[PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support

[Alexandre Belloni]

On 13/04/2014 at 10:32:09 +0200, Alexander Stein wrote :
> On Saturday 12 April 2014, 14:48:17 wrote Alexander Shiyan:
> > Sat, 12 Apr 2014 12:42:18 +0200 от Alexander Stein <alexanders83 at web.de>:
> > > On Saturday 12 April 2014, 14:31:28 wrote Alexander Shiyan:
> > > > Sat, 12 Apr 2014 11:08:26 +0200 от Alexander Stein <alexanders83 at web.de>:
> > > > > Signed-off-by: Alexander Stein <alexanders83 at web.de>
> > > > > ---
> > > > >  .../devicetree/bindings/sound/atmel_ac97c.txt      | 20 +++++++++
> > > > >  sound/atmel/ac97c.c                                | 52 ++++++++++++++++++++--
> > > > >  2 files changed, 69 insertions(+), 3 deletions(-)
> > > > >  create mode 100644 Documentation/devicetree/bindings/sound/atmel_ac97c.txt
> > > > > 
> > > > > diff --git a/Documentation/devicetree/bindings/sound/atmel_ac97c.txt b/Documentation/devicetree/bindings/sound/atmel_ac97c.txt
> > > > > new file mode 100644
> > > > > index 0000000..9839403
> > > > > --- /dev/null
> > > > > +++ b/Documentation/devicetree/bindings/sound/atmel_ac97c.txt
> > > > > @@ -0,0 +1,20 @@
> > > > > +* Atmel AC97 controller
> > > > > +
> > > > > +Required properties:
> > > > > +  - compatible: "atmel,atmel_ac97c"
> > > > > +  - reg: Address and length of the register set for the device
> > > > > +  - interrupts: Should contain AC97 interrupt
> > > > > +  - atmel,reset-pin: GPIO for resetting the codec
> > > > 
> > > > Why standard "gpios" property cannot be used here?
> > > 
> > > I guess they can. I have no experience defining a devicetree binding, so I just stuck to the platformdata member name.
> > > If this is the recommended way, I'll gladly change that.
> > 
> > Another question is whether this property should refer to the controller,
> > as it is clear that it refers to the codec ....
> 
> AFAICT the codec itself has no representation in the devicetree. It gets detected by the controller which uses the reset GPIO.
>

Yeah, maybe we can already go for ac97-gpios, there. It actually takes a
list of gpios: ac97-sync, ac97-sdata and ac97-reset. You may want to
have a look at Documentation/devicetree/bindings/sound/soc-ac97link.txt
and snd_soc_set_ac97_ops_of_reset(), snd_soc_ac97_parse_pinctl() in
sound/soc/core.c

The goal would be to be able to keep the same bindings when switching
over to ASoC.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com