[PATCH v2 00/10] ARM: Exynos: PMU cleanup and refactoring for using DT
Pankaj Dubey
pankaj.dubey at samsung.com
Fri Apr 25 19:07:14 PDT 2014
Hi Tomasz,
On Sat, Apr 26, 2014 at 7:43 AM, Tomasz Figa <tomasz.figa at gmail.com> wrote:
>
> Hi Pankaj,
>
> Just a small note - please refrain from sending next versions of series in reply to previous version. With threading applied, it gets hard to notice that a new version was posted, because the first message of the thread is always v1. Also it makes threads unnecessarily long.
>
OK. I will take care in future.
>
> Best regards,
> Tomasz
>
>
> On 25.04.2014 14:32, Pankaj Dubey wrote:
>>
>> This patch series, does some minor cleanup and modifies Exynos PMU related
>> code for mapping and initialization of Exynos Power Management Unit (PMU)
>> base address from device tree. This is also preparation for moving PMU
>> related code out of machine folder and moving into a "drivers/mfd", so that
>> ARM64 based SoC can utilize common piece of code. These patches require change
>> in Exynos4210, Exynos4212 and Exynos4412 dtsi files, which has been posted
>> as separate patch series [2]
>>
>> These patches are created on top of Kukjin Kim's for-next (v3.15-rc1 tag)
>> branch.
>>
>> These patches depends on following two patch series:
>> 1) mfd: syscon: Support early initialization
>> https://lkml.org/lkml/2014/4/8/239
>> 2) Add PMU node for Exynos SoCs
>> http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg29329.html
>>
>> We have tested these patches on SMDK5250 and Arndale (Exynos5250) boards for
>> System boot and PMU initialization and S2R.
>>
>> For testing on Arndale (Exynos5250) board:
>> Tested-by: Pankaj Dubey <pankaj.dubey at samsung.com>
>>
>> Changes Since v1:
>> - Rebased on latest for-next of Kukjin Kim's tree.
>> - Added patch: "Make exynos machine_ops as static".
>> For making more cleanup in "mach-exynos/common.h"
>> as suggested by Tomasz Figa.
>> - Addressed comments of Tomasz Figa for cleaning "mach-exynos/common.h".
>> - Updated patch: Remove file path from comment section
>> As suggested by Michel Simek, instead of updating file path
>> lets remove them from each file under "mach-exynos".
>> Even though Kukjin pointed out that there is similar patch pending from
>> Sachin/Tushar but since I could not find I have included this here. If
>> I have missed something please point to any existing such patch.
>> - Updated patch: Add support for mapping PMU base address via DT
>> - Removed __initdata from declaration of "exynos_pmu_base", as it caused
>> kernel crash as pointed out by Vikas Sajjan.
>> - Added support for Syscon initialization and getting PMU regmap handle
>> as suggested by Sylwester. Since current implementation of early
>> intialization [1] has limitation that "early_syscon_init" requires
>> DT to be unflattened and system should be able to allocate memory,
>> we can't use regmap handles for platsmp.c file as "smp_secondary_init"
>> will be called before DT unflattening. So I have kept both method for
>> accessing PMU base address. platsmp.c will use ioremmaped address where
>> as rest other files can use regmap handle.
>> - Added patch: Remove "linux/bug.h" from pmu.c.
>> - Updated patch: Refactored code for PMU register mapping via DT
>> - Modified to use regmap_read/write when using regmap handle.
>> - Added patch: Move "mach/map.h" inclusion from regs-pmu.h to platsmp.c
>> - Added patch: Add device tree based initialization support for PMU.
>> - Convert existing PMU implementation to be a device tree based
>> before moving it to "drivers/mfd" folder. As suggested by Bartlomiej.
>> - Dropped making a platform_driver for PMU, as currently PMU binding
>> has two compatibility strings as "samsung, exynosxxx-pmu", "syscon",
>> once we enable MFD_SYSCON config option, current "syscon" driver probe
>> gets called and PMU probe never gets called. So modified PMU
>> initialization code to scan DT and match against supported compatiblity
>> string in driver code, and once we get matching node use that for
>> accessing PMU regmap handle using "syscon_early_regmap_lookup_by_phandle".
>> If there is any better solution please suggest.
>>
>> Pankaj Dubey (6):
>> ARM: EXYNOS: Make exynos machine_ops as static
>> ARM: EXYNOS: Cleanup "mach-exynos/common.h" file
>> ARM: EXYNOS: Remove file path from comment section
>> ARM: EXYNOS: Refactored code for using PMU address via DT
>> ARM: EXYNOS: Move "mach/map.h" inclusion from regs-pmu.h to platsmp.c
>> ARM: EXYNOS: Add device tree based initialization support for PMU.
>>
>> Young-Gun Jang (4):
>> ARM: EXYNOS: Move SYSREG definition into sys-reg specific file.
>> ARM: EXYNOS: Remove regs-pmu.h header dependency from pm_domain
>> ARM: EXYNOS: Add support for mapping PMU base address via DT
>> ARM: EXYNOS: Remove "linux/bug.h" from pmu.c
>>
>> arch/arm/mach-exynos/Kconfig | 2 +
>> arch/arm/mach-exynos/common.h | 13 +-
>> arch/arm/mach-exynos/cpuidle.c | 37 +-
>> arch/arm/mach-exynos/exynos.c | 104 +++++-
>> arch/arm/mach-exynos/headsmp.S | 2 -
>> arch/arm/mach-exynos/hotplug.c | 7 +-
>> arch/arm/mach-exynos/include/mach/map.h | 3 -
>> arch/arm/mach-exynos/include/mach/memory.h | 3 +-
>> arch/arm/mach-exynos/platsmp.c | 17 +-
>> arch/arm/mach-exynos/pm.c | 61 ++--
>> arch/arm/mach-exynos/pm_domains.c | 2 +-
>> arch/arm/mach-exynos/pmu.c | 191 ++++++++---
>> arch/arm/mach-exynos/regs-pmu.h | 512 ++++++++++++++--------------
>> arch/arm/mach-exynos/regs-sys.h | 22 ++
>> 14 files changed, 585 insertions(+), 391 deletions(-)
>> create mode 100644 arch/arm/mach-exynos/regs-sys.h
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list