[PATCH 1/4] mmc: sdhci: add a driver for Berlin SoCs
Antoine Ténart
antoine.tenart at free-electrons.com
Wed Apr 16 05:40:08 PDT 2014
Add a Driver to support the SDHCI controller of the Marvell Berlin SoCs.
This controller supports 3 sockets.
Signed-off-by: Antoine Ténart <antoine.tenart at free-electrons.com>
---
drivers/mmc/host/Kconfig | 11 ++++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-berlin.c | 129 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 141 insertions(+)
create mode 100644 drivers/mmc/host/sdhci-berlin.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1384f67abe21..42db70031eb2 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -283,6 +283,17 @@ config MMC_SDHCI_BCM2835
If unsure, say N.
+config MMC_SDHCI_BERLIN
+ tristate "Marvell Berlin SD/MMC Host Controller support"
+ depends on ARCH_BERLIN
+ depends on MMC_SDHCI_PLTFM
+ select MMC_SDHCI_IO_ACCESSORS
+ help
+ This selects the Berlin SD/MMC controller. If you have a Berlin
+ platform with SD or MMC devices, say Y or M here.
+
+ If unsure, say N.
+
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3483b6b6b880..b0256290530c 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
+obj-$(CONFIG_MMC_SDHCI_BERLIN) += sdhci-berlin.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
diff --git a/drivers/mmc/host/sdhci-berlin.c b/drivers/mmc/host/sdhci-berlin.c
new file mode 100644
index 000000000000..ece8f7863937
--- /dev/null
+++ b/drivers/mmc/host/sdhci-berlin.c
@@ -0,0 +1,129 @@
+/*
+ * Marvell Berlin SDHCI driver
+ *
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Ténart <antoine.tenart at free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "sdhci-pltfm.h"
+
+static struct sdhci_ops sdhci_berlin_ops = {
+ .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+};
+
+static struct sdhci_pltfm_data sdhci_berlin2_pdata = {
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ SDHCI_QUIRK_BROKEN_ADMA |
+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
+ .ops = &sdhci_berlin_ops,
+};
+
+static struct sdhci_pltfm_data sdhci_berlin2q_pdata = {
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
+ .ops = &sdhci_berlin_ops,
+};
+
+static const struct of_device_id sdhci_berlin_of_match_table[] = {
+ {
+ .compatible = "marvell,berlin2-sdhci",
+ .data = &sdhci_berlin2_pdata,
+ },
+ {
+ .compatible = "marvell,berlin2cd-sdhci",
+ .data = &sdhci_berlin2_pdata,
+ },
+ {
+ .compatible = "marvell,berlin2q-sdhci",
+ .data = &sdhci_berlin2q_pdata,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sdhci_berlin_of_match_table);
+
+static int sdhci_berlin_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct clk *clk;
+ const struct of_device_id *device =
+ of_match_device(sdhci_berlin_of_match_table, dev);
+ int ret;
+
+ host = sdhci_pltfm_init(pdev,
+ (struct sdhci_pltfm_data *)device->data, 0);
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "could not get clock: %ld\n", PTR_ERR(clk));
+ ret = PTR_ERR(clk);
+ goto err_clk_get;
+ }
+
+ clk_prepare_enable(clk);
+ pltfm_host->clk = clk;
+
+ sdhci_get_of_property(pdev);
+
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_add_host;
+
+ return 0;
+
+err_add_host:
+ clk_disable_unprepare(pltfm_host->clk);
+err_clk_get:
+ sdhci_pltfm_free(pdev);
+
+ return ret;
+}
+
+static int sdhci_berlin_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ sdhci_pltfm_unregister(pdev);
+ clk_disable_unprepare(pltfm_host->clk);
+
+ return 0;
+}
+
+static struct platform_driver sdhci_berlin_driver = {
+ .driver = {
+ .name = "berlin-sdhci",
+ .owner = THIS_MODULE,
+ .pm = SDHCI_PLTFM_PMOPS,
+ .of_match_table = sdhci_berlin_of_match_table,
+ },
+ .probe = sdhci_berlin_probe,
+ .remove = sdhci_berlin_remove,
+};
+module_platform_driver(sdhci_berlin_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for Marvell Berlin SoC");
+MODULE_AUTHOR("Antoine Ténart <antoine.tenart at free-electrons.com>");
+MODULE_LICENSE("GPL");
--
1.8.3.2
More information about the linux-arm-kernel
mailing list