMU   Simon Horman
• [PATCH v5 15/20] ARM: shmobile: marzen-reference: Work around core clock issues   Simon Horman
• [PATCH v5 16/20] ARM: shmobile: marzen: Add to shmobile defconfig   Simon Horman
• [PATCH v5 17/20] ARM: shmobile: Remove non-multiplatform Marzen reference support   Simon Horman
• [PATCH v5 18/20] ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB   Simon Horman
• [PATCH v5 19/20] ARM: shmobile: Remove Marzen reference DTS   Simon Horman
• [PATCH v5 20/20] ARM: shmobile: marzen-reference: Remove legacy clock support   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v3.16   Simon Horman
• [PATCH 1/7] ARM: shmobile: multiplatform: Enable MSIOF in defconfig   Simon Horman
• [PATCH 2/7] ARM: shmobile: Include i2c-shmobile.c in shmobile_defconfig   Simon Horman
• [PATCH 3/7] ARM: shmobile: Include at24.c in shmobile_defconfig   Simon Horman
• [PATCH 4/7] ARM: shmobile: Enable USBHS gadget support in shmobile_defconfig   Simon Horman
• [PATCH 5/7] ARM: shmobile: Enable HIGHMEM in shmobile_defconfig   Simon Horman
• [PATCH 6/7] ARM: shmobile: Enable VSP1 in shmobile_defconfig   Simon Horman
• [PATCH 7/7] ARM: shmobile: Enable USB [EO]HCI HCD support in shmobile_defconfig   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Updates for v3.16   Simon Horman
• [PATCH 1/8] ARM: shmobile: Update r8a7791 CPU freq to 1500MHz in C   Simon Horman
• [PATCH 2/8] ARM: shmobile: Add shared shmobile_init_delay()   Simon Horman
• [PATCH 3/8] ARM: shmobile: Remove legacy EMEV2 SoC support   Simon Horman
• [PATCH 4/8] ARM: shmobile: Remove EMEV2 header file   Simon Horman
• [PATCH 5/8] ARM: shmobile: Make use of r8a7790_add_standard_devices()   Simon Horman
• [PATCH 6/8] ARM: shmobile: rcar-gen2: Cache Mode Monitor Register Value   Simon Horman
• [PATCH 7/8] ARM: shmobile: Check r8a7791 MD21 at SMP boot   Simon Horman
• [PATCH 8/8] ARM: shmobile: r8a7778/bockw: Move "select RENESAS_INTC_IRQPIN" under SoC   Simon Horman
• Renesas clock clk-mstp updates for clock-indices   Simon Horman
• [PATCH v5 08/20] ARM: shmobile: r8a7779: Add helper to read mode pins   Simon Horman
• [PATCH v5 08/20] ARM: shmobile: r8a7779: Add helper to read mode pins   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Clock Updates for v3.16   Simon Horman
• [PATCH 1/8] ARM: shmobile: r8a7791: Use rcar_gen2_read_mode_pins() helper   Simon Horman
• [PATCH 2/8] ARM: shmobile: Introduce shmobile_clk_workaround()   Simon Horman
• [PATCH 3/8] ARM: shmobile: r8a7790: Fix the I2C clocks parents in legacy code   Simon Horman
• [PATCH 4/8] ARM: shmobile: r8a7791: Fix the I2C clocks parents in legacy code   Simon Horman
• [PATCH 5/8] ARM: shmobile: r8a7790: Rename VSP1_(SY|RT) clocks to VSP1_(S|R)   Simon Horman
• [PATCH 6/8] ARM: shmobile: r8a7791: Rename VSP1_SY clocks to VSP1_S   Simon Horman
• [PATCH 7/8] ARM: shmobile: r8a7778: remove old style audio clock   Simon Horman
• [PATCH 8/8] ARM: shmobile: r8a7790: remove old style audio clock   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Fixes Updates for v3.15   Simon Horman
• [PATCH 1/5] ARM: shmobile: lager: fixup SND_SOC_DAIFMT_CBx_CFx flags   Simon Horman
• [PATCH 2/5] ARM: shmobile: armadillo800eva: fixup SND_SOC_DAIFMT_CBx_CFx flags   Simon Horman
• [PATCH 3/5] ARM: shmobile: sh73a0: drop address cells from GIC node   Simon Horman
• [PATCH 4/5] ARM: shmobile: r8a7740: drop address cells from GIC node   Simon Horman
• [PATCH 5/5] ARM: shmobile: koelsch: correct renesas, gpios to renesas, groups in sd[012] pfc   Simon Horman
• [PATCH 01/14] ARM: shmobile: Use shmobile_clk_workaround() on Lager   Simon Horman
• [PATCH 02/14] ARM: shmobile: Use shmobile_clk_workaround() on Koelsch   Simon Horman
• [PATCH 03/14] ARM: shmobile: koelsch: Annotate clk_names with __initconst   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Boards Updates for v3.16   Simon Horman
• [PATCH 04/14] ARM: shmobile: lager: Annotate clk_names with __initconst   Simon Horman
• [PATCH 05/14] ARM: shmobile: koelsch-reference: Work around core clock issues   Simon Horman
• [PATCH 06/14] ARM: shmobile: koelsch-reference: Annotate clk_enables as __initconst   Simon Horman
• [PATCH 07/14] ARM: shmobile: lager-reference: Work around core clock issues   Simon Horman
• [PATCH 08/14] ARM: shmobile: Add Lager clock workarounds for SDHI and MMCIF   Simon Horman
• [PATCH 09/14] ARM: shmobile: Add Koelsch clock workarounds for SDHI   Simon Horman
• [PATCH 10/14] ARM: shmobile: bockw: remove old style audio clock   Simon Horman
• [PATCH 11/14] ARM: shmobile: bockw: switch to use dai info for R-Car sound   Simon Horman
• [PATCH 12/14] ARM: shmobile: lager: switch to use dai info for R-Car sound   Simon Horman
• [PATCH 13/14] ARM: shmobile: koelsch legacy: Enable Quad SPI transfers for the SPI FLASH   Simon Horman
• [PATCH 14/14] ARM: shmobile: lager legacy: Enable Quad SPI transfers for the SPI FLASH   Simon Horman
• [PATCH v6 0/2] clk: shmobile: r8a7779: Add clocks support   Simon Horman
• [PATCH v6 1/2] clk: shmobile: r8a7779: Add clocks support   Simon Horman
• [PATCH v6 2/2] clk: shmobile: r8a7779: Add MSTP clock support   Simon Horman
• [PATCH 05/14] ARM: shmobile: koelsch-reference: Work around core clock issues   Simon Horman
• [PATCH 01/33] ARM: shmobile: Update r8a7791 CPU freq to 1500MHz in DTS   Simon Horman
• [PATCH 02/33] ARM: shmobile: r8a7790/lager dts: Rename label spi to qspi, add spi0 alias   Simon Horman
• [PATCH 03/33] ARM: shmobile: r8a7791/koelsch dts: Rename label spi to qspi, add spi0 alias   Simon Horman
• [PATCH 04/33] ARM: shmobile: r8a7790 dtsi: Add MSIOF nodes and aliases   Simon Horman
• [PATCH 05/33] ARM: shmobile: r8a7791 dtsi: Add MSIOF nodes and aliases   Simon Horman
• [PATCH 06/33] ARM: shmobile: lager dts: Add MSIOF nodes   Simon Horman
• [PATCH 07/33] ARM: shmobile: koelsch dts: Add MSIOF nodes   Simon Horman
• [PATCH 08/33] ARM: shmobile: r8a7778 dtsi: Improve and correct HSPI nodes   Simon Horman
• [PATCH 09/33] ARM: shmobile: r8a7779 dtsi: Improve and correct HSPI nodes   Simon Horman
• [PATCH 10/33] ARM: shmobile: bockw reference dts: Add SPI FLASH   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.16   Simon Horman
• [PATCH 11/33] ARM: shmobile: Add DTS gpio-keys support for SW2 on Lager   Simon Horman
• [PATCH 1/4] ARM: shmobile: armadillo800eva: Spelling and grammar   Simon Horman
• [PATCH 12/33] ARM: shmobile: Add DTS gpio-keys support for SW2 on Koelsch   Simon Horman
• [PATCH 2/4] ARM: shmobile: r8a7740: Remove unused r8a7740_add_early_devices_dt()   Simon Horman
• [PATCH 13/33] ARM: shmobile: lager: Set ethernet PHY LED mode   Simon Horman
• [PATCH 14/33] ARM: shmobile: koelsch: Set ethernet PHY LED mode   Simon Horman
• [PATCH 3/4] ARM: shmobile: sh7372: Call sh7372_add_early_devices() instead of open coding   Simon Horman
• [PATCH 4/4] ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init   Simon Horman
• [PATCH 15/33] ARM: shmobile: armadillo-reference dts: Use KEY_* macros for gpio-keys   Simon Horman
• [PATCH 16/33] ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys   Simon Horman
• [PATCH 17/33] ARM: shmobile: r8a7791: add IIC0/1 clock macros   Simon Horman
• [PATCH 18/33] ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi   Simon Horman
• [PATCH 19/33] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi   Simon Horman
• [PATCH 20/33] ARM: shmobile: koelsch: make i2c2-pfc node unique   Simon Horman
• [PATCH 21/33] ARM: shmobile: koelsch: activate i2c6 bus   Simon Horman
• [PATCH 22/33] ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings   Simon Horman
• [PATCH 23/33] ARM: shmobile: r8a7791: Add EHCI MSTP clock   Simon Horman
• [PATCH 24/33] ARM: shmobile: armadillo-reference dts: enable RTC   Simon Horman
• [PATCH 25/33] ARM: shmobile: lager: Correct setting of ethernet PHY LED mode   Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Updates for v3.16   Simon Horman
• [PATCH 26/33] ARM: shmobile: r8a7790: Fix the I2C clocks parents in DT   Simon Horman
• [PATCH 27/33] ARM: shmobile: r8a7791: Fix the I2C clocks parents in DT   Simon Horman
• [PATCH 28/33] ARM: shmobile: r8a7790: add IIC0-2 clock macros   Simon Horman
• [PATCH 29/33] ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi   Simon Horman
• [PATCH 30/33] ARM: shmobile: r8a7790: add IIC(B) cores to dtsi   Simon Horman
• [PATCH 31/33] ARM: shmobile: koelsch dts: Enable Quad SPI transfers for the SPI FLASH   Simon Horman
• [PATCH 32/33] ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI FLASH   Simon Horman
• [PATCH 33/33] ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii"   Simon Horman
• [PATCH 22/33] ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings   Simon Horman
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH v6 0/2] clk: shmobile: r8a7779: Add clocks support   Simon Horman
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH 1/4] ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data   Simon Horman
• [PATCH 0/2] Add R8A7791/Henninger board DT support   Simon Horman
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH] ARM: shmobile: henninger: enable SATA0   Simon Horman
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP   Simon Horman
• [PATCH 1/3] ARM: shmobile: henninger: initial device tree   Simon Horman
• [PATCH 2/3] ARM: shmobile: henninger: add Ether DT support   Simon Horman
• [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v3.16   Simon Horman
• [PATCH 3/3] ARM: shmobile: henninger: enable SATA0   Simon Horman
• [GIT PULL] Second Round of Renesas ARM Based SoC Updates for v3.16   Simon Horman
• [PATCH] ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data   Simon Horman
• [PATCH/RFC v2] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH v4 05/11] ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console   Simon Horman
• [PATCH/RFC 0/4] ARM: shmobile: marzen: Initialise SCIF devices using DT   Simon Horman
• [PATCH 1/4] ARM: shmobile: r8a7779: Add scif nodes to dtsi   Simon Horman
• [PATCH 2/4] ARM: shmobile: marzen: Remove early_printk from command line   Simon Horman
• [PATCH 3/4] ARM: shmobile: marzen: Initialise SCIF devices using DT   Simon Horman
• [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices   Simon Horman
• [PATCH v4 05/11] ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console   Simon Horman
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices   Simon Horman
• [PATCH v5 01/11] ARM: shmobile: r7s72100: document MSTP clock support   Simon Horman
• [PATCH v5 04/11] ARM: shmobile: r7s72100: add scif nodes to dtsi   Simon Horman
• [PATCH/RFC v2] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Simon Horman
• [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices   Simon Horman
• [PATCH 1/4] ARM: shmobile: r8a7779: Add scif nodes to dtsi   Simon Horman
• [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices   Simon Horman
• [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP   Simon Horman
• [PATCH 1/4] ARM: shmobile: Ignore callbacks for subsys generic_pm_domain_data   Simon Horman
• [PATCH] ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand   Johan Hovold
• [PATCH] ARM: dts: am335x-boneblack: remove use of ti, vcc-aux-disable-is-sleep   Johan Hovold
• [PATCH v2 0/2] change ARM linux memory layout to support 32 CPUs   Liu Hua
• [PATCH v2 1/2] ARM : DMA : remove useless information about DMA   Liu Hua
• [PATCH v2 2/2] ARM : change fixmap mapping region to support 32 CPUs   Liu Hua
• [PATCH v3 0/2] change ARM linux memory layout to support 32 CPUs   Liu Hua
• [PATCH v3 1/2] ARM : fixmap : remove FIX_KMAP_BEGIN and FIX_KMAP_END   Liu Hua
• [PATCH v3 2/2] ARM : change fixmap mapping region to support 32 CPUs   Liu Hua
• [PATCH] arm: ftrace: work with CONFIG_DEBUG_SET_MODULE_RONX   Mitchel Humpherys
• [PATCH v4 1/7] arm64: Use pr_* instead of printk   Mitchel Humpherys
• [PATCH] ARM: OMAP2+: Fix config name for USB3 PHY   Kishon Vijay Abraham I
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Kishon Vijay Abraham I
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH][next] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY   Kishon Vijay Abraham I
• [PATCH v2] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY   Kishon Vijay Abraham I
• [PATCH v3 10/21] mtd: support BB SRAM on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v4 01/21] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH v4 02/21] ARM: dts: pxa2xx fix compatible strings   Sergei Ianovich
• [PATCH v4 03/21] ARM: dts: fix pxa27x-gpio interrupts   Sergei Ianovich
• [PATCH v4 04/21] ARM: dts: pxa3xx: move declaration to header   Sergei Ianovich
• [PATCH v4 05/21] ARM: dts: pxa27x: irq init using device tree   Sergei Ianovich
• [PATCH v4 06/21] ARM: dts: provide DMA config to pxamci on PXA27x   Sergei Ianovich
• [PATCH v4 07/21] ARM: dts: parse DMA config in pxamci   Sergei Ianovich
• [PATCH v4 08/21] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v4 09/21] rtc: support DS1302 RTC on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v4 10/21] mtd: support BB SRAM on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v4 11/21] ARM: pxa: support ICP DAS LP-8x4x FPGA irq   Sergei Ianovich
• [PATCH v4 12/21] serial: support for 16550A serial ports on LP-8x4x   Sergei Ianovich
• [PATCH v4 13/21] misc: support for LP-8x4x custom parallel bus   Sergei Ianovich
• [PATCH v4 14/21] misc: support for LP-8x4x rotary switch   Sergei Ianovich
• [PATCH v4 15/21] misc: support for LP-8x4x DIP switch   Sergei Ianovich
• [PATCH v4 16/21] misc: support for writing to LP-8x4x EEPROM   Sergei Ianovich
• [PATCH v4 17/21] misc: support for serial slots in LP-8x4x   Sergei Ianovich
• [PATCH v4 18/21] misc: support for parallel slots in LP-8x4x   Sergei Ianovich
• [PATCH v4 19/21] misc: support for I-8041 in LP-8x4x   Sergei Ianovich
• [PATCH v4 20/21] misc: support for I-8042 in LP-8x4x   Sergei Ianovich
• [PATCH v4 21/21] misc: support for I-8024 in LP-8x4x   Sergei Ianovich
• [PATCH v4 12/21] serial: support for 16550A serial ports on LP-8x4x   Sergei Ianovich
• [PATCH v4 21/21] misc: support for I-8024 in LP-8x4x   Sergei Ianovich
• [PATCH v4 13/21] misc: support for LP-8x4x custom parallel bus   Sergei Ianovich
• [PATCH v4 21/21] misc: support for I-8024 in LP-8x4x   Sergei Ianovich
• [PATCH v4 12/21] serial: support for 16550A serial ports on LP-8x4x   Sergei Ianovich
• [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Grazvydas Ignotas
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Grazvydas Ignotas
• [PATCH] hwrng: remove unbuildable picoxcell TRNG   Jamie Iles
• [PATCH v7 0/3] Add support for PCI in AArch64   Tanmay Inamdar
• [PATCH v2] clk: qcom: Add support for IPQ8064's global clock controller (GCC)   Ivan T. Ivanov
• [PATCH v2] clk: qcom: Add support for IPQ8064's global clock controller (GCC)   Ivan T. Ivanov
• [PATCH 4/4] pinctrl: msm: Add definitions for the APQ8064 platform   Ivan T. Ivanov
• [PATCH] ARM: debug: qcom: make UART address selection configuration option   Ivan T. Ivanov
• Device tree support for Atmel AC97 controller on AT91SAM9263   Takashi Iwai
• Device tree support for Atmel AC97 controller on AT91SAM9263   Takashi Iwai
• [PATCH v8] mmc: moxart: Add MOXA ART SD/MMC driver   Jonas Jensen
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Jonas Jensen
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Jonas Jensen
• [PATCH] ARM: moxart: add select CLKSRC_OF to ARCH_MOXART   Jonas Jensen
• [PATCH] ARM: dts: disable MDMA1 node for smdk5420 board   Seungwon Jeon
• [PATCH] ARM: dts: disable MDMA1 node for smdk5420 board   Seungwon Jeon
• [PATCH v2] ARM: dts: disable MDMA1 node for Exynos5420   Seungwon Jeon
• [ARM ATTEND] DeviceTree status   Olof Johansson
• [GIT PULL] Fourth Round of Renesas ARM Based SoC DT Updates for v3.15   Olof Johansson
• [PATCH v1 6/8] ARM: hisi: add hip04 SoC support   Olof Johansson
• [PATCH V2 17/17] ARM: exynos: config: Enable cpuidle   Olof Johansson
• [PATCH V2 17/17] ARM: exynos: config: Enable cpuidle   Olof Johansson
• [PATCH V2 17/17] ARM: exynos: config: Enable cpuidle   Olof Johansson
• [ANNOUNCE / UPDATE]: ARM mini-summit at ELC changed to BoFs (+ hack day)   Olof Johansson
• [PATCH 1/4] clocksource: Add support for the Mediatek SoCs   Olof Johansson
• [PATCH 04/27] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Olof Johansson
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Olof Johansson
• [PATCH 03/27] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Olof Johansson
• [PATCH 12/27] ARM: dts: exynos3250: Add default interrupt-parent connected with GIC   Olof Johansson
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Olof Johansson
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Olof Johansson
• randconfig failures - MMC + trusted foundations   Olof Johansson
• [linux-sunxi] [PATCH 1/2] ARM: sunxi: Split the various SoCs support in Kconfig   Olof Johansson
• [PATCH 5/5] ARM: sunxi: Remove sun4i and sun7i machine definitions   Olof Johansson
• [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w   Lee Jones
• [PATCH v6 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Lee Jones
• [PATCH v6 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Lee Jones
• [PATCH V3 4/5] mfd: palmas: support IRQ inversion at the board level   Lee Jones
• [PATCH v4 00/16] mfd: max14577: Add support for MAX77836   Lee Jones
• [PATCH v5 0/8] mtd: spi-nor: add a new framework for SPI NOR   Lee Jones
• [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework   Lee Jones
• [PATCH v2 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Lee Jones
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Lee Jones
• [PATCH v2 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Lee Jones
• [PATCH v4 1/9] mfd: AXP20x: Add mfd driver for AXP20x PMIC   Lee Jones
• [PATCH v4 1/9] mfd: AXP20x: Add mfd driver for AXP20x PMIC   Lee Jones
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Lee Jones
• [PATCH 10/11] mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree   Lee Jones
• [PATCH v4 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Lee Jones
• [PATCH 1/3] arm: dts: add device_type="memory" for ste-ccu8540   Lee Jones
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Lee Jones
• [PATCH v4 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Lee Jones
• [PATCH v4 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Lee Jones
• [PATCH v2 0/7] Add cros_ec changes for newer boards   Lee Jones
• [GIT PULL] arm: omap: Immutable branch between MFD and ARM OMAP due for the v3.16 merge-window   Lee Jones
• [PATCH v2 0/7] Add cros_ec changes for newer boards   Lee Jones
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Lee Jones
• [RFC PATCH v2 2/3] ARM: EXYNOS: Move pmu specific header files under "linux/mfd/samsung"   Lee Jones
• [RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Lee Jones
• [PATCH 1a/4] mfd: twl4030-power: Add generic reset configuration   Lee Jones
• [PATCH 1/4] mfd: twl4030-power: Add recommended idle configuration   Lee Jones
• [PATCH 2/4] mfd: twl4030-power: Add support for board specific configuration   Lee Jones
• [PATCH 3/4] mfd: twl4030power: Add a configuration to turn off oscillator during off-idle   Lee Jones
• [PATCH v2 2/4] mfd: bcm590xx: add support for secondary I2C slave address   Lee Jones
• [RESUBMIT RFC PATCH v2 2/3] ARM: EXYNOS: Move pmu specific header files under "linux/mfd/samsung"   Lee Jones
• [RESUBMIT RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Lee Jones
• [RESUBMIT RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Lee Jones
• [PATCH 1/4] mfd: twl4030-power: Add recommended idle configuration   Lee Jones
• [PATCH 1/1] ahci: st: Provide DT bindings for ST's SATA implementation   Lee Jones
• [PATCH 0/4] phy: Introduce support for MiPHY365x   Lee Jones
• [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x   Lee Jones
• [PATCH 2/4] phy: miphy365x: Add MiPHY365x header file for DT x Driver defines   Lee Jones
• [PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x   Lee Jones
• [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY   Lee Jones
• [PATCH] mfd: pm8921: Remove pm8xxx API now that sub-devices use regmap   Lee Jones
• [PATCH v2 0/7] Add cros_ec changes for newer boards   Lee Jones
• [RESUBMIT RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Lee Jones
• [RFC 43/47] mtd: nand: stm_nand_bch: read and write functions (BCH)   Lee Jones
• [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w   Lee Jones
• [RFC 07/47] mtd: nand: stm_nand_bch: initialise the BCH Controller   Lee Jones
• [RFC 23/47] mtd: nand: stm_nand_bch: read and write page (BCH)   Lee Jones
• [RFC 07/47] mtd: nand: stm_nand_bch: initialise the BCH Controller   Lee Jones
• [RFC 13/47] mtd: nand: stm_nand_bch: provide Device Tree support   Lee Jones
• [PATCH 02/10] mfd: vexpress: Convert custom func API to regmap   Lee Jones
• [PATCH 09/10] ARM: vexpress: move HBI check to sysreg driver   Lee Jones
• [PATCH 02/10] mfd: vexpress: Convert custom func API to regmap   Lee Jones
• [PATCH v5] clk: Exynos5250: Add clocks for G3D   Arun Kumar K
• [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards   Arun Kumar K
• [PATCH v5] clk: Exynos5250: Add clocks for G3D   Arun Kumar K
• [PATCH v6] clk: Exynos5250: Add clocks for G3D   Arun Kumar K
• [PATCH] clk: exynos5420: Add clock IDs needed by GPU   Arun Kumar K
• [PATCH 3/4] ARM: dts: Add usb2phy support on exynos5420   Arun Kumar K
• OMAP baseline test results for v3.14   Balaji T K
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Greg KH
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Greg KH
• [PATCH][next] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY   Greg KH
• [PATCH][next] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY   Greg KH
• [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Greg KH
• omap-serial: use mctrl_gpio helpers   Greg KH
• [PATCH 0/5] arm: Early IRQ enabling in the Undef user handler   Arun KS
• [PATCH 5/5] arm: Enable IRQs before attempting to read user space in __und_usr   Arun KS
• [PATCH 0/5] arm: Early IRQ enabling in the Undef user handler   Arun KS
• [PATCH 5/5] arm: Enable IRQs before attempting to read user space in __und_usr   Arun KS
• [PATCH 2/2] cpufreq: Remove exynos_sort_descend_freq_table in exynos5440-cpufreq.c   Amit Kachhap
• [PATCH 01/15] ASoC: CS42L51 and WM8962 codecs depend on INPUT   Xia Kaixu
• [PATCH 03/15] ASoC: SMDK_WM8580_PCM needs REGMAP_I2C   Xia Kaixu
• [PATCH 04/15] ASoC: samsung-idma: avoid 64-bit division   Xia Kaixu
• [PATCH 05/15] ASoC: nuc900: export nuc900_ac97_data   Xia Kaixu
• [PATCH 07/15] ASoC: UDA1380 needs I2C   Xia Kaixu
• [PATCH 08/15] ASoC: TTC DKB audio needs I2C   Xia Kaixu
• [PATCH 09/15] ASoC: Migo-R sound needs I2C   Xia Kaixu
• [PATCH 10/15] ASoC: TLV320AIC23 and Simtec Hermes audio   Xia Kaixu
• [PATCH 11/15] ASoC: WM0010 needs SPI   Xia Kaixu
• [PATCH 13/15] ASoC: SND_S3C_DMA_LEGACY needs S3C24XX_DMA   Xia Kaixu
• [PATCH 15/15] ASoC: pxa: remove mach header dependency   Xia Kaixu
• [PATCH 00/75] l2c series   Punnaiah Choudary Kalluri
• [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Punnaiah Choudary Kalluri
• [RFC PATCH 1/2] usb: gadget: fsl_udc: Add support for zynq usb device controller   Punnaiah Choudary Kalluri
• [RFC PATCH 2/2] usb: ehci-fsl: Add support for zynq usb host controller   Punnaiah Choudary Kalluri
• [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Punnaiah Choudary Kalluri
• [RFC PATCH 1/2] usb: gadget: fsl_udc: Add support for zynq usb device controller   Punnaiah Choudary Kalluri
• [RFC PATCH 2/2] usb: ehci-fsl: Add support for zynq usb host controller   Punnaiah Choudary Kalluri
• [PATCH 00/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Sachin Kamat
• [PATCH v7 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Sachin Kamat
• [PATCH v7 3/3] ARM: dts: add dts files for xyref5260 board   Sachin Kamat
• [PATCH v6 2/3] ARM: dts: add dts files for exynos5260 SoC   Sachin Kamat
• [PATCH V2 16/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory   Sachin Kamat
• [PATCH V2 17/17] ARM: exynos: config: Enable cpuidle   Sachin Kamat
• [PATCH v6 2/3] ARM: dts: add dts files for exynos5260 SoC   Sachin Kamat
• [PATCH 0/6] Further cleanup and enable multiplat build   Sachin Kamat
• [PATCH 1/6] ARM: EXYNOS: Remove duplicate lines in Makefile   Sachin Kamat
• [PATCH 2/6] ARM: EXYNOS: Staticize exynos_subsys   Sachin Kamat
• [PATCH 3/6] ARM: EXYNOS: Migrate Exynos specific macros from plat to mach   Sachin Kamat
• [PATCH 4/6] ARM: EXYNOS: Remove unnecessary inclusion of cpu.h   Sachin Kamat
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Sachin Kamat
• [PATCH 6/6] ARM: multi_v7_defconfig: Enable Exynos platform   Sachin Kamat
• [PATCH 2/6] ARM: EXYNOS: Staticize exynos_subsys   Sachin Kamat
• [PATCH 2/6] ARM: EXYNOS: Staticize exynos_subsys   Sachin Kamat
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Sachin Kamat
• [PATCH 10/27] ARM: dts: exynos3250: Add new exynos3250.dtsi file   Sachin Kamat
• [PATCH 15/27] ARM: dts: exynos3250: Add uart dt node to support seiral ports   Sachin Kamat
• [PATCH 01/27] ARM: EXYNOS: Add Exynos3250 SoC ID   Sachin Kamat
• [PATCH 2/6] ARM: EXYNOS: Staticize exynos_subsys   Sachin Kamat
• [PATCH v2 0/6] Further cleanup and enable multiplat build   Sachin Kamat
• [PATCH 1/6] ARM: EXYNOS: Remove duplicate lines in Makefile   Sachin Kamat
• [PATCH 2/6] ARM: EXYNOS: Remove exynos_subsys registration   Sachin Kamat
• [PATCH 3/6] ARM: EXYNOS: Migrate Exynos specific macros from plat to mach   Sachin Kamat
• [PATCH 4/6] ARM: EXYNOS: Remove unnecessary inclusion of cpu.h   Sachin Kamat
• [PATCH 5/6] ARM: EXYNOS: Enable multi-platform build support   Sachin Kamat
• [PATCH 6/6] ARM: multi_v7_defconfig: Enable Exynos platform   Sachin Kamat
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Sachin Kamat
• [PATCH v8 0/3] exynos: arch: add support for exynos5260 SoC   Sachin Kamat
• [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Sachin Kamat
• [PATCH v8 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Sachin Kamat
• [PATCH Resend] ARM: EXYNOS: Map SYSRAM address through DT   Sachin Kamat
• [PATCH Resend 3/3] ARM: EXYNOS: Map SYSRAM address through DT   Sachin Kamat
• [PATCH 0/2] Support cpufreq driver for Exynos3250   Sachin Kamat
• [PATCH 0/2] Support cpufreq driver for Exynos3250   Sachin Kamat
• [PATCH 1/2] phy: samsung: add simple phys for exynos5250 SoC   Sachin Kamat
• [PATCH] ARM: dts: Remove vmmc-supply for mmc at 12220000 on arndale-octa board   Sachin Kamat
• [PATCH 5/5] devfreq: exynos5: Use devm_devfreq_* function using device resource management   Sachin Kamat
• [PATCH Resend] ARM: EXYNOS: Map SYSRAM address through DT   Sachin Kamat
• [PATCH v3 01/12] ARM: EXYNOS: Make exynos machine_ops as static   Sachin Kamat
• [PATCH v3 05/12] ARM: EXYNOS: Remove file path from comment section   Sachin Kamat
• [PATCH v3 12/16] clk: exynos5420: fix register offset for sclk_bpll   Sachin Kamat
• [PATCH v3 08/16] clk: exynos5420: update clocks for PERIS and GEN blocks   Sachin Kamat
• [PATCH 2/4] ARM: dts: Add usb2phy to Exynos 5250   Sachin Kamat
• [PATCH 4/4] ARM: dts: Add usb 2.0 support on exynos5420   Sachin Kamat
• [LTP] How to get the Linux kernel coverage data on ARM arch when I run LTP test?   Naresh Kamboju
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [PATCH] systemtap: need to use kallsyms_lookup_funcptr with arm thumb2 kernel   Victor Kamensky
• [PATCH] systemtap: need to use kallsyms_lookup_funcptr with arm thumb2 kernel   Victor Kamensky
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Victor Kamensky
• Big endian working?   Victor Kamensky
• [PATCH v2] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [PATCH v2] ARM: uprobes need icache flush after xol write   Victor Kamensky
• Big endian working?   Victor Kamensky
• [PATCH v2] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Victor Kamensky
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Victor Kamensky
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Victor Kamensky
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Victor Kamensky
• [PATCH] ARM: fix big endian __pv_phys_pfn_offset size related issue   Victor Kamensky
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Victor Kamensky
• [PATCH] ARM64: disable DCACHE_WORD_ACCESS in big endian case   Victor Kamensky
• [PATCH] ARM64: disable DCACHE_WORD_ACCESS in big endian case   Victor Kamensky
• [PATCH] ARM64: disable DCACHE_WORD_ACCESS in big endian case   Victor Kamensky
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [PATCH v5] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [PATCH v5] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [PATCH v5] ARM: uprobes need icache flush after xol write   Victor Kamensky
• [PATCH 1/1] arm64:dts: Add I2C DTS node entry for APM SoC X-Gene platform   Feng Kan
• [PATCH 68/97] ARM: l2c: sti: remove cache size override   Srinivas Kandagatla
• [PATCH] PM / devfreq: Use freq_table for available_frequencies   Saravana Kannan
• [PATCH] PM / devfreq: Use freq_table for available_frequencies   Saravana Kannan
• [PATCH] PM / devfreq: Use freq_table for available_frequencies   Saravana Kannan
• [PATCH] PM / devfreq: Use freq_table for available_frequencies   Saravana Kannan
• [PATCH v2] PM / devfreq: Use freq_table for available_frequencies   Saravana Kannan
• [PATCH] PM / devfreq: Use freq_table for available_frequencies   Saravana Kannan
• [PATCH v2] PM / devfreq: Use freq_table for available_frequencies   Saravana Kannan
• [PATCH 07/20] cpufreq: exynos: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH 08/20] cpufreq: exynos5440: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH 15/20] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH 17/20] davinci: da850: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH 08/20] cpufreq: exynos5440: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v2 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
• [PATCH v2 3/8] davinci: da850: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v2 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v3 3/8] ARM: davinci: da850: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v4 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
• [PATCH v4 3/8] ARM: davinci: da850: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v4 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v4 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
• [PATCH v5 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
• [PATCH v5 3/8] ARM: davinci: da850: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v5 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Stratos Karafotis
• [PATCH v5 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Stratos Karafotis
• [RESEND: RFC PATCH 3/3] pcie: keystone: add pcie driver based on designware core driver   Murali Karicheri
• [RESEND: RFC PATCH 3/3] pcie: keystone: add pcie driver based on designware core driver   Murali Karicheri
• [RESEND: RFC PATCH 3/3] pcie: keystone: add pcie driver based on designware core driver   Murali Karicheri
• [RESEND: RFC PATCH 3/3] pcie: keystone: add pcie driver based on designware core driver   Murali Karicheri
• [PATCH] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH 2/4] ARM: EXYNOS: Fix core ID used by platsmp and hotplug code   Chander Kashyap
• [PATCH v4] arm: exynos: generalize power register address calculation   Chander Kashyap
• [PATCH 0/4] add cpuidle support for Exynos5420   Chander Kashyap
• [PATCH 1/4] cpuidle: config: Add SOC_EXYNOS5420 entry to select cpuidle-big-little driver   Chander Kashyap
• [PATCH 2/4] driver: cpuidle: cpuidle-big-little: init driver for Exynos5420   Chander Kashyap
• [PATCH 3/4] exynos: cpuidle: do not allow cpuidle registration for Exynos5420   Chander Kashyap
• [PATCH 4/4] mcpm: exynos: populate suspend and powered_up callbacks   Chander Kashyap
• [PATCH 1/4] cpuidle: config: Add SOC_EXYNOS5420 entry to select cpuidle-big-little driver   Chander Kashyap
• [PATCH 4/4] mcpm: exynos: populate suspend and powered_up callbacks   Chander Kashyap
• [Patch v2 0/4] add cpuidle support for Exynos5420   Chander Kashyap
• [Patch v2 1/4] cpuidle: config: Add SOC_EXYNOS5420 entry to select cpuidle-big-little driver   Chander Kashyap
• [Patch v2 2/4] driver: cpuidle: cpuidle-big-little: init driver for Exynos5420   Chander Kashyap
• [Patch v2 3/4] exynos: cpuidle: do not allow cpuidle registration for Exynos5420   Chander Kashyap
• [Patch v2 4/4] mcpm: exynos: populate suspend and powered_up callbacks   Chander Kashyap
• [Patch v2 4/4] mcpm: exynos: populate suspend and powered_up callbacks   Chander Kashyap
• [Patch v2 2/4] driver: cpuidle: cpuidle-big-little: init driver for Exynos5420   Chander Kashyap
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Charles Keepax
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Charles Keepax
• [PATCH 0/5] MCPM backend for Exynos5420   Abhilash Kesavan
• [PATCH 1/5] ARM: bL_switcher: Don't enable bL switcher on systems without CCI   Abhilash Kesavan
• [PATCH 2/5] drivers/bus: arm-cci: Add common control interface for ACE ports   Abhilash Kesavan
• [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM   Abhilash Kesavan
• [PATCH 4/5] ARM: dts: exynos5420: add CCI node   Abhilash Kesavan
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH 2/5] drivers/bus: arm-cci: Add common control interface for ACE ports   Abhilash Kesavan
• [PATCH 1/5] ARM: bL_switcher: Don't enable bL switcher on systems without CCI   Abhilash Kesavan
• [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM   Abhilash Kesavan
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH 1/5] ARM: bL_switcher: Don't enable bL switcher on systems without CCI   Abhilash Kesavan
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH v2 0/3] MCPM backend for Exynos5420   Abhilash Kesavan
• [PATCH v2 1/3] ARM: dts: exynos5420: add CCI node   Abhilash Kesavan
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH v2 3/3] arm: exynos: Add /dev/bL_status user interface on Exynos5420   Abhilash Kesavan
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH v3 0/6] MCPM backend for Exynos5420   Abhilash Kesavan
• [PATCH v3 1/6] ARM: EXYNOS: Add generic cpu power control functions for all exynos based SoCs   Abhilash Kesavan
• [PATCH v3 2/6] ARM: EXYNOS: use generic exynos cpu power control functions   Abhilash Kesavan
• [PATCH v3 3/6] arm: exynos: Add generic cluster power control functions   Abhilash Kesavan
• [PATCH v3 4/6] ARM: dts: exynos5420: add CCI node   Abhilash Kesavan
• [PATCH v3 5/6] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH v3 6/6] arm: exynos: Add /dev/bL_status user interface on Exynos5420   Abhilash Kesavan
• [PATCH 0/2] Add generic cpu power control functions for exynos   Abhilash Kesavan
• [PATCH RFC 0/8] Devfreq support for Exynos5250/5420   Abhilash Kesavan
• [PATCH RFC 1/8] clk: exynos5250: add aliases for clocks used by devfreq   Abhilash Kesavan
• [PATCH RFC 2/8] clk: exynos5420: Add aliases for clocks used by devfreq   Abhilash Kesavan
• [PATCH RFC 3/8] ARM: dts: Add PPMU device tree support for Exynos5250   Abhilash Kesavan
• [PATCH RFC 4/8] ARM: dts: Add PPMU device tree support for Exynos5420   Abhilash Kesavan
• [PATCH RFC 5/8] PM / devfreq: exynos5250: migrate to common-clock   Abhilash Kesavan
• [PATCH RFC 6/8] PM / devfreq: exynos: Fix typo in macro   Abhilash Kesavan
• [PATCH RFC 7/8] PM / devfreq: Rename the exynos5250 devfreq driver   Abhilash Kesavan
• [PATCH RFC 8/8] PM / devfreq: Add devfreq driver for Exynos5420   Abhilash Kesavan
• [PATCH RFC 0/8] Devfreq support for Exynos5250/5420   Abhilash Kesavan
• [PATCH v3 6/6] arm: exynos: Add /dev/bL_status user interface on Exynos5420   Abhilash Kesavan
• [PATCH v3 5/6] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH v3 5/6] arm: exynos: Add MCPM call-back functions   Abhilash Kesavan
• [PATCH v2] mtd: davinci-nand: disable subpage write for keystone-nand   Ivan Khoronzhuk
• [PATCH v2 0/5] Introduce keystone reset driver   Ivan Khoronzhuk
• [PATCH v2 1/5] Power: reset: keystone-reset: introduce keystone reset driver   Ivan Khoronzhuk
• [PATCH v2 2/5] Power: reset: add bindings for keystone reset driver   Ivan Khoronzhuk
• [PATCH v2 3/5] ARM: keystone: remove redundant reset stuff   Ivan Khoronzhuk
• [PATCH v2 4/5] ARM: dts: keystone: update reset node to work with reset driver   Ivan Khoronzhuk
• [PATCH v2 5/5] ARM: keystone: enable reset driver support   Ivan Khoronzhuk
• [PATCH v2 2/5] Power: reset: add bindings for keystone reset driver   Ivan Khoronzhuk
• [PATCH v2] mtd: davinci-nand: disable subpage write for keystone-nand   Ivan Khoronzhuk
• [GIT PULL 5/6] Samsung PM updates for v3.15   Kukjin Kim
• [GIT PULL 2/2] Samsung 2nd DT updates for v3.15   Kukjin Kim
• [GIT PULL 1/2] Samsung 2nd cleanup for v3.15   Kukjin Kim
• [PATCH 02/10] ARM: EXYNOS: Correct file path in comment message   Kukjin Kim
• [GIT PULL 5/6] Samsung PM updates for v3.15   Kukjin Kim
• [GIT PULL 5/6] Samsung PM updates for v3.15   Kukjin Kim
• [PATCH Resend] ARM: EXYNOS: Map SYSRAM address through DT   Kukjin Kim
• [PATCH] ARM: dts: disable MDMA1 node for smdk5420 board   Kukjin Kim
• [PATCH v8 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Kukjin Kim
