[PATCH] ARM: debug: qcom: make UART address selection configuration option
Ivan T. Ivanov
iivanov at mm-sol.com
Mon Apr 14 06:47:34 PDT 2014
From: "Ivan T. Ivanov" <iivanov at mm-sol.com>
Separate Qualcomm low-level debugging UART to two options.
DEBUG_MSM_UART is used in earlier non-multi platform arches,
like MSM7X00A, QSD8X50 and MSM7X30.
DEBUG_QCOM_UARTDM is used in multi-plafrom arches and have
embedded data mover.
Make DEBUG_UART_PHYS and DEBUG_UART_BASE user adjustable by
Kconfig menu.
Signed-off-by: Ivan T. Ivanov <iivanov at mm-sol.com>
---
arch/arm/Kconfig.debug | 81 ++++++++++++++++++--------------------------
arch/arm/include/debug/msm.S | 46 +++----------------------
arch/arm/mach-msm/Kconfig | 3 --
3 files changed, 38 insertions(+), 92 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4a2fc0bf..cdbfd8b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -349,56 +349,39 @@ choice
Say Y here if you want kernel low-level debugging support
on MMP UART3.
- config DEBUG_MSM_UART1
- bool "Kernel low-level debugging messages via MSM UART1"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
- select DEBUG_MSM_UART
+ config DEBUG_MSM_UART
+ bool "Kernel low-level debugging messages via MSM UART"
+ depends on ARCH_MSM
help
Say Y here if you want the debug print routines to direct
- their output to the first serial port on MSM devices.
+ their output to the serial port on MSM devices.
- config DEBUG_MSM_UART2
- bool "Kernel low-level debugging messages via MSM UART2"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
- select DEBUG_MSM_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the second serial port on MSM devices.
+ ARCH DEBUG_UART_PHYS DEBUG_UART_BASE #
+ MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
+ MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
+ MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
- config DEBUG_MSM_UART3
- bool "Kernel low-level debugging messages via MSM UART3"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
- select DEBUG_MSM_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the third serial port on MSM devices.
+ MSM7X30 0xaca00000 0xe1000000 UART1
+ MSM7X30 0xacb00000 0xe1000000 UART2
+ MSM7X30 0xacc00000 0xe1000000 UART3
- config DEBUG_MSM8660_UART
- bool "Kernel low-level debugging messages via MSM 8660 UART"
- depends on ARCH_MSM8X60
- select MSM_HAS_DEBUG_UART_HS
- select DEBUG_MSM_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM 8660 devices.
+ Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+ options based on your needs.
- config DEBUG_MSM8960_UART
- bool "Kernel low-level debugging messages via MSM 8960 UART"
- depends on ARCH_MSM8960
- select MSM_HAS_DEBUG_UART_HS
- select DEBUG_MSM_UART
+ config DEBUG_QCOM_UARTDM
+ bool "Kernel low-level debugging messages via QCOM UARTDM"
+ depends on ARCH_QCOM
help
Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM 8960 devices.
+ their output to the serial port on Qualcomm devices.
- config DEBUG_MSM8974_UART
- bool "Kernel low-level debugging messages via MSM 8974 UART"
- depends on ARCH_MSM8974
- select MSM_HAS_DEBUG_UART_HS
- select DEBUG_MSM_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM 8974 devices.
+ ARCH DEBUG_UART_PHYS DEBUG_UART_BASE
+ MSM8X60 0x19c40000 0xf0040000
+ MSM8960 0x16440000 0xf0040000
+ MSM8974 0xf991e000 0xfa71e000
+
+ Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+ options based on your needs.
config DEBUG_MVEBU_UART
bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
@@ -950,10 +933,6 @@ config DEBUG_STI_UART
bool
depends on ARCH_STI
-config DEBUG_MSM_UART
- bool
- depends on ARCH_MSM || ARCH_QCOM
-
config DEBUG_LL_INCLUDE
string
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
@@ -971,7 +950,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART
- default "debug/msm.S" if DEBUG_MSM_UART
+ default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/sti.S" if DEBUG_STI_UART
@@ -1035,6 +1014,7 @@ config DEBUG_UART_PHYS
default 0x80074000 if DEBUG_IMX28_UART
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+ default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
@@ -1050,6 +1030,7 @@ config DEBUG_UART_PHYS
ARCH_ORION5X
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HI3716_UART
+ default 0xf991e000 if DEBUG_QCOM_UARTDM
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfe800000 if ARCH_IOP32X
default 0xffc02000 if DEBUG_SOCFPGA_UART
@@ -1058,11 +1039,13 @@ config DEBUG_UART_PHYS
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
- DEBUG_UART_8250 || DEBUG_UART_PL01X
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xe0010fe0 if ARCH_RPC
+ default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf0009000 if DEBUG_CNS3XXX
default 0xf01fb000 if DEBUG_NOMADIK_UART
@@ -1078,6 +1061,7 @@ config DEBUG_UART_VIRT
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+ default 0xfa71e000 if DEBUG_QCOM_UARTDM
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
@@ -1116,7 +1100,8 @@ config DEBUG_UART_VIRT
default 0xff003000 if DEBUG_U300_UART
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
- DEBUG_UART_8250 || DEBUG_UART_PL01X
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
index 9d653d4..9ef5761 100644
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -15,51 +15,15 @@
*
*/
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50)
-#define MSM_UART1_PHYS 0xA9A00000
-#define MSM_UART2_PHYS 0xA9B00000
-#define MSM_UART3_PHYS 0xA9C00000
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define MSM_UART1_PHYS 0xACA00000
-#define MSM_UART2_PHYS 0xACB00000
-#define MSM_UART3_PHYS 0xACC00000
-#endif
-
-#if defined(CONFIG_DEBUG_MSM_UART1)
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART2)
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART3)
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE 0xF0040000
-#define MSM_DEBUG_UART_PHYS 0x19C40000
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE 0xF0040000
-#define MSM_DEBUG_UART_PHYS 0x16440000
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8974_UART
-#define MSM_DEBUG_UART_BASE 0xFA71E000
-#define MSM_DEBUG_UART_PHYS 0xF991E000
-#endif
-
.macro addruart, rp, rv, tmp
-#ifdef MSM_DEBUG_UART_PHYS
- ldr \rp, =MSM_DEBUG_UART_PHYS
- ldr \rv, =MSM_DEBUG_UART_BASE
+#ifdef CONFIG_DEBUG_UART_PHYS
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT
#endif
.endm
.macro senduart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ Write the 1 character to UARTDM_TF
str \rd, [\rx, #0x70]
#else
@@ -68,7 +32,7 @@
.endm
.macro waituart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
tst \rd, #0x08
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index a7f959e..9b26976 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -42,9 +42,6 @@ config ARCH_QSD8X50
endchoice
-config MSM_HAS_DEBUG_UART_HS
- bool
-
config MSM_SOC_REV_A
bool
--
1.8.3.2
More information about the linux-arm-kernel
mailing list