[RESEND: RFC PATCH 3/3] pcie: keystone: add pcie driver based on designware core driver

Murali Karicheri m-karicheri2 at ti.com
Fri Apr 4 09:15:27 PDT 2014


On 4/3/2014 4:32 AM, Lucas Stach wrote:
> Am Mittwoch, den 02.04.2014, 13:17 -0400 schrieb Murali Karicheri:
>> Arnd,
>>
>> Thanks for reviewing the RFC patch. Please see below my response.
>>
>> On 3/25/2014 3:44 AM, Arnd Bergmann wrote:
>>> On Monday 24 March 2014 20:35:26 Murali Karicheri wrote:
> [...]
>>>> +	ks_pcie->clk = devm_clk_get(&pdev->dev, "pcie");
>>>> +	if (IS_ERR(ks_pcie->clk)) {
>>>> +		dev_err(&pdev->dev, "Failed to get pcie rc clock\n");
>>>> +		return PTR_ERR(ks_pcie->clk);
>>>> +	}
>>>> +	ret = clk_prepare_enable(ks_pcie->clk);
>>>> +	if (ret)
>>>> +		return ret;
>>> Could you move the clock handling into the generic dw-pcie code?
>> Could be. But currently only pci-exynos.c is using a clock name
>> "pcie".pci-imx6.c uses pcie_axi" and
>> will have to be fixed so that we can move this code to the generic
>> dw-pcie code.  Sean Cross is the
>> author for pci-imx6.c.
>>
>> Sean,
>>
>> Is "pcie_axi" is the pcie hw clock? If so, can you rename this to "pcie"
>> so that  my patch can move the
>> clock handling code to pcie designware code?
>>
> My series "i.MX6 PCIe binding change and MSI support" already changes
> the clock name. So we could consolidate the clock handling once this is
> in. Only difference is that the i.MX6 needs an additional PHY clock.
>
> Regards,
> Lucas
Lucas,

Thanks. I will send a patch for this.

Murali



More information about the linux-arm-kernel mailing list