• [PATCH v8 2/3] ARM: dts: add dts files for exynos5260 SoC   Kukjin Kim
• [PATCH v2] ARM: dts: disable MDMA1 node for Exynos5420   Kukjin Kim
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Kukjin Kim
• [PATCH] i2c: s3c2410: resume race fix   Kukjin Kim
• [Patch v2 0/4] add cpuidle support for Exynos5420   Kukjin Kim
• [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC   Kukjin Kim
• [PATCHv4 2/7] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Kukjin Kim
• [PATCH v8 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Kukjin Kim
• [PATCH V5 00/20] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Kukjin Kim
• [PATCH] ARM: dts: Remove vmmc-supply for mmc at 12220000 on arndale-octa board   Kukjin Kim
• [PATCH 04/27] ARM: EXYNOS: Support secondary CPU boot of Exynos4212   Sangbeom Kim
• [PATCH] ARM: Better virt_to_page() handling   Russell King
• [PATCH] ARM: add missing system_misc.h include to process.c   Russell King
• [PATCH] ARM: dt: microsom: don't set bit 7 for ethernet mux settings   Russell King
• [PATCH 1/8] imx-drm: Move IPU_PIX_FMT_GBR24 definition into imx-ipu-v3.h   Russell King
• [PATCH 2/8] imx-drm: ipu-dc: Use usleep_range instead of msleep   Russell King
• [PATCH 3/8] imx-drm: ipu-dmfc: Remove unneeded 'dmfc' check   Russell King
• [PATCH 4/8] imx-drm: imx-ldb: Use snprintf()   Russell King
• [PATCH 5/8] imx-drm: imx-ldb: Add drm_panel support   Russell King
• [PATCH 6/8] imx-drm: Match ipu_di_signal_cfg's clk_pol with its description.   Russell King
• [PATCH 7/8] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.   Russell King
• [PATCH 8/8] imx-drm: Add RGB666 support for parallel display.   Russell King
• [PATCH] ARM: imx: propagate DI clock changes up the clock tree to PLL5   Russell King
• [PATCH RFC 1/5] ata: ahci_imx: warn when disabling ahci link   Russell King
• [PATCH RFC 2/5] ata: ahci_imx: avoid reprobing ahci_imx driver when using DT   Russell King
• [PATCH RFC 3/5] ata: ahci_imx: allow hardware parameters to be specified in DT   Russell King
• [PATCH RFC 4/5] ARM: cubox-i: add eSATA DT configuration   Russell King
• [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum   Russell King
• [PATCH] imx-drm: fix hdmi hotplug detection initial state   Russell King
• [PATCH] ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i   Russell King
• [PATCH 01/38] mmc: sdio_irq: rework sdio irq handling   Russell King
• [PATCH 02/38] mmc: sdhci: clean up interrupt handling   Russell King
• [PATCH 03/38] mmc: sdhci: clean up sdio interrupt enable handling   Russell King
• [PATCH 04/38] mmc: sdhci: convert to new SDIO IRQ handling   Russell King
• [PATCH 05/38] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King
• [PATCH 06/38] mmc: sdhci: allow sdio interrupts while sdhci runtime suspended   Russell King
• [PATCH 07/38] mmc: sdhci: more efficient interrupt enable register handling   Russell King
• [PATCH 08/38] mmc: sdhci: plug hole in disabling card detection interrupts   Russell King
• [PATCH 09/38] mmc: sdhci: convert generic bus width setup to library function   Russell King
• [PATCH 10/38] mmc: sdhci: convert reset into a library function   Russell King
• [PATCH 11/38] mmc: sdhci: move FSL ESDHC reset handling quirk into esdhc code   Russell King
• [PATCH 12/38] mmc: sdhci: avoid sync'ing the SG if there's no misalignment   Russell King
• [PATCH 13/38] mmc: sdhci: convert ADMA descriptors to a coherent allocation   Russell King
• [PATCH 14/38] mmc: sdhci: clean up sdhci_update_clock()/sdhci_set_clock()   Russell King
• [PATCH 15/38] mmc: sdhci: move setting host->clock into sdhci_do_set_ios()   Russell King
• [PATCH 16/38] mmc: sdhci: move setting mmc->actual_clock into set_clock handlers   Russell King
• [PATCH 17/38] mmc: sdhci: convert sdhci_set_clock() into a library function   Russell King
• [PATCH 18/38] mmc: sdhci-esdhc-imx: avoid DMA to kernel stack   Russell King
• [PATCH 19/38] mmc: sdhci-esdhc-imx: comment runtime_pm_get_sync() in esdhc_prepare_tuning()   Russell King
• [PATCH 20/38] mmc: sdhci-esdhc-imx: fix lockdep splat upon tuning   Russell King
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King
• [PATCH 22/38] mmc: sdhci: set_uhs_signaling() need not return a value   Russell King
• [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function   Russell King
• [PATCH 24/38] mmc: sdhci: cache timing information locally   Russell King
• [PATCH 25/38] mmc: sdhci: clean up sdhci_execute_tuning() decision   Russell King
• [PATCH 26/38] mmc: sdhci-esdhc-imx: remove emulation of uhs_mode   Russell King
• [PATCH 27/38] mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks   Russell King
• [PATCH 28/38] mmc: sdhci: remove platform_suspend/platform_resume callbacks   Russell King
• [PATCH 29/38] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling   Russell King
• [PATCH 30/38] mmc: sdhci: move regulator handling into sdhci_set_power()   Russell King
• [PATCH 31/38] mmc: sdhci: move remaining power handling into sdhci_set_power()   Russell King
• [PATCH 32/38] mmc: sdhci: track whether preset mode is currently enabled in hardware   Russell King
• [PATCH 33/38] mmc: sdhci: fix SDHCI dependencies   Russell King
• [PATCH 34/38] mmc: add support for power-on sequencing through DT   Russell King
• [PATCH 35/38] mmc: dw_mmc: call mmc_of_parse to fill in common options   Russell King
• [PATCH 36/38] mmc: fix power-on sequencing for esdhc-imx driver   Russell King
• [PATCH 37/38] ARM: cubox-i: add support for SD UHS-1 cards   Russell King
• [PATCH 38/38] ARM: cubox-i: add support for Wifi/BT   Russell King
• [PATCH 001/222] ARM: l2c: remove outer_inv_all() method   Russell King
• [PATCH 002/222] ARM: l2c: remove unnecessary call to outer_flush_all()   Russell King
• [PATCH 003/222] ARM: l2c: avoid calling outer_flush_all() unnecessarily (Spear)   Russell King
• [PATCH 004/222] ARM: l2c: omap2: remove ES1.0 support   Russell King
• [PATCH 005/222] ARM: l2c: remove unnecessary UL-suffix to mask values   Russell King
• [PATCH 006/222] ARM: outer cache: add documentation of outer cache functions   Russell King
• [PATCH 007/222] ARM: outer cache: add WARN_ON() to outer_disable()   Russell King
• [PATCH 008/222] ARM: l2c: add helper for L2 cache controller DT IDs   Russell King
• [PATCH 009/222] ARM: l2c: tidy up l2x0_of_data declarations   Russell King
• [PATCH 010/222] ARM: l2c: rename OF specific things, making l2x0_of_data available to all   Russell King
• [PATCH 011/222] ARM: l2c: provide generic function for calling set_debug method   Russell King
• [PATCH 012/222] ARM: l2c: split out cache unlock code   Russell King
• [PATCH 013/222] ARM: l2c: provide generic helper for way-based operations   Russell King
• [PATCH 014/222] ARM: l2c: rename cache_wait_way()   Russell King
• [PATCH 015/222] ARM: l2c: add and use L2C revision constants   Russell King
• [PATCH 016/222] ARM: l2c: clean up OF initialisation a bit   Russell King
• [PATCH 017/222] ARM: l2c: pass iomem address into data->save function   Russell King
• [PATCH 018/222] ARM: l2c: move l2c save function to __l2c_init()   Russell King
• [PATCH 019/222] ARM: l2c: group implementation specific code together   Russell King
• [PATCH 020/222] ARM: l2c: provide enable method   Russell King
• [PATCH 021/222] ARM: l2c: write auxctrl register before unlocking   Russell King
• [PATCH 022/222] ARM: l2c: only write the auxiliary control register if required   Russell King
• [PATCH 023/222] ARM: l2c: move aurora broadcast setup to enable function   Russell King
• [PATCH 024/222] ARM: l2c: implement fixups for L2 cache controller quirks/errata   Russell King
• [PATCH 025/222] ARM: l2c: clean up L2 cache initialisation messages   Russell King
• [PATCH 026/222] ARM: l2c: move and add ARM L2C-2x0/L2C-310 save/resume code to non-OF   Russell King
• [PATCH 027/222] ARM: l2c: clean up save/resume functions   Russell King
• [PATCH 028/222] ARM: l2c: simplify l2x0 unlocking code   Russell King
• [PATCH 029/222] ARM: l2c: move pl310_set_debug() into l2c-310 code   Russell King
• [PATCH 030/222] ARM: l2c: add L2C-210 specific handlers   Russell King
• [PATCH 031/222] ARM: l2c: implement L2C-310 erratum 727915 as a method override   Russell King
• [PATCH 032/222] ARM: l2c: implement L2C-310 erratum 588369 as a method override   Russell King
• [PATCH 033/222] ARM: l2c: use L2C-210 handlers for L2C-310 errata-less implementations   Russell King
• [PATCH 034/222] ARM: l2c: add L2C-220 specific handlers   Russell King
• [PATCH 035/222] ARM: l2c: convert Broadcom L2C-310 to new code   Russell King
• [PATCH 036/222] ARM: l2c: remove obsolete l2x0 ops for non-OF init   Russell King
• [PATCH 037/222] ARM: l2c: move type string into l2c_init_data structure   Russell King
• [PATCH 038/222] ARM: l2c: add decode for L2C-220 cache ways   Russell King
• [PATCH 039/222] ARM: l2c: move way size calculation data into l2c_init_data   Russell King
• [PATCH 040/222] ARM: l2c: move errata configuration options to arch/arm/mm/Kconfig   Russell King
• [PATCH 041/222] ARM: l2c: provide generic hook to intercept writes to secure registers   Russell King
• [PATCH 042/222] ARM: l2c: omap2: implement new write_sec method   Russell King
• [PATCH 043/222] ARM: l2c: omap2: remove explicit SMI calls to enable L2 cache   Russell King
• [PATCH 044/222] ARM: l2c: highbank: implement new write_sec method   Russell King
• [PATCH 045/222] ARM: l2c: highbank: remove explicit SMI call in L2 cache initialisation   Russell King
• [PATCH 046/222] ARM: l2c: ux500: implement dummy write_sec method   Russell King
• [PATCH 047/222] ARM: l2c: remove old .set_debug method   Russell King
• [PATCH 048/222] ARM: l2c: implement L2C-310 erratum 752271 in core L2C code   Russell King
• [PATCH 049/222] ARM: l2c: fix register naming   Russell King
• [PATCH 050/222] ARM: l2c: add automatic enable of early BRESP   Russell King
• [PATCH 051/222] ARM: l2c: remove platforms/SoCs setting early BRESP   Russell King
• [PATCH 052/222] ARM: l2c: tegra: remove associativity and way size from aux_ctrl   Russell King
• [PATCH 053/222] ARM: l2c: ux500: remove associativity and way size from aux_ctrl   Russell King
• [PATCH 054/222] ARM: l2c: ux500: don't try to change the L2 cache auxiliary control register   Russell King
• [PATCH 055/222] ARM: l2c: cns3xxx: remove cache size override   Russell King
• [PATCH 056/222] ARM: l2c: exynos: remove cache size override   Russell King
• [PATCH 057/222] ARM: l2c: nomadik: remove cache size override   Russell King
• [PATCH 058/222] ARM: l2c: omap2: remove cache size override   Russell King
• [PATCH 059/222] ARM: l2c: prima2: remove cache size override   Russell King
• [PATCH 060/222] ARM: l2c: shmobile: remove cache size override   Russell King
• [PATCH 061/222] ARM: l2c: spear13xx: remove cache size override   Russell King
• [PATCH 062/222] ARM: l2c: sti: remove cache size override   Russell King
• [PATCH 063/222] ARM: l2c: zynq: remove cache size override   Russell King
• [PATCH 064/222] ARM: l2c: realview: improve commentry about the L2 cache requirements   Russell King
• [PATCH 065/222] ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this   Russell King
• [PATCH 066/222] ARM: l2c: print a warning with L2C-310 caches if the cache size is modified   Russell King
• [PATCH 067/222] ARM: l2c: vexpress ca9x4: move L2 cache initialisation earlier   Russell King
• [PATCH 068/222] ARM: l2c: add L2C-310 power control DT properties   Russell King
• [PATCH 069/222] ARM: l2c: check that DT files specify the required "cache-unified" property   Russell King
• [PATCH 070/222] ARM: l2c: add warnings for stuff modifying aux_ctrl register values   Russell King
• [PATCH 071/222] net:fec: remove unnecessary ip stack includes   Russell King
• [PATCH 072/222] net:fec: reorder ethtool ops to match order in struct declaration   Russell King
• [PATCH 073/222] net:fec: remove checking for NULL phy_dev in fec_enet_close()   Russell King
• [PATCH 074/222] net:fec: ensure that a disconnected phy isn't configured   Russell King
• [PATCH 075/222] net:fec: add support for dumping transmit ring on timeout   Russell King
• [PATCH 076/222] net:fec: use netif_tx_disable() rather than netif_stop_queue()   Russell King
• [PATCH 077/222] net:fec: iMX6 FEC does not support half-duplex gigabit   Russell King
• [PATCH 078/222] net:fec: clean up transmit descriptor setup   Russell King
• [PATCH 079/222] net:fec: make rx skb allocation/map more robust   Russell King
• [PATCH 080/222] net:fec: ensure fec_enet_free_buffers() properly cleans the rings   Russell King
• [PATCH 081/222] net:fec: fix missing kmalloc() failure check in fec_enet_alloc_buffers()   Russell King
• [PATCH 082/222] net:fec: ensure that we dma unmap the transmit descriptors   Russell King
• [PATCH 083/222] net:fec: remove useless fep->opened   Russell King
• [PATCH 084/222] net:fec: stop the phy before shutting down the MAC   Russell King
• [PATCH 085/222] net:fec: improve safety of suspend/resume/transmit timeout paths   Russell King
• [PATCH 086/222] net:fec: ensure fec_enet_close() copes with resume failure   Russell King
• [PATCH 087/222] net:fec: only run a restart or stop if the device is present and running   Russell King
• [PATCH 088/222] net:fec: move calls to quiesce/resume packet processing out of fec_restart()   Russell King
• [PATCH 089/222] net:fec: remove inappropriate calls around fec_restart()   Russell King
• [PATCH 090/222] net:fec: quiesce packet processing before stopping device in fec_suspend()   Russell King
• [PATCH 091/222] net:fec: quiesce packet processing before stopping device in fec_set_features()   Russell King
• [PATCH 092/222] net:fec: quiesce packet processing before changing features   Russell King
• [PATCH 093/222] net:fec: quiesce packet processing when taking link down in fec_enet_adjust_link()   Russell King
• [PATCH 094/222] net:fec: fix ethtool set_pauseparam duplex bug   Russell King
• [PATCH 095/222] net:fec: clean up duplex mode handling   Russell King
• [PATCH 096/222] net:fec: add barrier to transmit path to ensure proper ordering   Russell King
• [PATCH 097/222] net:fec: add barrier to receive path to ensure proper ordering   Russell King
• [PATCH 098/222] net:fec: better implementation of iMX6 ERR006358 quirk   Russell King
• [PATCH 099/222] net:fec: avoid hitting transmitter if it is still running   Russell King
• [PATCH 100/222] net:fec: remove delayed work   Russell King
• [PATCH 101/222] net:fec: fix interrupt handling races   Russell King
• [PATCH 102/222] net:fec: clear receive interrupts before processing a packet   Russell King
• [PATCH 103/222] net:fec: remove useless status check in tx reap path   Russell King
• [PATCH 104/222] net:fec: use a union for the buffer descriptors   Russell King
• [PATCH 105/222] net:fec: consolidate hwtstamp implementation   Russell King
• [PATCH 106/222] net:fec: better indexing for transmit descriptor ring   Russell King
• [PATCH 107/222] net:fec: better indexing for receive descriptor ring   Russell King
• [PATCH 108/222] net:fec: calculate ring space rather than relying on comparing indices   Russell King
• [PATCH 109/222] net:fec: increase transmit ring size   Russell King
• [PATCH 110/222] net:fec: increase receive ring size   Russell King
• [PATCH 111/222] net:fec: add scatter-gather support   Russell King
• [PATCH 112/222] net:fec: add byte queue limits support   Russell King
• [PATCH 113/222] net:fec: add better flow control support   Russell King
• [PATCH 114/222] net:fec: move transmit dma ring address calculation to fec_enet_init()   Russell King
• [PATCH 115/222] net:fec: allocate descriptor rings at device open, and free on device close   Russell King
• [PATCH 116/222] net:fec: remove unnecessary code   Russell King
• [PATCH 117/222] net:fec: consolidate common parts of mdio read/write   Russell King
• [PATCH 118/222] net:fec: add locking for MDIO bus access   Russell King
• [PATCH 119/222] net:fec: move bufdesc_ex flag into flags   Russell King
• [PATCH 120/222] net:fec: move receive checksum flags into new flags member   Russell King
• [PATCH 121/222] net:fec: only enable CTAG_RX and IP checksumming if we have enhanced buffer descriptors   Russell King
• [PATCH 122/222] net:fec: avoid checking more flags than necessary in rx path   Russell King
• [PATCH 123/222] net:fec: move vlan receive flag into our private flags   Russell King
• [PATCH 124/222] net:fec: add ethtool support for tx/rx ring sizes   Russell King
• [PATCH 125/222] net:fec: even larger rings   Russell King
• [PATCH 126/222] net:fec: unsorted hacks   Russell King
• [PATCH 127/222] leds: leds-pwm: provide a common function to setup a single led-pwm device   Russell King
• [PATCH 128/222] leds: leds-pwm: convert OF parsing code to use led_pwm_add()   Russell King
• [PATCH 129/222] leds: leds-pwm: implement PWM inversion   Russell King
• [PATCH 130/222] leds: leds-pwm: add DT support for LEDs wired to supply   Russell King
• [PATCH 131/222] ARM: add support for Cubox-i PWM-driven front panel LED   Russell King
• [PATCH 132/222] ASoC: work around block transfer issues with imx-pcm-dma   Russell King
• [PATCH 133/222] ata: ahci_imx: warn when disabling ahci link   Russell King
• [PATCH 134/222] ARM: imx: keep PLLs in bypass while they're locking   Russell King
• [PATCH 135/222] ARM: imx: set IPU to be derived from the 540MHz PLL3 PFD1 clock   Russell King
• [PATCH 136/222] regulator: allow GPIO 0 to be used for an enable signal   Russell King
• [PATCH 137/222] ARM: dt: microsom: don't set bit 7 for ethernet mux settings   Russell King
• [PATCH 138/222] ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel   Russell King
• [PATCH 139/222] ARM: i.MX6: ipu_di_sel clocks can set parent rates   Russell King
• [PATCH 140/222] ata: ahci_imx: allow hardware parameters to be specified in DT   Russell King
• [PATCH 141/222] ARM: cubox-i: add eSATA DT configuration   Russell King
• [PATCH 142/222] ahci_imx: add disable for spread-spectrum   Russell King
• [PATCH 143/222] imx-drm: imx-drm-core: fix imx_drm_encoder_get_mux_id   Russell King
• [PATCH 144/222] imx-drm: imx-drm-core: skip components whose parent device is disabled   Russell King
• [PATCH 145/222] imx-drm: imx-ldb: add drm_panel support   Russell King
• [PATCH 146/222] imx-drm: match ipu_di_signal_cfg's clk_pol with its description.   Russell King
• [PATCH 147/222] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.   Russell King
• [PATCH 148/222] imx-drm: add RGB666 support for parallel display.   Russell King
• [PATCH 149/222] imx-drm: ipu-common: add ipu_map_irq to request non-IDMAC interrupts   Russell King
• [PATCH 150/222] imx-drm: ipu-common: add helpers to check for a busy IDMAC channel and to busywait for an interrupt   Russell King
• [PATCH 151/222] imx-drm: ipu-dmfc: wait for FIFOs to run empty before disabling   Russell King
• [PATCH 152/222] imx-drm: ipu-dc: wait for DC_FC_1 / DP_SF_END interrupt   Russell King
• [PATCH 153/222] imx-drm: ipu-dp: split disabling the DP foreground channel from disabling the DP module   Russell King
• [PATCH 154/222] imx-drm: imx-dp: when disabling the DP foreground channel, wait until the DP background channel is finished before disabling the IDMAC channel   Russell King
• [PATCH 155/222] imx-drm: ipuv3-crtc: change display enable/disable order   Russell King
• [PATCH 156/222] imx-drm: ipu-dc: disable DC module when not in use   Russell King
• [PATCH 157/222] imx-drm: imx-hdmi: fix hdmi hotplug detection initial state   Russell King
• [PATCH 158/222] dw-hdmi-audio: add audio driver   Russell King
• [PATCH 159/222] dw-hdmi-audio: better hardware position tracking   Russell King
• [PATCH 160/222] dw-hdmi-audio: parse ELD from HDMI driver   Russell King
• [PATCH 161/222] dw-hdmi-audio: try to fix burbling audio   Russell King
• [PATCH 162/222] dw-hdmi-audio: try implementing ERR005174 to fix burbling audio   Russell King
• [PATCH 163/222] dw-hdmi-audio: another attempt at fixing burbling   Russell King
• [PATCH 164/222] dw-hdmi-audio: basic suspend/resume support   Russell King
• [PATCH 165/222] cec: add generic HDMI CEC driver   Russell King
• [PATCH 166/222] imx-drm: dw-hdmi-cec: add HDMI CEC driver   Russell King
• [PATCH 167/222] ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i   Russell King
• [PATCH 168/222] ARM: imx: enable HDMI DRM support for imx_v6_v7_defconfig   Russell King
• [PATCH 169/222] drm/i915: don't disable disconnected outputs   Russell King
• [PATCH 170/222] drm: add generic ddc connector   Russell King
• [PATCH 171/222] ARM: l2c: trial at enabling some Cortex-A9 optimisations   Russell King
• [PATCH 172/222] ARM: l2c: move L2 cache register saving to a more sensible location   Russell King
• [PATCH 173/222] ARM: l2c: always enable low power modes   Russell King
• [PATCH 174/222] ARM: l2c: imx: remove direct write to power control register   Russell King
• [PATCH 175/222] ARM: l2c: omap2: avoid reading directly from the L2 registers in platform code   Russell King
• [PATCH 176/222] ARM: l2c: provide common PL310 early resume code   Russell King
• [PATCH 177/222] ARM: l2c: exynos: convert to common l2c310 early resume functionality   Russell King
• [PATCH 178/222] ARM: l2c: tegra: convert to common l2c310 early resume functionality   Russell King
• [PATCH 179/222] ARM: l2c: imx: convert to common l2c310 early resume functionality   Russell King
• [PATCH 180/222] ARM: l2c: always enable non-secure access to lockdown registers   Russell King
• [PATCH 181/222] ARM: l2c: omap2+: get rid of redundant cache replacement policy setting   Russell King
• [PATCH 182/222] ARM: l2c: omap2+: get rid of init call   Russell King
• [PATCH 183/222] ARM: l2c: AM43x: add L2 cache support   Russell King
• [PATCH 184/222] ARM: l2c: permit flush_all() on large flush_range() XXX Needs more thought XXX   Russell King
• [PATCH 185/222] mmc: sdio_irq: rework sdio irq handling   Russell King
• [PATCH 186/222] mmc: sdhci: clean up interrupt handling   Russell King
• [PATCH 187/222] mmc: sdhci: clean up sdio interrupt enable handling   Russell King
• [PATCH 188/222] mmc: sdhci: convert to new SDIO IRQ handling   Russell King
• [PATCH 189/222] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King
• [PATCH 190/222] mmc: sdhci: allow sdio interrupts while sdhci runtime suspended   Russell King
• [PATCH 191/222] mmc: sdhci: more efficient interrupt enable register handling   Russell King
• [PATCH 192/222] mmc: sdhci: plug hole in disabling card detection interrupts   Russell King
• [PATCH 193/222] mmc: sdhci: convert generic bus width setup to library function   Russell King
• [PATCH 194/222] mmc: sdhci: convert reset into a library function   Russell King
• [PATCH 195/222] mmc: sdhci: move FSL ESDHC reset handling quirk into esdhc code   Russell King
• [PATCH 196/222] mmc: sdhci: avoid sync'ing the SG if there's no misalignment   Russell King
• [PATCH 197/222] mmc: sdhci: convert ADMA descriptors to a coherent allocation   Russell King
• [PATCH 198/222] mmc: sdhci: clean up sdhci_update_clock()/sdhci_set_clock()   Russell King
• [PATCH 199/222] mmc: sdhci: move setting host->clock into sdhci_do_set_ios()   Russell King
• [PATCH 200/222] mmc: sdhci: move setting mmc->actual_clock into set_clock handlers   Russell King
• [PATCH 201/222] mmc: sdhci: convert sdhci_set_clock() into a library function   Russell King
• [PATCH 202/222] mmc: sdhci-esdhc-imx: avoid DMA to kernel stack   Russell King
• [PATCH 203/222] mmc: sdhci-esdhc-imx: comment runtime_pm_get_sync() in esdhc_prepare_tuning()   Russell King
• [PATCH 204/222] mmc: sdhci-esdhc-imx: fix lockdep splat upon tuning   Russell King
• [PATCH 205/222] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King
• [PATCH 206/222] mmc: sdhci: set_uhs_signaling() need not return a value   Russell King
• [PATCH 207/222] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function   Russell King
• [PATCH 208/222] mmc: sdhci: cache timing information locally   Russell King
• [PATCH 209/222] mmc: sdhci: clean up sdhci_execute_tuning() decision   Russell King
• [PATCH 210/222] mmc: sdhci-esdhc-imx: remove emulation of uhs_mode   Russell King
• [PATCH 211/222] mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks   Russell King
• [PATCH 212/222] mmc: sdhci: remove platform_suspend/platform_resume callbacks   Russell King
• [PATCH 213/222] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling   Russell King
• [PATCH 214/222] mmc: sdhci: move regulator handling into sdhci_set_power()   Russell King
• [PATCH 215/222] mmc: sdhci: move remaining power handling into sdhci_set_power()   Russell King
• [PATCH 216/222] mmc: sdhci: track whether preset mode is currently enabled in hardware   Russell King
• [PATCH 217/222] mmc: sdhci: fix SDHCI dependencies   Russell King
• [PATCH 218/222] mmc: add support for power-on sequencing through DT   Russell King
• [PATCH 219/222] mmc: dw_mmc: call mmc_of_parse to fill in common options   Russell King
• [PATCH 220/222] mmc: fix power-on sequencing for esdhc-imx driver   Russell King
• [PATCH 221/222] ARM: cubox-i: add support for SD UHS-1 cards   Russell King
• [PATCH 222/222] ARM: cubox-i: add support for Wifi/BT   Russell King
• [PATCH 22/32] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function   Russell King
• [PATCH] clkdev: only fall through to clk_get_sys() if DT indicates no entry   Russell King
• [PATCH RFC 1/8] component: fix missed cleanup in case of devres failure   Russell King
• [PATCH RFC 2/8] component: ignore multiple additions of the same component   Russell King
• [PATCH RFC 3/8] component: add support for component match array   Russell King
• [PATCH RFC 4/8] drm: msm: update to use component match support   Russell King
• [PATCH RFC 5/8] imx-drm: update to use component match support   Russell King
• [PATCH RFC 6/8] component: remove old add_components method   Russell King
• [PATCH RFC 7/8] component: move check for unbound master into try_to_bring_up_masters()   Russell King
• [PATCH RFC 8/8] component: track components via array rather than list   Russell King
• [PATCH RFC 1/8] component: fix missed cleanup in case of devres failure   Russell King
• [PATCH 1/5] pm: domains: quieten down generic pm domains   Russell King
• [PATCH 2/5] pm: domains: avoid potential oops in pm_genpd_remove_device()   Russell King
• [PATCH 3/5] ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets   Russell King
• [PATCH 4/5] ARM: dove: add Dove PMU DT entries to dove.dtsi   Russell King
• [PATCH 5/5] ARM: dove: add non-DT PMU support   Russell King
• [PATCH 01/16] ARM: l2c: bcm - remove UL (needs folding into earlier patch)   Russell King
• [PATCH 02/16] ARM: l2c: add platform independent core L2 cache initialisation   Russell King
• [PATCH 03/16] ARM: l2c: convert rockchip to generic l2c initialisation   Russell King
• [PATCH 04/16] ARM: l2c: convert nomadik to generic l2c initialisation   Russell King
• [PATCH 05/16] ARM: l2c: convert zynq to generic l2c initialisation   Russell King
• [PATCH 06/16] ARM: l2c: convert highbank to generic l2c initialisation   Russell King
• [PATCH 07/16] ARM: l2c: convert tegra to generic l2c initialisation   Russell King
• [PATCH 08/16] ARM: l2c: convert prima2 to generic l2c initialisation   Russell King
• [PATCH 09/16] ARM: l2c: convert vexpress to generic l2c initialisation   Russell King
• [PATCH 10/16] ARM: l2c: convert mvebu to generic l2c initialisation   Russell King
• [PATCH 11/16] ARM: l2c: convert bcm_5301x to generic l2c initialisation   Russell King
• [PATCH 12/16] ARM: l2c: convert imx vf610 to generic l2c initialisation   Russell King
• [PATCH 13/16] ARM: l2c: convert sti to generic l2c initialisation   Russell King
• [PATCH 14/16] ARM: l2c: convert exynos to generic l2c initialisation (and thereby fix it)   Russell King
• [PATCH 15/16] ARM: l2c: convert socfpga to generic l2c initialisation   Russell King
• [PATCH 16/16] ARM: l2c: convert berlin to generic l2c initialisation   Russell King
• [PATCH 01/97] ARM: l2c: remove outer_inv_all() method   Russell King
• [PATCH 02/97] ARM: l2c: remove unnecessary call to outer_flush_all()   Russell King
• [PATCH 03/97] ARM: l2c: avoid calling outer_flush_all() unnecessarily (Spear)   Russell King
• [PATCH 04/97] ARM: l2c: omap2: remove ES1.0 support   Russell King
• [PATCH 05/97] ARM: l2c: remove unnecessary UL-suffix to mask values   Russell King
• [PATCH 06/97] ARM: outer cache: add documentation of outer cache functions   Russell King
• [PATCH 07/97] ARM: outer cache: add WARN_ON() to outer_disable()   Russell King
• [PATCH 08/97] ARM: l2c: add helper for L2 cache controller DT IDs   Russell King
• [PATCH 09/97] ARM: l2c: tidy up l2x0_of_data declarations   Russell King
• [PATCH 10/97] ARM: l2c: rename OF specific things, making l2x0_of_data available to all   Russell King
• [PATCH 11/97] ARM: l2c: provide generic function for calling set_debug method   Russell King
• [PATCH 12/97] ARM: l2c: split out cache unlock code   Russell King
• [PATCH 13/97] ARM: l2c: provide generic helper for way-based operations   Russell King
• [PATCH 14/97] ARM: l2c: rename cache_wait_way()   Russell King
• [PATCH 15/97] ARM: l2c: add and use L2C revision constants   Russell King
• [PATCH 16/97] ARM: l2c: clean up OF initialisation a bit   Russell King
• [PATCH 17/97] ARM: l2c: pass iomem address into data->save function   Russell King
• [PATCH 18/97] ARM: l2c: move l2c save function to __l2c_init()   Russell King
• [PATCH 19/97] ARM: l2c: group implementation specific code together   Russell King
• [PATCH 20/97] ARM: l2c: provide enable method   Russell King
• [PATCH 21/97] ARM: l2c: write auxctrl register before unlocking   Russell King
• [PATCH 22/97] ARM: l2c: only write the auxiliary control register if required   Russell King
• [PATCH 23/97] ARM: l2c: move aurora broadcast setup to enable function   Russell King
• [PATCH 24/97] ARM: l2c: implement fixups for L2 cache controller quirks/errata   Russell King
• [PATCH 25/97] ARM: l2c: clean up L2 cache initialisation messages   Russell King
• [PATCH 26/97] ARM: l2c: move and add ARM L2C-2x0/L2C-310 save/resume code to non-OF   Russell King
• [PATCH 27/97] ARM: l2c: clean up save/resume functions   Russell King
• [PATCH 28/97] ARM: l2c: simplify l2x0 unlocking code   Russell King
• [PATCH 29/97] ARM: l2c: move pl310_set_debug() into l2c-310 code   Russell King
• [PATCH 30/97] ARM: l2c: add L2C-210 specific handlers   Russell King
• [PATCH 31/97] ARM: l2c: implement L2C-310 erratum 727915 as a method override   Russell King
• [PATCH 32/97] ARM: l2c: implement L2C-310 erratum 588369 as a method override   Russell King
• [PATCH 33/97] ARM: l2c: use L2C-210 handlers for L2C-310 errata-less implementations   Russell King
• [PATCH 34/97] ARM: l2c: add L2C-220 specific handlers   Russell King
• [PATCH 35/97] ARM: l2c: convert Broadcom L2C-310 to new code   Russell King
• [PATCH 36/97] ARM: l2c: remove obsolete l2x0 ops for non-OF init   Russell King
• [PATCH 37/97] ARM: l2c: move type string into l2c_init_data structure   Russell King
• [PATCH 38/97] ARM: l2c: add decode for L2C-220 cache ways   Russell King
• [PATCH 39/97] ARM: l2c: move way size calculation data into l2c_init_data   Russell King
• [PATCH 40/97] ARM: l2c: move errata configuration options to arch/arm/mm/Kconfig   Russell King
• [PATCH 41/97] ARM: l2c: provide generic hook to intercept writes to secure registers   Russell King
• [PATCH 42/97] ARM: l2c: omap2: implement new write_sec method   Russell King
• [PATCH 43/97] ARM: l2c: omap2: remove explicit SMI calls to enable L2 cache   Russell King
• [PATCH 44/97] ARM: l2c: highbank: implement new write_sec method   Russell King
• [PATCH 45/97] ARM: l2c: highbank: remove explicit SMI call in L2 cache initialisation   Russell King
• [PATCH 46/97] ARM: l2c: ux500: implement dummy write_sec method   Russell King
• [PATCH 47/97] ARM: l2c: remove old .set_debug method   Russell King
• [PATCH 48/97] ARM: l2c: implement L2C-310 erratum 752271 in core L2C code   Russell King
• [PATCH 49/97] ARM: l2c: fix register naming   Russell King
• [PATCH 50/97] ARM: l2c: add automatic enable of early BRESP   Russell King
• [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP   Russell King
• [PATCH 52/97] ARM: l2c: add platform independent core L2 cache initialisation   Russell King
• [PATCH 53/97] ARM: l2c: provide common PL310 early resume code   Russell King
• [PATCH 54/97] ARM: l2c: tegra: remove associativity and way size from aux_ctrl   Russell King
• [PATCH 55/97] ARM: l2c: ux500: remove associativity and way size from aux_ctrl   Russell King
• [PATCH 56/97] ARM: l2c: ux500: don't try to change the L2 cache auxiliary control register   Russell King
• [PATCH 57/97] ARM: l2c: cns3xxx: remove cache size override   Russell King
• [PATCH 58/97] ARM: l2c: exynos: remove cache size override   Russell King
• [PATCH 59/97] ARM: l2c: exynos: convert to common l2c310 early resume functionality   Russell King
• [PATCH 60/97] ARM: l2c: exynos: convert to generic l2c initialisation (and thereby fix it)   Russell King
• [PATCH 61/97] ARM: l2c: nomadik: remove cache size override   Russell King
• [PATCH 62/97] ARM: l2c: nomadik: convert to generic l2c initialisation   Russell King
• [PATCH 63/97] ARM: l2c: omap2: remove cache size override   Russell King
• [PATCH 64/97] ARM: l2c: prima2: remove cache size override   Russell King
• [PATCH 65/97] ARM: l2c: prima2: convert to generic l2c initialisation   Russell King
• [PATCH 66/97] ARM: l2c: shmobile: remove cache size override   Russell King
• [PATCH 67/97] ARM: l2c: spear13xx: remove cache size override   Russell King
• [PATCH 68/97] ARM: l2c: sti: remove cache size override   Russell King
• [PATCH 69/97] ARM: l2c: sti: convert to generic l2c initialisation   Russell King
• [PATCH 70/97] ARM: l2c: tegra: convert to common l2c310 early resume functionality   Russell King
• [PATCH 71/97] ARM: l2c: convert tegra to generic l2c initialisation   Russell King
• [PATCH 72/97] ARM: l2c: zynq: remove cache size override   Russell King
• [PATCH 73/97] ARM: l2c: zynq: convert to generic l2c initialisation   Russell King
• [PATCH 74/97] ARM: l2c: realview: improve commentry about the L2 cache requirements   Russell King
• [PATCH 75/97] ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this   Russell King
• [PATCH 76/97] ARM: l2c: print a warning with L2C-310 caches if the cache size is modified   Russell King
• [PATCH 77/97] ARM: l2c: vexpress ca9x4: move L2 cache initialisation earlier   Russell King
• [PATCH 78/97] ARM: l2c: check that DT files specify the required "cache-unified" property   Russell King
• [PATCH 79/97] ARM: l2c: add warnings for stuff modifying aux_ctrl register values   Russell King
• [PATCH 80/97] ARM: l2c: trial at enabling some Cortex-A9 optimisations   Russell King
• [PATCH 81/97] ARM: l2c: move L2 cache register saving to a more sensible location   Russell King
• [PATCH 82/97] ARM: l2c: always enable low power modes   Russell King
• [PATCH 83/97] ARM: l2c: imx: remove direct write to power control register   Russell King
• [PATCH 84/97] ARM: l2c: omap2: avoid reading directly from the L2 registers in platform code   Russell King
• [PATCH 85/97] ARM: l2c: imx: convert to common l2c310 early resume functionality   Russell King
• [PATCH 86/97] ARM: l2c: always enable non-secure access to lockdown registers   Russell King
• [PATCH 87/97] ARM: l2c: omap2+: get rid of redundant cache replacement policy setting   Russell King
• [PATCH 88/97] ARM: l2c: omap2+: get rid of init call   Russell King
• [PATCH 89/97] ARM: l2c: AM43x: add L2 cache support   Russell King
• [PATCH 90/97] ARM: l2c: convert rockchip to generic l2c initialisation   Russell King
• [PATCH 91/97] ARM: l2c: convert highbank to generic l2c initialisation   Russell King
• [PATCH 92/97] ARM: l2c: convert vexpress to generic l2c initialisation   Russell King
• [PATCH 93/97] ARM: l2c: convert mvebu to generic l2c initialisation   Russell King
• [PATCH 94/97] ARM: l2c: convert bcm_5301x to generic l2c initialisation   Russell King
• [PATCH 95/97] ARM: l2c: convert imx vf610 to generic l2c initialisation   Russell King
• [PATCH 96/97] ARM: l2c: convert socfpga to generic l2c initialisation   Russell King
• [PATCH 97/97] ARM: l2c: convert berlin to generic l2c initialisation   Russell King
• dma_alloc_coherent and cache?   Troy Kisky
• [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller   Marc Kleine-Budde
• [PATCH v7 1/2] can: xilinx CAN controller support   Marc Kleine-Budde
• [PATCH v7 1/2] can: xilinx CAN controller support   Marc Kleine-Budde
• [PATCH v7 1/2] can: xilinx CAN controller support   Marc Kleine-Budde
• [PATCH v7 1/2] can: xilinx CAN controller support   Marc Kleine-Budde
• can problems on socfpga [was Re: [PATCH v2 4/6] ARM: socfpga: dts: add can0+1]   Marc Kleine-Budde
• [PATCH] fixup! i2c: efm32: new bus driver   Uwe Kleine-König
• [PATCH] pinctrl: capri: make Kconfig dependency more strict   Uwe Kleine-König
• [PATCH] pinctrl: msm8x74: make Kconfig dependency more strict   Uwe Kleine-König
• [PATCH] pinctrl: capri: make Kconfig dependency more strict   Uwe Kleine-König
• [PATCH] i2c: cadence: fix Kconfig dependency   Uwe Kleine-König
• [PATCH] i2c: cadence: fix Kconfig dependency   Uwe Kleine-König
• [PATCH] i2c: cadence: fix Kconfig dependency   Uwe Kleine-König
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Uwe Kleine-König
• The Alphabet (or, the sorting of Kconfig symbols)   Uwe Kleine-König
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Uwe Kleine-König
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Uwe Kleine-König
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Uwe Kleine-König
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Uwe Kleine-König
• [PATCH] clk: sirf: fix a bundle of checkpatch issues   Uwe Kleine-König
• [PATCH 1/2] ahci: imx: use macros to define registers and bits   Uwe Kleine-König
• [PATCH] clocksource: efm32: let CLKSRC_EFM32 select CLKSRC_OF   Uwe Kleine-König
• [PATCH] clocksource: efm32: let CLKSRC_EFM32 select CLKSRC_OF   Uwe Kleine-König
• [PATCH] ARM: fix string functions on !MMU   Uwe Kleine-König
• [PATCH] ARM: fix v7-M setup stack location   Uwe Kleine-König
• [PATCH] ARM: fix v7-M signal return   Uwe Kleine-König
• [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Uwe Kleine-König
• TASK_SIZE for !MMU   Uwe Kleine-König
• [GIT PULL v2] ARM: probes: big-endian support   Taras Kondratiuk
• [PATCH 0/4] ARM: OMAP: raw read and write endian fix   Taras Kondratiuk
• Big endian working?   Taras Kondratiuk
• Big endian working?   Taras Kondratiuk
• [PATCH] ARM: zImage: ensure header in LE format for BE8 kernels   Taras Kondratiuk
• [RESEND PATCH 0/4] ARM: OMAP: raw read and write endian fix   Taras Kondratiuk
• [RESEND PATCH 1/4] ARM: OMAP2+: raw read and write endian fix   Taras Kondratiuk
• [RESEND PATCH 2/4] ARM: OMAP: dmtimer: raw read and write endian fix   Taras Kondratiuk
• [RESEND PATCH 3/4] ARM: OMAP: counter-32k: raw read and write endian fix   Taras Kondratiuk
• [RESEND PATCH 4/4] ARM: OMAP: debug-leds: raw read and write endian fix   Taras Kondratiuk
• [PATCH 0/5] GPIO OMAP driver changes for v3.16   Aaro Koskinen
• [PATCH 0/5] GPIO OMAP driver changes for v3.16   Aaro Koskinen
• [PATCH 07/11] ARM: dts: Enable N900 keybaord sleep leds by default   Aaro Koskinen
• [PATCH 00/26] OMAP dma engine rework   Vinod Koul
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Vinod Koul
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Vinod Koul
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Vinod Koul
• [PATCH v2 03/14] dma: edma: Add support for DMA_PAUSE/RESUME operation   Vinod Koul
• [PATCH v2 08/14] DMA: edma: Use different eventq for cyclic channels   Vinod Koul
• [PATCH v2 00/14] dma: edma: Fixes for cyclic (audio) operation   Vinod Koul
• [PATCH] dma: fix eDMA driver as a subsys_initcall   Vinod Koul
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Vinod Koul
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Vinod Koul
• [PATCH v7 2/2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Vinod Koul
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Vinod Koul
• [PATCH v7 2/2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Vinod Koul
• [PATCH v2 2/2] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Vinod Koul
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Vinod Koul
• [PATCH v3 09/10] dmaengine: edma: Add channel number to debug prints   Vinod Koul
• [PATCH v3 00/10] dma: edma: Fixes for cyclic (audio) operation   Vinod Koul
• [PATCH] dmaengine: edma: Add DMA memcpy support   Vinod Koul
• [PATCH] dmaengine: edma: No need save/restore interrupt flags during spin_lock in IRQ   Vinod Koul
• [RESEND] dmaengine: edma: Add channel number to debug prints   Vinod Koul
• [PATCH] arm: edma: Fix xbar mapping   Vinod Koul
• [patch V2 0/6] dma: edma: Provide granular residue accounting   Vinod Koul
• [patch V2 0/6] dma: edma: Provide granular residue accounting   Vinod Koul
• [PATCH v8 1/2] dma: Add Xilinx Video DMA DT Binding Documentation   Vinod Koul
• [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Vinod Koul
• exynos4: cpu hotplug + cpuidle/AFTR broken   Krzysztof Kozlowski
• [PATCH v4 00/16] mfd: max14577: Add support for MAX77836   Krzysztof Kozlowski
• [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging   Krzysztof Kozlowski
• [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging   Krzysztof Kozlowski
• [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging   Krzysztof Kozlowski
• [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging   Krzysztof Kozlowski
• [patch 0/4] genirq/exynos timers: Fix the CPU hotplug wreckage sanely   Krzysztof Kozlowski
• [PATCH 00/55]: ARM: OMAP2+: PRCM move to drivers   Tero Kristo
• [PATCH] ARM: DTS: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shift   Tero Kristo
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Tero Kristo
• [PATCH 00/55]: ARM: OMAP2+: PRCM move to drivers   Tero Kristo
• [PATCH 00/18] ARM: OMAP2+: CM/PRM cleanup set   Tero Kristo
• [PATCH] ARM: AM43xx: clk: Change the wdt1 func clk src to per_32k clk   Tero Kristo
• [PATCH] arm/omap4: add twd clock to DT   Tero Kristo
• [PATCH] arm: dts: am43x-clock: add tbclk data for ehrpwm.   Tero Kristo
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Tero Kristo
• [PATCH] arm: dts: am43x-clock: add tbclk data for ehrpwm.   Tero Kristo
• [PATCH] arm: dts: am33xx-clock: Fix ehrpwm tbclk data.   Tero Kristo
• [PATCH] arm: dts: am43x-clock: add tbclk data for ehrpwm.   Tero Kristo
• [PATCH 1/2] ARM: DTS: omap54xx-clocks: remove the autoidle properties for clock nodes   Tero Kristo
• [PATCH 2/2] ARM: DTS: omap54xx-clocks: Correct abe_iclk clock node   Tero Kristo
• [PATCH v6 1/3] tty/serial: Add GPIOLIB helpers for controlling modem lines   Greg Kroah-Hartman
• [PATCH 2/3] ARM: at91: at91sam9g45: change at91_adc name   Greg Kroah-Hartman
• [GIT PULL] serial: Cadence   Greg Kroah-Hartman
• [RESEND PATCH v3 1/9] tty: xuartps: Fix kernel-doc errors in the driver   Greg Kroah-Hartman
• [GIT PULL] serial: Cadence   Greg Kroah-Hartman
• [PATCH 0/5] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c   Greg Kroah-Hartman
• [PATCH v4] drivercore: deferral race condition fix   Greg Kroah-Hartman
• [RFC PATCH 0/4] drivers/base: Generic framework for tracking internal interfaces   Greg Kroah-Hartman
• [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Heikki Krogerus
• [PATCHv3 1/5] ARM: tegra: remove obsolete gpio entries   Heikki Krogerus
• [PATCHv3 2/5] net: rfkill: gpio: remove unused and obsolete platform parameters   Heikki Krogerus
• [PATCHv3 3/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenovo Miix2   Heikki Krogerus
• [PATCHv3 4/5] net: rfkill: gpio: add ACPI IDs for a Broadcom bluetooth chip   Heikki Krogerus
• [PATCHv3 5/5] net: rfkill: gpio: hard-code the gpio names   Heikki Krogerus
• [PATCHv3 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Heikki Krogerus
• [PATCH] ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7   Tim Kryger
• [PATCH] ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7   Tim Kryger
• [RESEND PATCH v5 0/5] Add Broadcom Kona PWM Support   Tim Kryger
• [RESEND PATCH v5 1/5] Documentation: dt: Add Kona PWM binding   Tim Kryger
• [RESEND PATCH v5 2/5] pwm: kona: Introduce Kona PWM controller support   Tim Kryger
• [RESEND PATCH v5 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)   Tim Kryger
• [RESEND PATCH v5 4/5] ARM: dts: Enable the PWM for bcm28155 AP board   Tim Kryger
• [RESEND PATCH v5 5/5] ARM: bcm_defconfig: Enable PWM and Backlight   Tim Kryger
• [PATCH 2/5] ARM: add SMP support for Broadcom mobile SoCs   Tim Kryger
• [RESEND PATCH v5 0/5] Add Broadcom Kona PWM Support   Tim Kryger
• [RESEND PATCH v5 1/5] Documentation: dt: Add Kona PWM binding   Tim Kryger
• [RESEND PATCH v5 2/5] pwm: kona: Introduce Kona PWM controller support   Tim Kryger
• [RESEND PATCH v5 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)   Tim Kryger
• [RESEND PATCH v5 4/5] ARM: dts: Enable the PWM for bcm28155 AP board   Tim Kryger
• [RESEND PATCH v5 5/5] ARM: bcm_defconfig: Enable PWM and Backlight   Tim Kryger
• [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures   Tim Kryger
• [PATCH v6 0/5] Add Broadcom Kona PWM Support   Tim Kryger
• [PATCH v6 1/5] Documentation: dt: Add Kona PWM binding   Tim Kryger
• [PATCH v6 2/5] pwm: kona: Introduce Kona PWM controller support   Tim Kryger
• [PATCH v6 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)   Tim Kryger
• [PATCH v6 4/5] ARM: dts: Enable the PWM for bcm28155 AP board   Tim Kryger
• [PATCH v6 5/5] ARM: bcm_defconfig: Enable PWM and Backlight   Tim Kryger
• [PATCH v6 RESEND 0/5] Add Broadcom Kona PWM Support   Tim Kryger
• [PATCH v6 RESEND 1/5] Documentation: dt: Add Kona PWM binding   Tim Kryger
• [PATCH v6 RESEND 2/5] pwm: kona: Introduce Kona PWM controller support   Tim Kryger
• [PATCH v6 RESEND 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)   Tim Kryger
• [PATCH v6 RESEND 4/5] ARM: dts: Enable the PWM for bcm28155 AP board   Tim Kryger
• [PATCH v6 RESEND 5/5] ARM: bcm_defconfig: Enable PWM and Backlight   Tim Kryger
• [PATCH v6 RESEND 0/5] Add Broadcom Kona PWM Support   Tim Kryger
• [PATCH V8 1/9] clk: SPEAr13XX: Fix pcie clock name   Mohit Kumar
• [PATCH V8 2/9] SPEAr13XX: Fix static mapping table   Mohit Kumar
• [PATCH V8 7/9] SPEAr13XX: dts: Add PCIe node information   Mohit Kumar
• [PATCH V8 9/9] SPEAr13xx: defconfig: Update   Mohit Kumar
• [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support   Mohit Kumar
• [PATCH V8 1/9] clk: SPEAr13XX: Fix pcie clock name   Mohit Kumar
• [PATCH V8 2/9] SPEAr13XX: Fix static mapping table   Mohit Kumar
• [PATCH V8 3/9] phy: SPEAr1310/40-miphy: Add binding information   Mohit Kumar
• [PATCH V8 4/9] SPEAr: misc: Add binding information   Mohit Kumar
• [PATCH V8 5/9] phy: SPEAr1310/40-miphy: Add phy driver for PCIe and SATA   Mohit Kumar
• [PATCH V8 6/9] SPEAr13XX: Add binding information for PCIe controller   Mohit Kumar
• [PATCH V8 7/9] SPEAr13XX: dts: Add PCIe node information   Mohit Kumar
• [PATCH V8 8/9] pcie: SPEAr13xx: Add designware wrapper support   Mohit Kumar
• [PATCH V8 9/9] SPEAr13xx: defconfig: Update   Mohit Kumar
• [PATCH] pata_arasan_cf: fix ata_host_activate() failure handling   Viresh Kumar
• arm64/cqufreq Kconfig error with v3.14-3893-gc12e69c6aaf7   Viresh Kumar
• [PATCH] arm64: Fix duplicated Kconfig entries again   Viresh Kumar
• [PATCH] arm64: Fix duplicated Kconfig entries again   Viresh Kumar
• [PATCH] arm64: Fix duplicated Kconfig entries again   Viresh Kumar
• [PATCH] ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig"   Viresh Kumar
• [PATCH 01/17] ARM: exynos: cpuidle: Prevent forward declaration   Viresh Kumar
• [PATCH 02/17] ARM: exynos: cpuidle: use cpuidle_register   Viresh Kumar
• [PATCH 03/17] ARM: exynos: cpuidle: change function name prefix   Viresh Kumar
• [PATCH 04/17] ARM: exynos: cpuidle: encapsulate register access inside a function   Viresh Kumar
• [PATCH 05/17] ARM: exynos: cpuidle: Move some code inside the idle_finisher   Viresh Kumar
• [PATCH 06/17] ARM: exynos: cpuidle: Fix S5P_WAKEUP_STAT call   Viresh Kumar
• [PATCH 08/17] ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier   Viresh Kumar
• [PATCH 09/17] ARM: exynos: cpuidle: Remove ifdef for scu_enable   Viresh Kumar
• [PATCH 10/17] ARM: exynos: cpuidle: Move exynos_set_wakeupmask in the cpu_pm notifier   Viresh Kumar
• [PATCH 11/17] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier   Viresh Kumar
• [PATCH 12/17] ARM: exynos: cpuidle: Move S5P_CHECK_AFTR in a header   Viresh Kumar
• [PATCH 13/17] ARM: exynos: cpuidle: Move clock setup to pm.c   Viresh Kumar
• [PATCH 14/17] ARM: exynos: cpuidle: Move the boot vector in pm.c   Viresh Kumar
• [PATCH 16/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory   Viresh Kumar
• [PATCH 15/17] ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data   Viresh Kumar
• [PATCH 17/17] ARM: exynos: config: Enable cpuidle   Viresh Kumar
• [PATCH RESEND] ARM: spear: add __init to spear_clocksource_init()   Viresh Kumar
• ARM: Zynq: CPUFreq issues in setting frequencies (Was: Re: Help about PetaLinux)   Viresh Kumar
• [PATCH v2] pata_arasan_cf: fix ata_host_activate() failure handling   Viresh Kumar
• [PATCH 07/20] cpufreq: exynos: Use cpufreq_for_each_entry macro for iteration   Viresh Kumar
• [PATCH 08/20] cpufreq: exynos5440: Use cpufreq_for_each_entry macro for iteration   Viresh Kumar
• [PATCH v2 5/8] mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration   Viresh Kumar
• [PATCH 1/2] cpufreq: exynos: Use dev_err/info function instead of pr_err/info   Viresh Kumar
• [PATCH v2 3/8] davinci: da850: Use cpufreq_for_each_entry macro for iteration   Viresh Kumar
• [PATCH 2/2] cpufreq: Remove exynos_sort_descend_freq_table in exynos5440-cpufreq.c   Viresh Kumar
• [PATCH 2/2] cpufreq: Remove exynos_sort_descend_freq_table in exynos5440-cpufreq.c   Viresh Kumar
• [PATCH 1/2] drm/exynos/fbdev: don't set fix.smem/mmio_{start,len}   Daniel Kurtz
• [PATCH 2/2] drm/exynos/fbdev: don't set mode_config.fb_base   Daniel Kurtz
• [PATCH v11 12/27] ARM: dts: Add description of System MMU of Exynos SoCs   Cho KyongHo
• [PATCH v11 20/27] iommu/exynos: allow having multiple System MMUs for a master H/W   Cho KyongHo
• [PATCH v4 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Prabhakar Lad
• [PATCH v5 2/8] cpufreq: Use cpufreq_for_each_* macros for frequency table iteration   Prabhakar Lad
• [PATCH] ARM: configs: drop CONFIG_COMMON_CLK_DEBUG   Prabhakar Lad
• [linux-sunxi] [PATCH v5 0/3] ARM: sunxi: Add support for consumer infrared devices   Priit Laes
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   David Laight
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   David Laight
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   David Laight
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   David Laight
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   David Laight
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   David Laight
• [3.15-rc1] a huge number of warnings produced by xhci &   Christoph Lameter
• [PATCH v9 05/17] ARM: dts: sun4i: Add pin-muxing info for the mmc0 controller   David Lanzendörfer
• [PATCH] ARM: vexpress: Add CPU clock frequencies to TC1 device tree   Francesco Lavra
• [RFC] ARM64: 4 level page table translation for 4KB pages   Jungseok Lee
• [RFC] ARM64: 4 level page table translation for 4KB pages   Jungseok Lee
• [PATCH 0/8] Support 4 levels of translation tables for ARM64   Jungseok Lee
• [PATCH 1/8] arm64: Use pr_* instead of printk   Jungseok Lee
• [PATCH 2/8] arm/arm64: KVM: Fix line length exceeding 80 characters   Jungseok Lee
• [PATCH 3/8] arm64: Decouple page size from level of translation   Jungseok Lee
• [PATCH 4/8] arm64: Introduce a kernel configuration option for VA_BITS   Jungseok Lee
• [PATCH 5/8] arm64: Add a description on 48-bit address space with 4KB pages   Jungseok Lee
• [PATCH 6/8] arm64: Add 4 levels of page tables definition with 4KB pages   Jungseok Lee
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH 8/8] arm64: KVM: Implement 4 levels of translation tables for HYP and stage2   Jungseok Lee
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH 2/8] arm/arm64: KVM: Fix line length exceeding 80 characters   Jungseok Lee
• [PATCH 8/8] arm64: KVM: Implement 4 levels of translation tables for HYP and stage2   Jungseok Lee
• [PATCH 7/8] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v2 0/7] Support 4 levels of translation tables for ARM64   Jungseok Lee
• [PATCH v2 1/7] arm64: Use pr_* instead of printk   Jungseok Lee
• [PATCH v2 2/7] arm64: Decouple page size from level of translation tables   Jungseok Lee
• [PATCH v2 3/7] arm64: Introduce a kernel configuration option for VA_BITS   Jungseok Lee
• [PATCH v2 4/7] arm64: Add a description on 48-bit address space with 4KB pages   Jungseok Lee
• [PATCH v2 5/7] arm64: Add 4 levels of page tables definition with 4KB pages   Jungseok Lee
• [PATCH v2 6/7] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v2 7/7] arm64: KVM: Implement 4 levels of translation tables for HYP and stage2   Jungseok Lee
• [PATCH v2 7/7] arm64: KVM: Implement 4 levels of translation tables for HYP and stage2   Jungseok Lee
• [PATCH v3 0/7] Support 4 levels of translation tables for ARM64   Jungseok Lee
• [PATCH v3 1/7] arm64: Use pr_* instead of printk   Jungseok Lee
• [PATCH v3 2/7] arm64: Decouple page size from level of translation tables   Jungseok Lee
• [PATCH v3 3/7] arm64: Introduce a kernel configuration option for VA_BITS   Jungseok Lee
• [PATCH v3 4/7] arm64: Add a description on 48-bit address space with 4KB pages   Jungseok Lee
• [PATCH v3 5/7] arm64: Add 4 levels of page tables definition with 4KB pages   Jungseok Lee
• [PATCH v3 6/7] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v3 7/7] arm64: KVM: Implement 4 levels of translation tables for HYP and stage2   Jungseok Lee
• [PATCH v3 6/7] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v3 6/7] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v3 6/7] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v4 0/7] Support 4 levels of translation tables for ARM64   Jungseok Lee
• [PATCH v4 1/7] arm64: Use pr_* instead of printk   Jungseok Lee
• [PATCH v4 2/7] arm64: Decouple page size from level of translation tables   Jungseok Lee
• [PATCH v4 3/7] arm64: Introduce a kernel configuration option for VA_BITS   Jungseok Lee
• [PATCH v4 4/7] arm64: Add a description on 48-bit address space with 4KB pages   Jungseok Lee
• [PATCH v4 5/7] arm64: Add 4 levels of page tables definition with 4KB pages   Jungseok Lee
• [PATCH v4 6/7] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v4 7/7] arm64: KVM: Implement 4 levels of translation tables for HYP and stage2   Jungseok Lee
• [PATCH v4 3/7] arm64: Introduce a kernel configuration option for VA_BITS   Jungseok Lee
• [PATCH v4 6/7] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v4 1/7] arm64: Use pr_* instead of printk   Jungseok Lee
• [PATCH v4 2/7] arm64: Decouple page size from level of translation tables   Jungseok Lee
• [PATCH v4 4/7] arm64: Add a description on 48-bit address space with 4KB pages   Jungseok Lee
• [PATCH v4 4/7] arm64: Add a description on 48-bit address space with 4KB pages   Jungseok Lee
• [PATCH v5 0/6] Support 4 levels of translation tables for ARM64   Jungseok Lee
• [PATCH v5 1/6] arm64: Use pr_* instead of printk   Jungseok Lee
• [PATCH v5 2/6] arm64: Introduce VA_BITS and translation level options   Jungseok Lee
• [PATCH v5 3/6] arm64: Add a description on 48-bit address space with 4KB pages   Jungseok Lee
• [PATCH v5 4/6] arm64: Add 4 levels of page tables definition with 4KB pages   Jungseok Lee
• [PATCH v5 5/6] arm64: mm: Implement 4 levels of translation tables   Jungseok Lee
• [PATCH v5 6/6] arm64: KVM: Implement 4 levels of translation tables for HYP and stage2   Jungseok Lee
• [PATCH arm64 bootwrapper] Fix maintainer-clean make target   Geoff Levand
• [PATCH] arm64: Fix PSCI part of booting.txt   Geoff Levand
• [PATCH V2] arm64: Fix PSCI part of booting.txt   Geoff Levand
• exynos4: cpu hotplug + cpuidle/AFTR broken   Daniel Lezcano
• exynos4: cpu hotplug + cpuidle/AFTR broken   Daniel Lezcano
• exynos4: cpu hotplug + cpuidle/AFTR broken   Daniel Lezcano
• exynos4: cpu hotplug + cpuidle/AFTR broken   Daniel Lezcano
• [PATCH v6 10/11] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Daniel Lezcano
• [PATCH v6 09/11] ARM: mvebu: Register notifier callback for the cpuidle transition   Daniel Lezcano
• [PATCH 00/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Daniel Lezcano
• [PATCH 01/17] ARM: exynos: cpuidle: Prevent forward declaration   Daniel Lezcano
• [PATCH 02/17] ARM: exynos: cpuidle: use cpuidle_register   Daniel Lezcano
• [PATCH 03/17] ARM: exynos: cpuidle: change function name prefix   Daniel Lezcano
• [PATCH 04/17] ARM: exynos: cpuidle: encapsulate register access inside a function   Daniel Lezcano
• [PATCH 05/17] ARM: exynos: cpuidle: Move some code inside the idle_finisher   Daniel Lezcano
• [PATCH 06/17] ARM: exynos: cpuidle: Fix S5P_WAKEUP_STAT call   Daniel Lezcano
• [PATCH 07/17] ARM: exynos: cpuidle: Use the cpu_pm notifier   Daniel Lezcano
• [PATCH 08/17] ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier   Daniel Lezcano
• [PATCH 09/17] ARM: exynos: cpuidle: Remove ifdef for scu_enable   Daniel Lezcano
• [PATCH 10/17] ARM: exynos: cpuidle: Move exynos_set_wakeupmask in the cpu_pm notifier   Daniel Lezcano
• [PATCH 11/17] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier   Daniel Lezcano
• [PATCH 12/17] ARM: exynos: cpuidle: Move S5P_CHECK_AFTR in a header   Daniel Lezcano
• [PATCH 13/17] ARM: exynos: cpuidle: Move clock setup to pm.c   Daniel Lezcano
• [PATCH 14/17] ARM: exynos: cpuidle: Move the boot vector in pm.c   Daniel Lezcano
• [PATCH 15/17] ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data   Daniel Lezcano
• [PATCH 16/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory   Daniel Lezcano
• [PATCH 17/17] ARM: exynos: config: Enable cpuidle   Daniel Lezcano
• [PATCH 05/17] ARM: exynos: cpuidle: Move some code inside the idle_finisher   Daniel Lezcano
• [PATCH 08/17] ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier   Daniel Lezcano
• [PATCH 17/17] ARM: exynos: config: Enable cpuidle   Daniel Lezcano
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Daniel Lezcano
• [PATCH 00/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Daniel Lezcano
• [PATCH V2 00/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Daniel Lezcano
• [PATCH V2 01/17] ARM: exynos: cpuidle: Prevent forward declaration   Daniel Lezcano
• [PATCH V2 02/17] ARM: exynos: cpuidle: use cpuidle_register   Daniel Lezcano
• [PATCH V2 03/17] ARM: exynos: cpuidle: change function name prefix   Daniel Lezcano
• [PATCH V2 04/17] ARM: exynos: cpuidle: encapsulate register access inside a function   Daniel Lezcano
• [PATCH V2 05/17] ARM: exynos: cpuidle: Move some code inside the idle_finisher   Daniel Lezcano
• [PATCH V2 06/17] ARM: exynos: cpuidle: Fix S5P_WAKEUP_STAT call   Daniel Lezcano
• [PATCH V2 07/17] ARM: exynos: cpuidle: Use the cpu_pm notifier   Daniel Lezcano
• [PATCH V2 08/17] ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier   Daniel Lezcano
• [PATCH V2 09/17] ARM: exynos: cpuidle: Remove ifdef for scu_enable   Daniel Lezcano
• [PATCH V2 10/17] ARM: exynos: cpuidle: Move exynos_set_wakeupmask in the cpu_pm notifier   Daniel Lezcano
• [PATCH V2 11/17] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier   Daniel Lezcano
• [PATCH V2 12/17] ARM: exynos: cpuidle: Move S5P_CHECK_AFTR in a header   Daniel Lezcano
• [PATCH V2 13/17] ARM: exynos: cpuidle: Move clock setup to pm.c   Daniel Lezcano
• [PATCH V2 14/17] ARM: exynos: cpuidle: Move the boot vector in pm.c   Daniel Lezcano
• [PATCH V2 15/17] ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data   Daniel Lezcano
• [PATCH V2 16/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory   Daniel Lezcano
• [PATCH V2 17/17] ARM: exynos: config: Enable cpuidle   Daniel Lezcano
• [PATCH V2 17/17] ARM: exynos: config: Enable cpuidle   Daniel Lezcano
• [PATCH V2 16/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory   Daniel Lezcano
• [PATCH V3 00/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Daniel Lezcano
• [PATCH V3 01/17] ARM: exynos: cpuidle: Prevent forward declaration   Daniel Lezcano
• [PATCH V3 02/17] ARM: exynos: cpuidle: use cpuidle_register   Daniel Lezcano
• [PATCH V3 03/17] ARM: exynos: cpuidle: change function name prefix   Daniel Lezcano
• [PATCH V3 04/17] ARM: exynos: cpuidle: encapsulate register access inside a function   Daniel Lezcano
• [PATCH V3 05/17] ARM: exynos: cpuidle: Move some code inside the idle_finisher   Daniel Lezcano
• [PATCH V3 06/17] ARM: exynos: cpuidle: Fix S5P_WAKEUP_STAT call   Daniel Lezcano
• [PATCH V3 07/17] ARM: exynos: cpuidle: Use the cpu_pm notifier   Daniel Lezcano
• [PATCH V3 08/17] ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier   Daniel Lezcano
• [PATCH V3 09/17] ARM: exynos: cpuidle: Remove ifdef for scu_enable   Daniel Lezcano
• [PATCH V3 10/17] ARM: exynos: cpuidle: Move exynos_set_wakeupmask in the cpu_pm notifier   Daniel Lezcano
• [PATCH V3 11/17] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier   Daniel Lezcano
• [PATCH V3 12/17] ARM: exynos: cpuidle: Move S5P_CHECK_AFTR in a header   Daniel Lezcano
• [PATCH V3 13/17] ARM: exynos: cpuidle: Move clock setup to pm.c   Daniel Lezcano
• [PATCH V3 14/17] ARM: exynos: cpuidle: Move the boot vector in pm.c   Daniel Lezcano
• [PATCH V3 15/17] ARM: exynos: cpuidle: Disable cpuidle for 5440   Daniel Lezcano
• [PATCH V3 16/17] ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data   Daniel Lezcano
• [PATCH V3 17/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory   Daniel Lezcano
• [PATCH V3 15/17] ARM: exynos: cpuidle: Disable cpuidle for 5440   Daniel Lezcano
• [PATCH V3 11/17] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier   Daniel Lezcano
• [PATCH V4 00/20] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Daniel Lezcano
• [PATCH V4 01/20] ARM: exynos: cpuidle: Prevent forward declaration   Daniel Lezcano
• [PATCH V4 02/20] ARM: exynos: cpuidle: Use cpuidle_register   Daniel Lezcano
• [PATCH V4 03/20] ARM: exynos: cpuidle: Change function name prefix   Daniel Lezcano
• [PATCH V4 04/20] ARM: exynos: cpuidle: Encapsulate register access inside a function   Daniel Lezcano
• [PATCH V4 05/20] ARM: exynos: cpuidle: Move some code inside the idle_finisher   Daniel Lezcano
• [PATCH V4 06/20] ARM: exynos: cpuidle: Fix S5P_WAKEUP_STAT call   Daniel Lezcano
• [PATCH V4 07/20] ARM: exynos: cpuidle: Use the cpu_pm notifier   Daniel Lezcano
• [PATCH V4 08/20] ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier   Daniel Lezcano
• [PATCH V4 09/20] ARM: exynos: cpuidle: Remove ifdef for scu_enable   Daniel Lezcano
• [PATCH V4 10/20] ARM: exynos: cpuidle: Move clock setup to pm.c   Daniel Lezcano
• [PATCH V4 11/20] ARM: exynos: cpuidle: Pass wakeup mask parameter to function   Daniel Lezcano
• [PATCH V4 12/20] ARM: exynos: cpuidle: Encapsulate boot vector code into a function   Daniel Lezcano
• [PATCH V4 13/20] ARM: exynos: cpuidle: Disable cpuidle for 5440   Daniel Lezcano
• [PATCH V4 14/20] ARM: exynos: cpuidle: Encapsulate the AFTR code into a function   Daniel Lezcano
• [PATCH V4 15/20] ARM: exynos: cpuidle: Move the AFTR state function into pm.c   Daniel Lezcano
• [PATCH V4 16/20] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier   Daniel Lezcano
• [PATCH V4 17/20] ARM: exynos: cpuidle: Move S5P_CHECK_SLEEP into pm.c   Daniel Lezcano
• [PATCH V4 18/20] ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data   Daniel Lezcano
• [PATCH V4 19/20] ARM: exynos: cpuidle: Cleanup all unneeded headers from cpuidle.c   Daniel Lezcano
• [PATCH V4 20/20] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory   Daniel Lezcano
• [PATCH V4 10/20] ARM: exynos: cpuidle: Move clock setup to pm.c   Daniel Lezcano
• [PATCH V4 10/20] ARM: exynos: cpuidle: Move clock setup to pm.c   Daniel Lezcano
• [PATCH V4 10/20] ARM: exynos: cpuidle: Move clock setup to pm.c   Daniel Lezcano
• [PATCH V5 00/20] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Daniel Lezcano
• [PATCH V5 01/20] ARM: EXYNOS: Move arm core power down clock to exynos5250 common clock   Daniel Lezcano
• [PATCH V5 02/20] ARM: exynos: cpuidle: Prevent forward declaration   Daniel Lezcano
• [PATCH V5 03/20] ARM: exynos: cpuidle: Use cpuidle_register   Daniel Lezcano
• [PATCH V5 04/20] ARM: exynos: cpuidle: Change function name prefix   Daniel Lezcano
• [PATCH V5 05/20] ARM: exynos: cpuidle: Encapsulate register access inside a function   Daniel Lezcano
• [PATCH V5 06/20] ARM: exynos: cpuidle: Move some code inside the idle_finisher   Daniel Lezcano
• [PATCH V5 07/20] ARM: exynos: cpuidle: Fix S5P_WAKEUP_STAT call   Daniel Lezcano
• [PATCH V5 08/20] ARM: exynos: cpuidle: Use the cpu_pm notifier   Daniel Lezcano
• [PATCH V5 09/20] ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier   Daniel Lezcano
• [PATCH V5 10/20] ARM: exynos: cpuidle: Remove ifdef for scu_enable   Daniel Lezcano
• [PATCH V5 11/20] ARM: exynos: cpuidle: Pass wakeup mask parameter to function   Daniel Lezcano
• [PATCH V5 12/20] ARM: exynos: cpuidle: Encapsulate boot vector code into a function   Daniel Lezcano
• [PATCH V5 13/20] ARM: exynos: cpuidle: Disable cpuidle for 5440   Daniel Lezcano
• [PATCH V5 14/20] ARM: exynos: cpuidle: Encapsulate the AFTR code into a function   Daniel Lezcano
• [PATCH V5 15/20] ARM: exynos: cpuidle: Move the AFTR state function into pm.c   Daniel Lezcano
• [PATCH V5 16/20] ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier   Daniel Lezcano
• [PATCH V5 17/20] ARM: exynos: cpuidle: Move S5P_CHECK_SLEEP into pm.c   Daniel Lezcano
• [PATCH V5 18/20] ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data   Daniel Lezcano
• [PATCH V5 19/20] ARM: exynos: cpuidle: Cleanup all unneeded headers from cpuidle.c   Daniel Lezcano
• [PATCH V5 20/20] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory   Daniel Lezcano
• [PATCH V5 00/20] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle   Daniel Lezcano
• [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging   Daniel Lezcano
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Daniel Lezcano
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Daniel Lezcano
• [PATCH v2 1/4] clocksource: arm_global_timer: Only check for unusable timer on A9   Daniel Lezcano
• [PATCH] driver: clocksource: fix age-old arch timer C3STOP detection issue   Daniel Lezcano
• [RFC][PATCH 1/3] ARM: dts: vf610: Add Freescale FlexTimer Module timer node.   Daniel Lezcano
• [PATCH] clocksource: efm32: let CLKSRC_EFM32 select CLKSRC_OF   Daniel Lezcano
• [PATCH] clocksource: efm32: let CLKSRC_EFM32 select CLKSRC_OF   Daniel Lezcano
• [RFC][PATCH 3/3] clocksource: Add Freescale FlexTimer Module (FTM) timer support   Daniel Lezcano
• [PATCH 3/4] exynos: cpuidle: do not allow cpuidle registration for Exynos5420   Daniel Lezcano
• [PATCH 2/4] driver: cpuidle: cpuidle-big-little: init driver for Exynos5420   Daniel Lezcano
• [PATCH 1/4] cpuidle: config: Add SOC_EXYNOS5420 entry to select cpuidle-big-little driver   Daniel Lezcano
• [PATCH 4/4] mcpm: exynos: populate suspend and powered_up callbacks   Daniel Lezcano
• [PATCH 2/4] driver: cpuidle: cpuidle-big-little: init driver for Exynos5420   Daniel Lezcano
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Daniel Lezcano
• [PATCH v3 0/2] ARM: sunxi: Add A31 High Speed Timer Support   Daniel Lezcano
• [PATCH] ARM: EXYNOS: cpu hotplug: use v7_exit_coherency_flush macro for cache disabling   Daniel Lezcano
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Daniel Lezcano
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Daniel Lezcano
• [PATCH 0/2] Add generic cpu power control functions for exynos   Daniel Lezcano
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Daniel Lezcano
• [PATCH v3 6/6] arm: exynos: Add /dev/bL_status user interface on Exynos5420   Daniel Lezcano
• Perf top always show 0.00   Frank Li
• Perf top always show 0.00   Frank Li
• [PATCH 071/222] net:fec: remove unnecessary ip stack includes   Frank Li
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Frank Li
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Frank Li
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Frank Li
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Frank Li
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Frank Li
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Frank Li
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Frank Li
• [PATCH] of: Fix the section mismatch warnings.   Xiubo Li
• [RFC][PATCH 0/3] Add Freescale FlexTimer Module timer.   Xiubo Li
• [RFC][PATCH 1/3] ARM: dts: vf610: Add Freescale FlexTimer Module timer node.   Xiubo Li
• [RFC][PATCH 2/3] ARM: dts: vf610-twr: Enable Freescale FlexTimer Module timer.   Xiubo Li
• [RFC][PATCH 3/3] clocksource: Add Freescale FlexTimer Module (FTM) timer support   Xiubo Li
• [PATCH 0/3] clocksource: Add Freescale FlexTimer Module (FTM) timer support   Xiubo Li
• [PATCH 1/3] clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation   Xiubo Li
• [PATCH 2/3] ARM: dts: vf610: Add Freescale FlexTimer Module timer node.   Xiubo Li
• [PATCH 3/3] clocksource: Add Freescale FlexTimer Module (FTM) timer support   Xiubo Li
• [PATCHv2 0/3] clocksource: Add Freescale FlexTimer Module (FTM) timer support   Xiubo Li
• [PATCHv2 1/3] clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation   Xiubo Li
• [PATCHv2 2/3] ARM: dts: vf610: Add Freescale FlexTimer Module timer node.   Xiubo Li
• [PATCHv2 3/3] clocksource: Add Freescale FlexTimer Module (FTM) timer support   Xiubo Li
• [PATCH] serial: amba-pl011: fix regression, causing an Oops on rmmod   Guennadi Liakhovetski
• [PATCH 0/2] ARM: dts: sbc-t54: add support for sbc-t54 with cm-t54   Dmitry Lifshitz
• [PATCH 1/2] ARM: dts: sbc-t54: add support for sbc-t54 with cm-t54   Dmitry Lifshitz
• [PATCH 2/2] ARM: dts: cm-t54: add WiFi/BT support   Dmitry Lifshitz
• [PATCH v2 0/2] ARM: dts: sbc-t54: add support for sbc-t54 with cm-t54   Dmitry Lifshitz
• [PATCH v2 1/2] ARM: dts: sbc-t54: add support for sbc-t54 with cm-t54   Dmitry Lifshitz
• [PATCH v2 2/2] ARM: dts: cm-t54: add WiFi/BT support   Dmitry Lifshitz
• [RFC v2] ARM VM System Specification   Grant Likely
• mach header files   Grant Likely
• The Alphabet (or, the sorting of Kconfig symbols)   Grant Likely
• mach header files   Grant Likely
• mach header files   Grant Likely
• [PATCH 1/3] arm: dts: add device_type="memory" for ste-ccu8540   Grant Likely
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Grant Likely
• [PATCH 2/2] of/irq: do irq resolution in platform_get_irq   Grant Likely
• [PATCH 2/2] of/irq: do irq resolution in platform_get_irq   Grant Likely
• [PATCH v3 part1 01/11] ACPI / processor: Rework _PDC related stuff to make it more arch-independent   Grant Likely
• [PATCH v3 part1 02/11] ARM64 / ACPI: Introduce the skeleton of _PDC related for ARM64   Grant Likely
• [PATCH v3 part1 03/11] ARM64 : Add dummy asm/cpu.h   Grant Likely
• [PATCH v3 part1 04/11] ARM64 / ACPI: Introduce arm-core.c and its related head file   Grant Likely
• [PATCH v3 part1 05/11] ARM64 / ACPI: Introduce early_param for "acpi"   Grant Likely
• [PATCH v3 part1 11/11] ACPI: Make EC depend on X86 || IA64 in Kconfig   Grant Likely
• [PATCH v4] drivercore: deferral race condition fix   Grant Likely
• [PATCH 01/10] of: Keep track of populated platform devices   Grant Likely
• [PATCH/RFC 3/4] of/clk: Register clocks suitable for Runtime PM with the PM core   Grant Likely
• [PATCH v2 00/21] FDT clean-ups and libfdt support   Grant Likely
• [PATCH v3 4/7] of: configure the platform device dma parameters   Grant Likely
• [PATCH v4] drivercore: deferral race condition fix   Grant Likely
• [RFC v2] ARM VM System Specification   Grant Likely
• [PATCH 0/2] arm64 topology updates   Zi Shen Lim
• [PATCH 1/2] arm64, sched: Remove unused mc_capable() and smt_capable()   Zi Shen Lim
• [PATCH 2/2] arm64: topology: add MPIDR-based detection   Zi Shen Lim
• [PATCH 2/2] arm64: topology: add MPIDR-based detection   Zi Shen Lim
• [PATCH 2/2] arm64: topology: add MPIDR-based detection   Zi Shen Lim
• [PATCHv2 0/2] arm64 topology updates   Zi Shen Lim
• [PATCHv2 1/2] arm64, sched: Remove unused mc_capable() and smt_capable()   Zi Shen Lim
• [PATCHv2 2/2] arm64: topology: add MPIDR-based detection   Zi Shen Lim
• [PATCHv2 2/2] arm64: topology: add MPIDR-based detection   Zi Shen Lim
• [PATCHv3] arm64: topology: add MPIDR-based detection   Zi Shen Lim
• [RESEND][PATCH] mmc: wmt-sdmmc: Fix settting BM_EIGHTBIT_MODE bit in wmt_mci_set_ios()   Axel Lin
• [RESEND][PATCH] mmc: wmt-sdmmc: Remove deprecated IRQF_DISABLED   Axel Lin
• [PATCH] mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value   Axel Lin
• [PATCH 00/55]: ARM: OMAP2+: PRCM move to drivers   Tony Lindgren
• [PATCH 0/4] ARM: OMAP: raw read and write endian fix   Tony Lindgren
• OMAP baseline test results for v3.14   Tony Lindgren
• OMAP baseline test results for v3.14   Tony Lindgren
• OMAP baseline test results for v3.14   Tony Lindgren
• OMAP baseline test results for v3.14   Tony Lindgren
• [PATCHv3 19/41] OMAPDSS: panel-dpi: Add DT support   Tony Lindgren
• [PATCHv3 19/41] OMAPDSS: panel-dpi: Add DT support   Tony Lindgren
• [PATCH 00/11] Fixes for omap PM for making omap3 DT only   Tony Lindgren
• [PATCH 01/11] ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register   Tony Lindgren
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Tony Lindgren
• [PATCH 03/11] ARM: OMAP3: Disable broken omap3_set_off_timings function   Tony Lindgren
• [PATCH 04/11] ARM: OMAP3: Fix voltage control for deeper idle states   Tony Lindgren
• [PATCH 05/11] ARM: dts: Configure omap3 twl4030 I2C4 pins by default   Tony Lindgren
• [PATCH 06/11] ARM: OMAP2+: Fix voltage scaling init for device tree   Tony Lindgren
• [PATCH 07/11] ARM: dts: Enable N900 keybaord sleep leds by default   Tony Lindgren
• [PATCH 08/11] ARM: dts: Fix omap serial wake-up when booted with device tree   Tony Lindgren
• [PATCH 09/11] ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig   Tony Lindgren
• [PATCH 10/11] mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree   Tony Lindgren
• [PATCH 11/11] pinctrl: single: Clear pin interrupts enabled by bootloader   Tony Lindgren
• [PATCH 07/11] ARM: dts: Enable N900 keybaord sleep leds by default   Tony Lindgren
• [PATCH 04/11] ARM: OMAP3: Fix voltage control for deeper idle states   Tony Lindgren
• [PATCH 00/11] Fixes for omap PM for making omap3 DT only   Tony Lindgren
• [PATCH 00/55]: ARM: OMAP2+: PRCM move to drivers   Tony Lindgren
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Tony Lindgren
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Tony Lindgren
• [PATCH] power: twl4030_charger: clear IRQs after handling them   Tony Lindgren
• [PATCH 10/11] mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree   Tony Lindgren
• [PATCH] ARM: dts: am437x-gp-evm: Do not reset gpio5   Tony Lindgren
• [PATCHv3 19/41] OMAPDSS: panel-dpi: Add DT support   Tony Lindgren
• [PATCH 1/4] ARM: dts: Add support for OMAP4 Variscite OM44 family   Tony Lindgren
• [PATCH 1/2] ARM: dts: sbc-t54: add support for sbc-t54 with cm-t54   Tony Lindgren
• [RFC 2/4] ARM: dts: Add ctrl-core DT node for DRA7   Tony Lindgren
• [PATCH 1/4] ARM: dts: Add support for OMAP4 Variscite OM44 family   Tony Lindgren
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Tony Lindgren
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Tony Lindgren
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Tony Lindgren
• [PATCH trivial 1/3] ARM: dts: Grammar /is uses/ is used/   Tony Lindgren
• [PATCH trivial 3/3] ARM: dts: Grammar /that will/it will/   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix config name for USB3 PHY   Tony Lindgren
• [PATCH] ARM: AM335X: EVM: fix pinmux documentation in devicetree   Tony Lindgren
• [PATCH] ARM: DTS: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shift   Tony Lindgren
• [PATCH] arm/omap4: add twd clock to DT   Tony Lindgren
• [PATCH] ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand   Tony Lindgren
• [PATCH 1/4] ARM: dts: Add support for OMAP4 Variscite OM44 family   Tony Lindgren
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Tony Lindgren
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: OMAP hwmod and clock fixes for v3.15-rc   Tony Lindgren
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Tony Lindgren
• [RFC 2/4] ARM: dts: Add ctrl-core DT node for DRA7   Tony Lindgren
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Tony Lindgren
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Tony Lindgren
• [PATCH 0/2] Fix few omap gpmc regressions when booted with device tree   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Fix oops for GPMC free   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Fix GPMC remap for devices using an offset   Tony Lindgren
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Tony Lindgren
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Tony Lindgren
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Tony Lindgren
• [PATCH 0/2] Fix few omap gpmc regressions when booted with device tree   Tony Lindgren
• [PATCH 11/11] pinctrl: single: Clear pin interrupts enabled by bootloader   Tony Lindgren
• [PATCH] ARM: dts: am437x-gp-evm: Boot fixes   Tony Lindgren
• [PATCH 0/2] Fix few omap gpmc regressions when booted with device tree   Tony Lindgren
• [PATCH RFC] ARM: dts: am335x: update USB DT references   Tony Lindgren
• [PATCH] ARM: dts: am437x-gp-evm: Boot fixes   Tony Lindgren
• [PATCH 0/2] Fix few omap gpmc regressions when booted with device tree   Tony Lindgren
• [PATCH 0/3] Fix LAN9220 caused memory corruption noticed on cm-t3730   Tony Lindgren
• [PATCH 1/3] ARM: dts: Fix bad OTG muxing for cm-t boards   Tony Lindgren
• [PATCH 2/3] ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree   Tony Lindgren
• [PATCH 3/3] ARM: dts: Fix GPMC timings for LAN9220   Tony Lindgren
• [GIT PULL] arm: omap: Immutable branch between MFD and ARM OMAP due for the v3.16 merge-window   Tony Lindgren
• [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode   Tony Lindgren
• [PATCH 07/11] ARM: dts: Enable N900 keybaord sleep leds by default   Tony Lindgren
• [GIT PULL] omap fixes against v3.15-rc1   Tony Lindgren
• [PATCH 2/2] of/irq: do irq resolution in platform_get_irq   Tony Lindgren
• [PATCH 0/2] DT irq deferred probe support   Tony Lindgren
• [PATCH 0/4] mfd: twl4030-power: Enable off-idle configuration when booted with device tree   Tony Lindgren
• [PATCH 1/4] mfd: twl4030-power: Add recommended idle configuration   Tony Lindgren
• [PATCH 2/4] mfd: twl4030-power: Add support for board specific configuration   Tony Lindgren
• [PATCH 3/4] mfd: twl4030power: Add a configuration to turn off oscillator during off-idle   Tony Lindgren
• [PATCH 4/4] ARM: dts: Enable twl4030 off-idle configuration for selected omaps   Tony Lindgren
• [PATCH 1a/4] mfd: twl4030-power: Add generic reset configuration   Tony Lindgren
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Tony Lindgren
• [PATCH v3] gpio: omap: implement get_direction   Tony Lindgren
• [PATCH 2/2] of/irq: do irq resolution in platform_get_irq   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Tony Lindgren
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Tony Lindgren
• [PATCH 06/23] ARM: OMAP: add OMAP5 DSI muxing   Tony Lindgren
• [PATCH v2] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Tony Lindgren
• [PATCH 1/1] ARM: dts: omap3-igep0020: use SMSC9221 timings   Tony Lindgren
• [PATCH] ARM: dts: am437x-gp-evm: Boot fixes   Tony Lindgren
• [PATCH] ARM: dts: am437x-gp-evm: Do not reset gpio5   Tony Lindgren
• [PATCH 0/3] Minor OMAP DTS fixes   Tony Lindgren
• [GIT PULL] somewhat urgent omap fixes against v3.15-rc1, fixes gpmc   Tony Lindgren
• [PATCHv3 19/41] OMAPDSS: panel-dpi: Add DT support   Tony Lindgren
• [PATCH 1/4] mfd: twl4030-power: Add recommended idle configuration   Tony Lindgren
• [PATCH 2/4] mfd: twl4030-power: Add support for board specific configuration   Tony Lindgren
• [PATCH 1a/4] mfd: twl4030-power: Add generic reset configuration   Tony Lindgren
• [PATCHv3 19/41] OMAPDSS: panel-dpi: Add DT support   Tony Lindgren
• [PATCH 06/23] ARM: OMAP: add OMAP5 DSI muxing   Tony Lindgren
• [PATCH 06/23] ARM: OMAP: add OMAP5 DSI muxing   Tony Lindgren
• [PATCH 06/23] ARM: OMAP: add OMAP5 DSI muxing   Tony Lindgren
• [PATCH 0/4] OMAPDSS: Add support for panel ls037v7dw01   Tony Lindgren
• [PATCH 1/4] OMAPDSS: Fix DSS clock multiplier issue on 3703 and probably 3630   Tony Lindgren
• [PATCH 2/4] OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod   Tony Lindgren
• [PATCH 3/4] OMAPDSS: panel-sharp-ls037v7dw01: add device tree support   Tony Lindgren
• [PATCH 4/4] ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp   Tony Lindgren
• [RFC 08/11] ARM: dts: am33xx: Add prcm_resets node   Tony Lindgren
• [PATCH 4/4] ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp   Tony Lindgren
• [PATCH 06/23] ARM: OMAP: add OMAP5 DSI muxing   Tony Lindgren
• [RFC 08/11] ARM: dts: am33xx: Add prcm_resets node   Tony Lindgren
• [RFC 08/11] ARM: dts: am33xx: Add prcm_resets node   Tony Lindgren
• [PATCH v3 00/10] arm64: UEFI support   Leif Lindholm
• [PATCH v3 01/10] lib: add fdt_empty_tree.c   Leif Lindholm
• [PATCH v3 02/10] doc: efi-stub.txt updates for ARM   Leif Lindholm
• [PATCH v3 03/10] efi: add helper function to get UEFI params from FDT   Leif Lindholm
• [PATCH v3 04/10] arm64: Add function to create identity mappings   Leif Lindholm
• [PATCH v3 05/10] efi: Add shared FDT related functions for ARM/ARM64   Leif Lindholm
• [PATCH v3 06/10] arm64: efi: add EFI stub   Leif Lindholm
• [PATCH v3 07/10] doc: arm64: add description of EFI stub support   Leif Lindholm
• [PATCH v3 08/10] arm64: add EFI runtime services   Leif Lindholm
• [PATCH v3 09/10] doc: arm: add UEFI support documentation   Leif Lindholm
• [PATCH v3 10/10] efi/arm64: ignore dtb= when UEFI SecureBoot is enabled   Leif Lindholm
• [PATCH 1/3] arm: dts: add device_type="memory" for ste-ccu8540   Leif Lindholm
• "magic" handling of memory nodes   Leif Lindholm
• "magic" handling of memory nodes   Leif Lindholm
• [PATCH v2 00/10] arm64: UEFI support   Leif Lindholm
• [PATCH v2 01/10] lib: add fdt_empty_tree.c   Leif Lindholm
• [PATCH v2 02/10] doc: efi-stub.txt updates for ARM   Leif Lindholm
• [PATCH v2 03/10] efi: add helper function to get UEFI params from FDT   Leif Lindholm
• [PATCH v2 04/10] arm64: Add function to create identity mappings   Leif Lindholm
• [PATCH v2 05/10] efi: Add shared FDT related functions for ARM/ARM64   Leif Lindholm
• [PATCH v2 06/10] arm64: add EFI runtime services   Leif Lindholm
• [PATCH v2 07/10] doc: arm: add UEFI support documentation   Leif Lindholm
• [PATCH v2 08/10] arm64: efi: add EFI stub   Leif Lindholm
• [PATCH v2 09/10] doc: arm64: add description of EFI stub support   Leif Lindholm
• [PATCH v2 10/10] efi/arm64: ignore dtb= when UEFI SecureBoot is enabled   Leif Lindholm
• [PATCH v2 00/10] arm64: UEFI support   Leif Lindholm
• Recent 3.x kernels: Memory leak causing OOMs   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• Recent 3.x kernels: Memory leak causing OOMs   Russell King - ARM Linux
• Recent 3.x kernels: Memory leak causing OOMs   Russell King - ARM Linux
• [PATCH 5/5] arm: Enable IRQs before attempting to read user space in __und_usr   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• [PATCH 73/75] ARM: l2c: move L2 cache register saving to a more sensible location   Russell King - ARM Linux
• [PATCH 73/75] ARM: l2c: move L2 cache register saving to a more sensible location   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb" (was Re: [GIT PULL] arm64 patches for 3.15)   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• [PATCH 1/2] ARM: hisi: enable L2 driver   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• FEC ethernet issues [Was: PL310 errata workarounds]   Russell King - ARM Linux
• [PATCH 0/3] ARM: implement workaround for Cortex-A9/PL310/PCIe deadlock   Russell King - ARM Linux
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Russell King - ARM Linux
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   Russell King - ARM Linux
• [PATCH 73/75] ARM: l2c: move L2 cache register saving to a more sensible location   Russell King - ARM Linux
• [PATCH 75/75] ARM: l2c: imx: remove direct write to power control register   Russell King - ARM Linux
• [PATCH 06/75] ARM: outer cache: add documentation of outer cache functions   Russell King - ARM Linux
• [PATCH 15/75] ARM: l2c: add and use L2C revision constants   Russell King - ARM Linux
• [PATCH 63/75] ARM: l2c: zynq: remove cache size override   Russell King - ARM Linux
• [PATCH 63/75] ARM: l2c: zynq: remove cache size override   Russell King - ARM Linux
• [PATCH 00/75] l2c series   Russell King - ARM Linux
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Russell King - ARM Linux
• The Alphabet (or, the sorting of Kconfig symbols)   Russell King - ARM Linux
• The Alphabet (or, the sorting of Kconfig symbols)   Russell King - ARM Linux
• New section mismatch warnings   Russell King - ARM Linux
• [PATCH 59/75] ARM: l2c: prima2: remove cache size override   Russell King - ARM Linux
• [PATCH] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)   Russell King - ARM Linux
• mach header files   Russell King - ARM Linux
• [PATCH 74/75] ARM: l2c: always enable low power modes   Russell King - ARM Linux
• [PATCH 00/75] l2c series   Russell King - ARM Linux
• [PATCH] ARM: Better virt_to_page() handling   Russell King - ARM Linux
• Help for doubt about why update SCTLR by cr_alignment every syscall,IRQ,exception ?   Russell King - ARM Linux
• L2 cache suspend/resume   Russell King - ARM Linux
• [PATCH] serial: amba-pl011: fix regression, causing an Oops on rmmod   Russell King - ARM Linux
• [PATCH v2 1/7] drm/exynos: add super device support   Russell King - ARM Linux
• [PATCH v2 1/7] drm/exynos: add super device support   Russell King - ARM Linux
• [PATCH v2 1/7] drm/exynos: add super device support   Russell King - ARM Linux
• [PATCH] ARM: i.MX6: update KSZ9031 phy fixup   Russell King - ARM Linux
• L2 cache suspend/resume   Russell King - ARM Linux
• leds-pwm - does anyone care for it?   Russell King - ARM Linux
• [PATCH 00/75] l2c series   Russell King - ARM Linux
• [PATCH] arm/twd: use smp_twd clock even with DT   Russell King - ARM Linux
• [PATCH v5 00/11] imx-drm dt bindings   Russell King - ARM Linux
• drivers/clk/bcm/clk-bcm281xx.c breaks on GCC 4.6.4 (and earlier)   Russell King - ARM Linux
• disabling MMU of ARMv7-A   Russell King - ARM Linux
• [PATCH 00/75] l2c series   Russell King - ARM Linux
• [PATCH] asm-generic: allow generic unaligned access if the arch supports it   Russell King - ARM Linux
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Russell King - ARM Linux
• [PATCH v12][ 03/12] imx-drm: Correct BGR666 and the board's dts that use them.   Russell King - ARM Linux
• ARM: SA1100: collie broken (and fixes pending)   Russell King - ARM Linux
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Russell King - ARM Linux
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Russell King - ARM Linux
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Russell King - ARM Linux
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Russell King - ARM Linux
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Russell King - ARM Linux
• [PATCH 0/8] Current imx-drm queue   Russell King - ARM Linux
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Russell King - ARM Linux
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Russell King - ARM Linux
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Russell King - ARM Linux
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Russell King - ARM Linux
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Russell King - ARM Linux
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Russell King - ARM Linux
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Russell King - ARM Linux
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Russell King - ARM Linux
• [PATCH v2] ARM: uprobes need icache flush after xol write   Russell King - ARM Linux
• [PATCH 1/2] pwm: add period and polarity to struct pwm_lookup   Russell King - ARM Linux
• [PATCH 3/5] arm: Disable preemption in iwmmxt_task_enable()   Russell King - ARM Linux
• [PATCH 4/5] arm: Disable preemption in crunch_task_enable()   Russell King - ARM Linux
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Russell King - ARM Linux
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Russell King - ARM Linux
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Russell King - ARM Linux
• Versatile express lockdep warning on poweroff   Russell King - ARM Linux
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Russell King - ARM Linux
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Russell King - ARM Linux
• commit b3a977b224 {ARM: Better virt_to_page() handling} breaks Keystone boot   Russell King - ARM Linux
• commit b3a977b224 {ARM: Better virt_to_page() handling} breaks Keystone boot   Russell King - ARM Linux
• Help for doubt about why update SCTLR by cr_alignment every syscall,IRQ,exception ?   Russell King - ARM Linux
• [PATCH] ARM: imx: propagate DI clock changes up the clock tree to PLL5   Russell King - ARM Linux
• [PATCH 1/2] ARM: add cpu_is_pj4() to distinguish PJ4 core   Russell King - ARM Linux
• [PATCH] arm: allow all architectures to change max zone order   Russell King - ARM Linux
• [PATCH 2/2] ARM: i.MX6: ipu_di_sel clocks can set parent rates   Russell King - ARM Linux
• [PATCH] ARM: prima2: remove L2 cache size override   Russell King - ARM Linux
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Russell King - ARM Linux
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Russell King - ARM Linux
• [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures   Russell King - ARM Linux
• [RFC] ARM: dts: imx27-pdk: Add PMIC support   Russell King - ARM Linux
• [PATCH] ARM: prima2: remove L2 cache size override   Russell King - ARM Linux
• [PATCH] ARM: dts: imx27-pdk: Add PMIC support   Russell King - ARM Linux
• [PATCH] ARM: prima2: remove L2 cache size override   Russell King - ARM Linux
• [PATCH 0/5] imx ahci DT updates + cubox-i eSATA support   Russell King - ARM Linux
• [PATCH] ARM: prima2: remove L2 cache size override   Russell King - ARM Linux
• [PATCH] ARM: prima2: remove L2 cache size override   Russell King - ARM Linux
• [PATCH] ARM: prima2: remove L2 cache size override   Russell King - ARM Linux
• [PATCH v7 2/2] ARM hibernation / suspend-to-disk   Russell King - ARM Linux
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Russell King - ARM Linux
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   Russell King - ARM Linux
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Russell King - ARM Linux
• Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• kmalloc and uncached memory   Russell King - ARM Linux
• [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum   Russell King - ARM Linux
• [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum   Russell King - ARM Linux
• [PATCH RFC 2/5] ata: ahci_imx: avoid reprobing ahci_imx driver when using DT   Russell King - ARM Linux
• [patch 0/6] dma: edma: Provide granular residue accounting   Russell King - ARM Linux
• Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• [patch 0/6] dma: edma: Provide granular residue accounting   Russell King - ARM Linux
• Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Russell King - ARM Linux
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Russell King - ARM Linux
• [PATCH 07/10] ARM: bcm: tidy up a few includes   Russell King - ARM Linux
• Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Russell King - ARM Linux
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Russell King - ARM Linux
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Russell King - ARM Linux
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Russell King - ARM Linux
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Russell King - ARM Linux
• [PATCH v2 5/7] ARM: dma: Use dma_pfn_offset for dma address translation   Russell King - ARM Linux
• Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Russell King - ARM Linux
• [Qemu-devel] Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• [Qemu-devel] Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• [Qemu-devel] Change of TEXT_OFFSET for multi_v7_defconfig   Russell King - ARM Linux
• [PATCH v3 0/2] change ARM linux memory layout to support 32 CPUs   Russell King - ARM Linux
• [PATCH 2/5] ARM: dts: Device tree for AXM55xx.   Russell King - ARM Linux
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Russell King - ARM Linux
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Russell King - ARM Linux
• [PATCH] ARM: Fix double definition of virt_to_pfn()   Russell King - ARM Linux
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Russell King - ARM Linux
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Russell King - ARM Linux
• [PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed   Russell King - ARM Linux
• [PATCH v3 0/3] ARM: OMAP2+: AM437x: L2 cache support   Russell King - ARM Linux
• [PATCH] ARM: prima2: remove L2 cache size override   Russell King - ARM Linux
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Russell King - ARM Linux
• Versatile express lockdep warning on poweroff   Russell King - ARM Linux
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Russell King - ARM Linux
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Russell King - ARM Linux
• [PATCH] ARM: prima2: remove L2 cache size override   Russell King - ARM Linux
• [PATCH 01/38] mmc: sdio_irq: rework sdio irq handling   Russell King - ARM Linux
• [PATCH 1/5] ARM: Add platform support for LSI AXM55xx SoC   Russell King - ARM Linux
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Russell King - ARM Linux
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
• set_fiq_handler: Bad mode in data abort handler detected   Russell King - ARM Linux
• [PATCH 2/4] ARM: S3C24XX: trim down debug uart handling   Russell King - ARM Linux
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Russell King - ARM Linux
• [PATCH v2 1/6] ARM: Add platform support for LSI AXM55xx SoC   Russell King - ARM Linux
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
• [PATCH V2 0/5] Huge pages for short descriptors on ARM   Russell King - ARM Linux
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Russell King - ARM Linux
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Russell King - ARM Linux
• [PATCH 27/38] mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks   Russell King - ARM Linux
• [PATCH 27/38] mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks   Russell King - ARM Linux
• [PATCH v2 0/7] ARM: berlin: add pinctrl support   Russell King - ARM Linux
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Russell King - ARM Linux
• L2C boot crash on BCM Capri   Russell King - ARM Linux
• L2C boot crash on BCM Capri   Russell King - ARM Linux
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Russell King - ARM Linux
• set_fiq_handler: Bad mode in data abort handler detected   Russell King - ARM Linux
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Russell King - ARM Linux
• [PATCH 35/38] mmc: dw_mmc: call mmc_of_parse to fill in common options   Russell King - ARM Linux
• [PATCH] imx-drm: fix hdmi hotplug detection initial state   Russell King - ARM Linux
• [PATCH] imx-drm: fix hdmi hotplug detection initial state   Russell King - ARM Linux
• do_undefinstr call sem down_read?   Russell King - ARM Linux
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
• [PATCH 00/38] MMC updates, plus CuBox-i WiFi support   Russell King - ARM Linux
• [PATCH 000/222] The *Full* Cubox-i series   Russell King - ARM Linux
• [PATCH v2 3/6] ARM: dts: Device tree for AXM55xx.   Russell King - ARM Linux
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King - ARM Linux
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King - ARM Linux
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King - ARM Linux
• set_fiq_handler: Bad mode in data abort handler detected   Russell King - ARM Linux
• [PATCH 000/222] The *Full* Cubox-i series   Russell King - ARM Linux
• [PATCH v2 02/18] usb: host: xhci-plat: Add clocks support   Russell King - ARM Linux
• [PATCH 000/222] The *Full* Cubox-i series   Russell King - ARM Linux
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King - ARM Linux
• [PATCHv4 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7   Russell King - ARM Linux
• [PATCH v2] staging: imx-drm-core: skip components whose parent device is disabled   Russell King - ARM Linux
• [PATCH RFC 3/3] drm/exynos: use pending_components for components tracking   Russell King - ARM Linux
• [RFC PATCH 0/8] component helper improvements   Russell King - ARM Linux
• randconfig failures - MMC + trusted foundations   Russell King - ARM Linux
• randconfig failures - MMC + trusted foundations   Russell King - ARM Linux
• [PATCH RFC 0/5] Dove PMU support   Russell King - ARM Linux
• [RFC PATCH 0/8] component helper improvements   Russell King - ARM Linux
• [PATCH] clkdev: only fall through to clk_get_sys() if DT indicates no entry   Russell King - ARM Linux
• randconfig failures - MMC + trusted foundations   Russell King - ARM Linux
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Russell King - ARM Linux
• [PATCH RFC 6/8] component: remove old add_components method   Russell King - ARM Linux
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King - ARM Linux
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King - ARM Linux
• [PATCH 3/5] ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets   Russell King - ARM Linux
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Russell King - ARM Linux
• [PATCH 00/16] Another 16 L2C patches   Russell King - ARM Linux
• [PATCH 00/16] Another 16 L2C patches   Russell King - ARM Linux
• [PATCH 07/16] ARM: l2c: convert tegra to generic l2c initialisation   Russell King - ARM Linux
• [PATCH 00/16] Another 16 L2C patches   Russell King - ARM Linux
• [PATCH 08/16] ARM: l2c: convert prima2 to generic l2c initialisation   Russell King - ARM Linux
• [PATCH 02/16] ARM: l2c: add platform independent core L2 cache initialisation   Russell King - ARM Linux
• [PATCH 071/222] net:fec: remove unnecessary ip stack includes   Russell King - ARM Linux
• [PATCH 00/16] Another 16 L2C patches   Russell King - ARM Linux
• [PATCH 02/16] ARM: l2c: add platform independent core L2 cache initialisation   Russell King - ARM Linux
• [PATCH 00/98] Full L2C patch series   Russell King - ARM Linux
• [PATCH 71/97] ARM: l2c: convert tegra to generic l2c initialisation   Russell King - ARM Linux
• [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP   Russell King - ARM Linux
• [PATCH 00/98] Full L2C patch series   Russell King - ARM Linux
• [PATCH 93/97] ARM: l2c: convert mvebu to generic l2c initialisation   Russell King - ARM Linux
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Russell King - ARM Linux
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Russell King - ARM Linux
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Russell King - ARM Linux
• [PATCH net-next 5/7] net:fec: add support for dumping transmit ring on timeout   Russell King - ARM Linux
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Russell King - ARM Linux
• [RFC PATCH 0/4] drivers/base: Generic framework for tracking internal interfaces   Russell King - ARM Linux
• Perf top always show 0.00   Jason Liu
• Perf top always show 0.00   Jason Liu
• L2 cache suspend/resume   Joseph Lo
• [PATCH 70/97] ARM: l2c: tegra: convert to common l2c310 early resume functionality   Joseph Lo
• [RFC PATCH] ARM: uprobes need icache flush after xol write   David Long
• [RFC PATCH] ARM: uprobes need icache flush after xol write   David Long
• [PATCH v2] ARM: uprobes need icache flush after xol write   David Long
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Long
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Long
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Long
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Long
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   David Long
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   David Long
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   David Long
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   David Long
• [PATCH v5] ARM: uprobes need icache flush after xol write   David Long
• dma_alloc_coherent and cache?   Valentin Longchamp
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Mike Looijmans
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Yinghai Lu
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Yinghai Lu
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Yinghai Lu
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Yinghai Lu
• [PATCH v2 3/7] tty/serial: convert 8250 to generic earlycon   Yinghai Lu
• [PATCH 1/2] ARM: mvebu: enable the SDHCI interface on Armada 385   Andrew Lunn
• [PATCH 1/2] ARM: mvebu: enable the SDHCI interface on Armada 385   Andrew Lunn
• [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces   Andrew Lunn
• [PATCH 1/5] DT: Vendor: Add prefixes used by Kirkwood devices   Andrew Lunn
• [PATCH 3/3] ARM: kirkwood: rename kirwood-nsa310-common to 3x0-common   Andrew Lunn
• [PATCH 0/3] ARM: kirkwood: Add device tree for NSA320   Andrew Lunn
• [PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts   Andrew Lunn
• [PATCH RESEND 4/5] Documentation: add the Marvell Berlin pinctrl documentation   Andrew Lunn
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Andrew Lunn
• [PATCH 21/29] ARM: orion5x: use DT to describe I2C devices on edmini_v2   Andrew Lunn
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Andrew Lunn
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Andrew Lunn
• [PATCH 21/29] ARM: orion5x: use DT to describe I2C devices on edmini_v2   Andrew Lunn
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Andrew Lunn
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Andrew Lunn
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Andrew Lunn
• [PATCH v2 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles   Andrew Lunn
• [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x   Andrew Lunn
• [PATCH v2 0/3] ARM: mvebu: enable SDHCI interface on Armada 38x   Andrew Lunn
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Andrew Lunn
• dma_alloc_coherent and cache?   Andrew Lunn
• [PATCH] ARM: Kirkwood: T5325: Fix double probe of Codec   Andrew Lunn
• dma_alloc_coherent and cache?   Andrew Lunn
• [PATCH 3/4] ARM: dts: berlin: add the SDHCI nodes for the BG2Q   Andrew Lunn
• [PATCH 5/6] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Andrew Lunn
• [PATCH 5/6] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Andrew Lunn
• [PATCH 0/5] Simple-audio-card support for HP t5325   Andrew Lunn
• [PATCH 1/5] ASoC: alc5623: Add device tree binding   Andrew Lunn
• [PATCH 2/5] ARM: Kirkwood: Use DT to instansiate codec   Andrew Lunn
• [PATCH 3/5] ARM: Kirkwood: DT: Add missing #sound-dai-cells property   Andrew Lunn
• [PATCH 4/5] ASoC: simple-card: Support setting mclk via a fixed factor   Andrew Lunn
• [PATCH 5/5] ARM: Kirkwood: t5325: Use simple-card to instantiate audio   Andrew Lunn
• [PATCH 0/4] Add a DT description of LaCie 2Big and 5Big Network v2   Andrew Lunn
• [PATCH 1/4] ARM: Kirkwood: Add board file for netxbig LEDs   Andrew Lunn
• [PATCH 2/4] ARM: Kirkwood: Add DT descriptions for net2big and net5big.   Andrew Lunn
• [PATCH 3/4] ARM: MVEBU: Add LaCie 2Big and 5Big Network v2   Andrew Lunn
• [PATCH 4/4] ARM: MULTI_V5: Enable LaCie 2Big and 5Big Network v2   Andrew Lunn
• [PATCH 1/4] ARM: Kirkwood: Add board file for netxbig LEDs   Andrew Lunn
• [PATCH 1/5] ASoC: alc5623: Add device tree binding   Andrew Lunn
• [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs   Andrew Lunn
• [PATCH 1/3] ARM: mvebu: clean-up unneeded kconfig selects   Andrew Lunn
• [PATCH v2 02/18] usb: host: xhci-plat: Add clocks support   Andrew Lunn
• [PATCH v2 05/18] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x   Andrew Lunn
• [PATCH v2 14/18] ARM: mvebu: Add support for USB cluster on the Armada 375 SoC   Andrew Lunn
• [PATCH v2 14/18] ARM: mvebu: Add support for USB cluster on the Armada 375 SoC   Andrew Lunn
• [PATCH RFC 0/5] Dove PMU support   Andrew Lunn
• [PATCH] ARM: mvebu: refine which files are build in mach-mvebu   Andrew Lunn
• [PATCH 03/15] ARM: dts: kirkwood: add stdout-path property to all boards   Andrew Lunn
• [PATCH 07/15] ARM: dts: kirkwood: consolidate common pinctrl settings   Andrew Lunn
• [PATCH 00/15] Kirkwood DT fix and cleanup round 1   Andrew Lunn
• [PATCH 03/15] ARM: dts: kirkwood: add stdout-path property to all boards   Andrew Lunn
• [PATCH v5] ARM: vDSO gettimeofday using generic timer architecture   Nathan Lynch
• Perf top always show 0.00   Nathan Lynch
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Nathan Lynch
• [PATCH v6 1/6] ARM: place sigpage at a random offset above stack   Nathan Lynch
• [PATCH v6 2/6] ARM: allow user access to arch timer virtual counter   Nathan Lynch
• [PATCH v6 3/6] ARM: miscellaneous vdso infrastructure, preparation   Nathan Lynch
• [PATCH v6 4/6] ARM: add vdso user-space code   Nathan Lynch
• [PATCH v6 5/6] ARM: vdso initialization, mapping, and synchronization   Nathan Lynch
• [PATCH v6 6/6] ARM: add CONFIG_VDSO Kconfig and Makefile bits   Nathan Lynch
• [PATCH v6 2/6] ARM: allow user access to arch timer virtual counter   Nathan Lynch
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Nathan Lynch
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Nathan Lynch
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Nathan Lynch
• [PATCH v6 0/6] ARM: vdso gettimeofday using generic timer architecture   Nathan Lynch
• [PATCH] watchdog: sunxi: Fix compilation with C=2   Emilio López
• [PATCH] watchdog: sunxi: Fix compilation with C=2   Emilio López
• [PATCH 07/15] ARM: sunxi: dt: define A31's APB0 clk gates node   Emilio López
• [PATCH v8 00/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Emilio López
• [PATCH 5/7] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support   Emilio López
• [PATCH] sunxi: make gate clock getable by name   Emilio López
• [PATCH v2 4/6] ARM: socfpga: dts: add can0+1   Pavel Machek
• [PATCH v2 5/6] ARM: socfpga: dts: add support for EBV SOCrates   Pavel Machek
• [PATCH] dt-bindings: add vendor-prefix for Newhaven Display   Pavel Machek
• [PATCH] Route keyboard LEDs through the generic LEDs layer.   Pavel Machek
• socfpga in 3.15-rc2   Pavel Machek
• [PATCH] clk: socfpga: fix clock driver for 3.15   Pavel Machek
• socfpga in 3.15-rc2   Pavel Machek
• can problems on socfpga [was Re: [PATCH v2 4/6] ARM: socfpga: dts: add can0+1]   Pavel Machek
• can problems on socfpga [was Re: [PATCH v2 4/6] ARM: socfpga: dts: add can0+1]   Pavel Machek
• can problems on socfpga [was Re: [PATCH v2 4/6] ARM: socfpga: dts: add can0+1]   Pavel Machek
• can problems on socfpga [was Re: [PATCH v2 4/6] ARM: socfpga: dts: add can0+1]   Pavel Machek
• can problems on socfpga [was Re: [PATCH v2 4/6] ARM: socfpga: dts: add can0+1]   Pavel Machek
• [patch] Fix CAN on socfpga, for net/master   Pavel Machek
• [patch] Fix CAN on socfpga, for net/master   Pavel Machek
• [PATCH] Xen: hibernation is x86-only at the moment   Pavel Machek
• [patch] Fix CAN on socfpga, for net/master   Pavel Machek
• Porting plat-pxa to the MMP PDMA driver   Daniel Mack
• Porting plat-pxa to the MMP PDMA driver   Daniel Mack
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts)   Daniel Mack
• [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts)   Daniel Mack
• [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts)   Daniel Mack
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Lukasz Majewski
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Lukasz Majewski
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Lukasz Majewski
• [RFC] ARM64: 4 level page table translation for 4KB pages   Catalin Marinas
• [RFC] ARM64: 4 level page table translation for 4KB pages   Catalin Marinas
• [RFC] ARM64: 4 level page table translation for 4KB pages   Catalin Marinas
• [PATCH 0/5] arm: Early IRQ enabling in the Undef user handler   Catalin Marinas
• Recent 3.x kernels: Memory leak causing OOMs   Catalin Marinas
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb" (was Re: [GIT PULL] arm64 patches for 3.15)   Catalin Marinas
• [RFC] ARM64: 4 level page table translation for 4KB pages   Catalin Marinas
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb" (was Re: [GIT PULL] arm64 patches for 3.15)   Catalin Marinas
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb" (was Re: [GIT PULL] arm64 patches for 3.15)   Catalin Marinas
• Bug(?) in patch "arm64: Implement coherent DMA API based on swiotlb"   Catalin Marinas
• [PATCH 1/1] AArch64: TCR_TG1_64K incorrectly sets TCR_EL1 bits [31:30]   Catalin Marinas
• [RFC] ARM64: 4 level page table translation for 4KB pages   Catalin Marinas
• [PATCH 1/1] AArch64: TCR_TG1_64K incorrectly sets TCR_EL1 bits [31:30]   Catalin Marinas
• [RFC] ARM64: 4 level page table translation for 4KB pages   Catalin Marinas
• [PATCH] arm64: Fix duplicated Kconfig entries again   Catalin Marinas
• [PATCH 1/1] AArch64: TCR_TG1_64K incorrectly sets TCR_EL1 bits [31:30]   Catalin Marinas
• [RFC] ARM64: 4 level page table translation for 4KB pages   Catalin Marinas
• [PATCH] arm64: Relax the kernel cache requirements for boot   Catalin Marinas
• [PATCH 5/5] arm: Enable IRQs before attempting to read user space in __und_usr   Catalin Marinas
• [PATCH 0/3] arm64: Provide ESR_EL1 information to user signal handlers   Catalin Marinas
• [PATCH 1/3] arm64: Provide read/write fault information in compat signal handlers   Catalin Marinas
• [PATCH 2/3] arm64: Remove the aux_context structure   Catalin Marinas
• [PATCH 3/3] arm64: Expose ESR_EL1 information to user when SIGSEGV/SIGBUS   Catalin Marinas
• [PATCH] arm64: fix !CONFIG_COMPAT build failures   Catalin Marinas
• [PATCH 1/3] arm64: Provide read/write fault information in compat signal handlers   Catalin Marinas
• [PATCH 0/3] ARM: implement workaround for Cortex-A9/PL310/PCIe deadlock   Catalin Marinas
• [PATCH] arm64: Add missing Kconfig for CONFIG_STRICT_DEVMEM   Catalin Marinas
• [PATCH arm64 bootwrapper] Fix maintainer-clean make target   Catalin Marinas
• [PATCH] ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig"   Catalin Marinas
• [PATCH] arm64: Remove boot thread synchronisation for spin-table release method   Catalin Marinas
• memcpy alignment for DEVICE_nGnRnE   Catalin Marinas
• [PATCH 2/3] ARM: mm: add support for HW coherent systems in PL310   Catalin Marinas
• [GIT PULL] arm64 patches for 3.15   Catalin Marinas
• memcpy alignment for DEVICE_nGnRnE   Catalin Marinas
• [PATCH] arm64: Add user_debug command line option   Catalin Marinas
• [PATCH 2/3] ARM: mm: add support for HW coherent systems in PL310   Catalin Marinas
• [PATCH 2/3] ARM: mm: add support for HW coherent systems in PL310   Catalin Marinas
• arm64: default dma_ops is set to coherent_dma_ops results into DMA FAILURE   Catalin Marinas
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Catalin Marinas
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Catalin Marinas
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Catalin Marinas
