[PATCH V2 14/17] ARM: exynos: cpuidle: Move the boot vector in pm.c
Daniel Lezcano
daniel.lezcano at linaro.org
Fri Apr 4 06:43:06 PDT 2014
As usual, move the boot vector setting in the pm.c file and use the cpu_pm
notifier to set it up.
Remove the unused headers.
Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar at linaro.org>
---
arch/arm/mach-exynos/cpuidle.c | 23 -----------------------
arch/arm/mach-exynos/pm.c | 15 +++++++++++++++
2 files changed, 15 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 44d169b..4b94181 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -8,46 +8,23 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/time.h>
#include <linux/platform_device.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
-#include <asm/unified.h>
#include <asm/cpuidle.h>
#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
#include "common.h"
-#include "regs-pmu.h"
-
-#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
- (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
-#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
- (S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
static int idle_finisher(unsigned long flags)
{
-
- __raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
- __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
-
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
-
cpu_do_idle();
-
return 1;
}
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 90fb692..e4ecd8c 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -172,6 +172,20 @@ static void __init exynos5_core_down_clk(void)
__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
}
+#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+ (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
+
+#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+ (S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
+
+static void exynos_cpu_set_boot_vector(void)
+{
+ __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
+ __raw_writel(S5P_CHECK_AFTR, EXYNOS_BOOT_VECTOR_FLAG);
+}
+
static int exynos_cpu_suspend(unsigned long arg)
{
#ifdef CONFIG_CACHE_L2X0
@@ -387,6 +401,7 @@ static int exynos_cpu_pm_notifier(struct notifier_block *self,
exynos_cpu_save_register();
exynos_set_wakeupmask();
}
+ exynos_cpu_set_boot_vector();
break;
case CPU_PM_EXIT:
--
1.7.9.5
More information about the linux-arm-kernel
mailing list