[PATCH RESEND 0/5] ARM: berlin: add pinctrl support
Antoine Ténart
antoine.tenart at free-electrons.com
Thu Apr 10 06:07:49 PDT 2014
I made a typo in the LAKML address, so resend it.
This series add support for the Marvell Berlin pinctrl, allowing to
configure the pinmuxing from the device tree.
This is a group based pinmux and only group informations are defined.
For this to work a modification in the pinctrl framework is needed so
that get_group_pin could not be defined. Please have a look on patches
1/5 and 2/5 commit logs.
This serie applies on top of patches introducing the Marvell Berlin
BG2Q you can find on Sebastian's for-next branch[1] and Alexandre's
BG2Q symbol introduction[2].
Tested on the Berlin BG2Q.
[1] https://github.com/shesselba/linux-berlin/commits/for-next
[2] https://patchwork.kernel.org/patch/3876141/
Antoine Ténart (5):
pinctrl: allows not to define the get_group_pins operation
pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs
Documentation: add the Marvell Berlin pinctrl documentation
ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
.../bindings/pinctrl/marvell,berlin-pinctrl.txt | 43 ++
arch/arm/boot/dts/berlin2.dtsi | 20 +
arch/arm/boot/dts/berlin2cd.dtsi | 13 +
arch/arm/boot/dts/berlin2q.dtsi | 20 +
arch/arm/mach-berlin/Kconfig | 2 +
drivers/pinctrl/Kconfig | 4 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/core.c | 17 +-
drivers/pinctrl/pinctrl-berlin.c | 498 +++++++++++++++++++++
drivers/pinctrl/pinctrl-berlin.h | 72 +++
drivers/pinctrl/pinmux.c | 23 +-
11 files changed, 696 insertions(+), 17 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,berlin-pinctrl.txt
create mode 100644 drivers/pinctrl/pinctrl-berlin.c
create mode 100644 drivers/pinctrl/pinctrl-berlin.h
--
1.8.3.2
More information about the linux-arm-kernel
mailing list