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Catalin Marinas
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Catalin Marinas
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Catalin Marinas
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Catalin Marinas
• [PATCH 6/8] tty/serial: pl011: add generic earlycon support   Catalin Marinas
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Catalin Marinas
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Catalin Marinas
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Catalin Marinas
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Catalin Marinas
• arm64: default dma_ops is set to coherent_dma_ops results into DMA FAILURE   Catalin Marinas
• [PATCH 0/3] arm64: Default to non-coherent DMA ops   Catalin Marinas
• [PATCH 1/3] arm64: Make default dma_ops to be noncoherent   Catalin Marinas
• [PATCH 2/3] arm64: Use bus notifiers to set per-device coherent DMA ops   Catalin Marinas
• [PATCH 3/3] arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent   Catalin Marinas
• [PATCH 0/3] arm64: Default to non-coherent DMA ops   Catalin Marinas
• [GIT PULL] arm64 fixes for 3.15   Catalin Marinas
• [RESUBMIT RFC PATCH v2 3/3] drivers: mfd: Add support for Exynos PMU driver   Catalin Marinas
• [PATCH] arm64: fixmap: fix missing sub-page offset for earlyprintk   Catalin Marinas
• [PATCH 1/3] arm64: adjust el0_sync so that a function can be called   Catalin Marinas
• [PATCH 3/3] arm64: enable context tracking   Catalin Marinas
• [PATCH v2 00/10] arm64: UEFI support   Catalin Marinas
• [PATCH v2 0/7] Generic serial earlycon   Catalin Marinas
• [PATCH v2 00/10] arm64: UEFI support   Catalin Marinas
• [PATCH] Fix for the arm64 kern_addr_valid() function   Catalin Marinas
• [PATCH v4 2/7] arm64: Decouple page size from level of translation tables   Catalin Marinas
• [PATCH v4 3/7] arm64: Introduce a kernel configuration option for VA_BITS   Catalin Marinas
• [PATCH v4 4/7] arm64: Add a description on 48-bit address space with 4KB pages   Catalin Marinas
• [PATCH v2 00/10] arm64: UEFI support   Catalin Marinas
• [PATCH v4 6/7] arm64: mm: Implement 4 levels of translation tables   Catalin Marinas
• [PATCH v4 4/7] arm64: Add a description on 48-bit address space with 4KB pages   Catalin Marinas
• [RFC PATCH V4 6/7] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic   Catalin Marinas
• [RFC PATCH V4 6/7] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic   Catalin Marinas
• ARMv8: Allowing user space to perform cache-maintenance   Catalin Marinas
• [RFC PATCH V4 6/7] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic   Catalin Marinas
• disabling MMU of ARMv7-A   Dave Martin
• disabling MMU of ARMv7-A   Dave Martin
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Dave Martin
• [PATCH] ARM: VFP: Fix emulation of multiply accumulate instructions   Dave Martin
• [PATCH v2 06/12] ARM: mcpm: change max clusters to 4   Dave Martin
• [PATCH v2 08/12] ARM: dts: add hip04-d01 dts file   Dave Martin
• [PATCH v2 07/12] ARM: hisi: add hip04 SoC support   Dave Martin
• [PATCH v2 06/12] ARM: mcpm: change max clusters to 4   Dave Martin
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Dave Martin
• [PATCH] ARM: fix do_div() bug in big-endian systems   Dave Martin
• [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM   Dave Martin
• [PATCH 3/5] ARM: EXYNOS5420: Add IO mapping for non-secure SYSRAM   Dave Martin
• [PATCH v2 06/12] ARM: mcpm: change max clusters to 4   Dave Martin
• [PATCH] ARM: fix do_div() bug in big-endian systems   Dave Martin
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Dave Martin
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Dave Martin
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Dave Martin
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Dave Martin
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Dave Martin
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Dave Martin
• [PATCH v4 06/14] ARM: mcpm: support 4 clusters   Dave Martin
• [PATCH v4 09/14] ARM: dts: add hip04-d01 dts file   Dave Martin
• [PATCH v4 08/14] ARM: hisi: add hip04 SoC support   Dave Martin
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Dave Martin
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Dave Martin
• [PATCH v2 3/3] arm: exynos: Add /dev/bL_status user interface on Exynos5420   Dave Martin
• [PATCH] ARM: OMAP5: Redo THUMB mode switch on secondary CPU   Dave Martin
• [PATCH v3 5/6] arm: exynos: Add MCPM call-back functions   Dave Martin
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Dave Martin
• [PATCH] mcpm: Rename the power_down_finish() functions to be less confusing   Dave P Martin
• [PATCH 1/4] ARM: dts: am335x-bone-common: use phandles for USB and DMA refs   Guido Martínez
• [PATCH 2/4] ARM: dts: am335x-evm: use phandles for USB and DMA refs   Guido Martínez
• [PATCH 3/4] ARM: dts: am335x-evmsk: use phandles for USB and DMA refs   Guido Martínez
• [PATCH 4/4] ARM: dts: am335x-igep0033: use phandles for USB and DMA refs   Guido Martínez
• [PATCH 1/4] ARM: dts: am335x-bone-common: use phandles for USB and DMA refs   Guido Martínez
• [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Peter Maydell
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Peter Maydell
• [PATCH v9 05/12] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Peter Maydell
• Change of TEXT_OFFSET for multi_v7_defconfig   Peter Maydell
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Peter Maydell
• [Qemu-devel] [PATCH] QEMU: ARM: boot: Load kernel at an Image friendly address   Peter Maydell
• Change of TEXT_OFFSET for multi_v7_defconfig   Peter Maydell
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Stanislav Meduna
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Stanislav Meduna
• BUG: spinlock trylock failure on UP - reverting timer patches helps   Stanislav Meduna
• BUG: spinlock trylock failure on UP - reverting timer patches helps   Stanislav Meduna
• BUG: spinlock trylock failure on UP - reverting timer patches helps   Stanislav Meduna
• OMAP baseline test results for v3.14-rc4 (SDP2430 fail to boot - mmc fs)   Nishanth Menon
• [PATCH 00/15] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Nishanth Menon
• [PATCH 01/15] bus: omap_l3_noc: Fix copyright information   Nishanth Menon
• [PATCH 02/15] bus: omap_l3_noc: switched over to relaxed variants of readl/writel   Nishanth Menon
• [PATCH 02/15] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Nishanth Menon
• [PATCH 03/15] bus: omap_l3_noc: un-obfuscate l3_targ address computation   Nishanth Menon
• [PATCH 04/15] bus: omap_l3_noc: move L3 master data structure out   Nishanth Menon
• [PATCH 05/15] bus: omap_l3_noc: convert target information into a structure   Nishanth Menon
• [PATCH 06/15] bus: omap_l3_noc: make error reporting and handling common.   Nishanth Menon
• [PATCH 07/15] bus: omap_l3_noc: populate l3->dev and use it   Nishanth Menon
• [PATCH 08/15] bus: omap_l3_noc: Add support for discountinous flag mux input numbers   Nishanth Menon
• [PATCH 09/15] bus: omap_l3_noc: rename functions and data to omap_l3   Nishanth Menon
• [PATCH 10/15] bus: omap_l3_noc: remove iclk from omap_l3 struct   Nishanth Menon
• [PATCH 11/15] bus: omap_l3_noc: use of_match_data to pick up SoC information   Nishanth Menon
• [PATCH 12/15] bus: omap_l3_noc: convert flagmux information into a structure   Nishanth Menon
• [PATCH 13/15] bus: omap_l3_noc: introduce concept of submodule   Nishanth Menon
• [PATCH 14/15] bus: omap_l3_noc: Add DRA7 interconnect error data   Nishanth Menon
• [PATCH 15/15] bus: omap_l3_noc: Add AM4372 interconnect error data   Nishanth Menon
• [PATCH 02/15] bus: omap_l3_noc: switched over to relaxed variants of readl/writel   Nishanth Menon
• [PATCH 0/2] ARM: dts: DRA7/AM4372: add l3_noc information   Nishanth Menon
• [PATCH 1/2] ARM: dts: DRA7: Use dra7-l3-noc instead of omap4-l3-noc   Nishanth Menon
• [PATCH 2/2] ARM: dts: AM4372: add l3-noc information   Nishanth Menon
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Nishanth Menon
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Nishanth Menon
• [PATCH V2 01/19] bus: omap_l3_noc: Fix copyright information   Nishanth Menon
• [PATCH V2 02/19] bus: omap_l3_noc: rename functions and data to omap_l3   Nishanth Menon
• [PATCH V2 03/19] bus: omap_l3_noc: remove iclk from omap_l3 struct   Nishanth Menon
• [PATCH V2 04/19] bus: omap_l3_noc: populate l3->dev and use it   Nishanth Menon
• [PATCH V2 05/19] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Nishanth Menon
• [PATCH V2 06/19] bus: omap_l3_noc: un-obfuscate l3_targ address computation   Nishanth Menon
• [PATCH V2 07/19] bus: omap_l3_noc: move L3 master data structure out   Nishanth Menon
• [PATCH V2 08/19] bus: omap_l3_noc: convert target information into a structure   Nishanth Menon
• [PATCH V2 09/19] bus: omap_l3_noc: Add support for discountinous flag mux input numbers   Nishanth Menon
• [PATCH V2 10/19] bus: omap_l3_noc: use of_match_data to pick up SoC information   Nishanth Menon
• [PATCH V2 11/19] bus: omap_l3_noc: convert flagmux information into a structure   Nishanth Menon
• [PATCH V2 12/19] bus: omap_l3_noc: fix masterid detection   Nishanth Menon
• [PATCH V2 13/19] bus: omap_l3_noc: make error reporting and handling common   Nishanth Menon
• [PATCH V2 14/19] bus: omap_l3_noc: improve readability by using helper for slave event parsing   Nishanth Menon
• [PATCH V2 15/19] bus: omap_l3_noc: add information about the type of operation   Nishanth Menon
• [PATCH V2 16/19] bus: omap_l3_noc: Add information about the context of operation   Nishanth Menon
• [PATCH V2 17/19] bus: omap_l3_noc: introduce concept of submodule   Nishanth Menon
• [PATCH V2 18/19] bus: omap_l3_noc: Add DRA7 interconnect error data   Nishanth Menon
• [PATCH V2 19/19] bus: omap_l3_noc: Add AM4372 interconnect error data   Nishanth Menon
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Nishanth Menon
• [PATCH V2 06/19] bus: omap_l3_noc: un-obfuscate l3_targ address computation   Nishanth Menon
• [PATCH V2 05/19] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Nishanth Menon
• [PATCH V2 05/19] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Nishanth Menon
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Nishanth Menon
• [PATCH] ARM: dts: am437x-gp-evm: Add vtt_fixed regulator   Nishanth Menon
• [RESEND PATCH] regulator: core: Disable unused regulators after deferred probing is done   Nishanth Menon
• [RESEND PATCH] regulator: core: Disable unused regulators after deferred probing is done   Nishanth Menon
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Nishanth Menon
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Nishanth Menon
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Nishanth Menon
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Nishanth Menon
• [PATCH] power: twl4030_charger: clear IRQs after handling them   Nishanth Menon
• [PATCH V3 00/20] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Nishanth Menon
• [PATCH V3 01/20] bus: omap_l3_noc: Fix copyright information   Nishanth Menon
• [PATCH V3 02/20] bus: omap_l3_noc: rename functions and data to omap_l3   Nishanth Menon
• [PATCH V3 03/20] bus: omap_l3_noc: remove iclk from omap_l3 struct   Nishanth Menon
• [PATCH V3 04/20] bus: omap_l3_noc: populate l3->dev and use it   Nishanth Menon
• [PATCH V3 05/20] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Nishanth Menon
• [PATCH V3 06/20] bus: omap_l3_noc: un-obfuscate l3_targ address computation   Nishanth Menon
• [PATCH V3 07/20] bus: omap_l3_noc: move L3 master data structure out   Nishanth Menon
• [PATCH V3 08/20] bus: omap_l3_noc: convert target information into a structure   Nishanth Menon
• [PATCH V3 09/20] bus: omap_l3_noc: Add support for discountinous flag mux input numbers   Nishanth Menon
• [PATCH V3 10/20] bus: omap_l3_noc: use of_match_data to pick up SoC information   Nishanth Menon
• [PATCH V3 11/20] bus: omap_l3_noc: convert flagmux information into a structure   Nishanth Menon
• [PATCH V3 12/20] bus: omap_l3_noc: fix masterid detection   Nishanth Menon
• [PATCH V3 13/20] bus: omap_l3_noc: make error reporting and handling common   Nishanth Menon
• [PATCH V3 14/20] bus: omap_l3_noc: improve readability by using helper for slave event parsing   Nishanth Menon
• [PATCH V3 15/20] bus: omap_l3_noc: ignore masked out unclearable targets   Nishanth Menon
• [PATCH V3 16/20] bus: omap_l3_noc: add information about the type of operation   Nishanth Menon
• [PATCH V3 17/20] bus: omap_l3_noc: Add information about the context of operation   Nishanth Menon
• [PATCH V3 18/20] bus: omap_l3_noc: introduce concept of submodule   Nishanth Menon
• [PATCH V3 19/20] bus: omap_l3_noc: Add DRA7 interconnect error data   Nishanth Menon
• [PATCH V3 20/20] bus: omap_l3_noc: Add AM4372 interconnect error data   Nishanth Menon
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Nishanth Menon
• [PATCH v2] ARM: dts: disable MDMA1 node for Exynos5420   Javi Merino
• [PATCH] ARM: dts: Remove vmmc-supply for mmc at 12220000 on arndale-octa board   Javi Merino
• [PATCH] ARM: dts: Remove vmmc-supply for mmc at 12220000 on arndale-octa board   Javi Merino
• [PATCH] ARM: dts: Remove vmmc-supply for mmc at 12220000 on arndale-octa board   Javi Merino
• [PATCH] ARM: dts: Remove vmmc-supply for mmc at 12220000 on arndale-octa board   Javi Merino
• [RFC 3/3] asm-generic: Drop renameat syscall from default list   Szeredi Miklos
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   David Miller
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   David Miller
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   David Miller
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   David Miller
• [PATCH 2/3] net: hisilicon: new hip04 MDIO driver   David Miller
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   David Miller
• [PATCH 3/3] net: hisilicon: new hip04 ethernet driver   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [PATCH v2 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.   David Miller
• [PATCH] Revert "net: mvneta: fix usage as a module on RGMII configurations"   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   David Miller
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   David Miller
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   David Miller
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   David Miller
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   David Miller
• [PATCH 0/3] net: mvneta: fix usage as a module, and support QSGMII properly   David Miller
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   David Miller
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   David Miller
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   David Miller
• [PATCH 2/2] net: Add Keystone NetCP ethernet driver   David Miller
• [PATCH] arm64:init: Move of_clk_init to time_init   Chanho Min
• [PATCH] arm64:kconfig: make default for CONFIG_COMPAT   Chanho Min
• [PATCH] arm64:kconfig: make default for CONFIG_COMPAT   Chanho Min
• [PATCH] arm64:kconfig: Add default line for CONFIG_COMPAT   Chanho Min
• [PATCH] arm64:kconfig: make default for CONFIG_COMPAT   Chanho Min
• current->sched_class->yield_task is NULL, any hint?   Lin Ming
• current->sched_class->yield_task is NULL, any hint?   Lin Ming
• current->sched_class->yield_task is NULL, any hint?   Lin Ming
• current->sched_class->yield_task is NULL, any hint?   Lin Ming
• kmalloc and uncached memory   Lin Ming
• kmalloc and uncached memory   Lin Ming
• kmalloc and uncached memory   Lin Ming
• kmalloc and uncached memory   Lin Ming
• current->sched_class->yield_task is NULL, any hint?   Lin Ming
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Matthew Minter
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Matthew Minter
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Matthew Minter
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Matthew Minter
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Matthew Minter
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Matthew Minter
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Matthew Minter
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Matthew Minter
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Matthew Minter
• Fixing PCIe issues on Armada XP   Matthew Minter
• kgdb on ARM printing a bogus OOPs   Corey Minyard
• Linux ARM kernel exception stack init   Mitra, Somnath
• [patch] clk: vexpress: NULL dereference on error path   Pawel Moll
• [PATCH 04/12] clocksource: Sched clock source for Versatile Express   Pawel Moll
• [PATCH 04/12] clocksource: Sched clock source for Versatile Express   Pawel Moll
• [patch] clk: vexpress: NULL dereference on error path   Pawel Moll
• Versatile express lockdep warning on poweroff   Pawel Moll
• [PATCH 0/4] Versatile Express fixes for 3.15   Pawel Moll
• [PATCH 1/4] clk: vexpress: NULL dereference on error path   Pawel Moll
• [PATCH 2/4] arm/mach-vexpress: array accessed out of bounds   Pawel Moll
• [PATCH 3/4] power/reset: vexpress: Fix restart/power off operation   Pawel Moll
• [PATCH 4/4] ARM: vexpress/TC2: Convert OPP voltage to uV before storing   Pawel Moll
• [PATCH 1/3] driver core & of: Mark of_nodes of added device as populated   Pawel Moll
• [PATCH 1/3] driver core & of: Mark of_nodes of added device as populated   Pawel Moll
• [PATCH 1/3] driver core & of: Mark of_nodes of added device as populated   Pawel Moll
• [PATCH 00/10] Versatile Express changes for 3.16   Pawel Moll
• [PATCH 01/10] of: Keep track of populated platform devices   Pawel Moll
• [PATCH 02/10] mfd: vexpress: Convert custom func API to regmap   Pawel Moll
• [PATCH 03/10] mfd: syscon: Add platform data with a regmap config name   Pawel Moll
• [PATCH 04/10] mfd: vexpress: Define the device as MFD cells   Pawel Moll
• [PATCH 05/10] clk: versatile: Split config options for sp810 and vexpress_osc   Pawel Moll
• [PATCH 06/10] clocksource: Sched clock source for Versatile Express   Pawel Moll
• [PATCH 07/10] ARM: vexpress: remove redundant vexpress_dt_cpus_num to get cpu count   Pawel Moll
• [PATCH 08/10] ARM: vexpress: Simplify SMP operations for DT-powered system   Pawel Moll
• [PATCH 09/10] ARM: vexpress: move HBI check to sysreg driver   Pawel Moll
• [PATCH 10/10] hwmon: vexpress: Use devm helper for hwmon device registration   Pawel Moll
• [PATCH 01/10] of: Keep track of populated platform devices   Pawel Moll
• [PATCH v2] of: Keep track of populated platform devices   Pawel Moll
• [PATCH 02/10] mfd: vexpress: Convert custom func API to regmap   Pawel Moll
• [PATCH 02/10] mfd: vexpress: Convert custom func API to regmap   Pawel Moll
• [PATCH 10/10] hwmon: vexpress: Use devm helper for hwmon device registration   Pawel Moll
• [PATCH 10/10] hwmon: vexpress: Use devm helper for hwmon device registration   Pawel Moll
• [PATCH v2] mfd: vexpress: Convert custom func API to regmap   Pawel Moll
• [PATCH v2] hwmon: vexpress: Use devm helper for hwmon device registration   Pawel Moll
• Marvell Orion5x boards with PCIe, and DT conversion   Chris Moore
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Chris Moore
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Chris Moore
• [PATCH 24/29] ARM: orion5x: keep TODO list in edmini_v2 DT   Chris Moore
• Renesas clock clk-mstp updates for clock-indices   Kuninori Morimoto
• [rtc-linux] [PATCH v2 2/3] rtc: Add APM X-Gene SoC RTC driver   Andrew Morton
• [RFC PATCH v5 02/11] ARM SMMU: Add capability IOMMU_CAP_DMA_EXEC   Antonios Motakis
• [RFC PATCH v5 02/11] ARM SMMU: Add capability IOMMU_CAP_DMA_EXEC   Antonios Motakis
• [RFC] TI Reset Driver adapted to the reset core   Dan Murphy
• [RFC 01/11] drivers: reset: TI: SoC reset controller support.   Dan Murphy
• [RFC 02/11] drivers: reset: dra7: Add reset data for dra7xx   Dan Murphy
• [RFC 03/11] drivers: reset: omap5: Add reset data for omap5   Dan Murphy
• [RFC 04/11] drivers: reset: am335: Add reset data for am335   Dan Murphy
• [RFC 05/11] drivers: reset: am43xx: Add reset data for am43xx   Dan Murphy
• [RFC 06/11] ARM: OMAP: Add reset init to prcm file   Dan Murphy
• [RFC 07/11] ARM: TI: Describe the ti reset DT entries   Dan Murphy
• [RFC 08/11] ARM: dts: am33xx: Add prcm_resets node   Dan Murphy
• [RFC 09/11] ARM: dts: am4372: Add prcm_resets node   Dan Murphy
• [RFC 10/11] ARM: dts: dra7: Add prm_resets node   Dan Murphy
• [RFC 11/11] ARM: dts: omap5: Add prm_resets node   Dan Murphy
• [RFC 01/11] drivers: reset: TI: SoC reset controller support.   Dan Murphy
• [RFC 08/11] ARM: dts: am33xx: Add prcm_resets node   Dan Murphy
• [RFC 08/11] ARM: dts: am33xx: Add prcm_resets node   Dan Murphy
• [RESEND: RFC PATCH 3/3] pcie: keystone: add pcie driver based on designware core driver   Andrew Murray
• [RFC 1/4] sched: extend the usage of cpu_power_orig   Preeti U Murthy
• [RFC 4/4] sched: add per group cpu_power_orig   Preeti U Murthy
• [RFC 1/4] sched: extend the usage of cpu_power_orig   Preeti U Murthy
• [PATCH] ARM: errata: Fix the workaround for erratum 764369   Vladimir Murzin
• [PATCH RFC] arm64: 32-bit tolerant sync bitops   Vladimir Murzin
• [PATCH] xen: use sync_clear_bit instead of clear_bit   Vladimir Murzin
• [Xen-devel] [PATCH RFC] arm64: 32-bit tolerant sync bitops   Vladimir Murzin
• [Xen-devel] [PATCH RFC] arm64: 32-bit tolerant sync bitops   Vladimir Murzin
• [Xen-devel] [PATCH RFC] arm64: 32-bit tolerant sync bitops   Vladimir Murzin
• [Xen-devel] [PATCH RFC] arm64: 32-bit tolerant sync bitops   Vladimir Murzin
• [RFC PATCH] arm64: make bitops 32-bit tolerant   Vladimir Murzin
• [RFC PATCH] arm64: make bitops 32-bit tolerant   Vladimir Murzin
• [PATCH] ARM: dts: am335x-boards: Fixup the usb control module address in respective Board files   Mugunthan V N
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH 03/10] ARM: EXYNOS: Move SYSREG definition into sys-reg specific file   Sylwester Nawrocki
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Sylwester Nawrocki
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Sylwester Nawrocki
• [PATCH RFC v5 0/2] clk: Support for DT assigned clock parents and rates   Sylwester Nawrocki
• [PATCH RFC v5 1/2] clk: Add function parsing arbitrary clock list DT property   Sylwester Nawrocki
• [PATCH RFC v5 2/2] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Sylwester Nawrocki
• [PATCH] phy: exynos5-usbdrd: Add facility to toggle vbus gpio on/off   Sylwester Nawrocki
• [PATCH] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC   Sylwester Nawrocki
• [PATCH RFC v5 2/2] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH] ARM: dts: Fix PL330 MDMA clock assignment for Exynos4x12   Sylwester Nawrocki
• [PATCH] ARM: dts: Add rear camera nodes for Exynos4412 Trats2 board   Sylwester Nawrocki
• [PATCH] ARM: dts: exynos4: Update camera nodes for Trats2 board   Sylwester Nawrocki
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Sylwester Nawrocki
• [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver   Sylwester Nawrocki
• [PATCH] clk: exynos4: Use single clock ID for CLK_MDMA gate clocks   Sylwester Nawrocki
• [PATCH 0/5] Exynos4 SoC camera subsystem driver cleanups   Sylwester Nawrocki
• [PATCH 1/5] ARM: S5PV210: Remove camera support from mach-goni.c   Sylwester Nawrocki
• [PATCH 2/5] exynos4-is: Fix compilation for !CONFIG_COMMON_CLK   Sylwester Nawrocki
• [PATCH 3/5] exynos4-is: Remove support for non-dt platforms   Sylwester Nawrocki
• [PATCH 4/5] exynos4-is: Remove requirement for "simple-bus" compatible   Sylwester Nawrocki
• [PATCH 5/5] ARM: dts: exynos4: Remove simple-bus compatible from camera subsystem nodes   Sylwester Nawrocki
• [PATCH 4/5] exynos4-is: Remove requirement for "simple-bus" compatible   Sylwester Nawrocki
• [PATCH] clkdev: only fall through to clk_get_sys() if DT indicates no entry   Sylwester Nawrocki
• [PATCH 0/2] OMAP2+: optional clock handling fixes   Rajendra Nayak
• [PATCH 1/2] gpio: omap: prepare and unprepare the debounce clock   Rajendra Nayak
• [PATCH 2/2] ARM: OMAP2+: hwmod: Don't leave the optional clocks in clk_prepare()ed state   Rajendra Nayak
• [PATCH 1/3] Documentation: dts: OMAP: Fix typos in DRA752 device name   Rajendra Nayak
• [PATCH v2 0/4] ARM: DRA7: Add support for DRA72x devices   Rajendra Nayak
• [PATCH v2 1/4] ARM: dts: dra7-evm: Remove the wrong and undocumented compatible   Rajendra Nayak
• [PATCH v2 2/4] ARM: dts: Add support for DRA72x family of devices   Rajendra Nayak
• [PATCH v2 3/4] ARM: OMAP2+: Add machine entry for dra72x devices   Rajendra Nayak
• [PATCH v2 4/4] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients   Rajendra Nayak
• [PATCH v2 3/4] ARM: OMAP2+: Add machine entry for dra72x devices   Rajendra Nayak
• [PATCH v3 0/4] ARM: DRA7: Add support for DRA72x devices   Rajendra Nayak
• [PATCH v3 1/4] ARM: dts: dra7-evm: Remove the wrong and undocumented compatible   Rajendra Nayak
• [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices   Rajendra Nayak
• [PATCH v3 3/4] ARM: OMAP2+: Add machine entry for dra72x devices   Rajendra Nayak
• [PATCH v3 4/4] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients   Rajendra Nayak
• [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices   Rajendra Nayak
• [PATCH v3 3/4] ARM: OMAP2+: Add machine entry for dra72x devices   Rajendra Nayak
• [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices   Rajendra Nayak
• [PATCH v4 0/5] ARM: DRA7: Add support for DRA72x devices   Rajendra Nayak
• [PATCH v4 1/5] ARM: dts: dra7-evm: Remove the wrong and undocumented compatible   Rajendra Nayak
• [PATCH v4 2/5] ARM: dts: Add support for DRA72x family of devices   Rajendra Nayak
• [PATCH v4 3/5] ARM: OMAP2+: Replace all __initdata with __initconst for const init   Rajendra Nayak
• [PATCH v4 4/5] ARM: OMAP2+: Add machine entry for dra72x devices   Rajendra Nayak
• [PATCH v4 5/5] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients   Rajendra Nayak
• [PATCH v4 5/5] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients   Rajendra Nayak
• Recent 3.x kernels: Memory leak causing OOMs   NeilBrown
• FEC ethernet issues [Was: PL310 errata workarounds]   Eric Nelson
• FEC ethernet issues [Was: PL310 errata workarounds]   Eric Nelson
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Robert Nelson
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Robert Nelson
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Robert Nelson
• [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller   Robert Nelson
• [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek   Robert Nelson
• [PATCH] ARM: dts: Add support for the BeagleBoard xM A/B   Robert Nelson
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Oleg Nesterov
• [RFC PATCH] ARM: uprobes need icache flush after xol write   Oleg Nesterov
• [PATCH v2] ARM: uprobes need icache flush after xol write   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH] uprobes: copy to user-space xol page with proper cache flushing   Oleg Nesterov
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Oleg Nesterov
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   Oleg Nesterov
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Oleg Nesterov
• [RFC PATCH v3] ARM: uprobes need icache flush after xol write   Oleg Nesterov
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Oleg Nesterov
• [RFC PATCH v4] ARM: uprobes xol write directly to userspace   Oleg Nesterov
• [PATCH v5] ARM: uprobes need icache flush after xol write   Oleg Nesterov
• [PATCH 3/6] ARM: socfpga: dts: add i2c busses   Dinh Nguyen
• [PATCH 4/6] ARM: socfpga: dts: add can0+1   Dinh Nguyen
• [PATCH v2 1/6] ARM: socfpga: dts: fix pdma interrupt   Dinh Nguyen
• [PATCH 1/2] ARM: socfpga: dts: add eeprom, lcd, and rtc on i2c0   Dinh Nguyen
• [PATCH] ARM: socfpga: dts: convert to preprocessor includes   Dinh Nguyen
• [PATCH 3/3] ARM: socfpga: dts: add reset-controller   Dinh Nguyen
• [PATCH 3/3] ARM: socfpga: dts: add reset-controller   Dinh Nguyen
• [PATCH v2 1/4] reset: add driver for socfpga   Dinh Nguyen
• [PATCH] dts: socfpga: Add DTS entries for USB   Dinh Nguyen
• [PATCH v2 1/4] reset: add driver for socfpga   Dinh Nguyen
• [PATCH v3 1/4] reset: add driver for socfpga   Dinh Nguyen
• [PATCH v3 1/4] reset: add driver for socfpga   Dinh Nguyen
• [PATCH 1/2] clk: socfpga: add divider registers to the main pll outputs   Dinh Nguyen
• [PATCH 1/2] clk: socfpga: add divider registers to the main pll outputs   Dinh Nguyen
• [PATCH] clk: socfpga: fix clock driver for 3.15   Dinh Nguyen
• socfpga in 3.15-rc2   Dinh Nguyen
• can problems on socfpga [was Re: [PATCH v2 4/6] ARM: socfpga: dts: add can0+1]   Dinh Nguyen
• [PATCH 15/16] ARM: l2c: convert socfpga to generic l2c initialisation   Dinh Nguyen
• [PATCH] clk: socfpga: fix clock driver for 3.15   Dinh Nguyen
• [PATCH] arm: socfpga: reserve the region at start of phys mem   Dinh Nguyen
• kdump for ARM Linux?   Andy Nicholas
• [PATCH] DT: Vendor: add prefix for TQ Systems   Markus Niebel
• [RFC 0/3] DRM driver for the ATMEL High end LCD controller   Tim Niemeyer
• [RFC 0/3] DRM driver for the ATMEL High end LCD controller   Tim Niemeyer
• [PATCH 63/75] ARM: l2c: zynq: remove cache size override   Sekhar Nori
• [PATCH 63/75] ARM: l2c: zynq: remove cache size override   Sekhar Nori
• [PATCH v2 0/3] ARM: OMAP2+: AM437x: L2 cache support   Sekhar Nori
• [PATCH v2 1/3] ARM: OMAP2+: L2 cache: allow different aux ctrl settings   Sekhar Nori
• [PATCH v2 2/3] ARM: OMAP2+: L2 cache: get rid of init call   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Sekhar Nori
• [PATCH v2 07/14] arm: common: edma: API to request non default queue for a channel   Sekhar Nori
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Sekhar Nori
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Sekhar Nori
• [PATCH] arm: edma: Fix xbar mapping   Sekhar Nori
• [PATCH v2 05/14] arm: common: edma: Select event queue 1 as default when booted with DT   Sekhar Nori
• [PATCH v2 3/8] davinci: da850: Use cpufreq_for_each_entry macro for iteration   Sekhar Nori
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [PATCH v3 0/3] ARM: OMAP2+: AM437x: L2 cache support   Sekhar Nori
• [PATCH v3 1/3] ARM: OMAP2+: L2 cache: get rid of init call   Sekhar Nori
• [PATCH v3 2/3] ARM: OMAP2+: L2 cache: git rid of redundant cache replacement policy setting   Sekhar Nori
• [PATCH v3 3/3] ARM: OMAP2+: AM43x: L2 cache support   Sekhar Nori
• [patch V2 5/6] edma: Make reading the position of active channels work   Sekhar Nori
• [PATCH] arm: edma: Fix xbar mapping   Sekhar Nori
• [PATCH V3 00/20] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Sekhar Nori
• [GIT PULL] DaVinci fixes for v3.15   Sekhar Nori
• [PATCH v5 0/8] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [PATCH 01/15] mtd: st_spi_fsm: Add Macronix MX25L25655E device   Brian Norris
• [PATCH 07/15] mtd: st_spi_fsm: Extend fsm_clear_fifo to handle unwanted bytes   Brian Norris
• [PATCH 14/15] mtd: st_spi_fsm: Provide mask to obtain correct boot device pins   Brian Norris
• [PATCH 00/15] mtd: st_spi_fsm: Align with ST's internal development   Brian Norris
• [PATCH v5 1/8] mtd: spi-nor: copy the SPI NOR commands to a new header file   Brian Norris
• [PATCH v5 3/8] mtd: spi-nor: add the framework for SPI NOR   Brian Norris
• [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework   Brian Norris
• [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework   Brian Norris
• [PATCH v5 0/8] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w   Brian Norris
• [PATCH v3 10/21] mtd: support BB SRAM on ICP DAS LP-8x4x   Brian Norris
• [PATCH v2] mtd: davinci-nand: disable subpage write for keystone-nand   Brian Norris
• [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)   Brian Norris
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)   Brian Norris
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v4 10/21] mtd: support BB SRAM on ICP DAS LP-8x4x   Brian Norris
• [PATCH v3 1/9] mtd: nand: define struct nand_timings   Brian Norris
• [PATCH v3 2/9] mtd: nand: add ONFI timing mode to nand_timings converter   Brian Norris
• [PATCH v3 3/9] of: mtd: add NAND timing mode retrieval support   Brian Norris
• [PATCH v2] mtd: davinci-nand: disable subpage write for keystone-nand   Brian Norris
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2 00/12] defconfigs: add MTD_SPI_NOR (new subsystem dependency for M25P80)   Brian Norris
• [PATCH v2 01/12] ARM: imx/mxs defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2 02/12] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2 03/12] ARM: keystone: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2 04/12] ARM: tegra: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2 05/12] ARM: lpc32xx: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2 06/12] ARM: at91: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2 07/12] ARM: shmobile: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2 08/12] ARM: marvell: add MTD_SPI_NOR (new dependency for M25P80)   Brian Norris
• [PATCH v2] arm64: enable EDAC on arm64   Tomasz Nowicki
• [PATCH v2] arm64: enable EDAC on arm64   Tomasz Nowicki
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Jiri Olsa
• [PATCH] gpio/at91: free GPIO after configuring as input   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl/at91: Fix pin_to_mask   Jean-Christophe PLAGNIOL-VILLARD
• ethaddr0 alias for imx6   Hector Palacios
• [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup   Markus Pargmann
• [PATCH v2 11/16] ASoC: fsl-ssi: Fix register values when disabling   Markus Pargmann
• [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup   Markus Pargmann
• [alsa-devel] [PATCH v2 00/16] ASoC: fsl-ssi: Driver cleanup   Markus Pargmann
• [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup   Markus Pargmann
• [PATCH v3 01/18] ASoC: fsl-ssi: Fix register values when disabling   Markus Pargmann
• [PATCH v3 02/18] ASoC: fsl-ssi: Move debugging to seperate file   Markus Pargmann
• [PATCH v3 03/18] ASoC: fsl-ssi: Use dev_name for DAI driver struct   Markus Pargmann
• [PATCH v3 04/18] ASoC: fsl-ssi: Move imx-specific probe to seperate function   Markus Pargmann
• [PATCH v3 05/18] ASoC: fsl-ssi: Remove useless DMA code   Markus Pargmann
• [PATCH v3 06/18] ASoC: fsl-ssi: Cleanup probe function   Markus Pargmann
• [PATCH v3 07/18] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private   Markus Pargmann
• [PATCH v3 08/18] ASoC: fsl-ssi: introduce SoC specific data   Markus Pargmann
• [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used   Markus Pargmann
• [PATCH v3 10/18] ASoC: fsl-ssi: make fsl,mode property optional   Markus Pargmann
• [PATCH v3 11/18] ASoC: fsl-ssi: Transmit enable synchronization   Markus Pargmann
• [PATCH v3 12/18] ASoC: fsl-ssi: Move fsl_ssi_set_dai_sysclk above fsl_ssi_hw_params   Markus Pargmann
• [PATCH v3 13/18] ASoC: fsl-ssi: set bitclock in master mode from hw_params   Markus Pargmann
• [PATCH v3 14/18] ASoC: fsl-ssi: remove unnecessary spinlock   Markus Pargmann
• [PATCH v3 15/18] ASoC: fsl-ssi: Allow first stream to set the bitclock   Markus Pargmann
• [PATCH v3 16/18] ASoC: fsl-ssi: Set framerate divider correctly for i2s master mode   Markus Pargmann
• [PATCH v3 17/18] ASoC: fsl-ssi: reorder and document fsl_ssi_private   Markus Pargmann
• [PATCH v3 18/18] ASoC: fsl-ssi: Use regmap   Markus Pargmann
• [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used   Markus Pargmann
• [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used   Markus Pargmann
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Markus Pargmann
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Markus Pargmann
• [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup   Markus Pargmann
• [PATCH v4 00/17] ASoC: fsl-ssi: Driver cleanup   Markus Pargmann
• [PATCH v4 01/17] ASoC: fsl-ssi: Fix register values when disabling   Markus Pargmann
• [PATCH v4 02/17] ASoC: fsl-ssi: Move debugging to seperate file   Markus Pargmann
• [PATCH v4 03/17] ASoC: fsl-ssi: Use dev_name for DAI driver struct   Markus Pargmann
• [PATCH v4 04/17] ASoC: fsl-ssi: Move imx-specific probe to seperate function   Markus Pargmann
• [PATCH v4 05/17] ASoC: fsl-ssi: Remove useless DMA code   Markus Pargmann
• [PATCH v4 06/17] ASoC: fsl-ssi: Cleanup probe function   Markus Pargmann
• [PATCH v4 07/17] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private   Markus Pargmann
• [PATCH v4 08/17] ASoC: fsl-ssi: introduce SoC specific data   Markus Pargmann
• [PATCH v4 09/17] ASoC: fsl-ssi: make fsl,mode property optional   Markus Pargmann
• [PATCH v4 10/17] ASoC: fsl-ssi: Transmit enable synchronization   Markus Pargmann
• [PATCH v4 11/17] ASoC: fsl-ssi: Move fsl_ssi_set_dai_sysclk above fsl_ssi_hw_params   Markus Pargmann
• [PATCH v4 12/17] ASoC: fsl-ssi: set bitclock in master mode from hw_params   Markus Pargmann
• [PATCH v4 13/17] ASoC: fsl-ssi: remove unnecessary spinlock   Markus Pargmann
• [PATCH v4 14/17] ASoC: fsl-ssi: Set framerate divider correctly for i2s master mode   Markus Pargmann
• [PATCH v4 15/17] ASoC: fsl-ssi: Fix baudclock handling   Markus Pargmann
• [PATCH v4 16/17] ASoC: fsl-ssi: reorder and document fsl_ssi_private   Markus Pargmann
• [PATCH v4 17/17] ASoC: fsl-ssi: Use regmap   Markus Pargmann
