[PATCH 0/5] GPIO OMAP driver changes for v3.16

[Javier Martinez Canillas]

Hello Aaro,

Thanks a lot for testing the series!

On Thu, Apr 10, 2014 at 9:30 PM, Aaro Koskinen <aaro.koskinen at iki.fi> wrote:
> Hi,
>
> On Thu, Apr 10, 2014 at 07:29:26PM +0200, Linus Walleij wrote:
>> On Sun, Apr 6, 2014 at 4:58 PM, Javier Martinez Canillas
>> <javier.martinez at collabora.co.uk> wrote:
>>
>> > Now that you have sent your changes for v3.15 to Torvalds, here are some
>> > changes for the OMAP GPIO driver targeted to v3.16. Mostly improvements
>> > so nothing here is -rc material.
>>
>> I like this series so I have applied them for v3.16, pending some ACK
>> from Kevin &| Santosh.
>
> I tried these patches on OMAP1 on top of today's Torvalds git
> (4ba85265790ba3681deeaf73f018c0eb829a7341).
>
> On Amstrad E3 I'm getting the following logs:
>
> [    0.156491] omap_gpio omap_gpio.0: Runtime PM disabled, clock forced on.
> [    0.164604] genirq: Setting trigger mode 0 for irq 64 failed (gpio_irq_type+0x0/0x1f0)
> [    0.165418] genirq: Setting trigger mode 0 for irq 65 failed (gpio_irq_type+0x0/0x1f0)
> [    0.166133] genirq: Setting trigger mode 0 for irq 66 failed (gpio_irq_type+0x0/0x1f0)
> [    0.166838] genirq: Setting trigger mode 0 for irq 67 failed (gpio_irq_type+0x0/0x1f0)
> [...]
> [    0.182856] genirq: Setting trigger mode 0 for irq 79 failed (gpio_irq_type+0x0/0x1f0)
> [    0.186887] omap_gpio omap_gpio.1: Could not get gpio dbck
> [    0.189308] genirq: Setting trigger mode 0 for irq 95 failed (gpio_irq_type+0x0/0x1f0)
> [...]
> [    0.203121] genirq: Setting trigger mode 0 for irq 110 failed (gpio_irq_type+0x0/0x1f0)
>
> However it still seems to work. The serio is only GPIO IRQ and it
> triggers when I press the external keyboard.
>
> The same happens also on Nokia 770:
>
> [    0.118896] genirq: Setting trigger mode 0 for irq 128 failed (gpio_irq_type+0x0/0x220)
> [    0.119201] genirq: Setting trigger mode 0 for irq 129 failed (gpio_irq_type+0x0/0x220)
> [...]
> [    0.124999] genirq: Setting trigger mode 0 for irq 143 failed (gpio_irq_type
> +0x0/0x220)
> [    0.126831] omap_gpio omap_gpio.1: Could not get gpio dbck
> [    0.127258] OMAP GPIO hardware version 1.1
> [    0.127624] omap_gpio omap_gpio.2: Could not get gpio dbck
> [    0.128204] omap_gpio omap_gpio.3: Could not get gpio dbck
> [    0.128753] omap_gpio omap_gpio.4: Could not get gpio dbck
>
> Here also GPIO IRQs (touchscreen, Retu) still work.
>
> A.

I don't have those errors when booting on my DM3730 IGEPv2 board but
it seems that for some reason on omap1  __irq_set_trigger() complains
when IRQ_TYPE_NONE is used as a default flag when calling
gpiochip_irqchip_add()

Could you please test the following patch and tell me if your board
still works and makes the errors go away?

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 8cc9e91..5bc8aec 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1122,7 +1122,7 @@ static int omap_gpio_chip_init(struct gpio_bank *bank)

        ret = gpiochip_irqchip_add(&bank->chip, &gpio_irq_chip,
                                   irq_base, gpio_irq_handler,
-                                  IRQ_TYPE_NONE);
+                                  IRQ_TYPE_LEVEL_LOW);

        if (ret) {
                dev_err(bank->dev, "Couldn't add irqchip to gpiochip
%d\n", ret);

Best regards,
Javier