[RFC][PATCH 1/3] ARM: dts: vf610: Add Freescale FlexTimer Module timer node.

[Shawn Guo]

On Wed, Apr 16, 2014 at 10:19:45AM +0800, Xiubo Li wrote:
> Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Cc: Jingchang Lu <b35083 at freescale.com>
> ---
>  arch/arm/boot/dts/vf610.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
> index 107e2c0..c3a276f 100644
> --- a/arch/arm/boot/dts/vf610.dtsi
> +++ b/arch/arm/boot/dts/vf610.dtsi
> @@ -153,6 +153,19 @@
>  				clock-names = "pit";
>  			};
>  
> +			ftm0: ftm at 40038000 {
> +				compatible = "fsl,vf610-ftm-timer";
> +				reg = <0x40038000 0x2000>;
> +				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "ftm0", "ftm1",
> +					"ftm0_counter_en", "ftm1_counter_en";
> +				clocks = <&clks VF610_CLK_FTM0>,
> +					<&clks VF610_CLK_FTM1>,
> +					<&clks VF610_CLK_FTM0_EXT_FIX_EN>,
> +					<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
> +				status = "disabled";

For such completely internal block which has no pins route out on board,
we should probably just not have this "disabled" status line.

Shawn

> +			};
> +
>  			wdog at 4003e000 {
>  				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
>  				reg = <0x4003e000 0x1000>;
> -- 
> 1.8.4
> 
>