[PATCH v3 00/11] ARM: at91: rework main and slow clk implementation

[Nicolas Ferre]

On 22/04/2014 06:12, Boris BREZILLON :
> Hello,
> 
> This series introduce the real clock model (as described in atmel datasheets)
> for slow and main clocks.
> 
> The modifications introduced by this series break the DT compat, but, as the
> at91 CCF based implementation is pretty new (introduced in 3.14 only for sama5
> eval boards) I think it won't impact a lot of users.
> 
> Nicolas, Mike, if this series is accepted, I'd like to get it merged as soon as
> possible to prevent other developpers from using a deprecated DT binding.
> Moreover, I think this series should go through the same path for both clk
> and DT changes (whatever path is chosen: either at91 or clk tree) because the
> changes are tightly coupled.

Boris,

First of all, well...
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

I didn't find something to add but the little comment about the
documentation that you already fixed in this v3 version.

Mike,

I would like to merge this whole series through my tree and then the
arm-soc tree. If it is okay for you, can you give your acknowledgement
before that I build a pull-request for the arm-soc guys?

Thanks a lot, bye,

> Changes since v2:
>  - add missing compatible in pmc.c
>  - fix sam9261 slow clock definition
>  - move xtal nodes out of /clocks node
>  - fix DT bindings documentation
>  - fix main RC oscillator initilization
> 
> Changes since v1:
> - fix sam9rl main clk definition
> Boris BREZILLON (11):
>   clk: at91: rework main clk implementation
>   clk: at91: update main clk documentation
>   clk: at91: add slow clks driver
>   clk: at91: add slow clk documentation
>   ARM: at91/dt: move sama5d3 SoC to the new main/slow clk model
>   ARM: at91/dt: add xtal frequencies to sama5d3xcm boards
>   ARM: at91/dt: add xtal frequencies to sama5d3 xplained board
>   ARM: at91/dt: move at91sam9261 SoC to the new main clock model
>   ARM: at91/dt: define main xtal frequency of the at91sam9261ek board
>   ARM: at91/dt: move at91sam9rl SoC to the new slow/main clock models
>   ARM: at91/dt: define sam9rlek crystal frequencies
> 
>  .../devicetree/bindings/clock/at91-clock.txt       | 128 ++++-
>  arch/arm/boot/dts/at91-sama5d3_xplained.dts        |   8 +
>  arch/arm/boot/dts/at91sam9261.dtsi                 |  23 +-
>  arch/arm/boot/dts/at91sam9261ek.dts                |   4 +
>  arch/arm/boot/dts/at91sam9rl.dtsi                  |  46 +-
>  arch/arm/boot/dts/at91sam9rlek.dts                 |   9 +
>  arch/arm/boot/dts/sama5d3.dtsi                     |  61 ++-
>  arch/arm/boot/dts/sama5d3xcm.dtsi                  |   8 +
>  drivers/clk/at91/Makefile                          |   4 +-
>  drivers/clk/at91/clk-main.c                        | 577 ++++++++++++++++++---
>  drivers/clk/at91/clk-slow.c                        | 467 +++++++++++++++++
>  drivers/clk/at91/pmc.c                             |  17 +
>  drivers/clk/at91/pmc.h                             |   9 +
>  drivers/clk/at91/sckc.c                            |  57 ++
>  drivers/clk/at91/sckc.h                            |  22 +
>  include/linux/clk/at91_pmc.h                       |   1 +
>  16 files changed, 1352 insertions(+), 89 deletions(-)
>  create mode 100644 drivers/clk/at91/clk-slow.c
>  create mode 100644 drivers/clk/at91/sckc.c
>  create mode 100644 drivers/clk/at91/sckc.h
> 


-- 
Nicolas Ferre