[PATCH v3 03/10] dmaengine: edma: Correct the handling of src/dst_maxburst == 0

[Peter Ujfalusi]

When clients asks for maxburst = 0 it is basically the same case as if they
were asking for maxburst = 1 since in both case ASYNC need to be used and
the eDMA is expected to write/read one word per DMA request.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
Acked-by: Joel Fernandes <joelf at ti.com>
---
 drivers/dma/edma.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index cd04eb7b182e..2742867fd1e6 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -285,6 +285,10 @@ static int edma_config_pset(struct dma_chan *chan, struct edmacc_param *pset,
 	int absync;
 
 	acnt = dev_width;
+
+	/* src/dst_maxburst == 0 is the same case as src/dst_maxburst == 1 */
+	if (!burst)
+		burst = 1;
 	/*
 	 * If the maxburst is equal to the fifo width, use
 	 * A-synced transfers. This allows for large contiguous
-- 
1.9.2