[PATCH V8 6/9] SPEAr13XX: Add binding information for PCIe controller

[Mohit Kumar]

From: Pratyush Anand <pratyush.anand at st.com>

SPEAr13XX uses designware PCIe controller. This patch adds information
for the PCIe binding properties which are specific to SPEAr13XX SoC
series.

Signed-off-by: Pratyush Anand <pratyush.anand at st.com>
Acked-by: Arnd Bergmann <arnd at arndb.de>
Cc: Mohit Kumar <mohit.kumar at st.com>
Cc: Viresh Kumar <viresh.linux at gmail.com>
Cc: spear-devel at list.st.com
Cc: devicetree at vger.kernel.org
---
 .../devicetree/bindings/pci/spear13xx-pcie.txt     |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/spear13xx-pcie.txt

diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
new file mode 100644
index 0000000..49ea76d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
@@ -0,0 +1,14 @@
+SPEAr13XX PCIe DT detail:
+================================
+
+SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy
+controller.
+
+Required properties:
+- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
+- phys		    : phandle to phy node associated with pcie controller
+- phy-names	    : must be "pcie-phy"
+- All other definitions as per generic PCI bindings
+
+ Optional properties:
+- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.
-- 
1.7.0.1