[PATCHv3 7/7] ARM: sunxi: dt: add PWM support for the cubietruck

[Alexandre Belloni]

Enable the PWM for both PWM channels on the cubietruck. They can be found on
connector CN8.

Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index cb25d3c8da58..0c3bd127a5fd 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -63,6 +63,12 @@
 			};
 		};
 
+		pwm: pwm at 01c20e00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial at 01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
-- 
1.9.1