[PATCH 050/222] ARM: l2c: add automatic enable of early BRESP
Russell King
rmk+kernel at arm.linux.org.uk
Fri Apr 25 04:35:12 PDT 2014
The AXI bus protocol requires that a write response should only be
sent back to the master when the last write has been accepted. Early
BRESP allows the L2C-310 to send the write response as soon as the
store buffer accepts the write address.
Cortex-A9 processors can signal to the L2C-310 that they wish to be
notified early, and if this optimisation is enabled, the L2C-310 can
signal an early write response.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/mm/cache-l2x0.c | 25 ++++++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 3e2c22a12d87..db3f18a968b2 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -24,6 +24,7 @@
#include <linux/of_address.h>
#include <asm/cacheflush.h>
+#include <asm/cputype.h>
#include <asm/hardware/cache-l2x0.h>
#include "cache-tauros3.h"
#include "cache-aurora-l2.h"
@@ -620,6 +621,24 @@ static void l2c310_resume(void)
}
}
+static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
+{
+ unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
+ bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;
+
+ if (rev >= L310_CACHE_ID_RTL_R2P0) {
+ if (cortex_a9) {
+ aux |= L310_AUX_CTRL_EARLY_BRESP;
+ pr_info("L2C-310 enabling early BRESP for Cortex-A9\n");
+ } else if (aux & L310_AUX_CTRL_EARLY_BRESP) {
+ pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n");
+ aux &= ~L310_AUX_CTRL_EARLY_BRESP;
+ }
+ }
+
+ l2c_enable(base, aux, num_lock);
+}
+
static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
struct outer_cache_fns *fns)
{
@@ -677,7 +696,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = {
.type = "L2C-310",
.way_size_0 = SZ_8K,
.num_lock = 8,
- .enable = l2c_enable,
+ .enable = l2c310_enable,
.fixup = l2c310_fixup,
.save = l2c310_save,
.outer_cache = {
@@ -916,7 +935,7 @@ static const struct l2c_init_data of_l2c310_data __initconst = {
.way_size_0 = SZ_8K,
.num_lock = 8,
.of_parse = l2c310_of_parse,
- .enable = l2c_enable,
+ .enable = l2c310_enable,
.fixup = l2c310_fixup,
.save = l2c310_save,
.outer_cache = {
@@ -1264,7 +1283,7 @@ static const struct l2c_init_data of_bcm_l2x0_data __initconst = {
.way_size_0 = SZ_8K,
.num_lock = 8,
.of_parse = l2c310_of_parse,
- .enable = l2c_enable,
+ .enable = l2c310_enable,
.save = l2c310_save,
.outer_cache = {
.inv_range = bcm_inv_range,
--
1.8.3.1
More information about the linux-arm-kernel
mailing list