[PATCH v3 08/13] ARM: dts: add hip04-d01 dts file
Haojian Zhuang
haojian.zhuang at linaro.org
Thu Apr 17 23:05:51 PDT 2014
Add hip04.dtsi & hip04-d01.dts file to support HiP04 SoC platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang at linaro.org>
---
Documentation/devicetree/bindings/arm/gic.txt | 1 +
.../bindings/arm/hisilicon/hisilicon.txt | 10 +
.../devicetree/bindings/clock/hip04-clock.txt | 20 ++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/hip04-d01.dts | 74 +++++++
arch/arm/boot/dts/hip04.dtsi | 239 +++++++++++++++++++++
6 files changed, 345 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt
create mode 100644 arch/arm/boot/dts/hip04-d01.dts
create mode 100644 arch/arm/boot/dts/hip04.dtsi
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 5573c08..150f7d6 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -16,6 +16,7 @@ Main node required properties:
"arm,cortex-a9-gic"
"arm,cortex-a7-gic"
"arm,arm11mp-gic"
+ "hisilicon,hip04-gic"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 3.
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index df0a452..4681f15 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -4,6 +4,10 @@ Hisilicon Platforms Device Tree Bindings
Hi4511 Board
Required root node properties:
- compatible = "hisilicon,hi3620-hi4511";
+HiP04 D01 Board
+Required root node properties:
+ - compatible = "hisilicon,hip04-d01";
+
Hisilicon system controller
@@ -19,6 +23,11 @@ Optional properties:
If reg value is not zero, cpun exit wfi and go
- resume-offset : offset in sysctrl for notifying cpu0 when resume
- reboot-offset : offset in sysctrl for system reboot
+- relocation-entry : relocation address of secondary cpu boot code
+- relocation-size : relocation size of secondary cpu boot code
+- bootwrapper-phys : physical address of boot wrapper
+- bootwrapper-size : size of boot wrapper
+- bootwrapper-magic : magic number for secondary cpu in boot wrapper
Example:
@@ -31,6 +40,7 @@ Example:
reboot-offset = <0x4>;
};
+
PCTRL: Peripheral misc control register
Required Properties:
diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt
new file mode 100644
index 0000000..4d31ae3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt
@@ -0,0 +1,20 @@
+* Hisilicon HiP04 Clock Controller
+
+The HiP04 clock controller generates and supplies clock to various
+controllers within the HiP04 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hip04-clock.h>.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35c146f..7119bca 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
new file mode 100644
index 0000000..a10dcf3
--- /dev/null
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang at linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+ /* memory bus is 64-bit */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "Hisilicon D01 Development Board";
+ compatible = "hisilicon,hip04-d01";
+
+ memory at 0 {
+ device_type = "memory";
+ /*
+ * Bootloader loads kernel image into 0x1000_0000 region,
+ * so disables the region between [0000_0000 - 1000_0000]
+ * temporarily.
+ * Because the PHYS_TO_VIRT_OFFSET is calculated based on
+ * the original region that kenrel is loaded.
+ * This workaround will be removed only after UEFI updated.
+ */
+ reg = <0x00000000 0x10000000 0xc0000000>;
+ };
+
+ memory at 00000004c0000000 {
+ device_type = "memory";
+ reg = <0x00000004 0xc0000000 0x40000000>;
+ };
+
+ memory at 0000000500000000 {
+ device_type = "memory";
+ reg = <0x00000005 0x00000000 0x80000000>;
+ };
+
+ memory at 0000000580000000 {
+ device_type = "memory";
+ reg = <0x00000005 0x80000000 0x80000000>;
+ };
+
+ memory at 0000000600000000 {
+ device_type = "memory";
+ reg = <0x00000006 0x00000000 0x80000000>;
+ };
+
+ memory at 0000000680000000 {
+ device_type = "memory";
+ reg = <0x00000006 0x80000000 0x80000000>;
+ };
+
+ memory at 0000000700000000 {
+ device_type = "memory";
+ reg = <0x00000007 0x00000000 0x80000000>;
+ };
+
+ memory at 0000000780000000 {
+ device_type = "memory";
+ reg = <0x00000007 0x80000000 0x80000000>;
+ };
+
+ soc {
+ uart0: uart at 4007000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
new file mode 100644
index 0000000..7e909ee
--- /dev/null
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -0,0 +1,239 @@
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang at linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/hip04-clock.h>
+
+/ {
+ /* memory bus is 64-bit */
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+ core1 {
+ cpu = <&CPU9>;
+ };
+ core2 {
+ cpu = <&CPU10>;
+ };
+ core3 {
+ cpu = <&CPU11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&CPU12>;
+ };
+ core1 {
+ cpu = <&CPU13>;
+ };
+ core2 {
+ cpu = <&CPU14>;
+ };
+ core3 {
+ cpu = <&CPU15>;
+ };
+ };
+ };
+ CPU0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ };
+ CPU1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ };
+ CPU2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <2>;
+ };
+ CPU3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <3>;
+ };
+ CPU4: cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x100>;
+ };
+ CPU5: cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x101>;
+ };
+ CPU6: cpu at 102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x102>;
+ };
+ CPU7: cpu at 103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x103>;
+ };
+ CPU8: cpu at 200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x200>;
+ };
+ CPU9: cpu at 201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x201>;
+ };
+ CPU10: cpu at 202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x202>;
+ };
+ CPU11: cpu at 203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x203>;
+ };
+ CPU12: cpu at 300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x300>;
+ };
+ CPU13: cpu at 301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x301>;
+ };
+ CPU14: cpu at 302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x302>;
+ };
+ CPU15: cpu at 303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x303>;
+ };
+ };
+
+ soc {
+ /* It's a 32-bit SoC. */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus", "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&gic>;
+ ranges = <0 0 0xe0000000 0x10000000>;
+
+ gic: interrupt-controller at c01000 {
+ compatible = "hisilicon,hip04-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <1 9 0xf04>;
+
+ /* gic dist base, gic cpu base */
+ reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
+ <0xc04000 0x2000>, <0xc06000 0x2000>;
+ };
+
+ sysctrl: sysctrl {
+ compatible = "hisilicon,sysctrl";
+ reg = <0x3e00000 0x00100000>;
+ relocation-entry = <0xe0000100>;
+ relocation-size = <0x1000>;
+ bootwrapper-phys = <0x10c00000>;
+ bootwrapper-size = <0x10000>;
+ bootwrapper-magic = <0xa5a5a5a5>;
+ };
+
+ fabric: fabric {
+ compatible = "hisilicon,hip04-fabric";
+ reg = <0x302a000 0x1000>;
+ };
+
+ clock: clock {
+ compatible = "hisilicon,hip04-clock";
+ /* dummy register */
+ reg = <0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ dual_timer0: dual_timer at 3000000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x3000000 0x1000>;
+ interrupts = <0 224 4>;
+ clocks = <&clock HIP04_CLK_50M>;
+ clock-names = "apb_pclk";
+ status = "ok";
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ uart0: uart at 4007000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x4007000 0x1000>;
+ interrupts = <0 381 4>;
+ clocks = <&clock HIP04_CLK_168M>;
+ clock-names = "uartclk";
+ reg-shift = <2>;
+ status = "disabled";
+ };
+ };
+};
--
1.8.3.2
More information about the linux-arm-kernel
mailing list