Re: [PATCH 7/8] ARM: dts: imx27: Trim node name for FEC

[Alexander Shiyan]

Sat, 26 Apr 2014 20:54:11 +0400 от Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>:
> Hello.
> 
> On 26-04-2014 20:39, Alexander Shiyan wrote:
> 
> >>> This patch reduce node name for FEC. Otherwise, the name for PHY
> >>> is composed incorrectly.
> 
> >>> Before:
> >>> fec 1002b000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1002b000.etherne:00, irq=-1)
> 
> >>> After:
> >>> fec 1002b000.fec eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1002b000.fec-1:00, irq=-1)
> 
> >>> Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
> >>> ---
> >>>    arch/arm/boot/dts/imx27.dtsi | 2 +-
> >>>    1 file changed, 1 insertion(+), 1 deletion(-)
> 
> >>> diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
> >>> index a75555c..377339e 100644
> >>> --- a/arch/arm/boot/dts/imx27.dtsi
> >>> +++ b/arch/arm/boot/dts/imx27.dtsi
> >>> @@ -497,7 +497,7 @@
> >>>    				clocks = <&clks 38>;
> >>>    			};
> >>>
> >>> -			fec: ethernet at 1002b000 {
> >>> +			fec: fec at 1002b000 {
> 
> >>      The "ethernet" name complies to the ePAPR standard. Don't change it, please.
> 
> > So this is ok?
> > mii_bus:phy_addr=1002b000.etherne:00
> 
>     Why not? :-)

OK if so. Shawn, please skip this one patch if all other looks OK.

---