Wrong SPI NOR model detected by mx6sl

[Huang Shijie]

On Thu, Apr 10, 2014 at 02:16:49PM -0300, Fabio Estevam wrote:
> Hi Marek,
> 
> On Thu, Apr 10, 2014 at 1:07 PM, Marek Vasut <marex at denx.de> wrote:
> 
> > Can you share the JEDEC ID codes that both of the boards actually read from the
> > SPI NOR ? You can dump those in the m25p80.c driver . That'd be helpful, I
> > suspect some kind of an "offset" or "polarity inversion" in the SPI
> > communication causing this.
> 
> On mx6qsabresd:
> 
> m25p80 spi0.0: JEDEC id: 0x202016
> m25p80 spi0.0: m25p32 (4096 Kbytes)
> 
> On mx6sl-evk:
> 
> m25p80 spi0.0: JEDEC id: 0x000000
It seems the kernel can not read out anything from the NOR.
Please check the pinctrl or the schematic.

> m25p80 spi0.0: found mr25h256, expected m25p32
> m25p80 spi0.0: mr25h256 (32 Kbytes)
> 
> Will need to dump the SPI registers to understand why mx6sl behaves like this.
i am not in the office today, else i can test the imx6sl-evk.


thanks
Huang Shijie