[PATCH 05/17] ARM: exynos: cpuidle: Move some code inside the idle_finisher

[Daniel Lezcano]

On 04/04/2014 10:50 AM, Viresh Kumar wrote:
> On 4 April 2014 13:17, Daniel Lezcano <daniel.lezcano at linaro.org> wrote:
>> Move the code around to differentiate different section of code and prepare it
>> to be factored out in the next patches.
>>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
>> ---
>>   arch/arm/mach-exynos/cpuidle.c |   17 +++++++++--------
>>   1 file changed, 9 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
>> index 18f6aba..9cd1ed9 100644
>> --- a/arch/arm/mach-exynos/cpuidle.c
>> +++ b/arch/arm/mach-exynos/cpuidle.c
>> @@ -88,7 +88,16 @@ static void restore_cpu_arch_register(void)
>>
>>   static int idle_finisher(unsigned long flags)
>>   {
>> +       exynos_set_wakeupmask();
>> +
>> +       __raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
>> +       __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
>> +
>> +       /* Set value of power down register for aftr mode */
>> +       exynos_sys_powerdown_conf(SYS_AFTR);
>
> Just to highlight this, you have changed the order in which these
> things were done earlier.. In case that have any side effects.

Yes, that's correct. I changed the order. That doesn't have a side 
effect because the calls are independent. The important call is 
cpu_do_idle() which must be done the last.

>>          cpu_do_idle();
>> +
>>          return 1;
>>   }
>>
>> @@ -98,14 +107,6 @@ static int exynos_enter_core0_aftr(struct cpuidle_device *dev,
>>   {
>>          unsigned long tmp;
>>
>> -       exynos_set_wakeupmask();
>> -
>> -       /* Set value of power down register for aftr mode */
>> -       exynos_sys_powerdown_conf(SYS_AFTR);
>> -
>> -       __raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
>> -       __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
>> -
>>          save_cpu_arch_register();
>>
>>          /* Setting Central Sequence Register for power down mode */
>
> Here as well, we do all above (-) things after this sequence now:
>
> save_cpu_arch_register();
>
> /* Setting Central Sequence Register for power down mode */
> tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
> tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
> __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
>
> cpu_pm_enter();
>
> Probably mention that in log too, that it doesn't have any side effects?
>
> Reviewed-by: Viresh Kumar <viresh.kumar at linaro.org>
>


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog