[PATCH 0/5] GPIO OMAP driver changes for v3.16

[Javier Martinez Canillas]

Hello Aaro,

On Thu, Apr 10, 2014 at 11:22 PM, Aaro Koskinen <aaro.koskinen at iki.fi> wrote:
> Hi,
>
> On Thu, Apr 10, 2014 at 10:17:44PM +0200, Javier Martinez Canillas wrote:
>> > The same happens also on Nokia 770:
>> >
>> > [    0.118896] genirq: Setting trigger mode 0 for irq 128 failed (gpio_irq_type+0x0/0x220)
>>
>> I don't have those errors when booting on my DM3730 IGEPv2 board but
>> it seems that for some reason on omap1  __irq_set_trigger() complains
>> when IRQ_TYPE_NONE is used as a default flag when calling
>> gpiochip_irqchip_add()
>>
>> Could you please test the following patch and tell me if your board
>> still works and makes the errors go away?
>
> Now it complains about mode 8...
>
> [    0.118835] genirq: Setting trigger mode 8 for irq 128 failed (gpio_irq_type
> +0x0/0x220)
>
> A.
>
>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
>> index 8cc9e91..5bc8aec 100644
>> --- a/drivers/gpio/gpio-omap.c
>> +++ b/drivers/gpio/gpio-omap.c
>> @@ -1122,7 +1122,7 @@ static int omap_gpio_chip_init(struct gpio_bank *bank)
>>
>>         ret = gpiochip_irqchip_add(&bank->chip, &gpio_irq_chip,
>>                                    irq_base, gpio_irq_handler,
>> -                                  IRQ_TYPE_NONE);
>> +                                  IRQ_TYPE_LEVEL_LOW);
>>
>>         if (ret) {
>>                 dev_err(bank->dev, "Couldn't add irqchip to gpiochip
>> %d\n", ret);
>>
>> Best regards,
>> Javier

Thanks for testing. Unfortunately I'm out of ideas on why that error
could be shown and I don't have a way to further debug it without an
omap1 board. I wonder why that pr_err() message is shown or why it is
still working when an error happens.

Maybe Linus or Santosh could give us a hint on what is happening here.

Best regards,
Javier