[PATCH 11/29] ARM: orion5x: convert DT to use the mvebu-mbus driver

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Sun Apr 13 07:39:48 PDT 2014


This commit switches the Orion5x Device Tree files to use the DT
representation and probing for the mvebu-mbus driver. The changes are
mainly:

 * Re-organize the DT to follow the same organization as the one used
   on Armada 370/XP, which is needed for mvebu-mbus to work: a
   top-level soc { ... } node, which corresponds to the MBus bus, and
   a sub-node internal-regs { ... } for all peripherals whose register
   sit only in the "Internal Register Window". This change re-indents
   by one level the definition of all nodes in the Device Tree, which
   explains the large change.

 * Use custom functions orion5x_dt_init_early() and
   orion5x_dt_init_time() instead of orion5x_init_early() and
   orion5x_timer_init() as we now want the MBus driver to be probed
   from the Device Tree. We still use the old-style timer
   initialization, but that will be changed in a followup commit.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 .../dts/orion5x-lacie-ethernet-disk-mini-v2.dts    |  23 +-
 arch/arm/boot/dts/orion5x-mv88f5182.dtsi           |  24 ++
 arch/arm/boot/dts/orion5x.dtsi                     | 245 +++++++++++----------
 arch/arm/mach-orion5x/board-dt.c                   |  19 +-
 4 files changed, 181 insertions(+), 130 deletions(-)
 create mode 100644 arch/arm/boot/dts/orion5x-mv88f5182.dtsi

diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 24f1ce7..d66d2fa 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -10,7 +10,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include "orion5x.dtsi"
+#include "orion5x-mv88f5182.dtsi"
 
 / {
 	model = "LaCie Ethernet Disk mini V2";
@@ -24,15 +24,20 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
-	ocp at f1000000 {
-		serial at 12000 {
-			clock-frequency = <166666667>;
-			status = "okay";
-		};
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>;
+
+		internal-regs {
+			serial at 12000 {
+				clock-frequency = <166666667>;
+				status = "okay";
+			};
 
-		sata at 80000 {
-			status = "okay";
-			nr-ports = <2>;
+			sata at 80000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
new file mode 100644
index 0000000..ddfb4d1
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
+
+		internal-regs {
+			mbusc: mbus-controller at 20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 2364e3d..31d46e6 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -8,6 +8,8 @@
 
 #include "skeleton.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	model = "Marvell Orion5x SoC";
 	compatible = "marvell,orion5x";
@@ -17,149 +19,154 @@
 		gpio0 = &gpio0;
 	};
 
-	ocp at f1000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x4000000
-		          0xf2200000 0xf2200000 0x0000800>;
-		#address-cells = <1>;
+	soc {
+		#address-cells = <2>;
 		#size-cells = <1>;
+		controller = <&mbusc>;
 
-		gpio0: gpio at 10100 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10100 0x40>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <6>, <7>, <8>, <9>;
-		};
-
-		spi at 10600 {
-			compatible = "marvell,orion-spi";
+		internal-regs {
+			compatible = "simple-bus";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			reg = <0x10600 0x28>;
-			status = "disabled";
-		};
-
-		i2c at 11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <5>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			gpio0: gpio at 10100 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0x10100 0x40>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <6>, <7>, <8>, <9>;
+			};
 
-		serial at 12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <3>;
-			/* set clock-frequency in board dts */
-			status = "disabled";
-		};
+			spi at 10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				reg = <0x10600 0x28>;
+				status = "disabled";
+			};
 
-		serial at 12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <4>;
-			/* set clock-frequency in board dts */
-			status = "disabled";
-		};
+			i2c at 11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <5>;
+				clock-frequency = <100000>;
+				status = "disabled";
+			};
 
-		intc: interrupt-controller at 20200 {
-			compatible = "marvell,orion-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20200 0x08>;
-		};
+			serial at 12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <3>;
+				/* set clock-frequency in board dts */
+				status = "disabled";
+			};
 