• [PATCH 21/38] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Markus Pargmann
• [PATCH] ARM: imx: imx6q, Add i2c4 clock to the clock tree   Markus Pargmann
• [PATCH 0/3] ARM: dts: imx6 fsl-ssi and i2c4   Markus Pargmann
• [PATCH 1/3] arm: dts: imx6qdl, remove fsl,ssi-dma-events   Markus Pargmann
• [PATCH 2/3] arm: dts: imx6* Add clock-names for all ssi nodes   Markus Pargmann
• [PATCH 3/3] ARM: dts: imx6dl, fix i2c4 device node   Markus Pargmann
• [PATCH] ARM: imx: imx6q, Add i2c4 clock to the clock tree   Markus Pargmann
• [PATCH 1/3] arm: dts: imx6qdl, remove fsl,ssi-dma-events   Markus Pargmann
• [PATCH 3/3] ARM: dts: imx6dl, fix i2c4 device node   Markus Pargmann
• [PATCH 2/3] arm: dts: imx6* Add clock-names for all ssi nodes   Markus Pargmann
• [PATCH 02/27] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250   Chanho Park
• [PATCH 21/27] ARM: dts: exynos3250: Add PMU dt data   Chanho Park
• [PATCH 07/27] irqchip: Declare cortex-a7's irqchip to initialize gic from dt   Chanho Park
• [PATCH 0/4] Enable usbphy and hsotg for exynos4   Chanho Park
• [PATCH 1/4] ARM: dts: exynos4: add PMU syscon node   Chanho Park
• [PATCH 2/4] ARM: dts: exynos4: add exynos_usbphy node   Chanho Park
• [PATCH 3/4] ARM: dts: exynos4: add hsotg device node   Chanho Park
• [PATCH 4/4] ARM: dts: exynos4412-trats2: enable usb nodes   Chanho Park
• [PATCH] ARM: dts: exynos4: clean up arm-pmu node   Chanho Park
• [PATCH] ARM: dts: exynos4: clean up arm-pmu node   Chanho Park
• [PATCHv2] ARM: dts: exynos4: clean up arm-pmu node   Chanho Park
• [PATCH-RESEND] ARM: dts: Add arm-pmu node for exynos4412   Chanho Park
• [PATCH v6 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v6 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Anup Patel
• [PATCH v6 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v6 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v7 00/12] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Anup Patel
• [PATCH v7 01/12] KVM: Add capability to advertise PSCI v0.2 support   Anup Patel
• [PATCH v7 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v7 03/12] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Anup Patel
• [PATCH v7 04/12] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature   Anup Patel
• [PATCH v7 05/12] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Anup Patel
• [PATCH v7 06/12] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Anup Patel
• [PATCH v7 07/12] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET   Anup Patel
• [PATCH v7 08/12] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Anup Patel
• [PATCH v7 09/12] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions   Anup Patel
• [PATCH v7 10/12] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2   Anup Patel
• [PATCH v7 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Anup Patel
• [PATCH v7 12/12] ARM/ARM64: KVM: Advertise KVM_CAP_ARM_PSCI_0_2 to user space   Anup Patel
• [PATCH v7 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v7 09/12] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions   Anup Patel
• [PATCH v7 10/12] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2   Anup Patel
• [PATCH v7 08/12] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Anup Patel
• [PATCH v7 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Anup Patel
• [PATCH v8 00/12] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Anup Patel
• [PATCH v8 01/12] KVM: Add capability to advertise PSCI v0.2 support   Anup Patel
• [PATCH v8 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v8 03/12] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Anup Patel
• [PATCH v8 04/12] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature   Anup Patel
• [PATCH v8 05/12] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Anup Patel
• [PATCH v8 06/12] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Anup Patel
• [PATCH v8 07/12] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET   Anup Patel
• [PATCH v8 08/12] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Anup Patel
• [PATCH v8 09/12] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions   Anup Patel
• [PATCH v8 10/12] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2   Anup Patel
• [PATCH v8 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Anup Patel
• [PATCH v8 12/12] ARM/ARM64: KVM: Advertise KVM_CAP_ARM_PSCI_0_2 to user space   Anup Patel
• [PATCH v8 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v9 00/12] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Anup Patel
• [PATCH v9 01/12] KVM: Add capability to advertise PSCI v0.2 support   Anup Patel
• [PATCH v9 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v9 03/12] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Anup Patel
• [PATCH v9 04/12] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature   Anup Patel
• [PATCH v9 05/12] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Anup Patel
• [PATCH v9 06/12] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Anup Patel
• [PATCH v9 07/12] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET   Anup Patel
• [PATCH v9 08/12] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Anup Patel
• [PATCH v9 09/12] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions   Anup Patel
• [PATCH v9 10/12] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2   Anup Patel
• [PATCH v9 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Anup Patel
• [PATCH v9 12/12] ARM/ARM64: KVM: Advertise KVM_CAP_ARM_PSCI_0_2 to user space   Anup Patel
• [PATCH v9 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v9 05/12] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Anup Patel
• [PATCH v9 08/12] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Anup Patel
• [PATCH v9 07/12] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET   Anup Patel
• [PATCH v6 1/3] PSCI: Add initial support for PSCIv0.2 functions   Anup Patel
• [PATCH v10 00/12] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Anup Patel
• [PATCH v10 01/12] KVM: Add capability to advertise PSCI v0.2 support   Anup Patel
• [PATCH v10 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v10 03/12] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Anup Patel
• [PATCH v10 04/12] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature   Anup Patel
• [PATCH v10 05/12] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Anup Patel
• [PATCH v10 06/12] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Anup Patel
• [PATCH v10 07/12] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET   Anup Patel
• [PATCH v10 08/12] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Anup Patel
• [PATCH v10 09/12] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions   Anup Patel
• [PATCH v10 10/12] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2   Anup Patel
• [PATCH v10 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Anup Patel
• [PATCH v10 12/12] ARM/ARM64: KVM: Advertise KVM_CAP_ARM_PSCI_0_2 to user space   Anup Patel
• [PATCH v6 1/3] PSCI: Add initial support for PSCIv0.2 functions   Anup Patel
• [PATCH v8 3/3] ARM: Check if a CPU has gone offline   Anup Patel
• [PATCH v10 07/12] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET   Anup Patel
• [PATCH v10 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v11 00/12] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Anup Patel
• [PATCH v11 01/12] KVM: Add capability to advertise PSCI v0.2 support   Anup Patel
• [PATCH v11 02/12] ARM/ARM64: KVM: Add common header for PSCI related defines   Anup Patel
• [PATCH v11 03/12] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Anup Patel
• [PATCH v11 04/12] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature   Anup Patel
• [PATCH v11 05/12] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Anup Patel
• [PATCH v11 06/12] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Anup Patel
• [PATCH v11 07/12] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET   Anup Patel
• [PATCH v11 08/12] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Anup Patel
• [PATCH v11 09/12] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions   Anup Patel
• [PATCH v11 10/12] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2   Anup Patel
• [PATCH v11 11/12] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Anup Patel
• [PATCH v11 12/12] ARM/ARM64: KVM: Advertise KVM_CAP_ARM_PSCI_0_2 to user space   Anup Patel
• [RFC PATCH] imx6: imx6duallite/solo i2c4 clock   Iain Paton
• [RFC PATCH] imx6: imx6duallite/solo i2c4 clock   Iain Paton
• [PATCH] ARM: imx6: clk: i.MX6 DualLite/Solo i2c4 clock   Iain Paton
• [PATCH] ARM: imx6: clk: i.MX6 DualLite/Solo i2c4 clock   Iain Paton
• [PATCH 1/1] AArch64: TCR_TG1_64K incorrectly sets TCR_EL1 bits [31:30]   Joe Perches
• [PATCH 1/1] AArch64: TCR_TG1_64K incorrectly sets TCR_EL1 bits [31:30]   Joe Perches
• [PATCH -next 3.16 00/19] treewide: Convert typedef ctl_table   Joe Perches
• [PATCH -next 3.16 01/19] arm: Convert use of typedef ctl_table to struct ctl_table   Joe Perches
• [PATCH 1/4] mmc: sdhci: add a driver for Berlin SoCs   Joe Perches
• [PATCH v3 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.   Joe Perches
• [PATCH v3 1/4] MAINTAINERS: Add entry for APM X-Gene SoC ethernet driver   Joe Perches
• [PATCH 2/2] net: mvneta: fix usage as a module on RGMII configurations   Thomas Petazzoni
• [PATCH 0/3] ARM: implement workaround for Cortex-A9/PL310/PCIe deadlock   Thomas Petazzoni
• Armada XP (mvebu) PCIe memory (BAR/window) re-allocation   Thomas Petazzoni
• mach header files   Thomas Petazzoni
• [PATCH v2 00/10] ARM: mvebu: Hardware coherency support for Armada 375 and 38x   Thomas Petazzoni
• [PATCH v2 01/10] ARM: mvebu: prepare coherency code to support more SOCs   Thomas Petazzoni
• [PATCH v2 02/10] ARM: mvebu: add a coherency_available() call   Thomas Petazzoni
• [PATCH v2 03/10] bus: mvebu: pass the coherency availability information at init time   Thomas Petazzoni
• [PATCH v2 04/10] ARM: mvebu: ARM: mvebu: use of_find_matching_node_and_match() in coherency.c   Thomas Petazzoni
• [PATCH v2 05/10] ARM: mvebu: enable the ARM SCU on Armada 375 and Armada 38x   Thomas Petazzoni
• [PATCH v2 06/10] ARM: mvebu: add Armada 375 support to the coherency code   Thomas Petazzoni
• [PATCH v2 07/10] ARM: mvebu: implement Armada 375 coherency workaround   Thomas Petazzoni
• [PATCH v2 08/10] ARM: mvebu: add Armada 38x support to the coherency code   Thomas Petazzoni
• [PATCH v2 09/10] ARM: mvebu: enable the coherency fabric on Armada 375   Thomas Petazzoni
• [PATCH v2 10/10] ARM: mvebu: enable the coherency fabric on Armada 38x   Thomas Petazzoni
• [PATCH v2 0/6] ARM: mvebu: prepare PMSU code for cpuidle and Armada 375/38x SMP   Thomas Petazzoni
• [PATCH v2 1/6] ARM: mvebu: introduce CPU reset code   Thomas Petazzoni
• [PATCH v2 2/6] ARM: mvebu: start using the CPU reset driver   Thomas Petazzoni
• [PATCH v2 3/6] ARM: mvebu: improve PMSU driver to request its resource   Thomas Petazzoni
• [PATCH v2 4/6] ARM: mvebu: extend the PMSU registers   Thomas Petazzoni
• [PATCH v2 5/6] ARM: mvebu: switch to the new PMSU binding in Armada 370/XP Device Tree   Thomas Petazzoni
• [PATCH v2 6/6] ARM: mvebu: use a separate function to set the boot address of CPUs   Thomas Petazzoni
• [PATCH v2 00/11] SMP support for Armada 375 and 38x   Thomas Petazzoni
• [PATCH v2 01/11] ARM: mvebu: move Armada XP specific SMP initialization to platsmp.c   Thomas Petazzoni
• [PATCH v2 02/11] ARM: mvebu: use CPU_METHOD_OF_DECLARE for SMP on Armada XP   Thomas Petazzoni
• [PATCH v2 03/11] ARM: mvebu: add enable-method property for CPUs   Thomas Petazzoni
• [PATCH v2 04/11] irqchip: irq-armada-370-xp: do the set_smp_cross_call() in the driver   Thomas Petazzoni
• [PATCH v2 05/11] irqchip: irq-armada-370-xp: use cpu notifier to initialize secondary CPUs   Thomas Petazzoni
• [PATCH v2 06/11] ARM: mvebu: add function to set the resume boot address for Armada 375   Thomas Petazzoni
• [PATCH v2 07/11] ARM: mvebu: add Armada 38x compatible string to pmsu   Thomas Petazzoni
• [PATCH v2 08/11] ARM: mvebu: add SMP support for Armada 375 and Armada 38x   Thomas Petazzoni
• [PATCH v2 09/11] ARM: mvebu: add workaround for SMP support for Armada 375 stepping Z1   Thomas Petazzoni
• [PATCH v2 10/11] ARM: mvebu: add SMP support in the Armada 375 device tree   Thomas Petazzoni
• [PATCH v2 11/11] ARM: mvebu: add SMP support in the Armada 38x device tree   Thomas Petazzoni
• [PATCH 0/2] ARM: mvebu: enable SDHCI interface on Armada 38x   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: enable the SDHCI interface on Armada 385   Thomas Petazzoni
• [PATCH 2/2] ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the relevant defconfigs   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: enable the SDHCI interface on Armada 385   Thomas Petazzoni
• [PATCH 2/2] ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the relevant defconfigs   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• [PATCH 0/3] ARM: implement workaround for Cortex-A9/PL310/PCIe deadlock   Thomas Petazzoni
• [PATCH 0/4] Support for Marvell AHCI interface on Armada 38x   Thomas Petazzoni
• [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces   Thomas Petazzoni
• [PATCH 2/4] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x   Thomas Petazzoni
• [PATCH 3/4] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig   Thomas Petazzoni
• [PATCH 4/4] ARM: configs: add ahci_mvebu to multi_v7_defconfig   Thomas Petazzoni
• [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces   Thomas Petazzoni
• [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces   Thomas Petazzoni
• Big endian working?   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• [PATCH 2/3] ARM: mm: add support for HW coherent systems in PL310   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Intel I350 mini-PCIe card (igb) on Mirabox (mvebu / Armada 370)   Thomas Petazzoni
• Big endian working?   Thomas Petazzoni
• [PATCH v2] bus: mvebu-mbus: Avoid setting an undefined window size   Thomas Petazzoni
• [PATCH v2] bus: mvebu-mbus: Avoid setting an undefined window size   Thomas Petazzoni
• [PATCH 2/2] net: mvneta: fix usage as a module on RGMII configurations   Thomas Petazzoni
• [PATCH v2] bus: mvebu-mbus: Avoid setting an undefined window size   Thomas Petazzoni
• [PATCH] memory: mvebu-devbus: fix the conversion of the bus width   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• Marvell Orion5x boards with PCIe, and DT conversion   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• [REGRESSION,BISECTED] mvneta broken in 3.14 on RN2120, RN102 and RN104 after e3a8786c10e7   Thomas Petazzoni
• [PATCH] Revert "net: mvneta: fix usage as a module on RGMII configurations"   Thomas Petazzoni
• [PATCH 00/29] ARM: orion5x: big step towards DT conversion   Thomas Petazzoni
• [PATCH 01/29] ARM: orion5x: fix target ID for crypto SRAM window   Thomas Petazzoni
• [PATCH 02/29] pinctrl: mvebu: new driver for Orion platforms   Thomas Petazzoni
• [PATCH 03/29] clk: mvebu: add Orion5x clock driver   Thomas Petazzoni
• [PATCH 04/29] memory: mvebu-devbus: fix the conversion of the bus width   Thomas Petazzoni
• [PATCH 05/29] memory: mvebu-devbus: use ARMADA_ prefix in defines   Thomas Petazzoni
• [PATCH 06/29] memory: mvebu-devbus: split functions   Thomas Petazzoni
• [PATCH 07/29] memory: mvebu-devbus: add Orion5x support   Thomas Petazzoni
• [PATCH 08/29] ARM: orion5x: move interrupt controller node into ocp   Thomas Petazzoni
• [PATCH 09/29] ARM: orion5x: switch to preprocessor includes in DT   Thomas Petazzoni
• [PATCH 10/29] ARM: orion5x: use existing dt-bindings include for Device Tree files   Thomas Petazzoni
• [PATCH 11/29] ARM: orion5x: convert DT to use the mvebu-mbus driver   Thomas Petazzoni
• [PATCH 12/29] ARM: orion5x: add interrupt for Ethernet in Device Tree   Thomas Petazzoni
• [PATCH 13/29] ARM: orion5x: switch to use the clock driver for DT platforms   Thomas Petazzoni
• [PATCH 14/29] ARM: orion: switch to a per-platform handle_irq() function   Thomas Petazzoni
• [PATCH 15/29] ARM: orion5x: switch to DT interrupts and timer   Thomas Petazzoni
• [PATCH 16/29] ARM: orion5x: enable pinctrl driver at SoC level   Thomas Petazzoni
• [PATCH 17/29] ARM: orion5x: update I2C description at SoC level   Thomas Petazzoni
• [PATCH 18/29] ARM: orion5x: add Device Bus description at SoC level   Thomas Petazzoni
• [PATCH 19/29] ARM: orion5x: add standard pinctrl configs for sata0 and sata1   Thomas Petazzoni
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Thomas Petazzoni
• [PATCH 21/29] ARM: orion5x: use DT to describe I2C devices on edmini_v2   Thomas Petazzoni
• [PATCH 22/29] ARM: orion5x: use DT to describe EHCI on edmini_v2   Thomas Petazzoni
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Thomas Petazzoni
• [PATCH 24/29] ARM: orion5x: keep TODO list in edmini_v2 DT   Thomas Petazzoni
• [PATCH 25/29] ARM: orion5x: remove unneeded code for edmini_v2   Thomas Petazzoni
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Thomas Petazzoni
• [PATCH 27/29] ARM: orion5x: convert d2net to Device Tree   Thomas Petazzoni
• [PATCH 28/29] ARM: orion: remove no longer needed DT IRQ code   Thomas Petazzoni
• [PATCH 29/29] ARM: orion: remove no longer needed gpio DT code   Thomas Petazzoni
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Thomas Petazzoni
• [PATCH 21/29] ARM: orion5x: use DT to describe I2C devices on edmini_v2   Thomas Petazzoni
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Thomas Petazzoni
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Thomas Petazzoni
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Thomas Petazzoni
• Marvell Orion5x boards with PCIe, and DT conversion   Thomas Petazzoni
• Marvell Orion5x boards with PCIe, and DT conversion   Thomas Petazzoni
• [PATCH 20/29] ARM: orion5x: convert edmini_v2 to DT pinctrl   Thomas Petazzoni
• [PATCH 23/29] ARM: orion5x: use DT to describe NOR on edmini_v2   Thomas Petazzoni
• [PATCH 1/2] ARM: add cpu_is_pj4() to distinguish PJ4 core   Thomas Petazzoni
• [PATCH v3 00/10] ARM: mvebu: Hardware coherency support for Armada 375 and 38x   Thomas Petazzoni
• [PATCH v3 01/10] ARM: mvebu: prepare coherency code to support more SOCs   Thomas Petazzoni
• [PATCH v3 02/10] ARM: mvebu: add a coherency_available() call   Thomas Petazzoni
• [PATCH v3 03/10] bus: mvebu: pass the coherency availability information at init time   Thomas Petazzoni
• [PATCH v3 04/10] ARM: mvebu: ARM: mvebu: use of_find_matching_node_and_match() in coherency.c   Thomas Petazzoni
• [PATCH v3 05/10] ARM: mvebu: enable the ARM SCU on Armada 375 and Armada 38x   Thomas Petazzoni
• [PATCH v3 06/10] ARM: mvebu: add Armada 375 support to the coherency code   Thomas Petazzoni
• [PATCH v3 07/10] ARM: mvebu: implement Armada 375 coherency workaround   Thomas Petazzoni
• [PATCH v3 08/10] ARM: mvebu: add Armada 38x support to the coherency code   Thomas Petazzoni
• [PATCH v3 09/10] ARM: mvebu: enable the coherency fabric on Armada 375   Thomas Petazzoni
• [PATCH v3 10/10] ARM: mvebu: enable the coherency fabric on Armada 38x   Thomas Petazzoni
• [PATCH v3 0/6] ARM: mvebu: prepare PMSU code for cpuidle and Armada 375/38x SMP   Thomas Petazzoni
• [PATCH v3 1/6] ARM: mvebu: introduce CPU reset code   Thomas Petazzoni
• [PATCH v3 2/6] ARM: mvebu: start using the CPU reset driver   Thomas Petazzoni
• [PATCH v3 3/6] ARM: mvebu: improve PMSU driver to request its resource   Thomas Petazzoni
• [PATCH v3 4/6] ARM: mvebu: extend the PMSU registers   Thomas Petazzoni
• [PATCH v3 5/6] ARM: mvebu: switch to the new PMSU binding in Armada 370/XP Device Tree   Thomas Petazzoni
• [PATCH v3 6/6] ARM: mvebu: use a separate function to set the boot address of CPUs   Thomas Petazzoni
• [PATCH v3 00/11] SMP support for Armada 375 and 38x   Thomas Petazzoni
• [PATCH v3 01/11] ARM: mvebu: move Armada XP specific SMP initialization to platsmp.c   Thomas Petazzoni
• [PATCH v3 02/11] ARM: mvebu: use CPU_METHOD_OF_DECLARE for SMP on Armada XP   Thomas Petazzoni
• [PATCH v3 03/11] ARM: mvebu: add enable-method property for CPUs   Thomas Petazzoni
• [PATCH v3 04/11] irqchip: irq-armada-370-xp: do the set_smp_cross_call() in the driver   Thomas Petazzoni
• [PATCH v3 05/11] irqchip: irq-armada-370-xp: use cpu notifier to initialize secondary CPUs   Thomas Petazzoni
• [PATCH v3 06/11] ARM: mvebu: add function to set the resume boot address for Armada 375   Thomas Petazzoni
• [PATCH v3 07/11] ARM: mvebu: add Armada 38x compatible string to pmsu   Thomas Petazzoni
• [PATCH v3 08/11] ARM: mvebu: add SMP support for Armada 375 and Armada 38x   Thomas Petazzoni
• [PATCH v3 09/11] ARM: mvebu: add workaround for SMP support for Armada 375 stepping Z1   Thomas Petazzoni
• [PATCH v3 10/11] ARM: mvebu: add SMP support in the Armada 375 device tree   Thomas Petazzoni
• [PATCH v3 11/11] ARM: mvebu: add SMP support in the Armada 38x device tree   Thomas Petazzoni
• [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x   Thomas Petazzoni
• [PATCH v2 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles   Thomas Petazzoni
• [PATCH v2 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces   Thomas Petazzoni
• [PATCH v2 3/5] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x   Thomas Petazzoni
• [PATCH v2 4/5] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig   Thomas Petazzoni
• [PATCH v2 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig   Thomas Petazzoni
• [PATCH v2 0/3] ARM: mvebu: enable SDHCI interface on Armada 38x   Thomas Petazzoni
• [PATCH v2 1/3] ARM: mvebu: enable the SDHCI interface on Armada 385   Thomas Petazzoni
• [PATCH v2 2/3] ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the mvebu_v7_defconfig   Thomas Petazzoni
• [PATCH v2 3/3] ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the multi_v7_defconfig   Thomas Petazzoni
• [PATCH v2 0/4] ARM: mvebu: fix bus width handling in mvebu-devbus   Thomas Petazzoni
• [PATCH v2 1/4] memory: mvebu-devbus: fix the conversion of the bus width   Thomas Petazzoni
• [PATCH v2 2/4] ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree   Thomas Petazzoni
• [PATCH v2 3/4] ARM: mvebu: fix NOR bus-width in Armada XP DB Device Tree   Thomas Petazzoni
• [PATCH v2 4/4] ARM: mvebu: fix NOR bus-width in Armada XP OpenBlocks AX3 Device Tree   Thomas Petazzoni
• [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x   Thomas Petazzoni
• [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x   Thomas Petazzoni
• [PATCH 0/3] ARM: implement workaround for Cortex-A9/PL310/PCIe deadlock   Thomas Petazzoni
• [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x   Thomas Petazzoni
• [PATCH 0/3] net: mvneta: fix usage as a module, and support QSGMII properly   Thomas Petazzoni
• [PATCH 1/3] net: phy: add minimal support for QSGMII PHY   Thomas Petazzoni
• [PATCH 2/3] net: mvneta: properly configure the MAC <-> PHY connection in all situations   Thomas Petazzoni
• [PATCH 3/3] ARM: mvebu: use qsgmii phy-mode for Armada XP GP interfaces   Thomas Petazzoni
• [PATCHv3 0/5] Support for Marvell AHCI interface on Armada 38x   Thomas Petazzoni
• [PATCHv3 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles   Thomas Petazzoni
• [PATCHv3 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces   Thomas Petazzoni
• [PATCHv3 3/5] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x   Thomas Petazzoni
• [PATCHv3 4/5] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig   Thomas Petazzoni
• [PATCHv3 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig   Thomas Petazzoni
• [PATCH 0/5] fixing regressions caused by Dove in MULTI_V7   Thomas Petazzoni
• [PATCH 5/6] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Thomas Petazzoni
• [PATCH 5/6] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Thomas Petazzoni
• [PATCH 5/6] ARM: mvebu: Add thermal quirk for the Armada 375 DB board   Thomas Petazzoni
• [PATCH v2 1/4] memory: mvebu-devbus: fix the conversion of the bus width   Thomas Petazzoni
• [PATCH v2 2/4] ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree   Thomas Petazzoni
• [PATCH 0/5] ARM: mvebu: misc Device Tree fixes and updates   Thomas Petazzoni
• [PATCH 1/5] ARM: mvebu: specify I2C bus frequency on Armada 370 DB   Thomas Petazzoni
• [PATCH 2/5] ARM: mvebu: enable the SATA interface on Armada 375 DB   Thomas Petazzoni
• [PATCH 3/5] ARM: mvebu: use clocks property for serial ports   Thomas Petazzoni
• [PATCH 4/5] ARM: mvebu: remove clock-frequency of serial port Device Tree nodes   Thomas Petazzoni
• [PATCH 5/5] ARM: mvebu: don't use clocks property in UART node for Netgear RN2120   Thomas Petazzoni
• [PATCH 0/7] Fixes for Armada 370/XP PCIe   Thomas Petazzoni
• [PATCH 0/7] Fixes for Armada 370/XP PCIe   Thomas Petazzoni
• [PATCH 1/7] irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable   Thomas Petazzoni
• [PATCH 2/7] irqchip: armada-370-xp: implement the ->check_device() msi_chip operation   Thomas Petazzoni
• [PATCH 3/7] irqchip: armada-370-xp: Fix releasing of MSIs   Thomas Petazzoni
• [PATCH 4/7] pci: mvebu: fix off-by-one in the computed size of the mbus windows   Thomas Petazzoni
• [PATCH 5/7] bus: mvebu-mbus: Avoid setting an undefined window size   Thomas Petazzoni
• [PATCH 6/7] bus: mvebu-mbus: allow several windows with the same target/attribute   Thomas Petazzoni
• [PATCH 7/7] pci: pci-mvebu: split PCIe BARs into multiple MBus windows when needed   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• Fixing PCIe issues on Armada XP   Thomas Petazzoni
• [PATCH 14/29] ARM: orion: switch to a per-platform handle_irq() function   Thomas Petazzoni
• [PATCH 17/29] ARM: orion5x: update I2C description at SoC level   Thomas Petazzoni
• [PATCH 26/29] ARM: orion5x: convert RD-88F5182 to Device Tree   Thomas Petazzoni
• [PATCH 14/29] ARM: orion: switch to a per-platform handle_irq() function   Thomas Petazzoni
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: remove unnecessary ifdef around l2x0_of_init   Thomas Petazzoni
• [PATCH 2/2] ARM: mvebu: fix the name of the parameter used in mvebu_get_soc_id   Thomas Petazzoni
• [PATCH 02/29] pinctrl: mvebu: new driver for Orion platforms   Thomas Petazzoni
• [PATCH 0/7] Fixes for Armada 370/XP PCIe   Thomas Petazzoni
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Thomas Petazzoni
• [PATCH 0/3] net: mvneta: fix usage as a module, and support QSGMII properly   Thomas Petazzoni
• [PATCH 0/5] fixing regressions caused by Dove in MULTI_V7   Thomas Petazzoni
• [PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform   Thomas Petazzoni
• [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q   Thomas Petazzoni
• [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q   Thomas Petazzoni
• [PATCH v2 00/38] ARM: orion5x: big step towards DT conversion   Thomas Petazzoni
• [PATCH v2 01/38] ARM: orion5x: fix target ID for crypto SRAM window   Thomas Petazzoni
• [PATCH v2 02/38] memory: mvebu-devbus: fix the conversion of the bus width   Thomas Petazzoni
• [PATCH v2 03/38] pinctrl: mvebu: new driver for Orion platforms   Thomas Petazzoni
• [PATCH v2 04/38] clk: mvebu: add Orion5x clock driver   Thomas Petazzoni
• [PATCH v2 05/38] memory: mvebu-devbus: use ARMADA_ prefix in defines   Thomas Petazzoni
• [PATCH v2 06/38] memory: mvebu-devbus: use _SHIFT suffixes instead of _BIT   Thomas Petazzoni
• [PATCH v2 07/38] memory: mvebu-devbus: split functions   Thomas Petazzoni
• [PATCH v2 08/38] memory: mvebu-devbus: add Orion5x support   Thomas Petazzoni
• [PATCH v2 09/38] memory: mvebu-devbus: add a devbus, keep-config property   Thomas Petazzoni
• [PATCH v2 10/38] ARM: orion5x: move interrupt controller node into ocp   Thomas Petazzoni
• [PATCH v2 11/38] ARM: orion5x: switch to preprocessor includes in DT   Thomas Petazzoni
• [PATCH v2 12/38] ARM: orion5x: use existing dt-bindings include for Device Tree files   Thomas Petazzoni
• [PATCH v2 13/38] ARM: orion5x: convert DT to use the mvebu-mbus driver   Thomas Petazzoni
• [PATCH v2 14/38] ARM: orion5x: add node labels in Orion5x SoC Device Tree file   Thomas Petazzoni
• [PATCH v2 15/38] ARM: orion5x: use gpio-keys and gpio-leds instead of gpio_keys/gpio_leds in edmini_v2   Thomas Petazzoni
• [PATCH v2 16/38] ARM: orion5x: add linux,stdout-path to edmini_v2   Thomas Petazzoni
• [PATCH v2 17/38] ARM: orion5x: use node labels for UART and SATA on edmini_v2   Thomas Petazzoni
• [PATCH v2 18/38] ARM: orion5x: rename XOR node to dma-controller@<address>   Thomas Petazzoni
• [PATCH v2 19/38] ARM: orion5x: add interrupt for Ethernet in Device Tree   Thomas Petazzoni
• [PATCH v2 20/38] ARM: orion5x: switch to use the clock driver for DT platforms   Thomas Petazzoni
• [PATCH v2 21/38] ARM: orion5x: convert to use 'clocks' property for UART controllers   Thomas Petazzoni
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Thomas Petazzoni
• [PATCH v2 23/38] ARM: orion5x: switch to DT interrupts and timer   Thomas Petazzoni
• [PATCH v2 24/38] ARM: orion5x: enable pinctrl driver at SoC level   Thomas Petazzoni
• [PATCH v2 25/38] ARM: orion5x: update I2C description at SoC level   Thomas Petazzoni
• [PATCH v2 26/38] ARM: orion5x: add Device Bus description at SoC level   Thomas Petazzoni
• [PATCH v2 27/38] ARM: orion5x: add standard pinctrl configs for sata0 and sata1   Thomas Petazzoni
• [PATCH v2 28/38] ARM: orion5x: convert edmini_v2 to DT pinctrl   Thomas Petazzoni
• [PATCH v2 29/38] ARM: orion5x: use DT to describe I2C devices on edmini_v2   Thomas Petazzoni
• [PATCH v2 30/38] ARM: orion5x: use DT to describe EHCI on edmini_v2   Thomas Petazzoni
• [PATCH v2 31/38] ARM: orion5x: use DT to describe NOR on edmini_v2   Thomas Petazzoni
• [PATCH v2 32/38] ARM: orion5x: keep TODO list in edmini_v2 DT   Thomas Petazzoni
• [PATCH v2 33/38] ARM: orion5x: remove unneeded code for edmini_v2   Thomas Petazzoni
• [PATCH v2 34/38] ARM: orion5x: convert RD-88F5182 to Device Tree   Thomas Petazzoni
• [PATCH v2 35/38] ARM: orion5x: convert d2net to Device Tree   Thomas Petazzoni
• [PATCH v2 36/38] ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree   Thomas Petazzoni
• [PATCH v2 37/38] ARM: orion: remove no longer needed DT IRQ code   Thomas Petazzoni
• [PATCH v2 38/38] ARM: orion: remove no longer needed gpio DT code   Thomas Petazzoni
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Thomas Petazzoni
• [PATCH v2 17/38] ARM: orion5x: use node labels for UART and SATA on edmini_v2   Thomas Petazzoni
• [PATCH v2 00/38] ARM: orion5x: big step towards DT conversion   Thomas Petazzoni
• [PATCH v2 17/38] ARM: orion5x: use node labels for UART and SATA on edmini_v2   Thomas Petazzoni
• [PATCH v2 03/38] pinctrl: mvebu: new driver for Orion platforms   Thomas Petazzoni
• [PATCH v2 0/7] ARM: berlin: add pinctrl support   Thomas Petazzoni
• [PATCH v2 02/18] usb: host: xhci-plat: Add clocks support   Thomas Petazzoni
• [PATCH v2 03/18] usb: host: xhci-plat: Add support for the Armada 38x   Thomas Petazzoni
• [PATCH v2 03/18] usb: host: xhci-plat: Add support for the Armada 38x   Thomas Petazzoni
• [PATCH] ARM: mvebu: refine which files are build in mach-mvebu   Thomas Petazzoni
• [PATCH 01/15] pinctrl: sunxi: Add const qualifier to the pin descriptor   Thomas Petazzoni
• [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function   Thomas Petazzoni
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Borislav Petkov
• [PATCH v6 2/5] ARM: Add Krait L2 register accessor functions   Borislav Petkov
• [PATCH v6 2/5] ARM: Add Krait L2 register accessor functions   Borislav Petkov
• [PATCH v6 2/5] ARM: Add Krait L2 register accessor functions   Borislav Petkov
• [PATCH v6 3/5] devicetree: bindings: Document Krait cache error interrupts   Borislav Petkov
• [PATCH v6 2/5] ARM: Add Krait L2 register accessor functions   Borislav Petkov
• [PATCH v6 4/5] edac: Add support for Krait CPU cache error detection   Borislav Petkov
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Borislav Petkov
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Borislav Petkov
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Borislav Petkov
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Borislav Petkov
• [PATCH v6 4/5] edac: Add support for Krait CPU cache error detection   Borislav Petkov
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Borislav Petkov
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Borislav Petkov
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Borislav Petkov
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Borislav Petkov
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Borislav Petkov
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Borislav Petkov
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Borislav Petkov
• [PATCH v6 3/5] devicetree: bindings: Document Krait cache error interrupts   Borislav Petkov
• [PATCH] Exynos4: cpuidle: support dual CPUs with AFTR state   Lorenzo Pieralisi
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH] driver: clocksource: fix age-old arch timer C3STOP detection issue   Lorenzo Pieralisi
• [PATCH RFC v2 0/4] ARM generic idle states   Lorenzo Pieralisi
• [PATCH RFC v2 1/4] drivers: cpuidle: implement OF based idle states infrastructure   Lorenzo Pieralisi
• [PATCH RFC v2 2/4] arm64: add PSCI CPU_SUSPEND based cpu_suspend support   Lorenzo Pieralisi
• [PATCH RFC v2 3/4] drivers: cpuidle: CPU idle ARM64 driver   Lorenzo Pieralisi
• [PATCH RFC v2 4/4] arm64: boot: dts: update rtsm aemv8 dts with PSCI and idle states   Lorenzo Pieralisi
• [Patch v2 4/4] mcpm: exynos: populate suspend and powered_up callbacks   Lorenzo Pieralisi
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Lorenzo Pieralisi
• [Patch v2 2/4] driver: cpuidle: cpuidle-big-little: init driver for Exynos5420   Lorenzo Pieralisi
• [PATCH 1/4] arm64: topology: Initialise default topology state immediately   Lorenzo Pieralisi
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Lorenzo Pieralisi
• [PATCHv2 2/2] arm64: topology: add MPIDR-based detection   Lorenzo Pieralisi
• [Linaro-acpi] [PATCH v3 part1 04/11] ARM64 / ACPI: Introduce arm-core.c and its related head file   Lorenzo Pieralisi
• [Linaro-acpi] [PATCH v3 part1 06/11] ARM64 / ACPI: Introduce lowlevel suspend function   Lorenzo Pieralisi
• [PATCH v3 5/6] arm: exynos: Add MCPM call-back functions   Lorenzo Pieralisi
• [PATCH v6 3/5] devicetree: bindings: Document Krait cache error interrupts   Lorenzo Pieralisi
• [PATCH RFC v5 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH v3 5/6] arm: exynos: Add MCPM call-back functions   Lorenzo Pieralisi
• [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64   Jean Pihet
• [PATCH] arm64: fix !CONFIG_COMPAT build failures   Jean Pihet
• [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64   Jean Pihet
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Jean Pihet
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Jean Pihet
• [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64   Jean Pihet
• [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64   Jean Pihet
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Laurent Pinchart
• [PATCH RFC v3 2/2] clk: Add handling of clk parent and rate assigned from DT   Laurent Pinchart
• [PATCH RFC v2 2/6] drm/i2c: tda998x: Move tda998x to a couple encoder/connector   Laurent Pinchart
• [ARM ATTEND] Device Tree bindings stability   Laurent Pinchart
• [PATCH 0/2] ARM SMMU fixes   Laurent Pinchart
• [ARM ATTEND] DeviceTree status   Laurent Pinchart
• [PATCH] ARM: shmobile: r8a7791: Add EHCI MSTP clock   Laurent Pinchart
• [PATCH] ARM: shmobile: r8a7791: add EHCI clock DT support   Laurent Pinchart
• Porting plat-pxa to the MMP PDMA driver   Laurent Pinchart
• Porting plat-pxa to the MMP PDMA driver   Laurent Pinchart
• [PATCH] ARM: shmobile: lager: Correct setting of ethernet PHY LED mode   Laurent Pinchart
• [PATCH 0/2] ARM SMMU fixes   Laurent Pinchart
• The Alphabet (or, the sorting of Kconfig symbols)   Laurent Pinchart
• mach header files   Laurent Pinchart
• [PATCH v2] ARM: pxa: Move iotable mapping inside vmalloc region   Laurent Pinchart
• [PATCH v3 0/4] ARM: pxa: Fix out of vmalloc space bug   Laurent Pinchart
• [PATCH v3 1/4] ARM: pxa: Don't hardcode addresses and size in map_desc tables   Laurent Pinchart
• [PATCH v3 2/4] ARM: pxa: Move UNCACHED_PHYS_0 mapping from generic.c to pxa2[57]x.c   Laurent Pinchart
• [PATCH v3 3/4] ARM: pxa: pxa27x: Don't map IMEMC region statically   Laurent Pinchart
• [PATCH v3 4/4] ARM: pxa: Move iotable mapping inside vmalloc region   Laurent Pinchart
• [PATCH v2 4/5] ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi   Laurent Pinchart
• [PATCH v3 0/4] ARM: pxa: Fix out of vmalloc space bug   Laurent Pinchart
• [PATCH RFC v5 2/2] clk: Add handling of clk parent and rate assigned from DT   Laurent Pinchart
• [PATCH/RFC 0/3] Allow OHCI drivers to override hub control operations   Laurent Pinchart
• [PATCH/RFC 1/3] USB: OHCI: Export the ohci_hub_control function   Laurent Pinchart
• [PATCH/RFC 2/3] USB: ohci-pxa27x: Add support for external vbus regulators   Laurent Pinchart
• [PATCH/RFC 3/3] ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator   Laurent Pinchart
• [PATCH 0/6] dma: mmp_pdma: fly-by transfers and external DMA requests support   Laurent Pinchart
• [PATCH 1/6] dmaengine: Add fly-by transfer flag to slave configuration structure   Laurent Pinchart
