[PATCH 1/2] clk: socfpga: add divider registers to the main pll outputs

[Dinh Nguyen]

On 04/16/2014 03:49 PM, Steffen Trumtrar wrote:
> Hi!
>
> On Wed, Apr 16, 2014 at 03:23:11PM -0500, Dinh Nguyen wrote:
>>
>>
>> On 04/16/2014 03:14 PM, dinguyen at altera.com wrote:
>>> From: Dinh Nguyen <dinguyen at altera.com>
>>>
>>> The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main
>>> PLL go through a pre-divider before coming into the system. These registers
>>> were hidden for the CycloneV platform, but are not used for the ArriaV
>>
>> Sorry but this should be "but are now used"
>>
>
> ???
>
> I don't get it. Do we have these registers on the cyclone V AND arria V or do
> we only have them on the arria V ?

These registers are there for both CycloneV and ArriaV.They are 
configured by the preloader, so it was "hidden" as a fixed-divider. I 
could have designated these values as fixed for the ArriaV as well, but 
it would be better if I just read this "hidden" register to get the 
divider value.

Dinh
>
> IIRC I had made a patch that adds dividers to some place in the clocktree, but
> I can't remember if these are the same.
>
> Regards,
> Steffen
>
>>> platform.
>>>
>>> This patch updates the clock driver to read the div-reg property for the
>>> socfpga-periph-clk clocks. Also moves the div_mask define to clk.h for re-use.
>>>
>>> Signed-off-by: Dinh Nguyen <dinguyen at altera.com>
>