-		wdt at 20300 {
-			compatible = "marvell,orion-wdt";
-			reg = <0x20300 0x28>;
-			status = "okay";
-		};
+			serial at 12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <4>;
+				/* set clock-frequency in board dts */
+				status = "disabled";
+			};
 
-		ehci at 50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <17>;
-			status = "disabled";
-		};
+			intc: interrupt-controller at 20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x08>;
+			};
 
-		xor at 60900 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60900 0x100
-			       0x60b00 0x100>;
-			status = "okay";
+			wdt at 20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>;
+				status = "okay";
+			};
 
-			xor00 {
-			      interrupts = <30>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+			ehci at 50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <17>;
+				status = "disabled";
 			};
-			xor01 {
-			      interrupts = <31>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+
+			xor at 60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor00 {
+				      interrupts = <30>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				};
+				xor01 {
+				      interrupts = <31>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				      dmacap,memset;
+				};
 			};
-		};
 
-		eth: ethernet-controller at 72000 {
-			compatible = "marvell,orion-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72000 0x4000>;
-			marvell,tx-checksum-limit = <1600>;
-			status = "disabled";
-
-			ethernet-port at 0 {
-				compatible = "marvell,orion-eth-port";
-				reg = <0>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				/* set phy-handle property in board file */
+			eth: ethernet-controller at 72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethernet-port at 0 {
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					/* set phy-handle property in board file */
+				};
 			};
-		};
 
-		mdio: mdio-bus at 72004 {
-			compatible = "marvell,orion-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72004 0x84>;
-			interrupts = <22>;
-			status = "disabled";
+			mdio: mdio-bus at 72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <22>;
+				status = "disabled";
 
-			/* add phy nodes in board file */
-		};
+				/* add phy nodes in board file */
+			};
+
+			sata at 80000 {
+				compatible = "marvell,orion-sata";
+				reg = <0x80000 0x5000>;
+				interrupts = <29>;
+				status = "disabled";
+			};
 
-		sata at 80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <29>;
-			status = "disabled";
+			ehci at a0000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0xa0000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
 		};
 
 		crypto at 90000 {
 			compatible = "marvell,orion-crypto";
-			reg = <0x90000 0x10000>,
-			      <0xf2200000 0x800>;
+			reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
+			      <MBUS_ID(0x09, 0x00) 0x0 0x800>;
 			reg-names = "regs", "sram";
 			interrupts = <28>;
 			status = "okay";
 		};
-
-		ehci at a0000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xa0000 0x1000>;
-			interrupts = <12>;
-			status = "disabled";
-		};
 	};
 };
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index c134a82..f6a388a 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -15,10 +15,14 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/cpu.h>
+#include <linux/mbus.h>
 #include <asm/system_misc.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
+#include <plat/time.h>
 #include "common.h"
 
 static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
@@ -31,6 +35,17 @@ static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
 	{},
 };
 
+static void orion5x_dt_init_early(void)
+{
+	orion_time_set_base(TIMER_VIRT_BASE);
+}
+
+static void orion5x_dt_init_time(void)
+{
+	orion5x_timer_init();
+	BUG_ON(mvebu_mbus_dt_init());
+}
+
 static void __init orion5x_dt_init(void)
 {
 	char *dev_name;
@@ -71,9 +86,9 @@ static const char *orion5x_dt_compat[] = {
 DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)")
 	/* Maintainer: Thomas Petazzoni <thomas.petazzoni at free-electrons.com> */
 	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
+	.init_early	= orion5x_dt_init_early,
 	.init_irq	= orion_dt_init_irq,
-	.init_time	= orion5x_timer_init,
+	.init_time	= orion5x_dt_init_time,
 	.init_machine	= orion5x_dt_init,
 	.restart	= orion5x_restart,
 	.dt_compat	= orion5x_dt_compat,
-- 
1.8.3.2




More information about the linux-arm-kernel mailing list