• [PATCH 2/6] dma: mmp_pdma: Fix the #dma-channels DT property documentation   Laurent Pinchart
• [PATCH 3/6] dma: mmp_pdma: Simplify access to channel drcmr value   Laurent Pinchart
• [PATCH 4/6] dma: mmp_pdma: Fix physical channel memory allocation size   Laurent Pinchart
• [PATCH 5/6] dma: mmp_pdma: Add support for fly-by transfers   Laurent Pinchart
• [PATCH 6/6] dma: mmp_pdma: Add support externel DMA requests   Laurent Pinchart
• [PATCH/RFC 0/3] Allow OHCI drivers to override hub control operations   Laurent Pinchart
• [PATCH 0/2] ARM SMMU fixes   Laurent Pinchart
• [PATCH v2 0/4] Allow OHCI drivers to override hub control operations   Laurent Pinchart
• [PATCH v2 1/4] USB: OHCI: Export the ohci_hub_control function   Laurent Pinchart
• [PATCH v2 2/4] USB: EHCI: Export the ehci_hub_control function   Laurent Pinchart
• [PATCH v2 3/4] USB: ohci-pxa27x: Add support for external vbus regulators   Laurent Pinchart
• [PATCH v2 4/4] ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator   Laurent Pinchart
• [PATCH/RFC 0/3] Allow OHCI drivers to override hub control operations   Laurent Pinchart
• [PATCH v2 1/4] USB: OHCI: Export the ohci_hub_control function   Laurent Pinchart
• [PATCH v5 04/20] ARM: shmobile: r8a7779: Add clocks   Laurent Pinchart
• [PATCH v5 01/20] clk: shmobile: r8a7779: Add clocks support   Laurent Pinchart
• [PATCH v3 0/4] Allow OHCI/EHCI drivers to override more hub operations   Laurent Pinchart
• [PATCH v3 1/4] USB: OHCI: Export the OHCI hub control and status_data functions   Laurent Pinchart
• [PATCH v3 2/4] USB: EHCI: Export the ehci_hub_control function   Laurent Pinchart
• [PATCH v3 3/4] USB: ohci-pxa27x: Add support for external vbus regulators   Laurent Pinchart
• [PATCH v3 4/4] ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator   Laurent Pinchart
• [PATCH 0/2] ARM SMMU fixes   Laurent Pinchart
• [PATCH v3 3/4] USB: ohci-pxa27x: Add support for external vbus regulators   Laurent Pinchart
• [PATCH v4 0/4] Allow OHCI/EHCI drivers to override more hub operations   Laurent Pinchart
• [PATCH v4 1/4] USB: OHCI: Export the OHCI hub control and status_data functions   Laurent Pinchart
• [PATCH v4 2/4] USB: EHCI: Export the ehci_hub_control function   Laurent Pinchart
• [PATCH v4 3/4] USB: ohci-pxa27x: Add support for external vbus regulators   Laurent Pinchart
• [PATCH v4 4/4] ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator   Laurent Pinchart
• [PATCH v2 00/14] Renesas CMT, MTU2 and TMU timers DT support   Laurent Pinchart
• [PATCH v2 01/14] clocksource: sh_cmt: Drop support for legacy platform data   Laurent Pinchart
• [PATCH v2 02/14] clocksource: sh_cmt: Replace global spinlock with a per-device spinlock   Laurent Pinchart
• [PATCH v2 03/14] clocksource: sh_tmu: Drop support for legacy platform data   Laurent Pinchart
• [PATCH v2 04/14] clocksource: sh_tmu: Replace global spinlock with a per-device spinlock   Laurent Pinchart
• [PATCH v2 05/14] clocksource: sh_mtu2: Drop support for legacy platform data   Laurent Pinchart
• [PATCH v2 06/14] clocksource: sh_mtu2: Replace global spinlock with a per-device spinlock   Laurent Pinchart
• [PATCH v2 07/14] clocksource: shmobile: Remove unused sh_timer_config members   Laurent Pinchart
• [PATCH v2 08/14] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH v2 09/14] clocksource: sh_tmu: Add DT support   Laurent Pinchart
• [PATCH v2 10/14] clocksource: sh_mtu2: Add DT support   Laurent Pinchart
• [PATCH v2 11/14] ARM: shmobile: r8a7790: Add CMT devices to DT   Laurent Pinchart
• [PATCH v2 12/14] ARM: shmobile: r8a7791: Add CMT devices to DT   Laurent Pinchart
• [PATCH v2 13/14] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Laurent Pinchart
• [PATCH v2 14/14] ARM: shmobile: koelsch-reference: Enable CMT0 in device tree   Laurent Pinchart
• [PATCH] arm: dma-mapping: Fix mapping size value   Laurent Pinchart
• [PATCH] arm: dma-mapping: Fix mapping size value   Laurent Pinchart
• [PATCH 0/2] ARM: dts: Fix OMAP3 ISP functional clock configuration   Laurent Pinchart
• [PATCH 1/2] ARM: dts: use ti, fixed-factor-clock for dpll4_m5x2_mul_ck   Laurent Pinchart
• [PATCH 2/2] ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 path   Laurent Pinchart
• [PATCH] arm: dma-mapping: Fix mapping size value   Laurent Pinchart
• [PATCH 0/9] Renesas ipmmu-vmsa: Miscellaneous cleanups and fixes   Laurent Pinchart
• [PATCH 1/9] iommu/ipmmu-vmsa: Cleanup failures of ARM mapping creation or attachment   Laurent Pinchart
• [PATCH 2/9] iommu/ipmmu-vmsa: Fix the supported page sizes   Laurent Pinchart
• [PATCH 3/9] iommu/ipmmu-vmsa: Define driver-specific page directory sizes   Laurent Pinchart
• [PATCH 4/9] iommu/ipmmu-vmsa: Set the PTE contiguous hint bit when possible   Laurent Pinchart
• [PATCH 5/9] iommu/ipmmu-vmsa: PMD is never folded, PUD always is   Laurent Pinchart
• [PATCH 6/9] iommu/ipmmu-vmsa: Rewrite page table management   Laurent Pinchart
• [PATCH 7/9] iommu/ipmmu-vmsa: Support 2MB mappings   Laurent Pinchart
• [PATCH 8/9] iommu/ipmmu-vmsa: Remove stage 2 PTE bits definitions   Laurent Pinchart
• [PATCH 9/9] iommu/ipmmu-vmsa: Support clearing mappings   Laurent Pinchart
• [PATCH 3/9] iommu/ipmmu-vmsa: Define driver-specific page directory sizes   Laurent Pinchart
• [PATCH 0/9] Renesas ipmmu-vmsa: Miscellaneous cleanups and fixes   Laurent Pinchart
• [PATCH] arm: dma-mapping: Fix mapping size value   Laurent Pinchart
• [PATCHv3 19/41] OMAPDSS: panel-dpi: Add DT support   Laurent Pinchart
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Laurent Pinchart
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Laurent Pinchart
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Laurent Pinchart
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Laurent Pinchart
• [PATCH 1/4] ARM: shmobile: r8a7779: Add scif nodes to dtsi   Laurent Pinchart
• [PATCH 2/4] ARM: shmobile: marzen: Remove early_printk from command line   Laurent Pinchart
• [PATCH 3/4] ARM: shmobile: marzen: Initialise SCIF devices using DT   Laurent Pinchart
• [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices   Laurent Pinchart
• [PATCH v5 04/11] ARM: shmobile: r7s72100: add scif nodes to dtsi   Laurent Pinchart
• [PATCH/RFC] serial: sh-sci: Add device tree support for r8a7779   Laurent Pinchart
• [PATCH/RFC v2] serial: sh-sci: Add device tree support for r8a7779   Laurent Pinchart
• [PATCH/RFC 3/4] of/clk: Register clocks suitable for Runtime PM with the PM core   Laurent Pinchart
• [PATCH/RFC 3/4] of/clk: Register clocks suitable for Runtime PM with the PM core   Laurent Pinchart
• [PATCH/RFC 0/4] of: Register clocks for Runtime PM with PM core   Laurent Pinchart
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Andrew Pinski
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Andrew Pinski
• OMAP baseline test results for v3.14   Paolo Pisati
• [PATCH V3 15/17] ARM: exynos: cpuidle: Disable cpuidle for 5440   Nicolas Pitre
• Big endian working?   Nicolas Pitre
• [PATCH v3 0/4] ARM: pxa: Fix out of vmalloc space bug   Nicolas Pitre
• [PATCH] ARM: zImage: ensure header in LE format for BE8 kernels   Nicolas Pitre
• [PATCH v3 0/4] ARM: pxa: Fix out of vmalloc space bug   Nicolas Pitre
• [PATCH v2 06/12] ARM: mcpm: change max clusters to 4   Nicolas Pitre
• [PATCH 1/5] ARM: bL_switcher: Don't enable bL switcher on systems without CCI   Nicolas Pitre
• [PATCH 2/5] drivers/bus: arm-cci: Add common control interface for ACE ports   Nicolas Pitre
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• commit b3a977b224 {ARM: Better virt_to_page() handling} breaks Keystone boot   Nicolas Pitre
• commit b3a977b224 {ARM: Better virt_to_page() handling} breaks Keystone boot   Nicolas Pitre
• [PATCH v2 1/2] ARM : DMA : remove useless information about DMA   Nicolas Pitre
• [PATCH v2 2/2] ARM : change fixmap mapping region to support 32 CPUs   Nicolas Pitre
• [PATCH v2 0/2] change ARM linux memory layout to support 32 CPUs   Nicolas Pitre
• [PATCH v2 1/2] ARM : DMA : remove useless information about DMA   Nicolas Pitre
• [PATCH v2 1/2] ARM : DMA : remove useless information about DMA   Nicolas Pitre
• [PATCH v2 1/2] ARM : DMA : remove useless information about DMA   Nicolas Pitre
• [PATCH v2 2/2] ARM : change fixmap mapping region to support 32 CPUs   Nicolas Pitre
• [PATCH 1/1] arm/mach-vexpress: array accessed out of bounds   Nicolas Pitre
• [PATCH v2 2/2] ARM : change fixmap mapping region to support 32 CPUs   Nicolas Pitre
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• [PATCH] ARM: fix do_div() bug in big-endian systems   Nicolas Pitre
• [PATCH] ARM: fix do_div() bug in big-endian systems   Nicolas Pitre
• [PATCH v2 06/12] ARM: mcpm: change max clusters to 4   Nicolas Pitre
• [PATCH v3 2/2] ARM : change fixmap mapping region to support 32 CPUs   Nicolas Pitre
• Change of TEXT_OFFSET for multi_v7_defconfig   Nicolas Pitre
• [PATCH 1/5] ARM: bL_switcher: Don't enable bL switcher on systems without CCI   Nicolas Pitre
• Change of TEXT_OFFSET for multi_v7_defconfig   Nicolas Pitre
• [PATCH] mcpm: Rename the power_down_finish() functions to be less confusing   Nicolas Pitre
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• Change of TEXT_OFFSET for multi_v7_defconfig   Nicolas Pitre
• Change of TEXT_OFFSET for multi_v7_defconfig   Nicolas Pitre
• [PATCH] ARM: fix big endian __pv_phys_pfn_offset size related issue   Nicolas Pitre
• Change of TEXT_OFFSET for multi_v7_defconfig   Nicolas Pitre
• [PATCH 1/5] ARM: bL_switcher: Don't enable bL switcher on systems without CCI   Nicolas Pitre
• [PATCH 5/5] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• [PATCH v3 06/13] ARM: mcpm: support 4 clusters in HiP04   Nicolas Pitre
• [PATCH v3 07/13] ARM: hisi: add hip04 SoC support   Nicolas Pitre
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• Change of TEXT_OFFSET for multi_v7_defconfig   Nicolas Pitre
• [PATCH] ARM: EXYNOS: cpu hotplug: use v7_exit_coherency_flush macro for cache disabling   Nicolas Pitre
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• [PATCH v2 2/3] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• [PATCH v3 0/2] change ARM linux memory layout to support 32 CPUs   Nicolas Pitre
• [PATCH v3 5/6] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• [PATCH v3 5/6] arm: exynos: Add MCPM call-back functions   Nicolas Pitre
• [PATCH v3 6/6] arm: exynos: Add /dev/bL_status user interface on Exynos5420   Nicolas Pitre
• [PATCH 0/5] AM437x: HDQ/1wire protocol   Sourav Poddar
• [PATCH 1/5] drivers: w1: omap_hdq: cleanup and bug fixes.   Sourav Poddar
• [PATCH 2/5] w1: omap_hdq: Add compatible property for omap hdq driver.   Sourav Poddar
• [PATCH 3/5] arm: omap2: skip device build from platform code for dt.   Sourav Poddar
• [PATCH 4/5] arm: dts: am4372: Add hdq device tree data.   Sourav Poddar
• [PATCH 5/5] arm: hwmod: am437x: Add hwmod data for hdq1w.   Sourav Poddar
• [PATCH] arm: dts: am43x-clock: add tbclk data for ehrpwm.   Sourav Poddar
• [PATCH] arm: dts: am33xx-clock: Fix ehrpwm tbclk data.   Sourav Poddar
• [PATCH] arm: dts: am43x-clock: add tbclk data for ehrpwm.   Sourav Poddar
• [ARM ATTEND] DT review process and standardization and ARM64 upstreaming   Matt Porter
• [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver   Matt Porter
• [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver   Matt Porter
• [PATCH v3 2/3] Update bcm_defconfig with new pinctrl CONFIG   Matt Porter
• [PATCH v3 1/3] pinctrl: Rename Broadcom Capri pinctrl driver   Matt Porter
• [PATCH 0/4] Support additional regulators on BCM590xx   Matt Porter
• [PATCH 1/4] mfd: bcm590xx: update binding with additional BCM59056 regulators   Matt Porter
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Matt Porter
• [PATCH 3/4] regulator: bcm590xx: add support for regulators on secondary i2c slave   Matt Porter
• [PATCH 4/4] ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators   Matt Porter
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Matt Porter
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Matt Porter
• [PATCH RESEND 4/5] ARM: BCM63XX: add BCM963138DVT Reference platform DTS   Matt Porter
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Matt Porter
• [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space   Matt Porter
• [PATCH v2 0/4] Support additional regulators on BCM590xx   Matt Porter
• [PATCH v2 1/4] mfd: bcm590xx: update binding with additional BCM59056 regulators   Matt Porter
• [PATCH v2 2/4] mfd: bcm590xx: add support for secondary I2C slave address   Matt Porter
• [PATCH v2 3/4] regulator: bcm590xx: add support for regulators on secondary I2C slave   Matt Porter
• [PATCH v2 4/4] ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators   Matt Porter
• [PATCH v4] mach-bcm: clean up config and build targets   Matt Porter
• [PATCH v2 00/10] ARM: bcm: SCM and L2 cache code cleanup   Matt Porter
• [PATCH] ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7   Matt Porter
• [PATCH V2] ARM: mach-bcm: add ARM_ERRATA_775420   Matt Porter
• [PATCH v2 RESEND 5/5] ARM: dts: use real clocks for bcm21664   Matt Porter
• [PATCH v2 RESEND 0/5] clk: bcm21664: add common clock support   Matt Porter
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Matt Porter
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Matt Porter
• [PATCH v2 2/4] mfd: bcm590xx: add support for secondary I2C slave address   Matt Porter
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Matt Porter
• [PATCH v6 RESEND 0/5] Add Broadcom Kona PWM Support   Matt Porter
• [PATCH 08/16] ARM: l2c: convert prima2 to generic l2c initialisation   Matt Porter
• [PATCH] arm64: debug: remove noisy, pointless warning   Sandeepa Prabhu
• [PATCH v7 0/3] Add support for PCI in AArch64   Sandeepa Prabhu
• [PATCH v7 0/3] Add support for PCI in AArch64   Sandeepa Prabhu
• [PATCH v7 0/3] Add support for PCI in AArch64   Sandeepa Prabhu
• [RFC 1/5] mtd:fsl_nfc: Nand flash controller for VF610, MPC5125, etc.   Bill Pringlemeir
• [RFC 1/5] mtd:fsl_nfc: Nand flash controller for VF610, MPC5125, etc.   Bill Pringlemeir
• [PATCH v7 1/2] can: xilinx CAN controller support   Appana Durga Kedareswara Rao
• [PATCH v7 1/2] can: xilinx CAN controller support   Appana Durga Kedareswara Rao
• [PATCH v7 1/2] can: xilinx CAN controller support   Appana Durga Kedareswara Rao
• [PATCH v7 1/2] can: xilinx CAN controller support   Appana Durga Kedareswara Rao
• [PATCH v7 1/2] can: xilinx CAN controller support   Appana Durga Kedareswara Rao
• [PATCH] ARM: ux500: Staticise ux500_soc_attr   Thierry Reding
• [RFC 0/5] PCI: tegra: Overhaul regulator usage   Thierry Reding
• [RFC 1/5] PCI: tegra: Overhaul regulator usage   Thierry Reding
• [RFC 2/5] ARM: tegra: Add new PCIe regulator properties   Thierry Reding
• [RFC 3/5] PCI: tegra: Implement accurate power supply scheme   Thierry Reding
• [RFC 4/5] PCI: tegra: Remove deprecated power supply properties   Thierry Reding
• [RFC 5/5] ARM: tegra: Remove legacy PCIe power supply properties   Thierry Reding
• [PATCH 08/16] backlight: pwm_bl: set pwm polarity when using platform data   Thierry Reding
• [PATCH 09/16] avr32/at32ap: switch to the generic PWM framework   Thierry Reding
• [RFC 1/5] PCI: tegra: Overhaul regulator usage   Thierry Reding
• [RFC 2/5] ARM: tegra: Add new PCIe regulator properties   Thierry Reding
• [RFC 3/5] PCI: tegra: Implement accurate power supply scheme   Thierry Reding
• [PATCH] pwm: mxs: set pwm_chip can_sleep flag   Thierry Reding
• [PATCH v12][ 09/12] drm/panel: Add Eukrea mbimxsd51 displays.   Thierry Reding
• [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)   Thierry Reding
• [PATCH 1/4] drm/fb-helper: Fix hpd vs. initial config races   Thierry Reding
• [PATCH 2/4] drm: Constify struct drm_fb_helper_funcs   Thierry Reding
• [PATCH 3/4] drm: Introduce drm_fb_helper_prepare()   Thierry Reding
• [PATCH 4/4] drm/tegra: Implement race-free hotplug detection   Thierry Reding
• [PATCH 3/4] drm: Introduce drm_fb_helper_prepare()   Thierry Reding
• [PATCH 3/4] drm: Introduce drm_fb_helper_prepare()   Thierry Reding
• [PATCH 2/2] of/irq: do irq resolution in platform_get_irq   Thierry Reding
• [PATCH 000/222] The *Full* Cubox-i series   Thierry Reding
• [PATCH 000/222] The *Full* Cubox-i series   Thierry Reding
• [PATCH 0/7] ARM: tegra: HDMI and DSI updates   Thierry Reding
• [PATCH 1/7] ARM: tegra: Add Tegra124 HDMI support   Thierry Reding
• [PATCH 2/7] ARM: tegra: venice2 - Enable HDMI   Thierry Reding
• [PATCH 3/7] ARM: tegra: jetson-tk1 - Enable HDMI support   Thierry Reding
• [PATCH 4/7] ARM: tegra: harmony - Add +5V HDMI supply   Thierry Reding
• [PATCH 5/7] ARM: tegra: beaver - Add +5V HDMI supply   Thierry Reding
• [PATCH 6/7] ARM: tegra: dalmore - Add +5V HDMI supply   Thierry Reding
• [PATCH 7/7] ARM: tegra: dalmore - Add DSI power supply   Thierry Reding
• [PATCH] ARM: tegra: use correct audio CODEC on Jetson TK1   Thierry Reding
• [PATCH RFC 6/8] component: remove old add_components method   Thierry Reding
• [PATCH RFC 7/8] component: move check for unbound master into try_to_bring_up_masters()   Thierry Reding
• [PATCH RFC 3/8] component: add support for component match array   Thierry Reding
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Thierry Reding
• [PATCH RFC 6/8] component: remove old add_components method   Thierry Reding
• [PATCH v6 RESEND 0/5] Add Broadcom Kona PWM Support   Thierry Reding
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Thierry Reding
• [PATCH v12 11/31] documentation: iommu: add binding document of Exynos System MMU   Thierry Reding
• [PATCH] ARM: tegra: add SD wp-gpios to Venice2 DT   Thierry Reding
• [PATCH] ARM: tegra: add SD wp-gpios to Jetson TK1 DT   Thierry Reding
• [PATCH] ARM: tegra: add SD wp-gpios to Dalmore DT   Thierry Reding
• [PATCH] ARM: OMAP2+: Add support for RNG on DT booted N900   Sebastian Reichel
• [PATCH 00/11] Fixes for omap PM for making omap3 DT only   Sebastian Reichel
• [PATCH v5] ARM: sun4i: spi: Allow transfers larger than FIFO size   Maxime Ripard
• [PATCH v5 0/7] Add support for the Allwinner A31 DMA Controller   Maxime Ripard
• [PATCH 01/15] ARM: sunxi: dt: list all pinctrl compatible strings   Maxime Ripard
• [PATCH 02/15] ARM: sunxi: dt: document pinctrl clock related properties   Maxime Ripard
• [PATCH 05/15] clk: sunxi: add A31 APB0 clk gate defintions   Maxime Ripard
• [PATCH 06/15] clk: sunxi: add A31 APB0 gates compatible string to the documentation   Maxime Ripard
• [PATCH 07/15] ARM: sunxi: dt: define A31's APB0 clk gates node   Maxime Ripard
• [PATCH 00/15] ARM: sunxi: add A31 PL pins support   Maxime Ripard
• [PATCH 12/15] pinctrl: sunxi: retrieve and enable PL clk gate for A31 SoC   Maxime Ripard
• [PATCH 13/15] pinctrl: sunxi: retrieve and enable PL reset line for A31 SoC   Maxime Ripard
• [PATCH 14/15] pinctrl: sunxi: define A31 PL0/PL1 pins   Maxime Ripard
• [PATCH 00/15] ARM: sunxi: add A31 PL pins support   Maxime Ripard
• [PATCH 00/15] ARM: sunxi: add A31 PL pins support   Maxime Ripard
• [PATCH 00/15] ARM: sunxi: add A31 PL pins support   Maxime Ripard
• [PATCH v2 1/5] pinctrl: sunxi: add PL and PM pin definitions   Maxime Ripard
• [PATCH v2 2/5] pinctrl: sunxi: support multiple pin controller   Maxime Ripard
• [PATCH v2 3/5] pinctrl: sunxi: define A31 R_PIO pin functions   Maxime Ripard
• [PATCH v2 4/5] pinctrl: sunxi: add reset control support   Maxime Ripard
• [PATCH v2 5/5] ARM: sunxi: update the default ARCH_NR_GPIO for sunxi arch   Maxime Ripard
• [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards   Maxime Ripard
• [PATCH v3 1/7] pinctrl: sunxi: check clk_prepare_enable return value   Maxime Ripard
• [PATCH v3 2/7] pinctrl: sunxi: disable clk when failing to probe pin controller   Maxime Ripard
• [PATCH v3 6/7] pinctrl: sunxi: add reset control support   Maxime Ripard
• [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards   Maxime Ripard
• [PATCH 0/4] ARM: sunxi: dt: Misc. fixes   Maxime Ripard
• [PATCH 2/4] ARM: sun7i: fix PLL4 clock and add PLL8   Maxime Ripard
• [PATCHv2 2/7] pwm: sunxi: document OF bindings   Maxime Ripard
• [PATCHv2 1/7] pwm: Add Allwinner SoC support   Maxime Ripard
• [PATCH 1/7] gpiolib: gpiolib-of: Implement device tree gpio-names based lookup   Maxime Ripard
• [PATCH 3/7] net: rfkill: gpio: use clk_prepare_enable/clk_disable_unprepare   Maxime Ripard
• [PATCH 4/7] net: rfkill: gpio: fix reversed clock enable state   Maxime Ripard
• [PATCH 7/7] ARM: sun7i: cubietruck: enable bluetooth module   Maxime Ripard
• [PATCH 6/7] net: rfkill: gpio: add clock-frequency device tree property   Maxime Ripard
• [linux-sunxi] Re: [PATCH 7/7] ARM: sun7i: cubietruck: enable bluetooth module   Maxime Ripard
• [PATCH] pinctrl: sunxi: fix typo in module author address   Maxime Ripard
• [PATCH v6 0/8] Add support for the Allwinner A31 DMA Controller   Maxime Ripard
• [PATCH v6 1/8] clk: sunxi: Remove calls to clk_put   Maxime Ripard
• [PATCH v6 2/8] ARM: sunxi: Split out the various machines into separate files   Maxime Ripard
• [PATCH v6 3/8] ARM: sunxi: Move the clock protection to machine hooks   Maxime Ripard
• [PATCH v6 4/8] ARM: sun6i: Protect CPU clock   Maxime Ripard
• [PATCH v6 5/8] ARM: sun6i: Protect SDRAM gating bit   Maxime Ripard
• [PATCH v6 6/8] ARM: sun6i: Sort the NMI node by physical address   Maxime Ripard
• [PATCH v6 7/8] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Maxime Ripard
• [PATCH v6 8/8] ARM: sun6i: dt: Add A31 DMA controller to DTSI   Maxime Ripard
• [PATCH v3 0/2] ARM: sunxi: Add A31 High Speed Timer Support   Maxime Ripard
• [PATCH v3 1/2] clocksource: sun5i: Add support for reset controller   Maxime Ripard
• [PATCH v3 2/2] ARM: sun6i: a31: Add support for the High Speed Timers   Maxime Ripard
• [PATCH v4 1/2] Documentation: Add GPIO reset binding to reset binding documentation   Maxime Ripard
• [PATCH 1/2] ARM: sun7i: Add ARM PMU in A20 DTSI   Maxime Ripard
• [PATCH 2/2] ARM: sun6i: Add ARM PMU in A31 DTSI   Maxime Ripard
• [PATCH 0/5] ARM: sun6i: Switch to enable-method for SMP   Maxime Ripard
• [PATCH 1/5] Documentation: dt: bindings: Document ARM PSCI enable method   Maxime Ripard
• [PATCH 2/5] ARM: sun6i: Use CPU_METHOD_OF_DECLARE   Maxime Ripard
• [PATCH 3/5] Documentation: dt: bindings: Document Allwinner A31 enable method   Maxime Ripard
• [PATCH 4/5] ARM: sun6i: Define the A31 CPUs enable-method   Maxime Ripard
• [PATCH 5/5] ARM: sun6i: Retire the smp field in A31 machine   Maxime Ripard
• [PATCH v4 0/2] i2c: sunxi: Change compatibles pattern   Maxime Ripard
• [PATCH] ARM: sun7i: Fix i2c4 base address   Maxime Ripard
• [PATCH 2/7] gpiolib: Support purely name based gpiod lookup in device trees   Maxime Ripard
• [PATCH v8 00/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH v8 10/17] ARM: dts: sun6i: Add mmc clocks   Maxime Ripard
• [PATCH v8 07/17] ARM: dts: sun5i: Add mmc controller nodes   Maxime Ripard
• [PATCH v8 11/17] ARM: dts: sun6i: Add mmc controller nodes   Maxime Ripard
• [PATCH v8 14/17] ARM: dts: sun6i: Enable the mmc controller on the m9   Maxime Ripard
• [PATCH v8 00/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH] reset: Add of_reset_control_get to reset.h   Maxime Ripard
• [PATCH v5 7/7] ARM: sun6i: dt: Add A31 DMA controller to DTSI   Maxime Ripard
• [PATCH v6 6/8] ARM: sun6i: Sort the NMI node by physical address   Maxime Ripard
• [PATCH v6 3/8] ARM: sunxi: Move the clock protection to machine hooks   Maxime Ripard
• [PATCH v6 2/8] ARM: sunxi: Split out the various machines into separate files   Maxime Ripard
• [PATCH 0/5] ARM: sunxi: Machine code cleanup   Maxime Ripard
• [PATCH 1/5] wdt: sunxi: Move restart code to the watchdog driver   Maxime Ripard
• [PATCH 2/5] power: reset: Add Allwinner A31 reset code   Maxime Ripard
• [PATCH 3/5] ARM: sunxi: Select restart drivers   Maxime Ripard
• [PATCH 4/5] ARM: sunxi: Remove reset code from the platform   Maxime Ripard
• [PATCH 5/5] ARM: sunxi: Remove sun4i and sun7i machine definitions   Maxime Ripard
• [PATCH 34/38] mmc: add support for power-on sequencing through DT   Maxime Ripard
• [PATCH 3/5] ARM: sunxi: Select restart drivers   Maxime Ripard
• [PATCH 5/5] ARM: sunxi: Remove sun4i and sun7i machine definitions   Maxime Ripard
• [PATCH 2/2] i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support   Maxime Ripard
• [PATCH v7] Add support for the Allwinner A31 DMA Controller   Maxime Ripard
• [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Maxime Ripard
• [PATCH] ARM: sun7i: Fix i2c4 base address   Maxime Ripard
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add ARM PMU in A31 DTSI   Maxime Ripard
• [RFC 2/5] clk: berlin: add berlin clock groups DT bindings documentation   Maxime Ripard
• [PATCH 0/2] ARM: sunxi: Split Kconfig entries   Maxime Ripard
• [PATCH 1/2] ARM: sunxi: Split the various SoCs support in Kconfig   Maxime Ripard
• [PATCH 2/2] ARM: Enable the new Allwinner SoCs support options   Maxime Ripard
• [PATCH] ARM: sunxi: Enable GMAC in sunxi_defconfig   Maxime Ripard
• [PATCH 00/15] pinctrl: sunxi: Rework and cleanups   Maxime Ripard
• [PATCH 01/15] pinctrl: sunxi: Add const qualifier to the pin descriptor   Maxime Ripard
• [PATCH 02/15] pinctrl: sunxi: Drop unused structure members   Maxime Ripard
• [PATCH 05/15] pinctrl: sunxi: Switch to devm_ioremap_resource   Maxime Ripard
• [PATCH 06/15] pinctrl: sunxi: Libraryse the driver   Maxime Ripard
• [PATCH 07/15] pinctrl: sunxi: Move Allwinner A10 pinctrl driver to a driver of its own   Maxime Ripard
• [PATCH 08/15] pinctrl: sunxi: Move Allwinner A10s pinctrl driver to a driver of its own   Maxime Ripard
• [PATCH 09/15] pinctrl: sunxi: Move Allwinner A13 pinctrl driver to a driver of its own   Maxime Ripard
• [PATCH 10/15] pinctrl: sunxi: Move Allwinner A31 pinctrl driver to a driver of its own   Maxime Ripard
• [PATCH 11/15] pinctrl: sunxi: Move Allwinner A31 special pins driver to a driver of its own   Maxime Ripard
• [PATCH 12/15] pinctrl: sunxi: Move Allwinner A20 pinctrl driver to a driver of its own   Maxime Ripard
• [PATCH 13/15] pinctrl: sunxi: Introduce per-driver Kconfig options   Maxime Ripard
• [PATCH 14/15] pinctrl: sunxi: Move the reset handling functions out of the core   Maxime Ripard
• [PATCH 15/15] ARM: sunxi: Update pinctrl Kconfig options   Maxime Ripard
• [PATCHv3 3/7] ARM: sun4i: dt: add pinmux configuration for the PWM   Maxime Ripard
• [PATCHv3 1/7] pwm: Add Allwinner SoC support   Maxime Ripard
• [PATCHv3 5/7] ARM: sun7i: dt: add pinmux configuration for the PWM   Maxime Ripard
• [PATCHv3 4/7] ARM: sun4i: dt: add PWM support   Maxime Ripard
• [PATCHv3 6/7] ARM: sun7i: dt: add PWM support   Maxime Ripard
• [PATCH v9 05/17] ARM: dts: sun4i: Add pin-muxing info for the mmc0 controller   Maxime Ripard
• [PATCH v9 08/17] ARM: dts: sun5i: Add pin-muxing info for the mmc controllers   Maxime Ripard
• [PATCH v9 01/17] clk: sunxi: factors: automatic reparenting support   Maxime Ripard
• [PATCH v9 03/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH v9 10/17] ARM: dts: sun6i: Add mmc clocks   Maxime Ripard
• [PATCH v9 12/17] ARM: dts: sun6i: Add pin-muxing info for the mmc controllers   Maxime Ripard
• [linux-sunxi] [PATCH 1/2] ARM: sunxi: Split the various SoCs support in Kconfig   Maxime Ripard
• [PATCH 1/2] ARM: sunxi: Split the various SoCs support in Kconfig   Maxime Ripard
• [PATCH v2] ARM: sunxi: Split the various SoCs support in Kconfig   Maxime Ripard
• [PATCH 1/5] wdt: sunxi: Move restart code to the watchdog driver   Maxime Ripard
• [PATCH 2/5] power: reset: Add Allwinner A31 reset code   Maxime Ripard
• [PATCH 1/7] reset: sunxi: document sunxi's reset controllers bindings   Maxime Ripard
• [PATCH 2/7] reset: sunxi: allow MFD subdevices probe   Maxime Ripard
• [PATCH 3/7] mfd: add support for sun6i PRCM (Power/Reset/Clock Management) unit   Maxime Ripard
• [PATCH 4/7] mfd: sun6i-prcm: document DT bindings   Maxime Ripard
• [PATCH 5/7] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support   Maxime Ripard
• [PATCH v4 1/2] Documentation: Add GPIO reset binding to reset binding documentation   Maxime Ripard
• [PATCH 5/5] ARM: sunxi: Remove sun4i and sun7i machine definitions   Maxime Ripard
• [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Maxime Ripard
• [PATCH] watchdog: imx2_wdt: handle enabled watchdog properly   Guenter Roeck
• [PATCH] watchdog: sunxi: Fix compilation with C=2   Guenter Roeck
• [PATCH] watchdog: sunxi: Fix compilation with C=2   Guenter Roeck
• [PATCH] watchdog: sunxi: Fix compilation with C=2   Guenter Roeck
• [PATCH] watchdog: imx2_wdt: convert to watchdog core api   Guenter Roeck
• [PATCH v2] watchdog: imx2_wdt: convert to watchdog core api   Guenter Roeck
• [PATCH v3] regmap: i2c: fallback to SMBus if the adapter does not support standard I2C   Guenter Roeck
• [PATCH 1/5] wdt: sunxi: Move restart code to the watchdog driver   Guenter Roeck
• [PATCH 2/5] power: reset: Add Allwinner A31 reset code   Guenter Roeck
• [PATCH 10/10] hwmon: vexpress: Use devm helper for hwmon device registration   Guenter Roeck
• [PATCH 10/10] hwmon: vexpress: Use devm helper for hwmon device registration   Guenter Roeck
• [PATCH v2] mfd: vexpress: Convert custom func API to regmap   Guenter Roeck
• [PATCH v2] hwmon: vexpress: Use devm helper for hwmon device registration   Guenter Roeck
• [GIT PULL] iommu/arm-smmu: fixes for 3.15   Joerg Roedel
• [PATCH] Route keyboard LEDs through the generic LEDs layer.   Pali Rohár
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Steven Rostedt
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Steven Rostedt
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Steven Rostedt
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Steven Rostedt
• [PATCH] ftrace/arm: add save_stack_trace_regs() implementation   Steven Rostedt
• [PATCH] pinctrl/at91: Fix pin_to_mask   Mark Roszko
• linux-next: manual merge of the tip tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the staging tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the tree   Stephen Rothwell
• linux-next: manual merge of the mvebu tree with the arm tree   Stephen Rothwell
• [ARM ATTEND] DeviceTree   Frank Rowand
• drivers/clk/bcm/clk-bcm281xx.c breaks on GCC 4.6.4 (and earlier)   Måns Rullgård
• [PATCH 2/3] ARM: dts: document the berlin enable-method property   Mark Rutland
• [RFC] Extend zImage format to support notes   Mark Rutland
• [RFC] Extend zImage format to support notes   Mark Rutland
• [PATCH 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller   Mark Rutland
• [PATCH 2/3] dts: socfpga: Add bindings for Altera SoC SDRAM EDAC   Mark Rutland
• [PATCH v3 06/10] arm64: efi: add EFI stub   Mark Rutland
• [PATCH v2 07/12] ARM: hisi: add hip04 SoC support   Mark Rutland
• [PATCH v2 08/12] ARM: dts: add hip04-d01 dts file   Mark Rutland
• [PATCH 07/27] irqchip: Declare cortex-a7's irqchip to initialize gic from dt   Mark Rutland
• [PATCH] arm64: Fix PSCI part of booting.txt   Mark Rutland
• [PATCH v6 3/3] ARM: Check if a CPU has gone offline   Mark Rutland
• [PATCH V2] arm64: Fix PSCI part of booting.txt   Mark Rutland
• [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64   Mark Rutland
• [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64   Mark Rutland
• [PATCH v3 part1 04/11] ARM64 / ACPI: Introduce arm-core.c and its related head file   Mark Rutland
• [PATCH v3 part1 04/11] ARM64 / ACPI: Introduce arm-core.c and its related head file   Mark Rutland
• [PATCH v4 09/14] ARM: dts: add hip04-d01 dts file   Mark Rutland
• [PATCH v2 0/3] Add initial support of PMU for exynos5260   Vikas Sajjan
• [PATCH V2 0/3] Add PMU and S2R support for exynos5420   Vikas Sajjan
• [PATCHv2 3/8] ARM: EXYNOS: Add IO mapping for PMU of Exynos3250   Vikas Sajjan
• [PATCH v2 2/3] ARM: EXYNOS: Add initial support of PMU for Exynos5260   Vikas Sajjan
• [RFC PATCH 1/2] drivers: mfd: Add support of exynos-pmu driver   Vikas Sajjan
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Vikas Sajjan
• [PATCH 1/3] ARM: dts: Add PMU reg node to exynos4210   Vikas Sajjan
• [PATCH 1/3] ARM: dts: Add PMU reg node to exynos4210   Vikas Sajjan
• [PATCH 1/4] ARM: dts: exynos4: add PMU syscon node   Vikas Sajjan
• [PATCH v12 30/31] ARM: dts: add System MMU nodes of exynos5250   Vikas Sajjan
• [PATCH V2 1/3] ARM: EXYNOS5: Add PMU settings for exynos5420   Vikas Sajjan
• [PATCH V2 2/3] ARM: EXYNOS5: Support Suspend-to-RAM on EXYNOS5420   Vikas Sajjan
• [PATCH v3 11/12] ARM: EXYNOS: Add platform driver support for Exynos PMU.   Vikas Sajjan
• [PATCH] arm64: fix !CONFIG_COMPAT build failures   Mark Salter
• [PATCH v3 06/10] arm64: efi: add EFI stub   Mark Salter
• [PATCH v3 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.   Mark Salter
• [PATCH] arm: KVM: fix possible misalignment of PGDs and bounce page   Mark Salter
• [PATCH] arm64: fixmap: fix missing sub-page offset for earlyprintk   Mark Salter
• set_fiq_handler: Bad mode in data abort handler detected   Tim Sander
• set_fiq_handler: Bad mode in data abort handler detected   Tim Sander
• set_fiq_handler: Bad mode in data abort handler detected   Tim Sander
• [PATCH] ARM: AM335X: EVM: fix pinmux documentation in devicetree   Wolfram Sang
• [PATCH v3 1/2] i2c: Add driver for Cadence I2C controller   Wolfram Sang
• [PATCH v4 2/3] i2c: Add driver for Cadence I2C controller   Wolfram Sang
• [PATCH v4 1/2] i2c: add DMA support for freescale i2c driver   Wolfram Sang
• [PATCH] watchdog: imx2_wdt: handle enabled watchdog properly   Wolfram Sang
• [PATCH v4 1/2] i2c: add DMA support for freescale i2c driver   Wolfram Sang
• [PATCH v5 1/3] i2c: cadence: Document device tree bindings   Wolfram Sang
• [PATCH v5 2/3] i2c: Add driver for Cadence I2C controller   Wolfram Sang
• [PATCH] i2c: cadence: fix Kconfig dependency   Wolfram Sang
• [PATCH] i2c: cadence: fix Kconfig dependency   Wolfram Sang
• [PATCH v2 4/5] ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi   Wolfram Sang
• [PATCH v2 1/5] pinctrl: pfc: r8a7790: add i2c0 muxing   Wolfram Sang
• [PATCH v2 2/5] pinctrl: pfc: r8a7790: add mux data for IIC(B) cores   Wolfram Sang
• [PATCH 22/33] ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings   Wolfram Sang
• [PATCH] clk: shmobile: clk-mstp: change to using clock-indices   Wolfram Sang
• [PATCH v4 00/11] CCF support for Renesas r7s72100   Wolfram Sang
• [PATCH v4 01/11] ARM: shmobile: r7s72100: document MSTP clock support   Wolfram Sang
• [PATCH v4 02/11] ARM: shmobile: r7s72100: add essential clock nodes to dtsi   Wolfram Sang
• [PATCH v4 03/11] ARM: shmobile: r7s72100: genmai: populate nodes for external clocks   Wolfram Sang
• [PATCH v4 04/11] ARM: shmobile: r7s72100: add scif nodes to dtsi   Wolfram Sang
• [PATCH v4 05/11] ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console   Wolfram Sang
• [PATCH v4 06/11] ARM: shmobile: r7s72100: genmai: platform scif devices only for legacy support   Wolfram Sang
• [PATCH v4 07/11] ARM: shmobile: r7s72100: add i2c clocks to dtsi   Wolfram Sang
• [PATCH v4 08/11] ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support   Wolfram Sang
• [PATCH v4 09/11] ARM: shmobile: r7s72100: add spi clocks to dtsi   Wolfram Sang
• [PATCH v4 10/11] ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support   Wolfram Sang
• [PATCH v4 11/11] ARM: shmobile: r7s72100: use workaround for non DT-clocks   Wolfram Sang
• [PATCH v4 05/11] ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console   Wolfram Sang
• [PATCH v4 05/11] ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console   Wolfram Sang
• [PATCH v4 00/11] CCF support for Renesas r7s72100   Wolfram Sang
• [PATCH v5 01/11] ARM: shmobile: r7s72100: document MSTP clock support   Wolfram Sang
• [PATCH v5 02/11] ARM: shmobile: r7s72100: add essential clock nodes to dtsi   Wolfram Sang
• [PATCH v5 03/11] ARM: shmobile: r7s72100: genmai: populate nodes for external clocks   Wolfram Sang
• [PATCH v5 04/11] ARM: shmobile: r7s72100: add scif nodes to dtsi   Wolfram Sang
• [PATCH v5 05/11] ARM: shmobile: r7s72100: genmai: add uart alias and activate scif2 as console   Wolfram Sang
• [PATCH v5 06/11] ARM: shmobile: r7s72100: genmai: platform scif devices only for legacy support   Wolfram Sang
• [PATCH v5 07/11] ARM: shmobile: r7s72100: add i2c clocks to dtsi   Wolfram Sang
• [PATCH v5 08/11] ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support   Wolfram Sang
• [PATCH v5 09/11] ARM: shmobile: r7s72100: add spi clocks to dtsi   Wolfram Sang
• [PATCH v5 10/11] ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support   Wolfram Sang
• [PATCH v5 11/11] ARM: shmobile: r7s72100: use workaround for non DT-clocks   Wolfram Sang
• [PATCH v2 07/12] scsi/NCR5380: adopt NCR5380_dprint() and NCR5380_dprint_phase()   Michael Schmitz
• [PATCH v2 08/12] scsi/NCR5380: adopt dprintk()   Michael Schmitz
• [PATCH v2 10/12] scsi/NCR5380: remove unused macro definitions   Michael Schmitz
• [PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure   Michael Schmitz
• [PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure   Michael Schmitz
• [PATCH RFC v4 2/2] clk: Add handling of clk parent and rate assigned from DT   Peter De Schrijver
• [PATCH 2/3] clk: tegra: remove non-existent clocks   Peter De Schrijver
• [PATCH] ARM: tegra: define Jetson TK1 regulators   Peter De Schrijver
• pull request for Tegra PLLE fixes   Peter De Schrijver
