[PATCH 1/8] ARM: at91: sama5d3: add DMA property for SSC devices

[Nicolas Ferre]

On 17/03/2014 10:45, Bo Shen :
> Add DMA property for SSC devices on SAMA5D3 SoC.
> 
> Signed-off-by: Bo Shen <voice.shen at atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

> ---
> 
>  arch/arm/boot/dts/sama5d3.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index 3d5faf8..3e753e1 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -113,6 +113,9 @@
>  				compatible = "atmel,at91sam9g45-ssc";
>  				reg = <0xf0008000 0x4000>;
>  				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
> +				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
> +				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
> +				dma-names = "tx", "rx";
>  				pinctrl-names = "default";
>  				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
>  				clocks = <&ssc0_clk>;
> @@ -231,6 +234,9 @@
>  				compatible = "atmel,at91sam9g45-ssc";
>  				reg = <0xf800c000 0x4000>;
>  				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
> +				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
> +				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
> +				dma-names = "tx", "rx";
>  				pinctrl-names = "default";
>  				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
>  				clocks = <&ssc1_clk>;
> 


-- 
Nicolas Ferre