• [PATCH 54/97] ARM: l2c: tegra: remove associativity and way size from aux_ctrl   Peter De Schrijver
• [PATCH 1/1] arm/mach-vexpress: array accessed out of bounds   Heinrich Schuchardt
• Rockchip RK3188 I2C driver   Max Schwarz
• Rockchip RK3188 I2C driver   Max Schwarz
• Rockchip RK3188 I2C driver   Max Schwarz
• Rockchip RK3188 I2C driver   Max Schwarz
• [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Robert Schwebel
• [PATCH 2/2] arm: socfpga: Add support for Altera SoC SDRAM controller   Thor Thayer - Sendmail
• [PATCH 1/2] dts: socfpga: Add bindings for Altera SoC SDRAM controller   Thor Thayer - Sendmail
• [PATCH 1/2] dts: socfpga: Add bindings for Altera SoC SDRAM controller   Thor Thayer - Sendmail
• [PATCH v6 0/3] exynos: arch: add support for exynos5260 SoC   Rahul Sharma
• [PATCH v6 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH v6 2/3] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH v6 3/3] ARM: dts: add dts files for xyref5260 board   Rahul Sharma
• [PATCH v7 0/3] exynos: arch: add support for exynos5260 SoC   Rahul Sharma
• [PATCH v7 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH v7 2/3] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH v7 3/3] ARM: dts: add dts files for xyref5260 board   Rahul Sharma
• [PATCH v7 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH v8 0/3] exynos: arch: add support for exynos5260 SoC   Rahul Sharma
• [PATCH v8 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH v8 2/3] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH v8 3/3] ARM: dts: add dts files for xyref5260 board   Rahul Sharma
• [PATCH 0/2] phy: samsung: add exynos5 SoCs for as simple phy providers   Rahul Sharma
• [PATCH 1/2] phy: samsung: add simple phys for exynos5250 SoC   Rahul Sharma
• [PATCH 2/2] phy: samsung: add simple phys for exynos5420 SoC   Rahul Sharma
• [PATCH 0/7] ARM: dts: enable hdmi for exynos5 based peach and snow boards   Rahul Sharma
• [PATCH 1/7] ARM: dtsi: add node for simple phy provider for exynos5250   Rahul Sharma
• [PATCH 2/7] ARM: dtsi: add node for simple phy provider for exynos5420   Rahul Sharma
• [PATCH 3/7] ARM: dtsi: add access to simple hdmiphy to exynos5250 hdmi node   Rahul Sharma
• [PATCH 4/7] ARM: dtsi: add access to simple hdmiphy to exynos5420 hdmi node   Rahul Sharma
• [PATCH 5/7] ARM: dts: enable hdmi for exynos5250 based snow board   Rahul Sharma
• [PATCH 6/7] ARM: dts: change to correct compatible string for exynos5420 hdmi   Rahul Sharma
• [PATCH 7/7] ARM: dts: enable hdmi for exynos5420 based peach-pit board   Rahul Sharma
• [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards   Rahul Sharma
• [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420   Rahul Sharma
• [PATCH 2/5] ARM: dts: enable fimd for exynos5250 based snow board   Rahul Sharma
• [PATCH 3/5] ARM: dts: enable dp-controller for exynos5250 based snow board   Rahul Sharma
• [PATCH 4/5] ARM: dts: enable fimd for exynos5420 based peach-pit board   Rahul Sharma
• [PATCH 5/5] ARM: dts: enable dp-controller for exynos5420 based peach-pit board   Rahul Sharma
• [PATCH 1/2] phy: samsung: add simple phys for exynos5250 SoC   Rahul Sharma
• [PATCH 1/2] phy: samsung: add simple phys for exynos5250 SoC   Rahul Sharma
• [PATCH v8 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH v6 0/2] clk: exynos: add support for exynos5260 SoC   Rahul Sharma
• [PATCH v8 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH] ARM: at91: fix spi cs on sama5d3 Xplained board   Bo Shen
• Device tree support for Atmel AC97 controller on AT91SAM9263   Bo Shen
• [PATCH v1] dma: imx-sdma: add support for sdma memory copy   Shevchenko, Andriy
• [PATCH v1] dma: imx-sdma: add support for sdma memory copy   Shevchenko, Andriy
• [PATCH v1] dma: imx-sdma: add support for sdma memory copy   Andy Shevchenko
• do_undefinstr call sem down_read?   Alex Shi
• do_undefinstr call sem down_read?   Alex Shi
• do_undefinstr call sem down_read?   Alex Shi
• [PATCH v5 0/8] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework   Huang Shijie
• [PATCH v5 3/8] mtd: spi-nor: add the framework for SPI NOR   Huang Shijie
• Wrong SPI NOR model detected by mx6sl   Huang Shijie
• [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework   Huang Shijie
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Huang Shijie
• [PATCH v1 0/7] mtd: spi-nor: Add the DDR quad read support   Huang Shijie
• [PATCH v1 1/7] mtd: spi-nor: fix the wrong dummy value   Huang Shijie
• [PATCH v1 2/7] mtd: spi-nor: add DDR quad read support   Huang Shijie
• [PATCH v1 3/7] Documentation: mtd: add a new document for SPI NOR flash   Huang Shijie
• [PATCH v1 4/7] Documentation: fsl-quadspi: update the document   Huang Shijie
• [PATCH v1 5/7] mtd: fsl-quadspi: get the dummy cycles for DDR Quad read from the DT property   Huang Shijie
• [PATCH v1 6/7] mtd: fsl-quadspi: use the information stored in spi-nor{}   Huang Shijie
• [PATCH v1 7/7] mtd: fsl-quadspi: add the DDR quad read support   Huang Shijie
• [PATCH v1 1/7] mtd: spi-nor: fix the wrong dummy value   Huang Shijie
• [PATCH v1 2/7] mtd: spi-nor: add DDR quad read support   Huang Shijie
• [PATCH v1 5/7] mtd: fsl-quadspi: get the dummy cycles for DDR Quad read from the DT property   Huang Shijie
• [PATCH v1 2/7] mtd: spi-nor: add DDR quad read support   Huang Shijie
• [PATCH v1 5/7] mtd: fsl-quadspi: get the dummy cycles for DDR Quad read from the DT property   Huang Shijie
• [PATCH v2 00/10] mtd: spi-nor: Add the DDR quad read support   Huang Shijie
• [PATCH v2 01/10] mtd: spi-nor: fix the wrong dummy value   Huang Shijie
• [PATCH v2 02/10] mtd: spi-nor: add a new field for spi_nor{}   Huang Shijie
• [PATCH v2 03/10] mtd: spi-nor: add DDR quad read support   Huang Shijie
• [PATCH v2 04/10] Documentation: mtd: add a new document for SPI NOR flash   Huang Shijie
• [PATCH v2 05/10] Documentation: fsl-quadspi: update the document   Huang Shijie
• [PATCH v2 06/10] mtd: fsl-quadspi: use the information stored in spi-nor{}   Huang Shijie
• [PATCH v2 07/10] mtd: fsl-quadspi: add the DDR quad read support for Spansion NOR   Huang Shijie
• [PATCH v2 08/10] mtd: spi-nor: add more read transfer flags for n25q256a   Huang Shijie
• [PATCH v2 09/10] mtd: spi-nor: add DDR quad read support for Micron   Huang Shijie
• [PATCH v2 10/10] mtd: fsl-quadspi: add DDR quad read support for Micron   Huang Shijie
• [PATCH v2 02/10] mtd: spi-nor: add a new field for spi_nor{}   Huang Shijie
• [PATCH v2 02/10] mtd: spi-nor: add a new field for spi_nor{}   Huang Shijie
• [PATCH 1/5] ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)   Huang Shijie
• [PATCH][next] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY   Santosh Shilimkar
• [PATCH][next] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY   Santosh Shilimkar
• [PATCH] ARM: dts: keystone: add cell's information to i2c nodes   Santosh Shilimkar
• [PATCH v2 0/2] ARM: dts: keystone: i2c updates   Santosh Shilimkar
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Santosh Shilimkar
• [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support   Santosh Shilimkar
• [PATCH 1/5] gpio: omap: convert to use irq_domain_add_simple()   Santosh Shilimkar
• [PATCH 2/5] gpio: omap: check gpiochip_add() return value   Santosh Shilimkar
• [PATCH 3/5] gpio: omap: add a GPIO_OMAP option instead of using ARCH_OMAP   Santosh Shilimkar
• [PATCH 4/5] gpio: omap: convert driver to use gpiolib irqchip   Santosh Shilimkar
• commit b3a977b224 {ARM: Better virt_to_page() handling} breaks Keystone boot   Santosh Shilimkar
• commit b3a977b224 {ARM: Better virt_to_page() handling} breaks Keystone boot   Santosh Shilimkar
• commit b3a977b224 {ARM: Better virt_to_page() handling} breaks Keystone boot   Santosh Shilimkar
• [PATCH v2] mtd: davinci-nand: disable subpage write for keystone-nand   Santosh Shilimkar
• [PATCH V2 01/19] bus: omap_l3_noc: Fix copyright information   Santosh Shilimkar
• [PATCH V2 02/19] bus: omap_l3_noc: rename functions and data to omap_l3   Santosh Shilimkar
• [PATCH V2 03/19] bus: omap_l3_noc: remove iclk from omap_l3 struct   Santosh Shilimkar
• [PATCH V2 00/19] bus: omap_l3_noc: driver cleanups and support for DRA7/AM4372   Santosh Shilimkar
• [PATCH V2 05/19] bus: omap_l3_noc: switch over to relaxed variants of readl/writel   Santosh Shilimkar
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Santosh Shilimkar
• [PATCH v2 1/7] device: introduce per device dma_pfn_offset   Santosh Shilimkar
• [PATCH v2 2/7] of: introduce of_dma_get_range() helper   Santosh Shilimkar
• [PATCH v2 3/7] of: introduce of_dma_is_coherent() helper   Santosh Shilimkar
• [PATCH v2 4/7] of: configure the platform device dma parameters   Santosh Shilimkar
• [PATCH v2 5/7] ARM: dma: Use dma_pfn_offset for dma address translation   Santosh Shilimkar
• [PATCH v2 6/7] ARM: dma: implement set_arch_dma_coherent_ops()   Santosh Shilimkar
• [PATCH v2 7/7] ARM: mm: use phys_addr_t in __dma_page_[cpu_to_dev/dev_to_cpu]   Santosh Shilimkar
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Santosh Shilimkar
• [PATCH v2 5/7] ARM: dma: Use dma_pfn_offset for dma address translation   Santosh Shilimkar
• [PATCH v2 7/7] ARM: mm: use phys_addr_t in __dma_page_[cpu_to_dev/dev_to_cpu]   Santosh Shilimkar
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Santosh Shilimkar
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Santosh Shilimkar
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Santosh Shilimkar
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Santosh Shilimkar
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Santosh Shilimkar
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Santosh Shilimkar
• [PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Santosh Shilimkar
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Santosh Shilimkar
• [PATCH v3 0/3] ARM: OMAP2+: AM437x: L2 cache support   Santosh Shilimkar
• [PATCH] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU   Santosh Shilimkar
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Santosh Shilimkar
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Santosh Shilimkar
• [PATCH 0/2] net: Add Keystone NetCP ethernet driver support   Santosh Shilimkar
• [PATCH 1/2] Documentation: dt: net: Add binding doc for Keystone NetCP ethernet driver   Santosh Shilimkar
• [PATCH 0/2] net: Add Keystone NetCP ethernet driver support   Santosh Shilimkar
• [PATCH v2 0/6] soc: ti: Add Keystone Navigator drivers   Santosh Shilimkar
• [PATCH v2 1/6] soc: Introduce drivers/soc place-holder for SOC specific drivers   Santosh Shilimkar
• [PATCH v2 2/6] firmware: add Keystone QMSS PDSP accumulator firmware blob   Santosh Shilimkar
• [PATCH v2 3/6] Documentation: dt: soc: add Keystone Navigator QMSS bindings   Santosh Shilimkar
• [PATCH v2 4/6] soc: ti: add Keystone Navigator QMSS driver   Santosh Shilimkar
• [PATCH v2 5/6] Documentation: dt: soc: add Keystone Navigator DMA bindings   Santosh Shilimkar
• [PATCH v2 6/6] soc: ti: add Keystone Navigator DMA support   Santosh Shilimkar
• [PATCH v2 4/6] soc: ti: add Keystone Navigator QMSS driver   Santosh Shilimkar
• [PATCH v3] gpio: omap: implement get_direction   Santosh Shilimkar
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Santosh Shilimkar
• [PATCH] ARM: mm: dma: Update coherent streaming apis with missing memory barrier   Santosh Shilimkar
• [PATCH v3 0/7] of: setup dma parameters using dma-ranges and dma-coherent   Santosh Shilimkar
• [PATCH v3 1/7] device: introduce per device dma_pfn_offset   Santosh Shilimkar
• [PATCH v3 2/7] of: introduce of_dma_get_range() helper   Santosh Shilimkar
• [PATCH v3 3/7] of: introduce of_dma_is_coherent() helper   Santosh Shilimkar
• [PATCH v3 4/7] of: configure the platform device dma parameters   Santosh Shilimkar
• [PATCH v3 5/7] ARM: dma: Use dma_pfn_offset for dma address translation   Santosh Shilimkar
• [PATCH v3 6/7] ARM: dma: implement set_arch_dma_coherent_ops()   Santosh Shilimkar
• [PATCH v3 7/7] ARM: dma: use phys_addr_t in __dma_page_[cpu_to_dev/dev_to_cpu]   Santosh Shilimkar
• [PATCH 0/4] ARM: keystone: Use coherent higher memory address space   Santosh Shilimkar
• [PATCH 1/4] ARM: keystone: Switch over to coherent memory address space   Santosh Shilimkar
• [PATCH 2/4] ARM: keystone: Update the dma offset for non-dt platform devices   Santosh Shilimkar
• [PATCH 3/4] ARM: dts: keystone: Use dma-ranges property   Santosh Shilimkar
• [PATCH 4/4] ARM: dts: keystone: Update USB node for dma properties   Santosh Shilimkar
• [Patch v2 1/4] soc: Placeholder files for drivers/soc   Santosh Shilimkar
• [PATCH 2/2] net: Add Keystone NetCP ethernet driver   Santosh Shilimkar
• [PATCH v2] mtd: davinci-nand: disable subpage write for keystone-nand   Santosh Shilimkar
• [PATCH v3 4/7] of: configure the platform device dma parameters   Santosh Shilimkar
• [PATCH] ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7   Alexander Shiyan
• Re: [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Alexander Shiyan
• Re: [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Alexander Shiyan
• Re: [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Alexander Shiyan
• Re: [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree   Alexander Shiyan
• Re: [PATCH] i2c: cadence: fix Kconfig dependency   Alexander Shiyan
• Re: [PATCH] i2c: cadence: fix Kconfig dependency   Alexander Shiyan
• Re: mx27 running too slow   Alexander Shiyan
• [PATCH] ARM: dts: i.MX: Use single naming style for i.MX WEIM devices   Alexander Shiyan
• [PATCH v2] ARM: dts: i.MX: Use single naming style for i.MX WEIM devices   Alexander Shiyan
• Re: [PATCH v2] ARM: dts: i.MX: Use single naming style for i.MX WEIM devices   Alexander Shiyan
• [PATCH v3] ARM: dts: i.MX: Use single naming style for i.MX WEIM device   Alexander Shiyan
• [PATCH v2] ARM i.MX51: Add Digi ConnectCore devicetree   Alexander Shiyan
• Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support   Alexander Shiyan
• Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support   Alexander Shiyan
• [PATCH 01/10] ARM: dts: imx51-babbage: Use separate pingroup for gpio-keys   Alexander Shiyan
• [PATCH 02/10] ARM: dts: imx51-babbage: Use separate pingroup for fixed-clock   Alexander Shiyan
• [PATCH 03/10] ARM: dts: imx51-babbage: Use separate pingroup for regulator-fixed   Alexander Shiyan
• [PATCH 04/10] ARM: dts: imx51-babbage: Move "hog" pins into corresponded pin groups   Alexander Shiyan
• [PATCH 05/10] ARM: dts: imx51-babbage: Add missing pingroup for PMIC   Alexander Shiyan
• [PATCH 06/10] ARM: dts: imx51-babbage: Use predefined constants for keys definition   Alexander Shiyan
• [PATCH 07/10] ARM: dts: imx51-babbage: Add USB OTG regulator node   Alexander Shiyan
• [PATCH 08/10] ARM: dts: imx51-babbage: Sort nodes by name   Alexander Shiyan
• [PATCH 09/10] ARM: dts: imx51-babbage: Add "clock-frequency" property for I2C2   Alexander Shiyan
• [PATCH 10/10] ARM: dts: imx51-babbage: Add devicetree node for I2C1   Alexander Shiyan
• [PATCH 1/2] ARM: dts: i.MX27: Allow to define partitions onto SDHC   Alexander Shiyan
• [PATCH 2/2] ARM: dts: i.MX51: Allow to define partitions onto SDHC, PATA and NFC   Alexander Shiyan
• Re: [PATCH 02/10] ARM: dts: imx51-babbage: Use separate pingroup for fixed-clock   Alexander Shiyan
• Re: [PATCH 1/2] ARM: dts: i.MX27: Allow to define partitions onto SDHC   Alexander Shiyan
• Re: [PATCH] mmc: mmci: switch the driver to using gpio descriptors   Alexander Shiyan
• Re: [RFC] ARM: dts: imx27-pdk: Add PMIC support   Alexander Shiyan
• Re: USB OTG support on mx27pdk   Alexander Shiyan
• Re: [PATCH] ARM: dts: imx27-pdk: Add PMIC support   Alexander Shiyan
• [PATCH 1/8] ARM: dts: i.MX51: Allow to define partitions onto NFC   Alexander Shiyan
• [PATCH 2/8] ARM: dts: imx51-babbage: Move "hog" pins into corresponded pin groups   Alexander Shiyan
• [PATCH 3/8] ARM: dts: imx51-babbage: Add missing pingroup for PMIC   Alexander Shiyan
• [PATCH 4/8] ARM: dts: imx51-babbage: Use predefined constants for keys definition   Alexander Shiyan
• [PATCH 5/8] ARM: dts: imx51-babbage: Add USB OTG regulator node   Alexander Shiyan
• [PATCH 6/8] ARM: dts: imx51-babbage: Sort nodes by name   Alexander Shiyan
• [PATCH 7/8] ARM: dts: imx51-babbage: Add devicetree node for I2C1   Alexander Shiyan
• [PATCH 8/8] ARM: dts: imx51-babbage: Use predefined constants for clock definition   Alexander Shiyan
• [PATCH] ARM i.MX51: Add Efika MX Smartbook devicetree   Alexander Shiyan
• Re: USB OTG support on mx27pdk   Alexander Shiyan
• Re: [PATCH] ARM i.MX51: Add Efika MX Smartbook devicetree   Alexander Shiyan
• Re: [PATCH 2/3] ARM: dts: imx27: Place the usb phy nodes in the board dts files   Alexander Shiyan
• Re: [PATCH 1/2] ARM: dts: imx27-pdk: Add NAND support   Alexander Shiyan
• Re: [PATCH 2/2] ARM: dts: imx27-pdk: Add keypad support   Alexander Shiyan
• Re: [PATCH 1/2] ARM: dts: imx27-pdk: Add NAND support   Alexander Shiyan
• Re: [PATCH] ARM i.MX51: Add Efika MX Smartbook devicetree   Alexander Shiyan
• [PATCH] ARM: i.MX: Remove #ifdef CONFIG_OF   Alexander Shiyan
• Re: USB OTG support on mx27pdk   Alexander Shiyan
• [PATCH 1/2] ARM: i.MX27 clk: Add missing clocks for MSHC and RTIC   Alexander Shiyan
• [PATCH 2/2] ARM: i.MX27 clk: Remove clk_register_clkdev() for unused clocks   Alexander Shiyan
• Re: SD CRC error on mx27pdk   Alexander Shiyan
• [PATCH 1/8] ARM: dts: imx27-phytec-phycore-rdk: Remove duplicate entries for USB PHY   Alexander Shiyan
• [PATCH 2/8] ARM: dts: imx27-phytec-phycore-som: Fix active level for FEC reset   Alexander Shiyan
• [PATCH 3/8] ARM: dts: imx27-phytec-phycore-som: Disable PM pins for USB OTG   Alexander Shiyan
• [PATCH 4/8] ARM: dts: imx: Remove excess entries for PMIC   Alexander Shiyan
• [PATCH 5/8] ARM: dts: imx27-phytec-phycore-rdk: Add CSI enable switch   Alexander Shiyan
• [PATCH 6/8] ARM: dts: imx27-phytec-phycore-rdk: Fix "reg" property for USBH2 PHY   Alexander Shiyan
• [PATCH 7/8] ARM: dts: imx27: Trim node name for FEC   Alexander Shiyan
• [PATCH 8/8] ARM: dts: imx27-phytec-phycore-*: Move "iomux" node to the bottom of file   Alexander Shiyan
• [PATCH RESEND] clocksource: nspire: Fix compiler warning   Alexander Shiyan
• Re: [PATCH 7/8] ARM: dts: imx27: Trim node name for FEC   Alexander Shiyan
• Re: [PATCH 7/8] ARM: dts: imx27: Trim node name for FEC   Alexander Shiyan
• Re: [PATCH 8/8] ARM: dts: imx27-phytec-phycore-*: Move "iomux" node to the bottom of file   Alexander Shiyan
• [PATCH] ARM; i.MX: Fix eMMa PrP resource size   Alexander Shiyan
• Re: [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Alexander Shiyan
• Re: [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Alexander Shiyan
• Re: [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed   Alexander Shiyan
• [PATCH] ARM: shmobile: r8a7791: add EHCI clock DT support   Sergei Shtylyov
• [PATCH] ARM: shmobile: r8a7791: Add EHCI MSTP clock   Sergei Shtylyov
• [PATCH] pci-rcar-gen2: add device tree support   Sergei Shtylyov
• [PATCH v2 0/2] Add PCI USB DT support for R8A7790/Lager reference board   Sergei Shtylyov
• [PATCH v2 1/2] ARM: shmobile: r8a7790: add internal PCI bridge nodes   Sergei Shtylyov
• [PATCH v2 2/2] ARM: shmobile: lager: enable internal PCI   Sergei Shtylyov
• [PATCH 0/2] Add PCI USB DT support for R8A7791/Koelsch reference board   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: r8a7791: add internal PCI bridge nodes   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: koelsch: enable internal PCI   Sergei Shtylyov
• [PATCH v2 0/2] Add PCI USB DT support for R8A7790/Lager reference board   Sergei Shtylyov
• The Alphabet (or, the sorting of Kconfig symbols)   Sergei Shtylyov
• [PATCH v2 0/2] Add USB PHY DT support for R8A7790/Lager reference board   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: r8a7790: add USB PHY DT support   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: lager: enable USB PHY   Sergei Shtylyov
• [PATCH 0/2] Add USB PHY DT support for R8A7791/Koelsch reference board   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: r8a7791: add USB PHY DT support   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: koelsch: enable USB PHY   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: koelsch: enable USB PHY   Sergei Shtylyov
• [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY   Sergei Shtylyov
• [PATCH] ARM: shmobile: r8a7791: link PCI USb devices to USB PHY   Sergei Shtylyov
• [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY   Sergei Shtylyov
• [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY   Sergei Shtylyov
• [PATCH] ARM: shmobile: r8a7790: link PCI USb devices to USB PHY   Sergei Shtylyov
• [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver   Sergei Shtylyov
• [PATCH v8 2/3] net: hisilicon: new hip04 MDIO driver   Sergei Shtylyov
• [PATCH v8 2/3] net: hisilicon: new hip04 MDIO driver   Sergei Shtylyov
• [PATCH 3/9] iommu/ipmmu-vmsa: Define driver-specific page directory sizes   Sergei Shtylyov
• [PATCH 05/14] ARM: shmobile: koelsch-reference: Work around core clock issues   Sergei Shtylyov
• [PATCH 05/14] ARM: shmobile: koelsch-reference: Work around core clock issues   Sergei Shtylyov
• [PATCH 1/4] dma: ste_dma40: Maintain spinlock order while handling pause   Sergei Shtylyov
• [PATCH v2 1/9] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf   Sergei Shtylyov
• [PATCH v2 1/9] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf   Sergei Shtylyov
• [PATCH 1/6] PM / clock_ops: Add helpers combining generic runtime and generic clock PM   Sergei Shtylyov
• [PATCH 11/23] ARM: dts: omap5-uevm.dts: add tca6424a   Sergei Shtylyov
• [PATCH 11/23] ARM: dts: omap5-uevm.dts: add tca6424a   Sergei Shtylyov
• [PATCH 0/2] Add R8A7791/Henninger board DT support   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: henninger: initial device tree   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: henninger: add Ether DT support   Sergei Shtylyov
• [PATCH v2 04/18] xhci-platform: Add a new controller using xhci: Armada 38x   Sergei Shtylyov
• [PATCH] ARM: shmobile: henninger: enable SATA0   Sergei Shtylyov
• [PATCH 7/8] ARM: dts: imx27: Trim node name for FEC   Sergei Shtylyov
• [PATCH 07/10] ARM: dts: DRA7: Add DT node for DES IP   Sergei Shtylyov
• [PATCH 7/8] ARM: dts: imx27: Trim node name for FEC   Sergei Shtylyov
• [PATCH] clk: qcom: Remove accidental merged reject file   Sergei Shtylyov
• mx27 running too slow   Sebastian Andrzej Siewior
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Sebastian Andrzej Siewior
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Sebastian Andrzej Siewior
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Sebastian Andrzej Siewior
• BUG: spinlock trylock failure on UP, i.MX28 3.12.15-rt25   Sebastian Andrzej Siewior
• [PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   Sebastian Andrzej Siewior
• [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   Sebastian Andrzej Siewior
• [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early   Sebastian Andrzej Siewior
• [RFC PATCH] sched_clock: also call register_current_timer_delay() if possible   Sebastian Andrzej Siewior
• [RFC PATCH] sched_clock: also call register_current_timer_delay() if possible   Sebastian Andrzej Siewior
• [PATCH] arm: socfpga: reserve the region at start of phys mem   Sebastian Andrzej Siewior
• [RFC PATCH] sched_clock: also call register_current_timer_delay() if possible   Sebastian Andrzej Siewior
• [PATCH] arm: socfpga: reserve the region at start of phys mem   Sebastian Andrzej Siewior
• [PATCH 1/2] GPIO: Add driver for Zynq GPIO controller   Michal Simek
• [PATCH 63/75] ARM: l2c: zynq: remove cache size override   Michal Simek
• [PATCH 06/75] ARM: outer cache: add documentation of outer cache functions   Michal Simek
• [PATCH 15/75] ARM: l2c: add and use L2C revision constants   Michal Simek
• [PATCH 63/75] ARM: l2c: zynq: remove cache size override   Michal Simek
• [PATCH v7 1/2] dma: Add Xilinx Video DMA DT Binding Documentation   Michal Simek
• [PATCH 02/10] ARM: EXYNOS: Correct file path in comment message   Michal Simek
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Michal Simek
• [PATCH v3 1/2] i2c: Add driver for Cadence I2C controller   Michal Simek
• [PATCH v3 1/2] i2c: Add driver for Cadence I2C controller   Michal Simek
• ARM gcov support   Michal Simek
• [PATCH RFC 3/3] nand: pl353: Add driver for arm pl353 smc nand interface   Michal Simek
• [PATCH 00/75] l2c series   Michal Simek
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Michal Simek
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Michal Simek
• [PATCH] clk: si570: Fix email address specifiction   Michal Simek
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Michal Simek
• [PATCH 63/75] ARM: l2c: zynq: remove cache size override   Michal Simek
• [PATCH 00/75] l2c series   Michal Simek
• [PATCH V2 02/19] mmc: mmci: Convert to devm functions   Michal Simek
• [PATCH v2 1/5] ARM: zynq: DT: Add 'clock-latency' property   Michal Simek
• [PATCH v5 3/3] ARM: zynq: dt: Add I2C nodes to Zynq device tree   Michal Simek
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Michal Simek
• [PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT   Michal Simek
• [PATCH 00/75] l2c series   Michal Simek
• [PATCH] i2c: cadence: fix Kconfig dependency   Michal Simek
• [PATCH v7 1/2] can: xilinx CAN controller support   Michal Simek
• [PATCH] i2c: cadence: fix Kconfig dependency   Michal Simek
• [PATCH 00/75] l2c series   Michal Simek
• [PATCH 1/3] arm64: Provide read/write fault information in compat signal handlers   Michal Simek
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Michal Simek
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Michal Simek
• [PATCH] i2c: cadence: fix Kconfig dependency   Michal Simek
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Michal Simek
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Michal Simek
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Michal Simek
• [RFC PATCH] edac: add support for ARM PL310 L2 cache parity   Michal Simek
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Michal Simek
• [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller   Michal Simek
• [PATCH v2 2/5] ARM: zynq: dt: Convert to preprocessor includes   Michal Simek
• [PATCH 1/2] GPIO: Add driver for Zynq GPIO controller   Michal Simek
• [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node   Michal Simek
• [PATCH] clk: zynq: Leave debug clocks in bootup state   Michal Simek
• [PATCH v3 2/3] dma: Add Xilinx Video DMA DT Binding Documentation   Michal Simek
• [Qemu-devel] Change of TEXT_OFFSET for multi_v7_defconfig   Michal Simek
• [GIT PULL] serial: Cadence   Michal Simek
• [RESEND PATCH v3 8/9] tty: cadence: Document DT binding   Michal Simek
• [RESEND PATCH v3 9/9] ARM: zynq: DT: Migrate UART to Cadence binding   Michal Simek
• [PATCH v2 00/21] FDT clean-ups and libfdt support   Michal Simek
• [GIT PULL] serial: Cadence   Michal Simek
• [GIT PULL] serial: Cadence   Michal Simek
• [GIT PULL v3] Xilinx Zynq changes for v3.15   Michal Simek
• [GIT PULL v3] Xilinx Zynq changes for v3.15   Michal Simek
• [GIT PULL v3] Xilinx Zynq changes for v3.15   Michal Simek
• [PATCH v3] pcie: Add Xilinx PCIe Host Bridge IP driver   Michal Simek
• [PATCH v4 1/3] i2c: cadence: Document device tree bindings   Gerhard Sittig
• [PATCH v3 2/4] live migration support for initial write protect of VM   Mario Smarduch
• [PATCH v4 0/5] live migration dirty bitmap support for ARMv7   Mario Smarduch
• [PATCH v4 1/5] add ARMv7 HYP API to flush VM TLBs without address param   Mario Smarduch
• [PATCH v4 2/5] live migration support for initial write protect of VM   Mario Smarduch
• [PATCH v4 3/5] live migration support for VM dirty log management   Mario Smarduch
• [PATCH v4 4/5] add 2nd stage page fault handling during live migration   Mario Smarduch
• [PATCH v4 5/5] change update_range to handle > 4GB 2nd stage range for ARMv7   Mario Smarduch
• mach header files   Barry Song
• [PATCH 59/75] ARM: l2c: prima2: remove cache size override   Barry Song
• [PATCH 59/75] ARM: l2c: prima2: remove cache size override   Barry Song
• [PATCH 0/5] spi : sirf: some chip-select, DMA and checkpatch fixes   Barry Song
• [PATCH 1/5] spi: sirf: correct TXFIFO empty interrupt status bit   Barry Song
• [PATCH 2/5] spi: sirf: set SPI controller in RISC IO chipselect mode   Barry Song
• [PATCH 3/5] spi: sirf: make GPIO chipselect function work well   Barry Song
• [PATCH 4/5] spi: sirf: fix line over 80 characters style issue   Barry Song
• [PATCH 5/5] spi: sirf: fix spi full-duplex DMA transferring issue   Barry Song
• [PATCH 5/5] spi: sirf: fix spi full-duplex DMA transferring issue   Barry Song
• [PATCH] clk: sirf: fix a bundle of checkpatch issues   Barry Song
• [PATCH 0/4] pinctrl: sirf: switch to one gpiolib and gpiolib_irqchip helpers   Barry Song
• [PATCH 1/4] pinctrl: sirf: wrap all gpio banks into one gpio_chip   Barry Song
• [PATCH 2/4] pinctrl: sirf: switch driver to use gpiolib irqchip helpers   Barry Song
• [PATCH 3/4] gpio: make handler_data configurable while using gpiolib_irqchip   Barry Song
• [PATCH 4/4] pinctrl: sirf: move to use irq_get_handler_data   Barry Song
• [PATCH 1/2] spi: sirf: refactor spi transfer functions   Barry Song
• [PATCH 2/2] spi: sirf: decrease the interrupt count and latency of PIO mode   Barry Song
• [PATCH] clk: sirf: fix a bundle of checkpatch issues   Barry Song
• [PATCH v2] clk: sirf: fix a bundle of checkpatch issues   Barry Song
• [PATCH] ARM: prima2: remove L2 cache size override   Barry Song
• [PATCH 5/5] spi: sirf: fix spi full-duplex DMA transferring issue   Barry Song
• [PATCH] ARM: prima2: remove L2 cache size override   Barry Song
• [PATCH] ARM: prima2: remove L2 cache size override   Barry Song
• [PATCH] ARM: prima2: remove L2 cache size override   Barry Song
• [PATCH 0/4] pinctrl: sirf: switch to one gpiolib and gpiolib_irqchip helpers   Barry Song
• [PATCH 0/4] pinctrl: sirf: switch to one gpiolib and gpiolib_irqchip helpers   Barry Song
• [PATCH 3/4] gpio: make handler_data configurable while using gpiolib_irqchip   Barry Song
• [PATCH 4/4] pinctrl: sirf: move to use irq_get_handler_data   Barry Song
• [PATCH] ARM: prima2: remove L2 cache size override   Barry Song
• [PATCH 3/4] gpio: make handler_data configurable while using gpiolib_irqchip   Barry Song
• [PATCH 3/4] gpio: make handler_data configurable while using gpiolib_irqchip   Barry Song
• [PATCH 4/4] pinctrl: sirf: move to use irq_get_handler_data   Barry Song
• [PATCH v2] ARM: prima2: remove L2 cache size override   Barry Song
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Barry Song
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Barry Song
• [PATCH] ARM: l2c: prima2: only call l2x0_of_init() on matching nodes   Barry Song
• [PATCH] Input: atkbd - fix keyboard LG Electronics   Sheng-Liang Song
• [PATCH] Input: atkbd - fix keyboard LG Electronics   Sheng-Liang Song
• [PATCH] Input: atkbd - fix keyboard LG Electronics   Sheng-Liang Song
• Inconsistent lock state introduced by ipv6/addrconf change   Hannes Frederic Sowa
• [linux-sunxi] Re: [PATCH 7/7] ARM: sun7i: cubietruck: enable bluetooth module   Arend van Spriel
• ARMv8: Allowing user space to perform cache-maintenance   Rajan Srivastava
• [PATCH] arm/xen: Remove definiition of virt_to_pfn in asm/xen/page.h   Stefano Stabellini
• [PATCH 4/8] PCI: imx6: use new clock names   Lucas Stach
• [RESEND: RFC PATCH 3/3] pcie: keystone: add pcie driver based on designware core driver   Lucas Stach
• [PATCH 4/8] PCI: imx6: use new clock names   Lucas Stach
• [PATCH v7 02/10] PCI: host: rcar: Add MSI support   Lucas Stach
• [PATCH v7 05/10] dt-bindings: pci: rcar pcie device tree bindings   Lucas Stach
• [PATCH v2 6/6] PCI: designware: use new OF interrupt mapping when possible   Lucas Stach
• [PATCH v2 rebased] PCI: rcar: use new OF interrupt mapping when possible   Lucas Stach
• [PATCH 1/4] ARM: dts: imx6: edmqmx6: Fix usbotg id pin   Lucas Stach
• [PATCH 2/4] ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator   Lucas Stach
• [PATCH 3/4] ARM: dts: imx6: edmqmx6: USB H1 only supports host mode   Lucas Stach
• [PATCH 4/4] ARM: dts: imx6: edmqmx6: add second STMPE   Lucas Stach
• [PATCH 1/2] ARM: dt-binding: fix GIC example   Lucas Stach
• [PATCH 1/2] ARM: dt-binding: fix GIC example   Lucas Stach
• [PATCH] ARM: imx: propagate DI clock changes up the clock tree to PLL5   Lucas Stach
• [PATCH 1/6] ARM: dts: keystone: drop address and size cells from GIC node   Lucas Stach
• [PATCH 2/6] ARM: dts: highbank, ecx-2000: drop address and size cells from GIC node   Lucas Stach
• [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node   Lucas Stach
• [PATCH 4/6] ARM: dts: vybrid: drop address and size cells from GIC node   Lucas Stach
• [PATCH 5/6] ARM: dts: ste-dbx: drop address cells from GIC node   Lucas Stach
• [PATCH 6/6] ARM: dts: sh: drop address cells from GIC node   Lucas Stach
• [PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node   Lucas Stach
• [PATCH v2 1/6] ARM: dts: keystone: drop address and size cells from GIC node   Lucas Stach
• [PATCH v2 2/6] ARM: dts: highbank, ecx-2000: drop address and size cells from GIC node   Lucas Stach
• [PATCH v2 3/6] ARM: dts: zynq: drop address cells from GIC node   Lucas Stach
• [PATCH v2 4/6] ARM: dts: ste-dbx: drop address cells from GIC node   Lucas Stach
• [PATCH v2 5/6] ARM: shmobile: r8a7740: drop address cells from GIC node   Lucas Stach
• [PATCH v2 6/6] ARM: shmobile: sh73a0: drop address cells from GIC node   Lucas Stach
• [PATCH] arm: allow all architectures to change max zone order   Lucas Stach
• [PATCH] arm: allow all architectures to change max zone order   Lucas Stach
• [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible   Lucas Stach
• [PATCH v2 2/6] PCI: tegra: use new OF interrupt mapping when possible   Lucas Stach
• [PATCH 1/2] ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel   Lucas Stach
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Lucas Stach
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Lucas Stach
• [PATCH 0/8] i.MX6 PCIe binding change and MSI support   Lucas Stach
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Lucas Stach
• [PATCH 0/8] i.MX6 PCIe binding change and MSI support   Lucas Stach
• [PATCH] ARM: imx6q: work around faulty PMU irq routing   Lucas Stach
• [PATCH 3/8] ARM: dts: imx6: update pcie to bring in line with new binding   Lucas Stach
• [PATCH] ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie   Lucas Stach
• [PATCH 0/4] Update to Exynos clocks   Tomasz Stanislawski
• [PATCH 1/4] clk: propagate parent change up one level   Tomasz Stanislawski
• [PATCH 2/4] clk: exynos4: export sclk_hdmiphy clock   Tomasz Stanislawski
• [PATCH 3/4] clk: exynos4: enable clk_set_parent() propagation for sclk_hdmi and sclk_mixer clocks   Tomasz Stanislawski
• [PATCH 4/4] Revert "drm/exynos: add mout_hdmi clock in hdmi driver to change parent"   Tomasz Stanislawski
• [PATCH 0/2] Add support for sii9234 chip   Tomasz Stanislawski
• [PATCH 1/2] misc: add sii9234 driver   Tomasz Stanislawski
• [PATCH 2/2] arm: dts: trats2: add SiI9234 node   Tomasz Stanislawski
• [PATCH] arm: dts: exynos4412-trats2: rename alias for i2c_ak8975 label   Tomasz Stanislawski
• [PATCH] arm: dts: exynos4: add missing pinctrls for I2C controllers   Tomasz Stanislawski
• [PATCH] gpio/at91: free GPIO after configuring as input   Alexander Stein
• [PATCH] pinctrl/at91: Fix pin_to_mask   Alexander Stein
• [PATCH] pinctrl/at91: Fix pin_to_mask   Alexander Stein
• [PATCH] gpio/at91: free GPIO after configuring as input   Alexander Stein
• [PATCH] pinctrl/at91: Fix mask creation in at91_gpio_dbg_show   Alexander Stein
• Device tree support for Atmel AC97 controller on AT91SAM9263   Alexander Stein
• [PATCH 1/4] ALSA: sound/atmel/ac97c.c: Convert to module_platform_driver   Alexander Stein
• [PATCH 2/4] ALSA: sound/atmel-ac97c.h: Remove unused flags from platform data   Alexander Stein
• [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support   Alexander Stein
• [PATCH 4/4] ARM: at91/dt: sam9263: Add ac97 device node   Alexander Stein
• [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support   Alexander Stein
• [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support   Alexander Stein
• Device tree support for Atmel AC97 controller on AT91SAM9263   Alexander Stein
• Device tree support for Atmel AC97 controller on AT91SAM9263   Alexander Stein
• [PATCH v2] pinctrl/at91: Fix mask creation in at91_gpio_dbg_show   Alexander Stein
• [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support   Alexander Stein
• [PATCH] pinctrl/at91: convert driver to use gpiolib irqchip   Alexander Stein
• [PATCH] pinctrl/at91: convert driver to use gpiolib irqchip   Alexander Stein
• [PATCH] pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs   Alexander Stein
• [PATCH] pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs   Alexander Stein
• [PATCH v2] pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs   Alexander Stein
• [PATCH 1/2] usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails   Alan Stern
• [PATCH 1/2] usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails   Alan Stern
• [PATCH v2 1/2] usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails   Alan Stern
• [PATCH v2 2/2] usb: ehci-pla